How To Understand & Fix the Splutch in Whirlpool Washers: A Detailed Guide

Harper & Knowles Washer and Dryer Repair

Подписаться 11 тыс.

Просмотров 22 тыс.

50% 1

In this video I disassemble the Whirlpool washing machine splutch and explain how each component functions. This device can be found on all modern Whirlpool brand washing machines. These brands include, Maytag, Amana, Conservator, Kenmore and many others. If you enjoy videos where different components of household appliances are explained then you have found the right channel. If your washer has short sporadic motor noises when it is in the wash cycle your splutch is probably not shifting correctly and your agitator and spin drum are both engaged at the same time and the splutch should be changed or lubricated.
Welcome to the education channel for washing machine and dryer technicians and DIY’ers wanting to solve common and not-so-common problems you may encounter in your business or laundry room. Learn tips and tricks and how to make specialty tools and devices needed to make your job easier. We also cover how we structure and run our thriving small business.
Watch Our Other Videos:
Dryer Starts And Stops After Running A Few Minutes: • How To Fix a Maytag Dr...
Roaches In Washing Machine Electronics | A Nasty Job: • How To Repair a Washin...
Washing Machine Motor Won't Spin: • How To Fix & Flip a Ma...
▶️ SUBSCRIBE for more washer and dryer repair videos:
ru-vid.com/show-UCeEo...
As an Amazon Associate I earn from qualifying purchases.
Buy me a coffee:
www.paypal.com/donate/?hosted...
Send me something:
Harper & Knowles
2945 Highway 1153
Oakdale, LA 71463
My Gear
My Vlog Camera: amzn.to/43vbRv3
My Backup Camera:amzn.to/3UGIz8H
My Studio Camera: amzn.to/417DV5Y
My Wireless Camera Controller: amzn.to/3L4MhWg
My Preferred Memory Card For Cameras: amzn.to/41xIHtc
My Portable Charger: amzn.to/41dtTAc
My Studio Microphone: amzn.to/41fcrLO
My Lavalier Microphone: amzn.to/3UC8Tkn
My Studio Teleprompter: amzn.to/3KJikts
My iPhone Gimbal: amzn.to/3GMLd76
My iPhone Chest Mount: amzn.to/3zZUZ1I
My Main Studio Light: amzn.to/3mvBV8N
My Secondary Studio Light: amzn.to/3GM2v45
My External Hard Drive: amzn.to/3GMLDKI
My Publications
My pen name is Cal Kasheau. Hey, I'd like to shamelessly promote my literary accomplishments while I have your attention. I have several short story titles you can get on Amazon; the links are below. Some are humorous, some reflect events in my life, and some are legends I heard of as a child in the swamps of Louisiana. They are only a dollar or two, and most are free with Kindle unlimited membership. I hope you will take the time to read one or two and give me your honest opinion in the comments on whether or not I should continue to pursue a side gig as an author.
The Legend of the Loup Garou: A Louisiana Horror Story
amzn.to/3EJE4o2
The Legend of the Parlangua: A Louisiana Swamp Tale
amzn.to/3VtF3ys
The Fuzz vs, The Buzz: A Backwoods Beekeeper Meets a Traffic Cop
amzn.to/3EEvwP7
The Story of Buster the Cat: How I survived the Ride From Hell
amzn.to/3T5BM6L
Tell a Story ,Teach a Lesson
amzn.to/3CUd2I3
The Dreaded BMI Index: How it Was that I Went on a Diet
amzn.to/3T5W53Y
My Misadventures as a Moonshiner
amzn.to/3CAmBLT
The Magic Blanket
amzn.to/3yGE8AS
All the Girls I've Loved: A series of stories about a young man's life and the women he loved
amzn.to/3esvIXb
Thanks for watching!
#splutch #washerrepair #washingmachinerepair

Хобби

Опубликовано:

30 окт 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 121

@WestW3st 9 месяцев назад

Thanks for all the time and effort you put into these videos! The very last line of this one clued me in haha "if the spin basket and agitator both try to move at the same time" ding ding! I had been trying to figure out without knowing beforehand exactly how each piece was supposed to be operating. Without that information it's pretty hard to figure out if it's operating incorrectly! The level of detail in your videos is something you can't find in a service manual. Only from experience - so thanks for sharing yours so that we can benefit from it!

