Тёмный
No video :(

How To Use An English Wheel | Simple Instruction 

The Fab Forums
Подписаться 320 тыс.
Просмотров 41 тыс.
50% 1

On this episode of The Fab Forums I wanted to go a little more in detail on how to use an english wheel. I also wanted to keep the instruction as simple as possible. Hope that was simple but informative.
www.metalsuper...
Welcome to The Fab Forums. My name is Kyle Voss and I am a maker that produces Custom Automotive Fabrication content of all forms for you. Carbon Fiber, TIG Welding, Metal Shaping, Hot Rods, Muscle Cars, Custom Choppers, and everything in between. I work hard to bring you new content on a weekly basis.
Here are some of the builds you can find on this channel.
I have built several Chevy trucks on this channel. The first was my 1964 C10 named Crown Spoyal and the most recent C10 truck project was the 1969 I currently have named the Black Pearl.
I am also finishing up a custom twin turbo Ford Mustang build I call the Gray Goose. It’s a 400 cubic inch Windsor style engine with twin 70mm turbos. I am hoping to make around the 1000 horse power mark to the tires on this particular build.
Last but not least is the one off custom hot rod build called the Bibbster. This is what I call a modern day hot rod. It’s made from an old Ford Mustang foxbody, but made to look like an old school open wheeled hot rod.
I also feature other fabricators and shops like Cutworm Specialties hand formed aluminum wide body kit for a BMW e46. Jeb Greenstone has also built a twin turbo, coyote powered model A style hot rod from scratch, and is currently building a Toyota TE72 wagon drift car powered by a 1UZ Lexus v8. Jeb’s custom fabrication skills are fun to watch and always make for good videos.
Check out my playlist to see some or all of these builds.
My Clothing Company - www.killfab.com
You can always find me here:
Facebook: thefabforums
Instagram: @thefabforums
Twitter: @thefabforums
SnapChat Username: vossperformance
What I Use To Film:
Canon G7x - amzn.to/2kAWnTe
Canon 70d w/ 18-55 STM Lens - amzn.to/2kak7gr
Canon 6d mark ii - amzn.to/2GGrDrj
Canon 10-18 STM Lens - amzn.to/2kagirC
Camera Gimbal - amzn.to/2KOj28x
Rode VideoMic Pro - amzn.to/2kaebnE
SunPak Tripod - amzn.to/2kB4aR2
Camera Slider - amzn.to/2k4bKR3
Pinnacle Studio Ultimate - amzn.to/2jGwORu
Fluid Head Tripod - amzn.to/2kxoAdM
Camera Lights - amzn.to/2l5uShF
As an Amazon Associate I earn from qualifying purchases

Опубликовано:

 

