How To Upgrade Reface Kitchen Cabinets For Cheap

Подписаться 158 тыс.

Просмотров 120 тыс.

50% 1

In today's video we are taking a look at How to upgrade your kitchen cabinets for under $100 dollars. With this method is super easy anyone can do it.
Things you will need:
Drill amzn.to/2JxKF5I
Sand paper amzn.to/2qk985V
Sander amzn.to/2Hbp3xz
Screwdriver amzn.to/2GNePQx
Paint amzn.to/2qmvRya
Finishing nails amzn.to/2qkn4wA
jigsaw amzn.to/2qmWZx1
circular saw amzn.to/2v1Rpph
miter saw amzn.to/2IH2jms
hand saw amzn.to/2IG9P0H
wood glue amzn.to/2qk9For
kitchen knobs amzn.to/2ql7pND
hinges amzn.to/2GR21wA
wood amzn.to/2v81BMS
hammer amzn.to/2GLZuEe
nail finisher amzn.to/2v1bjRv
wood putty amzn.to/2v10Sxc
measuring tape amzn.to/2JAcxq7
Any Question Dont Hesitate To Ask!
Support our Work on patreon! Thank You!
/ statupbox
My Gear
canon t5 1200d amzn.to/2mgQe0c
Canon EF 50mm f/1.8 STM Lens amzn.to/2oyFESD
Blue Snowball iCE Condenser amzn.to/2p5sg8Q
AmazonBasics 67 VideoTripod amzn.to/2oXosHa
Sennheiser HD280PRO Headphones amzn.to/2p5n1WS
My Complete Gear List (always Updated)
amzn.to/2Futv73
StatUpBox
PO BOX 48450
Cumberland, NC 28331
Check out my web page statupbox.blogs...
please subscribe to my channel / statupboxchannel
Twitter / statupbox
Facebook / statupbox
check out my google + page www.google.com...
instagram / statupbox
As an Amazon Associate I earn from qualifying purchases
This Video is created for educational and entertainment purposes only. This video is only created to entertain for its comedic value .You should always contact a license professional when installing, repairing, creating, replacing, making a recipe, cooking, working in any project or replicating anything done on the video. This video is not intended to replace a professional advice, diagnosis or treatment. we hereby disclaim any and all liability to any party for any direct, indirect, implied, punitive, special, incidental or other consequential damages arising directly or indirectly from any use of the Video Content, which is provided as is, and without warranties. Any reliance you place on such information on this content is therefore strictly at your own risk. This video should only be taken as comedic entertainment.

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 107

@beachpal 8 месяцев назад

I've watch a dozen videos but yours is simple enough to make me want to do this.

@roxanneeverett 2 года назад

The " before" picture looks exactly like my cabinets now. We redid them a few years ago by painting them that same exact brown over the old golden cabinet. Now there are areas just like yours that are starting to show through. Thanks for the new ideas!

@daniellecampbell5479 4 года назад

You’re great at explaining! Thanks so much!

@DiannaAtherton 3 года назад

You did a really nice job. All these critics. It looks good.

@KrisH-ri6eo 4 года назад

Unfortunately a lot of cabinets have bevel or rounded edges. I suggest if you are making shaker doors to bring wood in a little more to match right before it curves down. That’s what we had to do and ours are looking good. Good luck DIY’ers!

@StatUpBox 4 года назад

Great tip!

@gail9566 3 года назад

So you didn't trim the original door to be even? Just sized up the molding?

@COULDbWORSE1 3 года назад

That's what mine have. Beveled edges. I was thinking of trimming them down but that may leave gaps when doors are closed. So it looks ok using your idea?

@kkw2219 3 года назад

what about filling the gap between moulding and the beveled edges? I am really debating between this way and the way you mentioned.

@KrisH-ri6eo 3 года назад

@@kkw2219 too much work honestly. The way we did looks really good and less hassle.

@LoveOfArt87 3 года назад

Ok I’ve watched a lot of these video and your by far is the best! I didn’t even know you could buying those little nails to use with a hammer. I thought u had to buy a staple gun! Thank you!

@armymom7857 4 года назад

I personally like the look of shaker cabinets. ❤️ thank you for your video.

@StatUpBox 4 года назад

Thanks for watching!