@HarperandKnowles 9 месяцев назад

Thank you so much for your kind words! I'm thrilled to hear that the videos have been helpful to you, especially that specific insight about the spin basket and agitator. It's my goal to share the knowledge I've gained over the years to make things a bit easier for others. Your feedback truly means a lot and motivates me to continue creating and sharing. If you ever have questions or topics you'd like to see covered, please don't hesitate to let me know. Thanks again for your support and thanks for watching too!

@johnhillman531 Год назад

Great description of the splutch and its function. Your comment on how the splutch should move freely saved me from calling a repair man. I have a Whirlpool Cabrio washer and was having issues with it spinning. I replaced the actuator, and the splutch but the washer still would not work. Next I replaced the solenoid, but it still would not run. After watching your video and better understanding the splutch function I realized the new splutch was defective. The slide on the splutch would not move freely and the actuator could not change the position. After pulling the new splutch off and putting the old splutch back on the washer was back in operation.

@HarperandKnowles Год назад

It’s kind of disappointing when your new part is worse than the old one. I’ve had the same experience with new splutches. Thanks for watching!

@KyleParks 3 месяца назад

Thank you for taking the time to make such a detailed video. Very helpful.

@HarperandKnowles 3 месяца назад

You are very welcome! Thanks for watching!

@MarioDallaRiva 7 месяцев назад

Fantastic detailed explanation, thanks! Bravo! 👏🏻

@HarperandKnowles 7 месяцев назад

You are very welcome. Thanks for watching!

@Christian-cp9hb Год назад

Very excellent instructions, thank you.

@HarperandKnowles Год назад

My pleasure! Thank you for watching.

@garybarr9857 11 месяцев назад

Outstanding video. Explained functionality extremely well.

@HarperandKnowles 11 месяцев назад

I’m glad you liked it. Thanks for watching!

@ElkEars 10 месяцев назад

Thank you!! Just what I needed.

@HarperandKnowles 10 месяцев назад

Glad it helped, thanks for watching!

@12DGJB21 6 месяцев назад

So very helpful. Thank you!

@HarperandKnowles 6 месяцев назад

You are very welcome. Thanks for watching!

@PedroNZ1965 5 месяцев назад

Thanks for your help, from New Zealand

@HarperandKnowles 5 месяцев назад

Happy to help! Thanks for watching!

@salvatoregambino3398 2 месяца назад

Splines and clutch = splutch 😊

@HarperandKnowles 2 месяца назад

Best answer yet! Thanks for watching!

@81monkeybone 2 месяца назад

Very informative, thank you! I actually need to fix mine as well.

@HarperandKnowles 2 месяца назад

I’m glad you found my video useful. Thanks for watching!

@steve4729 4 месяца назад

This is great. If it’s not the shifter switch, I think it might be the splutch.

@HarperandKnowles 4 месяца назад

I hope you get it fixed. Thanks for watching!

@steve4729 4 месяца назад

@@HarperandKnowles yessir! Took me only 7min! Thank you!

@sierushop 7 месяцев назад

Thank you very much for the video! On 3:24, I think it's actually a led light that is used to determine the rpms.

@HarperandKnowles 7 месяцев назад

Thank you for that information, I think you may be correct. Thanks for watching!

@joseluisameal9103 9 месяцев назад

excellent explanation

@HarperandKnowles 9 месяцев назад

Thanks for watching!

@jamie66233 3 месяца назад

Great video!!

@HarperandKnowles 3 месяца назад

Thank you and thanks for the watching too!

@jamie66233 3 месяца назад

@HarperandKnowles mind if I ask you a question? I'm trying to figure out if my washer machine is working properly or not. I feel like when the "agitator" spins it move as a snails pace and "stop and goes" VERY slowly. This normal on an older 80 series?

@HarperandKnowles 3 месяца назад

Here’s the video that might fix your problem. How To Replace the Clutch in Your Whirlpool-Style Washing Machine: A Step-by-Step Guide ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bPPoeaQQOU4.html. Thanks for watching!

