How to wash and lube rear bicycle derailleur. Bicycle maintenance.

Подписаться 39 тыс.

Просмотров 54 тыс.

50% 1

This video tutorial is about how to maintain your bicycle.
It often happens that the rear derailleur on your road bike has difficulty changing gears.
This is all due to the fact that the bicycle derailleur requires maintenance.
I'm teaching you how to properly remove a bicycle derailleur, wash it and lubricate it.
The bike derailleur service will be of the highest quality and will consist of several stages.
This video tutorial will be useful for all cyclists, both road and mountain bike enthusiasts!
Enjoy watching my cyclist friends!
00:00 Bicycle derailleur requires maintenance.
00:38 How to remove bicycle derailleur.
01:20 Remove the rear derailleur.
01:52 Dismantling the rear derailleur into small parts.
04:18 How to clean bicycle derailleur.
07:13 How to wash bicycle derailleur.
07:54 How to dry a bicycle derailleur.
08:33 How to assemble a bicycle derailleur.
11:30 How to lube a bicycle rear derailleur.
12:11 How to install a derailleur on a bicycle.
Thank you for your comment! 😍
if you liked this video,
share this video with your friends ❤️
it will help the development of the channel! 📈

Наука

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@NiceBikeService Месяц назад

Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤ it will help the development of the channel! 📈

@pablocortes1301 Месяц назад

Without an ultrasonic cleaner, how would you do the cleaning? What cleaning liquid do you recommend?

@vtrvr511 Месяц назад

Great video as always ! Could you please make one about SPD pedals ? Disassembling axles and balls, greasing, adjusting gap ? I'm not aware of any videos on maintaining SPD pedals' external parts (springs, bridges).

@D4WeeMaN Месяц назад

Gotta give credit where it's due. This channel is a gem and you're doing quality work. Chapters, timestamps, camera work, no annoying music, raw sound, full process... Just chef's kiss. A little feedback. It would be nice to know additional info about cleaning products: Is it degreaser? What type? Vinegar? Water? Isopropyl alcohol? What grease type? People don't know that certain grease can ruin your bike. How to deal with hard stuck dirt if you don't have an ultrasonic cleaner. What to do if you don't have X tool, etc, etc. I know how to do most of service stuff and have the essential tools, but there's always begginners that start from scratch. There's thousands of "top 10 tips" about this but very few people do quality work as you do. Just giving you some ideas for future content. Keep doing what you do! Thank you.

@NiceBikeService Месяц назад

Thank you for your feedback and advice. Indeed, people often ask about fluids and lubricants. We try to answer in comments, some explanations are in subtitles. In the old videos, washing and cleaning is done without an ultra-sonic washer, with hands and brushes😃

@robertcabral1366 Месяц назад

Thanks for the informative video. In the past, I wouldn't take apart the derailleur to clean. Unfortunately, I learned the hard way, that my derailleur jockey gears would wear down, or stick. The cleaning and lubricating of them helped them last longer and the bike pedal easier. Thanks

@NiceBikeService Месяц назад

Thank you for your comment! ❤️❤️❤️ Share this video with your friends, it will help the development of the channel! 📈😘

@alextatargta892 Месяц назад

Дивлюся ваші відео - дуже подобається, як охайно робите. Але цього разу трохи не згоден з побаченим. Вимито/відчищено звісно бездоганно, але при цьому скоріше за все було і вимито консистентне мастило з пружини, яка лапку натягує. Я б ще додав маленьку крапельку консистентного мастила на вальниці роликів - коли свої велосипеди обслуговую, то так і роблю.

@NiceBikeService Месяц назад

я з Вами згодень, щодо пружини лапки, бажано роскручувати. але на практиці, ми помітили, що нічого страшного з цим коїться. Вийнято - це пепемикачі зі Shadow+. а щодо ролликів, так одні кажуть, що треба мастити, інші кажуть навпаки) типу мастило натягне більше піска і воно там буде шкрябати. с заводу мастила немає, дорочі) знову ж таки, при експлуатаціі не помічено різниці)

@alextatargta892 Месяц назад

@@NiceBikeService тоді по роликам це справа смаку. Я наношу неймовірно мало - малесеньку маслянисту плівку. І за рахунок цього бруд якщо і натягується, то не значний мінімум.