26 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 67   
@buildbros2088
@buildbros2088 5 лет назад
You’re very well educated on metal fab. I love how informative you are! Keep em coming.
@Kingcadillac816
@Kingcadillac816 5 лет назад
thinks for your time and work to produce videos i injoy watching helps me be at ease with not being able to by watching and injoying other builds
@T.Russell3155
@T.Russell3155 5 лет назад
Very cool, one of the few pieces of equipment I have never used, would like to have one for transmission tunnels. Great video!
@Standas01
@Standas01 5 лет назад
Good to see you back in the shop 👍👍👍
@ThatV12MiataBruh
@ThatV12MiataBruh 5 лет назад
Can't wait for videos in the new shop🔥🔥
@Thefabforums
@Thefabforums 5 лет назад
meeee toooo
@fattback3780
@fattback3780 5 лет назад
Great explanation of a badass tool. Band method never seen before. Thanks.
@Thefabforums
@Thefabforums 5 лет назад
thanks
@jenky1044
@jenky1044 5 лет назад
@fatback He did a vid about 4mos ago on this that is good.
@cadlac59
@cadlac59 4 года назад
Thanks mate, I enjoyed that. I’m a tradesman sheet metal worker and have been for years. I’m just getting into doing some automotive panel stuff now though. Keep up the good work 👍
@cecil6711
@cecil6711 5 лет назад
Fantastic explanation. Thank you for the education. :-)
@RatRodBobBuilds
@RatRodBobBuilds 5 лет назад
Just starter a Rat Bike/Pit Bike Junior Chopper (inspired by yours) so now I need one of these bad boys to make the tank and rear fender! Thanks for sharing your knowledge!
@Thefabforums
@Thefabforums 5 лет назад
right on !
@edhill8860
@edhill8860 3 года назад
I've just bought one, so find it really interesting and informative
@TrickTools
@TrickTools 5 лет назад
Great Video Kyle! informative for sure! Thanks for letting everyone know where to get a MetalAce wheel!
@Thefabforums
@Thefabforums 5 лет назад
Thanks...no problem
@MrTimdtoolman1
@MrTimdtoolman1 5 лет назад
Thanks for the knowledge.
@Thefabforums
@Thefabforums 5 лет назад
no problem
@TrojanHorse1959
@TrojanHorse1959 5 лет назад
Great "How To" video Kyle! Thank you!
@Thefabforums
@Thefabforums 5 лет назад
no problem....glad you dig it
@Vkandypaint
@Vkandypaint 5 лет назад
Thanks for making the time to make this video! Would like to see more demos 🙏🙏🙏🙏
@Thefabforums
@Thefabforums 5 лет назад
will do
@1dickycat
@1dickycat 5 лет назад
Very well said and I like how you put this together. Simple and easy to follow along 👌
@Thefabforums
@Thefabforums 5 лет назад
thanks
@onemeanbird.5305
@onemeanbird.5305 5 лет назад
Really nice educational video!
@oov55
@oov55 2 месяца назад
GREAT!
@darwinw4226
@darwinw4226 3 года назад
Perfect explanation for a beginner. I learned a lot! Subscribing. Thanks!
@shanewright6958
@shanewright6958 5 лет назад
That's a great video 👍
@Thefabforums
@Thefabforums 5 лет назад
thanks
@edhill8860
@edhill8860 3 года назад
Thank you for your video
@z50com
@z50com 5 лет назад
NICE!
@markalbrecht2444
@markalbrecht2444 5 лет назад
Hey , bro. Hope everyone is doing well ! Videos looking good ! Keep up the good work !
@Thefabforums
@Thefabforums 5 лет назад
thanks
@chrisdeli7547
@chrisdeli7547 2 года назад
10:44 you stretch the metal and it goes longer and fatter? i think you missed it. still nice job. love your videos.
@single_cam9199
@single_cam9199 7 месяцев назад
What are you putting on the fox so it doesn’t rust
@bryanroupe8646
@bryanroupe8646 5 лет назад
If your trying to ball on a budget the harbor freight central machinery English wheel isn't bad. But he did do some gussets on it which made it better. I made a few fenders with it. My dads made alot of stuff with it. Think he gave $250 for it with a coupon.
@guillermonieri4203
@guillermonieri4203 5 лет назад
Thank you. That was very helpful.
@Thefabforums
@Thefabforums 5 лет назад
no problem
@TheFred1952
@TheFred1952 5 лет назад
I've used the planishing hamer 1st than cleaned it up with the English wheel it will take out the hammer marks
