How to Troubleshoot an Ulterra That Wont Deploy - No Audible Error Tone

Подписаться 7 тыс.

Просмотров 64 тыс.

50% 1

This video will show you the steps of how to inspect and troubleshoot a Minn Kota Ulterra that will not deploy or respond - no error tone is audible.
This video is shown on Minn Kota Ulterra models that were built after 2017 (Bluetooth-enabled).
Need to find an Authorized Minn Kota Service provider? Please visit - bit.ly/34Zjq3f
Subscribe for more Minn Kota How-to videos! bit.ly/35DiLAX
www.minnkotamotors.com

Хобби

Опубликовано:

16 фев 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 18

@AFaO Год назад

My cam sensor was stuck. There was corrosion on the metal sleeve/bushing and that was binding the cam lever. It almost looks like the chrome finish was peeling off and that was jamming up the lever in the deploy position. I temporarily sanded it smooth and greased it until the replacement part comes in (ordered). But I sure hope minn kota updates this sleeve to a stainless or other material...since the coating that is on it will interact with salt and appears to flake off...as that is what appears to have happened to mine.

@bakervinci163 Год назад

Regardless of warranty, what are the three top interval issues that cab occur? Sending my unit off is not an option

@johnjfaulk8560 Год назад

Why doesn’t minkota sell replacement worm gear & shafts

@timtullio1210 Год назад

It's 2022 now, have you (Minn Kota) fixed the deployment problem on all units being sold now? Yes/No?

@jhide333 Год назад

Mines 2021 and ive had for a year now. Not 1 problem until last week.

@eugenemccarl145 Год назад

All I know is I'm pissed that I spent thousands of dollars for a piece of crap I can't depend on and it cost a fortune every time I take it in for repair with hardly any use never again.

@Lefishn Год назад

Mine lately even after a reset goes straight up and jams under the main unit. Scary cause sounds like it's trying to keep going. Doing hardware reset doesn't help but as long as I don't stow everything works. Even changed trim motor and new belt but started doing same thing week later. No idea what to do

@MinnKotaTutorials Год назад

Hi Nick, Thank you for contacting Minn Kota. Please use the following link to submit your inquiry to our Technical Service Team: bit.ly/3OAKAyw Thank you.

@dameinclements2078 Год назад

Did this issue get resolved?

@bakervinci163 Год назад

I have brand new unit. The red light it staying on. Even when it deploys and stows.

@MinnKotaTutorials Год назад

Hi Baker, Thank you for contacting Minn Kota. Please use the following link to submit your inquiry to our Technical Service Team: bit.ly/3NsSeMC Thank you.

@mulvey0731 2 года назад

My stow sensor seems to be malfunctioning. When I stow, it stops on the rest and has a red status light that won’t go off. If I take the motor rest off that has the actuator button, the red light goes off, and it allows me to deploy (and stow, but I have to manually depress the button to stop it). Any suggestions on what I need to do or replace? It seems like the red light should light when the actuator stops the stow procedure, but then go of so the motor is ready to deploy. Is there a way to reset it?

@jamesskoruppa8317 5 месяцев назад

Did you ever figure this out? Mine is doing the same thing.

@mulvey0731 5 месяцев назад

@@jamesskoruppa8317 yes. Make sure you power it on. (I’m so embarrassed)😞

@jamesskoruppa8317 5 месяцев назад

@@mulvey0731 Thanks for the response. Mine was just as bad. I wasn't double clicking on the remote fast enough to deploy.

@mulvey0731 5 месяцев назад

@@jamesskoruppa8317 EXACTLY!!! That’s what it was. I’d forgotten, but I knew it was too easy. I think they need to embolden this in the trouble shooting somewhere. It’s very obvious, yes, but for those of us who”over 45’s”, we’re used to “click on, click off”. Double clicking, isn’t intuitive to us, and if it’s been more than 6 weeks since you used it, that just is t something we’re going to remember right off. Thats going to lead to a lot of wasted time troubleshooting something like I’m sure both of us did. Like I said, it was something embarrassingly simple, and yet…..not!