How to Use: EDC Wrap™ by CKK Industries - Fabric Wrap for KYDEX® Holsters, Sheaths, and Other Items.

Подписаться 12 тыс.

Просмотров 7 тыс.

50% 1

This is EDC Wrap™ by CKK Industries. It is an adhesive fabric wrap for holsters, sheaths, and many other items. EDC Wrap™ is made from Cordura® Fabric and Polyester Oxford Fabric. Cordura® is known for its durability and resistance to scratches, abrasions, and tears. Both fabric types are coated in polyurethane and a water repellent for additional protection from outdoor weather effects. Cordura® and Polyester Oxford Fabric are commonly used in backpacks, military gear, and outdoor gear.
To use EDC Wrap™, simply peel off the adhesive transfer paper on the back of the EDC Wrap™ and begin wrapping your object. Make sure to place the object you are wrapping near the center of the sheet. Begin folding the EDC Wrap™ toward your object and firmly press the adhesive onto the object. You will need to workout any air bubbles that may occur toward the outer edges of the object. Finally, you can remove any excess material from your object.
The supplies and tools used in this video can be found at the following link:
All Available EDC Wrap™ Patterns:
www.holstersmith.com/vcom/mat...
Follow us on:
Facebook: / holstersmith
Instagram: / holstersmith
Newsletter:www.holstersmith.com/vcom/news...

Хобби

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@PkwyDrive13 11 месяцев назад

I have some of the precut ones for TLR-1HL and Holosun, the onky reason I'm worried is with the ones for the weapon light.. I feel like it'd mess up the smoothness inside kydex holsters

@OSKydexSheaths 7 месяцев назад

How do you drill/pierce through the Cordura and how do you get clean edges? Because the drill and sanding belt get so hot, my tools always stick to me. Thank you! 🙂

@KnifeKits 7 месяцев назад

We use an Exacto-style knife to cut the outer edges. Then, we use Kydex drills to create the passthrough holes. They do a great job of cauterizing the edges of the material. You can find those here: www.holstersmith.com/vcom/tools-drills-c-548_527.html To smooth and cauterize the edges of the outer shell, we use a 600 grit abrasive wheel. You can find those here: www.holstersmith.com/vcom/sandingpolishing-flap-wheels-c-548_805_806.html Let us know if you need more help! Alex

@Icephamtom 4 месяца назад

If I sent you my holster could you wrap it for me ?

@Highway9mm 11 месяцев назад

Will this wrap have any adverse results if you were to apply it to a flat sheet of kydex then proceed to heat it (bake in the oven) and mold it?

@KnifeKits 11 месяцев назад

Make sure you don't get the cloth (or Kydex!) too close to the heating element when warming. Like most cordura cloth, it will singe, or begin to melt, with too much direct heat exposure. As long as you heat it at a distance from the element, like you would normal kydex, it'll work just fine. Don't let it over-cook, however!

@Highway9mm 11 месяцев назад

Thanks. Over cooked kydex sucks. Looking forward to trying this product out.

@williesnyder2899 8 месяцев назад

Nylon - Cordura is nylon - melts around 400 - 450 degrees F., if I recall correctly. That doesn’t mean that less high heat would not also cause some structural disintegration and/or damage to the polyurethane water resistant backing of Cordura. It is possible to purchase Cordura without a coating, if that helps envision successful projects.

@Highway9mm 8 месяцев назад

@@williesnyder2899 totally helps. Seems that it would be safer to apply it after applying heat to the kydex. Thank you!

@danielschmidt1990 7 месяцев назад

Do you intend to make bigger sheets? 1 ft x 1 ft is a tiny bit too small for my intended usage.. And how about Europe? do you have a retailer or at least ship to EU ? :P

@KnifeKits 7 месяцев назад

Hi Daniel. We can do just about any custom size. However, you'll want to contact our sales/support team to discuss the dimensions that you need as there might be a delay on production, depending on the size. Also, we ship worldwide. Anywhere in the EU is no problem at all. We ship there daily. Thank you for watching, and let us know if you need more help! Alex

@HeathLCK 8 месяцев назад

No regular MultiCam?

@KnifeKits 8 месяцев назад

Hi Heath. Stay tuned. We're adding it with the next pattern release. We're also adding the new Nemesis line, as well. Please let us know if you have any questions. Thanks again!

@KnifeKits 8 месяцев назад

Update: MultiCam is now in stock! 🙂 www.holstersmith.com/vcom/edc-wrap-sheet-material-c-546_1057_1061.html

@MD-173 6 месяцев назад

can you provide me with a 12"x12 500D Cordura with poly in Ranger Green? Your site only offers 6'x12"

@KnifeKits 6 месяцев назад

It's half-way down this page. www.holstersmith.com/vcom/edc-wrap-sheet-material-c-546_1057_1061.html Let us know if you need more help!

@MD-173 6 месяцев назад

@@KnifeKits Thank you. Just created acct and purchased. Also Subbed. Question: I bought a Safariland 6354RDS in what they call "Ranger Green" which is actually 100% without question OD Green. So my intent is to disassemble the holster wrestle off their cordura wrap and install yours. Any tip on the removal? I wish you were in south Florida, I'd have you do it. Thanks again.

@KnifeKits 6 месяцев назад

About the only way I know is with a heat gun. However, with medium-high heat, you risk deforming the holster. I wouldn't add much more than low heat to soften the adhesive. Thank you for your business. Welcome to the addiction! Alex 🙂

@MD-173 6 месяцев назад

I think a heat gun on any setting is not good. @@KnifeKits