@williambarry6438 5 дней назад

Thank you for the informative video brother. I've got parts that will be here in a couple days. Both drive hub and the splutch kit. Pulley nut came off no problem but the pulley won't budge off the bolt. The splutch ring also detached no prob but the pulley won't budge. Splutch is melted where attached to washer, not pulley, so I'm thinking heat must have bound the pulley to the splutch like lock tight.

@HarperandKnowles 4 дня назад

You can use a set of pullers for this. Thanks for watching!

@williambarry6438 4 дня назад

Tried that but to no avail. Gonna try some heat on it next

@williambarry6438 3 дня назад

@@HarperandKnowles I applied some heat and pried off the pulley. There is a 3 pronged metal peice of the pulley that is still stuck to the shaft that is not budging. Idk what type of bonding agent they used when installing the old pulley so guess the whole shift will need to be replaced.

@HarperandKnowles 3 дня назад

Or you could use a die grinder with a cutting wheel and cut it off the shaft.

@obsoleteprofessor2034 Год назад

There are several videos, mostly in Spanish where people in "3rd world" countries have more time than money. For them, a bearing replacement is worth it. I don't remember if this video shows it, but one of the repair people had bearings in OE Whirlpool packaging. I googled the numbers and kept getting supply houses in Mexico. An closeup of the actual bearing revealed that it is a common 206, avail at any parts house. One of the YT parts store videos gave the p/n for the tub to transmission seal. Usually, the parts breakdown shows the seal included with the new transmission and not avail separately. The metal sleeve he had trouble with may be the same as the Cabrio bearing kit (?), the machine with the big pancake motor windings at the bottom of the tub. I don't know if there are any more seals used on the transmission. Most of these will leak, kill the bearings to where they sound like an airplane, on spin and later, leaking water will corrode the shifter. If I don't have a leaker, seems like I have good luck flipping these machines over, taking the splunge apart, lightly greasing it and swapping in a good shifter. 90% of the time, after recalibration, the problems are gone. I am running out of old school machines and these new models are starting to pile up. I am still hoping the transmissions will take a big drop in price once the warehouses realize they need to get their money and get out of this model. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nZ_GsvkpSQQ.html 2nd vid ru-vid.comj_jNGvG5QZk?feature=share

@HarperandKnowles Год назад

This is good stuff Professor. Like you said, these folks have more time to do this than we have.There was an outfit in the US that was rebuilding these and selling them as reconditioned parts. I bought a GE transmission from them once. Their price was under a new part but still too high for me to make much profit. If they're going to make these parts unserviceable they should at least make them affordable. Thanks for this great information and the video link too.

@ausseamore8386 Год назад

Thanks

@HarperandKnowles Год назад

Thank you for watching! I love binge watchers!

@OmarTravelAdventures 2 месяца назад

Mr. Harper, thank a million for the great video. Question: When this machine spins it also is spinning the agitator, correct?

@HarperandKnowles 2 месяца назад

For the record, Mr. Harper passed away last August. Now it’s just me, Chip! It is common for the agitator to spin along with the basket but it isn’t being driven.

@OmarTravelAdventures 2 месяца назад

@@HarperandKnowles My condolences! Thank you so much for the super fast reply!!!

@khaleemkhan1222 2 месяца назад

U is a boss 👌👌

@HarperandKnowles 2 месяца назад

Thank you!

@stevepope5484 Год назад

I have sense light/ stopped full of soapy water. Took off my pump/hot wired it.flooded the tiny floor space/ 8 towels worth/ checked my cap also good.tried to remove the high tec.lid sw.Yep I busted it. Now finally I'm thinking its that actuator? Gotta find the video where they test it. Can't bring up diagnose with any of the lights on? Great video!Thanks

@HarperandKnowles Год назад

A lot of times if it’s stuck in a cycle you can hold down the start switch for about 20 seconds and it will cancel and pump out. Too late for that now. Here’s the link to the video to test actuator: Washer not Agitating or Spinning | Diagnose The Shift Actuator ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7FBRdwwWr6o.html Good luck!

@stevepope5484 Год назад

Wow! Thank You very much!

@stevepope5484 Год назад

My lid switch arrived today. It's installed/the capacitor is back on/the pump also. I kept the lid open until the last. Closed the lid/plugged it up. Waters on. Now I've got a locked lid with a flashing red locked lid. This is almost as fun as operating a late model car stereo.

