Crazy TIGHT Audi Back Window Tint! 

I like these quick little videos short n straight to the points and very good helpful tips

i got a 96 Audi A4 and gotta re-do the back glass because I creased it all over the place and didnt do the shrinking step before mounting it inside, got a new tint sheet and some better tools. Hope it goes nicely.

Was a good explication thanks to share with me 🔥🔥🔥

What brand tint do you use the shrinking looked so easy and fast

Can you use a hair dryer too? If you don’t have heat gun

this was a great one on a back window. You make it look way easier than what it actually is! Because you have to crawl in the back and all the while keeping the tint from brushing up against any fabric or anywhere it could pick up trash, and the last move to getting it started on the bottom of the window has to be just as difficult. I think If I were having to do that move, I would put some of that carpet protector down you use on the doors to make sure if I did let it sag too much it would touch the plastic and not something that, more than likely, has dust and dirt on it. You make it look way easier than it is.

great job ! what is the white bands name ?

What brand of tint film is the best for shrinking?

How do you get rid of the dot line?

does it matter what brand of dryer sheet you use? I don't even use them in my laundry anymore. I use liquid Downey anymore since a woman at a laundry matt got me started using it. The funny thing is in the videos I've heard you talk about doing that to the front and back windows to shrink the film, I never once thought of an actual dryer sheet in the terms of a fabric softener sheet lol. Also, thanks for the tip on the Luxe for headlight and tail light tint film. I found some on Amazon for about 34 dollars for a kit that is 20" X 1 yard. I just got through going through the process of sanding and polishing my headlights and was not sure if I wanted to use the Eastwood 2K clear coat or just tint them. The Luxe film really looks great. It actually stretches over the lens, and I can get it in light, which is what I wanted, or med and all the way to dark, but I don't want to block out the light from my headlights and tail lights. Thanks for the tip and that. I think I'm going to buy some Auto Zone film soon and practice tinting the door windows. I think I can do it now after watching you and listening to your tips. I know I joked around on live stream about needing 3 or 4 hundred feet lol but, I actually think I can do it. I'll probably use a 1 gallon herbicide sprayer from the box store to put the water and soap in; I'll go to Wal-Mart and get some baby shampoo, and I have a big jug of Dawn under the kitchen sink. I'll just make sure I clean the window real good following your practice I see you doing, and I'll just try and use my blow dryer to snap shrink the bottom of the tint. It may take a little more time with it, but I'll try and make it work. I'll remember to look for that draping of the tint when I'm snap shrinking. I can remember how yours looked all the times I've watched you do yours, so I'll try to keep that in mind while I'm doing it. Thanks for all the tips on Tinting and also for the tip on the Luxe tint for headlight tint film. That stuff looks really good. It's almost like wrapping a car the way it goes on. My headlights are pretty flat, so it shouldn't be a big deal. They are pretty big but flat, so I shouldn't have to worry about shrink for curves. Thanks for sharing the tinting videos. I hope your Plotter isn't still giving you problems with getting off track. probably see you on your next live stream, Matt. Thanks again!

Great how to video. I have an 2013 A6 and the rear side windows were really difficult compared to a Ford fusion I have. Could you show how you did the side windows on this A4?

I remember this on the stream

What type of tape do you use

Good shit!

This kind of tint quality very good... When make heater this one damage...

Tomorrow i have to do this audi crazy a4 same color 🤣 full window tint 35+85😂

Bro do tint lexus ls430 back mirror

why dry shrink over wet shrink ,,, ?

hi

very nice👌💯

This light pulls right out. Don’t be afraid. Just pull straight down the glass. Once it’s off sometimes the metal clips will pull kind of out of the light. Use a small tool to push them down and roll them back into the channel where the clip is.

I noticed what you are talking about when you dry shrink and use the felt card to brush it down. the fingers, as you call them, going up and down, when they are shrunk to fit, turn sideways and then you can brush them down with the felt card and not worry about kinking the film. Yep, I came back and watched it again because some guy that claims to have been doing it for 28 years commented on my comment. I'm still not sure what he was talking about but said some about the tint gods, blah blah blah, but anyhow, I thought I would ignore him and watch the video again, and I still don't see what he is talking about. Because I thought you done an awesome job, not only of cutting and shrinking it but also explaining it, and, in my opinion, you done the hardest part with great skill and that is maneuvering it inside and applying it to the back window. I'm 6'1" and around 260 or 270; I'm not sure since I haven't weighed in a couple of years and I've lost weight, so who knows, but I am a big guy, and just getting it in there would be a great feat for me hahaha. Anyway, I think this was skillfully executed and narrated as well! Thanks for posting it!

I feel like I have a harder time removing the actual red clip than the break light 😂 those clips suuuuuuck

白色的線是什麼線

I wish Lexen would shrink this easily 😭 Gonna get my hands on some Geo

It's a art. Gave it two trys to shrink on a hatch that wasn't even that curved. Between tint quality and the art involved, it just wasn't happening for me. I've had guys in the big city tint many of my cars back window. Different guys all the time and they are truly masters and quick.

Я этот стопак сломал напополам когда первый раз ее тонировал

Zombie loading 🧟‍♂️

How about you tint my TT-RS for free, and in exchange you can showcase it on your YT channel :)

Hello brother, I want Facebook, WhatsApp or Viber