@rosaazul88 5 лет назад

Awesome thank you I plan on doing this to my grandma's cabinets

@StatUpBox 5 лет назад

Nice! keep us updated!

@barbkeen1221 4 года назад

That's a very nice thing that you're doing for your grandma! Obviously you were raised right! So how did it go? Does grandma love it?

@voodooranger88 3 года назад

You made this so easy to follow! Thanks for the tips!

@ONLYGOODleftistisaDEADleftist 4 года назад

Additional Notes: 1. A thin coat of construction adhesive should be applied to the underside of the shaker slats prior to nailing them to the cabinet doors. 2. NEVER use a screwdriver as a nail set (punch.) This tool abuse will eventually render the screwdriver unusable. Use a proper punch. 3. When applying putty over the nails, also apply putty along the inside of the shaker slats where they meet the original cabinet door surface and along the edges of the cabinet doors to preclude cracks that will be visible after the paint is applied.. 4. Prior to painting, when sanding the cabinet doors, also sand the edges of the doors, as well as the front surfaces, so that the added shaker slats are flush with the original cabinet door front surfaces and so that cracks are not visible after painting. 5. When attaching the cabinet door knobs/handles, use a screwdriver to tighten the screws from the inside of the door, holding the knob/handle firmly in place on the front side of the door, instead of turning the knob/handle.

@marikiemarie7622 2 года назад

Um he did use glue. The screw drivers is cheap and works great fir this. He did everything you mentioned... other than the new hardware...your step isn't necessary. Lol good grief. Pompous ass

@jgjerze1234 2 года назад

This is really well-done video! You u explained everything perfectly! One of the most helpful for a novice such as me. Thank you!

@StatUpBox 2 года назад

I'm so glad!👍😊❤💪

@vivisalvivi 3 года назад

This is exactly what Ive been looking for to update my kitchen cabinets, thank you!

@StatUpBox 3 года назад

Glad it was helpful!😁👍

@claudiagabrielasalas1511 4 года назад

Really enjoyed your video! You did a great job, and u explain everything so well! Can’t wait to try in our kitchen!

@anabarajas7873 3 года назад

Very nice, I don't have a problem painting and sanding, but the cutting and measurements awww 🥺

@kristyhardie890 5 лет назад

Maybe next time paint the original doors centre part then add the sides and paint so the middle section is smooth/streak free. Great job though 😊

@StatUpBox 5 лет назад

Good tip! but for the wood glue the less paint the better.

@davidbooher5559 4 года назад

The other problem was that the center part was significantly darker than the trim. It needs at least two coats of white paint

@intellectualsmoke 4 года назад

. But that looked good

@captaincrunchy2359 2 года назад

Thanks for this tip!

@MieshaMarie 3 года назад

This is awesome. Simple and cheap like i like too

@jackcolt6875 2 месяца назад

Nice video. The sides of those doors look beveled….how did you address this? Can’t you see a gap from the sides?

@JuanF-k5f 2 месяца назад

This is I want to know

@nellieguerreiro7458 2 года назад

Amazing!!! Thanks for the great video!! Question did you use melamine paint for the cabinets? TIA

@StatUpBox 2 года назад

thank you, enamel. ❤👍😊

@lindachmelecki1480 3 года назад

So respond back please u made this look great, just need a few new pointers about the inside of cabinets after outside looks so nice

@marcolaquatra2997 3 года назад

What did you do about the rounded edge? I seen you overhung the poplar strips but how did your rid of the gap?

@Bloody_RedQueen 3 года назад

Wood filler and a metal scraper or better yet, a metal carpenter's square. They're made at a perfect right angle, so you can run it over the edges after filling the bevel.

@marikiemarie7622 2 года назад

Don't have to get rid of anything. You won't see it.

@jend4128 4 года назад

That looks great! Good job!

@jennielin508 4 года назад

This was awesome!! Very clear instructions, thank you!

@WhyNot-zr5kl 5 лет назад

Wow that looks awesome. Your inspiring me, thanks.

@StatUpBox 5 лет назад

Thanks!! Great to hear that!😁

@CrimeDoesNotPay 2 года назад

I love this idea! What size nails did you use?

@justatitle Год назад

I’m just now seeing this video. It’s been 5 years. How’s it holding up? In retrospect, what if anything would you have done differently. In as far as product, not method. The method seems pretty clear cut. But products vary. Thank you.