@HarperandKnowles Год назад

You're not having much luck with that thing, are you? Try holding the start button down and see if the lid lock will open. or try unplugging and after a minute or so plug it back in and give it a minute or so. if that doesn't work see if you can get it into diagnostic mode and try cycling the lid lock from there.

@matthewnagel9034 4 месяца назад

Great Video Sir! Any chance you would know why i am able to completely remove the shaft from the top of this exact same washer while the agitator is still connected? There is nothing retaining the shaft and nobody seems to have an answer as to a fix. I can grab the agitator plate from the top and the agitator, and shaft will completely pull up with ease. Is there a clip, pin, or bolt that is supposed to lock that shaft in place? Thanks in advance. I was hoping this video was going to show me how the shaft secured from thr bottom!

@HarperandKnowles 4 месяца назад

There probably is a C-clip or something inside The gear case that holds the shaft in place but it must have come off. Unfortunately, this is contained within the gearbox and not accessible to service personnel. I have never seen this before. You, Sir, have a unique malfunction. Thanks for watching!

@Gypsypeaches007 6 месяцев назад

Thank yku for your videos! We have an Amana that stopped agitating or spinning, we have replaced the accuator and the lod switch and it srill isnt working, so do you think we need to try replacing the spultch? The lid lock light keeps getting stuck on after it tried to run a wash cycle and stops when it shoukd be agitating abd the final spin light starts flashing and the lid lock light stays steady on.

@HarperandKnowles 6 месяцев назад

Watch this video, Complete Guide to Fixing Your Amana Washing Machine: Works for All Whirlpool Corp. Brands ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-M6EQUP4iTHM.html. You should use your service booklet to retrieve the error codes that are stored in the machine and that will give you a clue as to what is happening. Thanks for watching.

@ashleyrice7168 Месяц назад

I have an Amana washer that makes an awful grinding noise and won’t spin. The water will drain at the end of the cycle. Per my googling, I think it may be the actuator. Do you think that is what the problem is?

@HarperandKnowles Месяц назад

Try doing the steps in this video and see if you can figure out which component has failed. How To Diagnose Your Amana Washing Machine: Chip's Guide to Manual Diagnostic Mode ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-M6EQUP4iTHM.html

@blackbeardiron 23 дня назад

Burnt the top lip of the main part that engages the pulley wheel twice. Any ideas. Thanks

@HarperandKnowles 23 дня назад

Change it. Thanks for watching!

@sandywjo5 Год назад

My Maytag clicks extremely loud multiple times in between a cycle, like you can hear it on the other side of the house. I have always wondered if it was the splutch, called repair service and they had no idea so they threw a new pump in. Did not fix issue. Out of warranty. Wondering cost to replace splutch with labor time is worth it on 5 year old washer?

@HarperandKnowles Год назад

It sounds like you're on the right track suspecting the splutch. Before considering a replacement, you can check the splutch for free movement. If it doesn't shift smoothly, then it's likely worth changing both the splutch and possibly the shift actuator. The cost-effectiveness of the repair will depend on whether you plan to do the work yourself or hire a service technician and their charges for the job. Good luck with your decision, and thanks for watching my channel!

@TruthSeeker1088 Год назад

Piece just came today, will try to replace

@HarperandKnowles Год назад

Good luck with the repair and thanks for watching!

@stevepope5484 Год назад

I read a couple. If I step up. It'll be to an old washer I saved/it had a bad coupling.

@HarperandKnowles Год назад

@user-mn2wn9yi3s 6 месяцев назад

I have changed both the ahift actuator and the splutch and the agitator step is still not working properly. It still fails when I try to run a load. It works sometimes during the diagnostic phase but not every time. Is there anything I am missing? I didn’t see it in the comments so apologies if it’s been answered already.

@HarperandKnowles 6 месяцев назад

Of course I can’t determine what’s wrong with your machine remotely but I would check the capacitor and the agitator splines. If you take the flapper off the lid and slip it into the cabinet slot you can observe what’s happening better. You could also have a motor that is turning in only one direction. That would cause your clothes to tangle around the agitator. Thanks for watching!

