HOW TO USE AN ANGLE FINDER 

Had that little yellow angle finder for 10 years, now I finally know how to use it! Thank You!

I think this video has saved me! Now I can install my dollhouse baseboards and crown molding with more precision. You have no idea how much I appreciate this upload. I hope you live a charmed life, Caliber8 Tools.

Hey man I know topics like this seem rudimentary to some but for guys like me who forget things or "been awhile" since I've done angles with a miter this video was the perfect refresher! Thank you for making this. This was explained super easy not only to comprehend but using many tools of today made your demonstration very easy to remember!!! Oddly enough I just needed a refresh finding a odd angle on some aluminum pipe I'm cutting pie cuts from and just needed to see someone use basically and specifically all these tools you used and just made me life soooo much easier!! Thank you

Such a great teacher... wow!!! I finally get it about angles.

Excellent video, man. I appreciate you explaining everything and not assuming we understand the basics. 👍🏻

Fantastic job explaining the use and purpose of these angle finders. Thank you.

So incredibly helpful!! Thank you!!! You are an excellent teacher.

Thank you for taking the time to produce this very informative video. It's very helpful. Have a great life and don't ever stop teaching. Bill

Best video on how to use the empire tool. Thanks so much for this!

Thanks for your videos. They are very helpful and you are a good teacher. What you do matters!

Thank you so much for this video. It will be a great help in my dollhouse now I finally know how to use my yellow angle finder!

Thanks for posting this how-to-video. I'm using the yellow analog device. Your explanation on using it is excellent.

I found exactly than I was looking for!!! Thank you so much for the info.

Thanks so much for doing this. Very clear explanation. Couldn’t make sense of these tools before. Appreciate it.

Very clear explanation! Did not know how to use the yellow one. Thank you!!

Thanks man I subscribed and liked your video. Keep it coming.

Bill, great video. Your a natural teacher.

Good job with this video. I thought the General angle Finder I have would be simple and easy to use. I always was puzzled by it. You clarified things well and your presentation was very easy to follow. 👏

You do a fantastic job teaching!! Very very good!!

Oh my, I couldn't believe my eyes when I saw the yellow angle finder on your video. I'm like other, I've h ad one for years and had no clue how it works. Thanks for sharing this video.

Thanks, Mister, it never hurts to get a refresher. Definitely has been a while since I was doing production machinist wotk

Straight to the point. Not a lot of chit chat. Tx.

Thanks for keeping it simple. Really helped me.

Looking forward to maybe a future video explaining the use of the other surfaces uses and how-to's!

Very good video. I've been away from using these devices for a few years. This is a great refresher.

Thanks! Very informative, your video cleared up a lot of confusion for me.

Really like your clear & thorough approach to explaining tbings

Thank God! You are a blessing from above. I wish I had you as my teacher 50 years ago when I was in class. I could have become a star pupil instead of a struggling dunce. I had to teach myself geometry in my mid-30s because I enjoy DIY projects and I wanted to be better at them. You simplified what can be considered as difficult.

You are a good teacher. Wish I knew you or met you a long time ago. TY :)

GREAT VID!

You are so smart and this video is very informative. Thank you for sharing. 👍🏻

You're a great teacher!

Thank you for your content!

"Machined to tolerances beyond belief" 😂😂😂 I'm going to think of that every time I'm measuring something now

Very useful. Thank you

Great job, just what I needed

Wish my shop teacher in high school was this eloquent. Oh had a play back button.

Thanks alot bud! Very helpful 👌

Great content! Thank you!

Great video! Keep up the good work!

thanks my brother, a great video, step by step. great for people with ADHD, me.

Great video, thanks for sharing.

This is an incredibly detailed and helpful video. Thanks for putting this together. A question- can you scribe an angle onto a long, flat panel of wood using the analog angle finder? Or would that be a better job for the machinist's protractor? Asking because I need to cut an angled notch out of some wainscoting due to an irregular wall corner shape. And it seems like the analog angle finder is good at identifying the angle, but not as good as scribing an angle line that I can cut along.

This helped A LOT.

Nice, now I have new skill! Thanks

Man, Good Job. More videos like this

Thank you for sharing.

Very helpful,thankyou!

Thanks for the video it helped me out a lot

Brov. Thank you! Now I can go out and finish my kiln :)

Great video, thank you!

Wow, glad I found your channel. I have to two non-digital angle finders but never understood them. Thank you for the great explanation!

Great teaching video.

Really useful - thanks!

Thank you!

Absolutly useful ❤🌼🌻👌🙏🙌👍👏

This is exactly what I needed. I am trying to hang a wooden bird nesting box in my yard on a wall that has cedar shakes. Cedar shakes are thin at the top and thick at the bottom. I want my bird box to hang straight and not lean back and could not figure out how I was going to figure out the angle to then know how thick of a shim I will need. I am going to pick up the first one you showed tomorrow. Problem solved. Thank you so much for a very useful video.

Very helpful. Thanks.

Good video about how to read angles using angle finders and showing the different types. Two suggestions: #1) show just a little simple geometry with a right triangle and show the 3 angles created when scribing a line - where you scribed a 60-degree angle, also show the viewers the 90 degree angle, and the 30-degree angle, which leads into #2) show viewers how to translate the 60-degree angle you scribed on the 2x4 to the proper angle set-up on a mitre saw, which would be 30-degrees (i.e. 90-60 = 30). One criticism: saying 92.2 is close to 90 is not accurate. Actually, 89.6 or 90.3 is close to 90. In the beginning of your video you mention that being off by a few degrees can be bad, so your video should reflect that when you say you're "close" to something. As a positive, the "90" degree angle you measured, at first glance, looks square, but you're measurement showed otherwise. Looks can be deceiving, so "always measure twice and cut once..."

Thank you bro. I’m trying to get the right angle for legs on a table . Thankagain

Thank you sir i am only ten but using this tool I like your effort Kepp its up!

I learned a lot. give it time and your channel with grow. you just earned another subscriber :)

Super helpful Ty

Subbed!!

Thank you

Cool tutorial!

Thank You…🙌

great stuff

Question so I'm cutting baseboards. When I find the angle as you have shown do I cut both boards at a 50 degree angle or do I divide by 2 and cut both at 25? I'm new to this as you see lol

Can you do one using this to cut crown molding? I have a project later today doing that

Great video for a refresher in basic geometry! There is nothing worse than an ugly angle opposed to acute angle🤣🛫

Great video. Please consider to review the sound volume...getting higher especially on the intro part. If you are wearing an earphone...there is a sudden surge of volume.

Great tutorial; but I am curious on finding angle on a cleaver knife. Thanks

Hi why we need to check reverse $ Thanks

How can you measure an angle on a diameters using the second to the angle gauge?

I hoping to learn more about angle's

Drill ka angle kasa sat kari

can you post videos on knifes. Thanks

Finally!! A black guy that knows his stuff.

Security at evergreen.. I see you know your tools..

Why would I "Hit the like button" before watching it Too many presenters assume they are a Billy Big Bollocks whose content automatically deserves a thumb up Everybody knows how it works and you'll get a 👍if it is good

Well done!

The first measure, 150, was not flush on both arms. It would have been 135 and 45 or 180. Measure again

Great video, but damn that intro music is loud AF

Too much Discourse or speech

lol! a "how to" video that does it wrong!!! For this tool the object your measuring has to be touching both LEGS. And not a the leg and protractor plate that is shown @4:45. if you do it correctly then your acute angle would read less than 90 like it should.

Please,check you audios, they are realy bad.

Wow that was bad...