How to Tint a Back Window

Подписаться 281 тыс.

Просмотров 2,3 млн

50% 1

List of my recommended tint tools! - bit.ly/2WvWa4K
Tool Apron tintdepot.com/product/scf-96-...
Shank tintdepot.com/product/shank/
Felt Card tintdepot.com/product/felt-sq...
Heat Gun tintdepot.com/product/wagner-...
Spray Tank tintdepot.com/product/5-gallo...
Spray Bottle tintdepot.com/product/polyspr...
Scrub Paddle tintdepot.com/product/the-scr...
Scrub Pad tintdepot.com/product/white-s...
Red Dot Knife tintdepot.com/product/nt-pro-...
NT Blades tintdepot.com/product/nt-ba50...
Conqueror tintdepot.com/product/the-con...
Bulldozer tintdepot.com/product/the-bul...
Flat out Yellow tintdepot.com/product/5-yello...
Hybrid tintdepot.com/product/5-hybri...
Fusion Handle tintdepot.com/product/5-fusio...
Side swipe tintdepot.com/product/side-sw...
Blue Max tintdepot.com/product/angled-...
Green tail fin tintdepot.com/product/tail-fi...
Tri edge x yellow tintdepot.com/product/tri-edg...
Tri edge orange tintdepot.com/product/tri-edg...
Tri edge pink tintdepot.com/product/tri-edg...
Ez reach tintdepot.com/product/origina...
Mac tac tintdepot.com/product/mactac-...
Gray lidco tintdepot.com/product/lidco-s...
Gator blade tintdepot.com/product/gator-b...

Авто/Мото

Опубликовано:

12 дек 2010

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 738

@agm6095 5 лет назад

A professional makes difficult things look easy.

@wetae6406 4 года назад

Its not difficult fr took me 1 full consistent month before this video

@johndoliver8233 2 года назад

theres always that ONE guy

@Keijotti 2 года назад

@@wetae6406 i never did tinting and they turned so good

@wigsplitter777 2 года назад

A amateur makes easy things look difficult

@ucf1206 12 лет назад

This is a great video! Just tinted the back window on my 2009 TSX using this video. It came out perfect! I used precut Llumar CTX file. Your tip on letting the dryer sheet dry all the way before placing the tint on and then making sure all the fingers are vertical made all the difference.

@garrettsctt 5 лет назад

Thanks a bunch for the videos. Im prettt mechanically inclined and i do a bunch of work on my vehicles my self but tint has allways been one of those things that i would never attempt my self but after watching your videos and having you explain how its done. I definitely have the confidence to tint my windows my self

@xxslayakidXx 11 лет назад

i feel like the hardest part is taking the tint and putting it on the inside...idk how u do this by yourself but props to u man!

@djkswift1 12 лет назад

Yo man thanks alot. I started using your method with the hard card and now my shrinking is 100 times faster. I shrank a 95 saturn back window today with this method and i was pretty freking impressed. Shout out to you man you are a great tinter!!!

@richb7414 9 лет назад

You are my Hero!! Those headrests were super high and you got that tint in there and worked around them. wow. I remove the headrests. Even one's that aren't removable will come out, you just need to know where the c-clip is and shove a hanger down in there.

@Rustin-wy6yf 4 года назад

I did this with a hair dryer. No creases just took forever as I had to hold the dryer right up against the tint which caused it to overheat a couple of times (I really need to invest in a heat gun). I’m happy to say my first attempt came out perfectly with no creases at all. Thanks

@Hahabunks 11 лет назад

These vids are awesome man. Ive been tinting for 6 months now and every night i get o youtube to see what i can do better. To the people that are asking what temp to run the heat gun, i run mine on the hottest it can go. But you have to be carefull. Burning tint can easily be done. Mess around with the setting on yoiur gun and see what you feel comfortable with! The hotter, the faster the tint will shrink and can have a higher chance at creasing.

@TheSuperWilliedog 12 лет назад

its amazing how some people do it in section and it takes twice the time but Matt you know what your doing and are very technical at doing it. nice

@dadygee 3 года назад

You learn something every day. Today I learned to cut the plastic on the outside first.. I always had problems with the corners before.. Now i know why :)

@sylithwaltz2794 10 месяцев назад

just did mine a couple mins ago for the first time ever, used a blowtorch instead of a heat gun (i dont own one) and it came out okay! thank you for an easy to follow video.

@payomedina3651 6 лет назад

This was a very good video. You were specific about what needed to be done. And sped up the parts we did not really have to see. Great job. 👍

@pierredeshotels8434 5 лет назад

Amazing Video!! Cant thank you enough for your videos. You are helping millions of people!!! I wish you the best in all of your endeavors

@jprox113 Год назад

Thanks for the video. I followed same procedure on my saab and worked perfect. First time tinting.