@joeysawyer7572
@joeysawyer7572 5 лет назад
Very well done sir
@Thefabforums
@Thefabforums 5 лет назад
thanks
@ClimptonDiddlehopper
@ClimptonDiddlehopper 5 лет назад
Remember watching Jesse James on the English wheel. He described it as a great tool that makes blood shoot out of your fingers when you screw up....
@Thefabforums
@Thefabforums 5 лет назад
lol....yeah its pretty much the truth
@eppyschopshop
@eppyschopshop 5 лет назад
Hell yeah man!
@jefflewis5852
@jefflewis5852 3 года назад
Love your videos, I'm in process of making my own English wheel as I need to make a few panels. The main one is the rear deck that is about 5ft long by 4 ft wide which I need just a slight contour on of about 1 cm side to side but the length is far more contoured, any ideas on how to go about making this, Cheers, jeff.
@GibClark
@GibClark 5 лет назад
Thanks 👍👍
@301metalworks5
@301metalworks5 5 лет назад
Cool video 👍
@Thefabforums
@Thefabforums 5 лет назад
thanks
@garyparker2969
@garyparker2969 5 лет назад
WHAT??😔😔😔😔😔,,, NO "GO DO WORK SON" ????? Hahaha, Coooll Stuff Kyle, thanks n God Bless All
@Thefabforums
@Thefabforums 5 лет назад
thanks
@adsy9665
@adsy9665 5 лет назад
Cool as
@cpowerdesign
@cpowerdesign 4 года назад
Where can you get the rubber band from?
@haanstang648
@haanstang648 5 лет назад
Great video. Quick question that I’m sure you already answered somewhere. Are the goose headers just normal stock replacement shorties that you turned around and swapped sides?
@Thefabforums
@Thefabforums 5 лет назад
they are....they are some stainless shorties that I just welded some v bands too. I am actually using the same ones on the Bibbster as well
@haanstang648
@haanstang648 5 лет назад
The Fab Forums Good too know thanks. I have a blow through procharger 4 eyed fox that I’m board with and thinking of twin turbos since I have QT carb, regulator, fuel pump, ignition, and intercooler already. I have a set of stainless shorty equal length headers that I was thinking of using Love your videos and your inspirational quotes.
@yoesomite2199
@yoesomite2199 4 года назад
what happens if you over stretch the area, how do you shrink it back down ? Also , are there any tricks to holding a larger panel like a door skin if you don't have someone to help? ie can you use an extension table to support the metal on the on the side ?
@Thefabforums
@Thefabforums 4 года назад
there are ways to shrink but it isnt easy...best advice is to just take it slow
@beaconmania
@beaconmania 4 года назад
I have a dumb question: can this machine be use to repair a small dented satellite dish ? Thank you
@Thefabforums
@Thefabforums 4 года назад
yeah
@wilsonandrade2220
@wilsonandrade2220 5 лет назад
👍👍👍👍👍
@LvdMade
@LvdMade 5 лет назад
Vid is only in 360p quality ??
@Thefabforums
@Thefabforums 5 лет назад
its rendered all the way to 1080...youtube just starts them at the bottom. So you watch shortly after I post you only get the low res. I would bet if you watched it now 1080 would be available.
@stekiboy
@stekiboy 5 лет назад
19:32 I hear:"yeah boy yeah boy..."
@gregcressey1791
@gregcressey1791 5 лет назад
Not supposed to lube it causes slip
@Thefabforums
@Thefabforums 5 лет назад
you want slip...it allows it to stretch easier
@aromero9243
@aromero9243 5 лет назад
My girlfriend has a deeper throat depth. But for real she does. She modified her English wheel to have a deeper throat depth. Oh, also her throat can take a 10 incher lol
@davidr4332
@davidr4332 5 лет назад
I bet she don't use WD40 , lol.
Далее
How To Use A Planishing Hammer To Smooth Sheet Metal
19:47
C’est qui le plus fort 😂
00:18
Просмотров 6 млн
English Wheeling Made Simple
35:10
Просмотров 26 тыс.
Build an English Wheel!
13:50
Просмотров 27 тыс.
How to widen steel rims yourself!
34:13
Просмотров 70 тыс.
Making an English Wheel:  Building The Frame
34:34
Просмотров 19 тыс.
English Wheel Techniques by Peter Tommasini - Part 1
41:05
C’est qui le plus fort 😂
00:18
Просмотров 6 млн