@StatUpBox Год назад

Still holding strong. Full of cans and detergent bottles.

@lindachmelecki1480 3 года назад

What do u do to the inside of the cabinet to make it look nice and like new

@armymom7857 4 года назад

I was wondering if it’s possible to put the soft close hinges on these types of cabinet or am I stuck with the hinges you can see? Thank you for your help.

@StatUpBox 4 года назад

they have spring loaded ones , where you don't have to make a hole on the door. good luck.

@talos910 3 года назад

What did you use for the cracks on the sides? What product

@leyashnoscar7627 5 лет назад

Thank you so much! I plan on doing this!

@StatUpBox 5 лет назад

Nice!

@williamprezioso2742 6 месяцев назад

Where do you get the correct wood

@ravensilverwing495 3 года назад

I noticed that the original doors were slightly beveled on the edges, leaving a small space underneath the edge of the wood slats that you placed on top for the frame...question.. did you fill in the space with filler or just paint over it all and leave it?

@StatUpBox 3 года назад

We left as is and painted over it. Gave it a nice side design that we liked. But you can fill it with wood putty, filler or caulk. good luck.

@wymandyer6261 Месяц назад

excellent, thank you

@StatUpBox Месяц назад

You are welcome!

@canadianbacon79 5 лет назад

Better to make them a bit longer all around thecabinet, then router it smooth to the door

@gail9566 3 года назад

My cabinets are slightly rounded edged plywood. How do I prep them?

@kalia46 4 года назад

What size nails did you use?

@mzdomini238 2 года назад

So you didn’t strip the paint that was peeling?

@andy10515 4 года назад

Did I miss it I don't recall you saying what was the thickness of the wood I only hear you say 4ftx2and 1/2. Can you let me know I am doing this to my cabinets they are very old.

@yolandajane1280 2 года назад

Super

@duncans5295 5 лет назад

Just what I was looking for.., 👍

@StatUpBox 5 лет назад

Great! Good luck!

@veronicallamas9333 4 года назад

Did I miss the part where he addresses the the thickness of the cabinet? How does the edge all around the cabinet look?

@suzmquz 4 года назад

The cabinets I'm doing have rounded corners. After applying the edging, I plan in to fill in the groove with wood putty so that it's flush. hope that helps

@CTRwannaB 4 года назад

That’s a lot of wood filler to use. Wouldn’t it, over multiple uses and slams, crack and fall off?

@HowtoFaithALife 4 года назад

CTRwannaB that’s what I was wondering! But what could we use instead?

@talos910 3 года назад

I’m doing the same right now what y’all come up with

@veronicallamas9333 3 года назад

@@talos910 I hired someone to put new cabinets in. Cost was fair, 7,500 for new shaker style cabinets, new counter, sink and backsplash (tile)....probably won’t last like the original oak, but looks so good.

@Trig242 4 года назад

If I may, is the thickness of the wood 1/4"?

@Bloody_RedQueen 3 года назад

Omg, I have the exact same hideous cabinets, turd brown and everything 😂

@lindachmelecki1480 3 года назад

Can u paint the inside with a paint that doesn't peel

@StatUpBox 3 года назад

yes, you can. later on we did. if its a solid wood cabinet you can sand down and paint. there are many inside cabinet paints. you can also cover with vinyl material with many different designs .

@armymom7857 4 года назад

What kind of wood did you use?

@JesusFreakJene 4 года назад

What do I do if the old hinges are painted and I cant remove the doors from the hinges? Can I install this while they are up? ty

@StatUpBox 4 года назад

Yes you can. maybe a nail gun or stapler/nail gun would make the job easier.

@r3drift436 4 года назад

score it with a xacto knive or good old utility knife blade, get the edges and keep digging in it until you remove grime, paint and junk that's made them hard to take off. elbow grease and evetually youll get them. Also i would suffest using wood filler or alterntives to fill in the possible dents or holes left by the old hinges.

@debbiewilson9712 4 года назад

Do you do drawers the same way?

@StatUpBox 3 года назад

yes

@SpecialK2644 4 года назад

The two in the middle look like they belong together and the two on the end. Did you put them back in the correct order? That would be me......I would do that!

@barbkeen1221 4 года назад

Lol! That would be me too! AND, I'd probably put the first two on upside down! 😉😂😂😂