@FrenchVries 10 лет назад

Jeez dude nice job, and i thought applying the screenprotector to my phone was hard ahah

@alphaomega8493 9 лет назад

ricerust Others seemed to get the guy's comment except for one single latent homosexual like yourself.

@Sancho18003 8 лет назад

hahaha... same here! that was the first thing that came to my mind

@FrenchVries 8 лет назад

Damn this is old haha. Still valid though lolol

@kathieduarte85 7 лет назад

Orlando Moran

@richh9590 6 лет назад

lmao

@ieshiaaa 9 лет назад

So simple and such good work... Glad I saw this! Now I'm ready to give it a try.

@wfrm21.3 10 лет назад

Man.. you make it look easy. pritty boss if you ask me, shur givin me confidence to tackle my back window.

@anonymousjohndoe Год назад

You make it look easy. Thanks for the tips. I've gone through several rolls but am getting better.

@DCW914 12 лет назад

Awesome. It's the little tricks which make the proffessional. Always wondered why my windows looked like ass. Was just getting ready to do my 2 suburban rear quarter windows and they'r e huge. This will make all the difference. Thx.

@foxracing500r6 5 лет назад

Subbed!! I don’t subscribe to many people, you’re thorough and informative.

@Imtheboss333 5 лет назад

No bubbles!!! Looked soo easy. I know its not gonna be when I do it!. But thanks!! Great Job!!!!

@RemoteExplode 8 лет назад

Ha! -I know this is a bit "old" by most folks, but Dude, you do some great work. And your vids are Quite helpful. THANK YOU! Cheers!

@lisamurray7281 10 лет назад

Thank you for your help. Wanted to pull my hair out till tour video helped me. Learned alot.

@mukewa0zw 11 лет назад

...you make this look so easy! I wish you were closer to do this task I have burdened myself with!

@alexnelson09 12 лет назад

Hey great vid, I watched this over and over a year ago and tinted my whole car with a roll of llumar and it came out great! I had to do the rear window three times before I was completely happy with it haha a year later and it all looks good and is holding up great. Thanks tint dude

@cpichette1 11 лет назад

you make tinting look way too easy. awesome job!

@issambannout2490 9 лет назад

one the best clips, simple short and straight forward.

@Daddy12117 10 лет назад

been a while, glad i watched another video to remind me how to do it properly so I won't mess or jack up the window tint.

@wp11302000 12 лет назад

I have been studying this vid and your technique and I finally got a good shrink on the top half of my car, got it to lay down perfectly flat all around. I'm doing it in two pieces and now the bottom is giving me problems. I think it's creasing because I'm hitting the tint that isn't hot yet. Maybe going a lil to fast. This video helped a TON though. I'm still working at it.

@normant5056 3 года назад

The light trick is great. I was wondering how i was going to see where to cut. I was going to do it the super hard way with measuring. I have a 2015 200s and the bottom was going to be difficult as it has curves. But this was will make it easy. Thank you.

@djkswift1 12 лет назад

Yo man very good video. I have been tinting for 5 years and i have always used a glove with baby powder h pattern. Im going to give the dryer sheet and hard card a try after watching you do that. Thanks for the vid man and keep it up!!

@noemah3272 2 года назад

I have window tint 36in long top-to-bottom my. Rear windows 37-in help do I start from the top and leave that bottom and showing?

@general4197 Год назад

11 years old and still a great video. thanks.

@JoeDebie 8 лет назад

Well that sure makes it look easy. Can't wait to try it out. I wonder if you can shrink any film or does it have to be one that is designed for that purpose.

@normn8379 9 лет назад

Hello! I have a question. What or because you cover the glass? I see that it dries.

@enricod2061 4 года назад

When I was heat shrinking mine, the tint wouldn’t smoothen out and flaten to the edges . What could cause that?

@bennynthejets81 10 лет назад

Thanks for the great videos. You make it look so easy.

@Notalliswhatitseems 3 года назад

Finally a short and to the point video. awesome. 506 people couldnt see the Like button through all that epic tinting.

@nazojack3920 Год назад

Hello, i have question about tinting the back window.. what will happen for the defrost line after removing the tint??