@user-mh3ob1iy9t 11 месяцев назад

I've replaced the gear case, actuator and splutch. Can anyone say why when it's in agitation cycle, why it still makes grinding noise? In one direction, no noise but when goes in opposite direction, I watched the pulley being pulled back towards the splutch which makes it grind. I'm confused.

@HarperandKnowles 11 месяцев назад

Watch this video and see if that’s the problem you’re having. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rXDETg8vaRY.htmlsi=qMIsAabbDhRQlBWe. Thanks for watching!

@MrKickerZz Год назад

So my series 500 washer was making a loud clank clank clank when it was at the end of the spin cycle and ive found videos of the exact same sound. Replaced the Splutch and actuator however I still have the same sound..... I dont even see based on the design how they wouldnt make the clank sound when that shift actuator changes position. What else could be the issue?!

@HarperandKnowles Год назад

Share a link of one of those videos and I'll see what I can make of it.

@MrKickerZz Год назад

@@HarperandKnowles ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-C267PxOO6i8.html

@HarperandKnowles Год назад

I have seen this many times before. What is happening is the motor goes into reverse for a short period of time at the end of the spin cycle and that is what is making the whine sound almost like a braking effect. The stress on the splutch from this torque is causing the splutch gears to jump. This isn't a mechanical problem but a control board problem. This is an area that I'm not an expert in but I used to think that the manufacturer designed the machine to reverse the motor for a braking action after the spin cycle, and they may have, I don't know. I have the luxury of having used control boards from scrapped machines so I experimented and found when I swapped out the board, that fixes the problem. I wish I knew more about this problem perhaps someone with more knowledge than I will see this and educate all of us.

@orozco53204 10 месяцев назад

Can aftermarket shift actuator be a problem even when new,i changed mine and still not working

@HarperandKnowles 10 месяцев назад

I wouldn’t rule it out but it’s rare. Thanks for watching!

@mikerayle6103 4 месяца назад

I think this is what's wrong with mine I'll start a cycle and when it goes to agitate the motor hums but no movement. If I open the lid and close it. It starts working until the next agitate cycle. I believe the spin works but my clothes aren't coming out that clean unless I babysit it and open the lid when I start hearing the motor but no agitation. I don't know if the splutch is sticking or the actuator/shifter is weak.

@HarperandKnowles 4 месяца назад

You may have a bad capacitor if the motor hums during the start cycle. My best guess without being able to check it myself. Thanks for watching!

@mikerayle6103 4 месяца назад

@@HarperandKnowles The machine works if I open the lid then close it. When I say hums I mean it's spinning but not engaging with the agitator. I think the splutch ? Is sticking

@HarperandKnowles 4 месяца назад

By works you mean it squirts water. Check your belt.

@CourtneyLavender-iz8tu Месяц назад

My washer was not agitating we replaced the shift actuator worked for one load started doing the same thing. Checked the shift actuator and the arm keeps coming out of the splutch.

@HarperandKnowles Месяц назад

If the shift actuator arm doesn't have much flex in it I'd change the splutch. Thanks for watching!

@gartheligon140 9 месяцев назад

Hi sir, the plastic arm that sticks out from the shift actuator is broken and I have to replace the actuator, there's excess play or backlash between the splines of the splutch and the plastic splines that comes out of the gearbox. Apart from the splutch assembly do you know if the plastic splined part coming out from the gearbox is an individual part or it's the complete gearbox?

@HarperandKnowles 9 месяцев назад

That is part of the gearbox assembly. I have never seen one worn too bad. There is a first for everything though. Thanks for watching!

@gartheligon140 9 месяцев назад

@@HarperandKnowles Thank you.

@HarperandKnowles 9 месяцев назад

My Pleasure

@lrich8181 4 месяца назад

Sprocket clutch combo. Splutch

@HarperandKnowles 4 месяца назад

Sounds reasonable. Thanks for watching!

@jeromedavis8575 Год назад

Nice demo. What oil is used? What are the belts made of?

@HarperandKnowles Год назад

The oil in the gearbox is heavy gear oil, probably 85-90 weight, and isn't serviceable. For lubing the splutch...? It is made of hard plastic that doesn't come with any apparent grease or oil on the parts. If the splutch is sticking I have used a dry Teflon-based lubricant made by WD40 to free it up. The belt is made from strong fibers impregnated in synthetic rubber. I'm not sure what the fibers are, perhaps kevlar? Thanks for watching.

