Do zhiyun plan on, or can they have a system that will allow the app to autofocus using the focus servos? I have a d850 which has god awful focus tracking and anything to help with that would be awesome.
No you cannot. This is only compatible with the Zhiyun AI Transmitter. Be very careful you don't do the mistake I did and buy a AI transmitter for the Weebill S as it WILL NOT WORK. The only reason to buy this MasterEye controller is if you have a Weebill 2, AND An AI Transmitter.
Hi I have just purchased the Zhiyun Crane 3s Pro which came with the COV-03 transmitter.. I have the COV-02 Receiver as well as the Remote and would like to sync the COV-03 Transmitter to the COV-02 Receiver. 01) is this possible? I have been trying with no success. I have an Atoms Ninja monitor and don't feel the need to purchase a MasterEye over and above, if this is purposely not an option by Zhiyun, I believe it is a big over site on their behalf as I use a number of different devices with my monitor and would prefer to only have to carry one monitor, so I would look at alternative products and sell the Crane 3s where I am not restricted. I have always gone with Zhiyun because of its functionality and there great compact design, but if I have to carry more equipment than what I require whats the point.
Hi I can’t use my follow focus control dial on my VC100 and I can’t seem to update it to a newer version. There’s no option for firmware on the zhiyun website can anyone help???
@@JasonVendryes I bought the ninja V last week. I have the weebill s, transmit, and the focus motor. I'm thinking of exchanging the ninja v for the vc100 now. I just wasn't sure if it was compatible thanks.
Hi guys, I hope Ill get answer to my question :D I have problem with masterEye that not all functions are working :/ and everytime when I restart it different ones are working :P only screen and not possible to use anything, or no screen and just recording button and again next time just zoom buttons :O I tried to fix this problem but still nothing. Or is it my camera that is not fully compatible ? I have sony a7iii THANX in advance
I have the masterye , weebill 2 and weebill 2 and I am using SOny A7IV. However, it does nto work as I am not able to control the camera setting when I am using it with any of the gimbal. Any help would be greatly appreciate.
@@WuAhGestudioproduction There total need connect with 3pcs cables, two cables connect the camera with the transmitter: LN-HAHB-A04 and LN-UCUS-A02, and one cable connect the transmitter with the gimbal which with the yellow mark:Type-C to type-C LN-UCUC-A03.
Greetings, Does anyone out there have experience with the VC100-Sony FX3 camera function controls? I am hoping the VC100 will control the Weeblii 3s and Sony FX3 via AI Transmitter while the camera rig is mounted to the bumper and the camera operator stationed inside of the vehicle.
Hello , I'm trying to use the Record and Photo Button in my Sony A7MIII , but I don't know why it doesn't work , may you help me ? , I would be so greateful if you could ... Greetings
Hi! For Sony A7M3, 1. Please select "PC Remote" for your camera's "USB Connection". 2. For Sony cameras, after connecting stabilizer and camera with control cable, power on the stabilizer and then the camera. Make sure the camera is fully charged. Please let us know if you have any other questions. Feel free to DM me here: facebook.com/officialzhiyunsupport/
seem to have problem with Motion control mode. (mobile phone app motion control works fine). When using Motion control mode on Mastereye, gimbal still swings to the left, even when mastereye is put on a table. Got the Mastereye replaced, and it now swings to the right, when Mastereye is put on a table with no one touching it. Anyone has any suggestions?
@@STUDIOJBAph Well it already is, I had exactly the same question and then I took a risk. If you have the Transmitter AI it will work. Because I couldn't find the information anywhere, I just made a video about it
I found out my issue the Gimbal. I reread the manual. When using the Transmitter AI, I failed to read where I had to switch the Gimbal Camera Setting to cca from the camera one. Once I did that I got the controls I was looking for.
@@mattpallotta Yes I did all that and it worked but the focus function didn't work for my Bmpcc 6k pro as the usb port was where my ssd would go and that was what the device wanted to use for camera controls