@99baggedmazda 2 года назад

Cool I was confused about where to cut cause of the dot matrix and any other videos I watched told you exactly where and how much to cut, so thank you for sharing awesome job 🤙🤙

@GeorgeAirforceLove 10 лет назад

is it possible to show us the same thing on a back window that is not so flat? Also is it possible to show us the "dry action" from the insight? What material is the spray of? Thanks in advance

@SR-kf8xz 3 года назад

Great videos I have learned lots form you, Question about dot matrix on back windows do you just cut on the edge of the matrix or try and cover it so you dont see the white line around the glass. Im having a hard time with the dots im either to far into it and it won't stick or not enough where I can see light or white border and tips

@ArtPadillaJr 4 года назад

Do you have to sand or prep the De-Frosters on back windows to prevent the tint from peeling? I seen some guy sand them or prep them so they weren’t so smooth so the adhesive will bond better.

@rs7997 3 года назад

I have a jetta VI and I have got very big bubbles on the back window! I have a question is it OK if I install the film over the window (outside) ? Because pulling the old tint can break the heaters (defrost)! Right! Any suggestions? Thanks

@blackyeti-qv8cb 2 года назад

My back windows never shrink like I want I always have to cut them in strips but I wanna start doin one piece rear windows wats wild is I have no problems with front windshields

@dominicrivers9587 5 лет назад

Amazing work. Can you tell what tools I need starting out?

@Nohandleneeded101 7 лет назад

I have tried to shrink my rear window and it shrinks with horizontal fingers? Cheap tint do you think ?

@Fele221 Год назад

I tried to do it but the tint damaged 2 times. I don't have a blower. could it be a hair blower?

@mariuszmatysiak3651 4 года назад

Hi. What you use before you put on the windows film?? Has to by dry or littybit wet?? before you gonna start with heater.

@ykywi 12 лет назад

thanks for the video and the explanation of how to shrink the back window. I'm going to give it a shot tomorrow.

@13116eja 12 лет назад

good video very detailed and thanks for the dry sheet tip. will try to do my windows this summer. thanks.

@NewShockerGuy 5 лет назад

How does one shrink the rear film when you have a rear wiper on the back of the window?

@sridharthati7132 10 лет назад

wen i am tinting back window r side window there is so many air babbuls coming wat will i do

@nismofunes 13 лет назад

4:39 wihch tool you are using cause i need soemthing like that... sometimes the bulldozer it is not enough.

@creatiff4325 3 года назад

Wish I would have watched this before going through a roll a tint. Thank you will try again soon

@AutomotivEivind 11 лет назад

Help!! I can't get dryer sheets where I live (Norway - at least no place I know have them). Can I use a solution of liquid fabric softener (for use in washing machine)?

@joebmxx 8 месяцев назад

I tried this exact same technique and the film just creases while trying to iron it out? Do I have bad film or something...

@Bogzter9 13 лет назад

@85asad hair dryer don't work cause i tried it my self yesterday and i failed it did not produce enough heat to shrink down the film.:(

@camaroiowaguy23 6 лет назад

i just bought pre cut tint from ebay. i instpected it to see its all there and the right % then rolled it back up into the tube. this is my first tint job so im learning all i can before i commit to doing it. im doing this because the shops in my area want atleast $250.. well i spent $25 for the tint so.. but id like to see the process and get info before applying. 3% baby shampoo and the rest distilled water? or is regular tap water ok too? also my 2 back door windows dont roll down so im not sure how im going to do this.

@randalrobbins5680 9 лет назад

HEY CAN YOU SHOW HOW TO TINT THE SIDE WINDOWS OF THIS IMPALA PLEASE???

@badbarada 11 лет назад

Sorry for answering your question even though it wasn't addressed to me. I think he does it the same way just cuts out excessive film from outside using the light from inside 1:08 and then from 2:13 to 3:15 and when you are done shrinking just go along the edges of the stop light. It's just a guess. I can be wrong but i would do it this way.

@satindersingh7325 2 года назад

what did you spray on rear window before shrinking the film. What brand films do you use. Thanks

@johnmcadden3404 6 лет назад

If you buy a precut kit do you still have to shrink it?

@21x1jamesy 11 лет назад

What adhesive is the best thing to use on the back window to make the tint stick down best and shrink??

@thamwaikeong5885 6 лет назад

Those 8-inch wide tint films which they stick to the top front of the windscreen to block the evening sun. How do you apply those ? It seems those accessory shops apply some water or soapy water to the back to stick it ?

@vivian26555 3 года назад

Don’t know if this was asked but is the protective clear film down on the glass or the actual tint?

@ahmedbsharat6036 5 лет назад

Excellent job I wish you the best from all my heart🤗🤗🤗

@ntryzm 12 лет назад

I tinted my rear a week ago, looked mint. Now from the inside I can see where I heat shrunk the fingers. Any ideas on what went wrong?