@jeromedavis8575 Год назад

@@HarperandKnowles Are they the same or different on the maytag models including their commercial models?

@HarperandKnowles Год назад

@@jeromedavis8575 Ben’s Appliances and Junk made a video on this subject recently. I think he found that the parts used on their commercial machines were actually of better quality. Check his videos out and see if you can find it. I think it was published no longer than two months ago.

@jeromedavis8575 Год назад

@@HarperandKnowles I think I saw that. What do their motors look like?

@HarperandKnowles Год назад

They look the same. I don't have much experience repairing them though. Not many people in my area buy commercial quality appliances.

@brianbanks3044 10 месяцев назад

it is more than just red and black (as I found out the hard way)....I have the commercial Maytag and used a regular actuator and it blew my circuit board...USE the correct actuator and save yourself 175 bucks

@HarperandKnowles 10 месяцев назад

Hmmm, I don’t see how you could use the wrong actuator. They have totally different plug interfaces. You had to do some creative re-wiring to achieve that task! Thanks for watching!

@pl747 Год назад

Transmissions are very weak. Won't last. And the shift actuator switch is the other main problem. No telling how many of those I have replaced. But what choice do you have unless you want to bite the bullet and step up to a Speed Queen.

@HarperandKnowles Год назад

If Whirlpool just went back to their direct drive machines and used porcelain tops that we're bleach proof they would corner the market. But, alas, if you build a machine that last then you sell fewer units. Did anyone notice that they only started making these junk machines after they acquired most of their US competitors?

@jeromedavis8575 Год назад

Why did maytag claim it was commercial technology when they're the same machine?

@HarperandKnowles Год назад

@@jeromedavis8575 marketing perhaps.

@williambarry6438 5 дней назад

They will probably get fined if it lasts too long. Most retail machines have to fail within a time limit or face fines. I'm sitting here with a pulley that must be heat welded together. Guess I'll have to break it off. Splutch kit and drive hub will be here in a couple days so not worried about damaging the pulley or splutch. Thank you for continuing to reply to all those whom this video has helped and you have my condolences for your loss brother.

@DudeInOhio85 5 месяцев назад

Splutch, spline + clutch

@HarperandKnowles 5 месяцев назад

That's as good a guess as any. I think you are correct. Thanks for watching!

@saturationstation1446 8 месяцев назад

the bob ross of appliance repair dudes

@HarperandKnowles 8 месяцев назад

Lol! Let’s put a happy little Maytag right over here. Thanks for watching!

@greggummere7449 Год назад

splines + clutch = splutch

@HarperandKnowles Год назад

I knew it was something like that! Thanks for clearing that up. Thanks for watching too!

@ausseamore8386 9 месяцев назад

@HarperandKnowles 9 месяцев назад

Thanks for watching!

@gregphilley5365 4 месяца назад

Splutch.......Splined Clutch.... is what I think it is🤔 ALSO you can start calling people a "Splutch" and they would have no idea what it is.....Imma use that one !!!...😅🤣😂😂

@HarperandKnowles 4 месяца назад

Lol Thanks for watching!

@KushDragon420 Год назад

I scrap these all the time. Amana. People always blow the transmission and bearing on these. And i dont replace bearing either so maybe 1 in 10 i get at the shop ends up on the floor. Its too bad they make these so flimsy now and keep slapping that super capcity on there so people overlaod and kill them in 2-5 years max

@HarperandKnowles Год назад

Yeah! You nailed it. Flimsy is too kind.

@tonywestvirginia Год назад

I have been repairing washers and dryers off and on since I was a kid in the 70's. I will take an old "wig-wag" over most of these newer models!!!

@HarperandKnowles Год назад

Mr. Harper has told me about those and he has a bunch of parts for them too. I have never had to work on one. I think they are considered machines of antiquity now. I wonder if any are still out there in my community??

@KushDragon420 Год назад

@@HarperandKnowles ive never seen one either. The oldest washer i have and have worked on is a maytag manufactured april of 1966. Still runs.

@HarperandKnowles Год назад

I thought I was an old geezer but I think Tony has me beat!!