@elmangador7 9 лет назад

Whats up man, I have a question what squeegee did you use to squeegee the bottom part of the glass cause ive having a lot of issues with that and i saw you had a long white one.. Where could i get that? Thank you

@RJacobs8907 13 лет назад

@TintStuff Hey thanks man!! I watched and you just do awesome work all around! If you were local i'd let you tint up my truck lol but with videos like this I should be able to do it in the driveway.. Thanks again man and keep up the awesome work!

@gregkutyla8408 5 лет назад

Frkin amazing...u r da man, I wish you would be living near by, you would get my business for sure!

@jako3214 2 месяца назад

Great video! Got this done today at the Honda dealership. However after l left lifted my trunk & saw some water/moisture in there. Of course, called the dealership & claimed it wasn't 'unusual' & legit didn't seem too concerned but just wanna sure if that is a semi common thing to happen?

@jokes646 12 лет назад

U get down bro I've learned alot from u keep up the great work .

@Cargeek88 4 года назад

Do you have to do the same thing with pre cut tint as well?

@DKapayou 11 лет назад

good quality video. very informative, to the point, and your speaking was easy to understand.

@albertr2212 6 лет назад

if tinting the back windows,, is there gaskets on the windows that needs to be removed?

@lupe21nsn 12 лет назад

hi matt, i recently did a rear window on a 02 civic sedan and i keep trying the dry shrinking method and i keep getting fingers that span out like a tree horizontally , how come this keeps occuring ?

@Dman90 5 лет назад

Can u heat shrink any type of tint?or is it a special one?

@diofer8728 5 лет назад

Great job. I want to do it to my car but where can I buy the tint sheet here in LA CA?

@portugal82 12 лет назад

you SOB, this is a brilliant way of doing tint, thank you so much for posting this video. kick ass.

@billythekid2594 2 года назад

2021

@allencoolman3330 4 месяца назад

Thank you ! And cause you gave me great advice I’ll give you some Try removing the head rests next time

@danb9818 2 года назад

This is the exact car that I’m tinting tomorrow for my sister 😂 thank you for the vid

@andradegreen1121 8 лет назад

good job . one time hi tint my back window and hi cut the tint in (3) never look that good. so where can i get the stuff to buy? im going to try to tint my car like way you do that car.....

@XWarrior920x 13 лет назад

With this video I just saved about 200 much needed bucks. Great vid on how to do this!

@tervanun24 10 лет назад

Just tried this method on a rear window of a civic.... Didn't quite work out.... Does cheap tint not react well to tinting or do I just suck that bad?

@erikyam3078 7 лет назад

if it was already on why he took it off and put some water on i dont get it its looked good when he placed it with the heat gun someone explainnnnn plz

@sailava88 9 лет назад

Hi, I try to shrink several time but every think get failed! Basically it's getting bent, can you give me any spacial way to do?

@greenmounting4502 11 лет назад

Thanks . In my experience the back window we can't tint from inside because when you tern the hit nit on the hit nit break down or the window crash down

@aznp33nRocket 9 лет назад

Cool technique. For your rear installation, have you tried a cross starting from the middle? I've noticed it helps lay the film easier, especially on more curved rear windows. I did your method but noticed sometimes tension was created at corners of window. Again this is on more curved rear windows like a 2 door cobalt, especially for older corvette "superman" rear windows. How long you been tinting bro? You do an excellent shrink.

@jw200 9 лет назад

Do i really have to tint both sides of rear window? Do i really have to use heatgun? I must buy one. Just dont have it atm.

@richh9590 6 лет назад

I'm gonna try it soon an my Audi a5 but I am nervous about damaging the car. nice vid tho, thanks

@alexf1066 3 года назад

Good jod, made transferring the sheet inside the car look so easy (didn’t even remove the headrests). What was the tint. A lot of cheap stuff out there that creases and can’t be removed

@ROBOCOP603 12 лет назад

@TintStuff Do you have a tutorial on how to wet shrink the tint? If not do you know where I could find one? And what I meant be my last question in the previous comment was when I'm all done shrinking the tint does the side of the tint that was the adhesive side absolutely have to be facing the plexiglass, or is there a way to make it stuck to it otherwise? I was thinking maybe the kind of solution used to molecularly bind plexiglass could be used to bind plexiglass to the tint.

@yemenhar 13 лет назад

what did you put to the windows that's going to make it easier to shrink before you put the film? baking powder? or soap? and how do you make the thing you put completely dry before you put the tint on?

@minarizk7589 5 лет назад

wow so good . please tell me how i can get the tools or what is tool name thanks alot

@KryssTheBeastKross 12 лет назад

where can i get window tint that fits the whole back window? i recently did my back window and i had to use two pieces of tint to cover the whole window. so where could i get tint for one piece insted of two?