@marcingadysz4012 Месяц назад

Cudownie się to ogląda. Dziękuję

@NiceBikeService Месяц назад

Dziękujemy za komentarz! ❤️❤️❤️ Udostępnij ten film swoim znajomym, pomoże to w rozwoju kanału! 📈😘

@larissamelo7404 Месяц назад

I love watching your videos, and it's so satisfying to see the difference in the end, how it was and how it looked after cleaning and maintaining the gearbox, keep making videos like this👏🏼🧰❤

@NiceBikeService Месяц назад

thank you for your comment! it's very nice to see girls among my subscribers!!!) ❤❤❤

@steelisreal4313 Месяц назад

Id like to point out for anyone new to this and emulating...make sure the guide pulley is in the right place..the guide pulley and tension pulley are different...also use threadlocker medium strength

@glen3509 Месяц назад

My Shimano M770 XT shadow derailer had sealed pulley wheel bearings. I bought this derailer in 2009, and i finally had to replace them two summers ago.

@NiceBikeService Месяц назад

interesting story

@glen3509 Месяц назад

@@NiceBikeService Um...ok😁👍

@RobertKwiatkowskiPL 26 дней назад

After dropping the derailleur body into the ultrasonic cleaner, it should be your duty to clean and apply new grease to the derailleur tension spring and the derailleur carriage spring.

@NiceBikeService 25 дней назад

thanks for the advice ! 😘

@RayRomero-nc2no Месяц назад

What kind of ethanol does Da Shen use to clean oil stains?

@paolopetrozzi2213 Месяц назад

Thanks.

@NiceBikeService Месяц назад

Thank you for your comment! ❤️❤️❤️ Share this video with your friends, it will help the development of the channel! 📈😘

@marros5547 Месяц назад

¿No thread lock? It's always a must.

@michaelbenkert2604 23 дня назад

Which oil do you use?

@jaitonballa6787 Месяц назад

why no grease on the pulley wheels?? thats gonna be creaky after a sort ride.

@NiceBikeService Месяц назад

There's no lubrication in this unit from the factory. Why not?

@florentg7469 19 дней назад

Salutation... Je viens de faire un peu de nettoyage de ma transmission mono 12 vitessse XT sur mon vtt , et en remontant les galets du derailleur arrière je me suis aperçu qu'il ne tourne pas dans le bon sens lorsqu'ils sont montés "écriture face extérieurs" du dérailleur. Le galet g est bien en haut et le p en bas.. on m'avait dit ecriture côté extérieur mais là je suis dans le flou... si vous avez des explications.. merci d'avance...

@NiceBikeService 18 дней назад

Bonjour. Je ne sais pas quel modèle de dérailleur arrière vous avez, mais si vous regardez le modèle RD-M8100, vous ne verrez pas d'inscriptions sur la face avant des galets. Vous trouverez une description détaillée de vos pièces sur Bike.shimano .com

@dekubaru1111 Месяц назад

Om spedah saya kalo di oper gigi ko peralihan giginya telat ya itu kenapa ya..?

@maximbezzubenko4150 26 дней назад

На 6:00 я подумав: "О! Так ось як робиться пепсі-кола"

@NiceBikeService 25 дней назад

😸

@piotrdelankiewicz7596 Месяц назад

Należało by jeszcze wyczyścić sprężynę napinającą wózek. Na pewno dostał się tam płyn. Co po czasie doprowadzi do zardzewienia sprężyny. Poza tym OK.

@blackIwaterIpark Месяц назад

Świetnie to wygląda - części po myciu wyglądają niemal jak nowe. PS. Jak długo już jesteś w branży serwisu rowerowego? Pozdrawiam! 👍🙂

@NiceBikeService Месяц назад

Dzięki za komentarz! ))) 9 lat

@blackIwaterIpark Месяц назад

@@NiceBikeService : 👍👍👍

@tayfunguven6263 Месяц назад

Eline saglik muhtesem yanliz yeni taksaydin pahali degil o kadar 😊

@NiceBikeService Месяц назад

Bu doğru))))) Teşekkürler!

@LunguPetreBogdan 26 дней назад

I need a botle of oil with that small needle like yours. You know where can i find something like that?

@NiceBikeService 25 дней назад

You can find a bottle with a long spout, like a hair color, sealant, or motor oil. Cut off the spout slightly and put on a needle from a pharmacy injector.

@steelisreal4313 Месяц назад

Unfortunately the grease on the internal springs will be eliminated. Short term probably doesnt matter but long term it probably will matter.

@user-il8xu6gw2k Месяц назад

勉強になりました👍

@NiceBikeService Месяц назад

コメントありがとうございます！❤️❤️❤️ このビデオをお友達とシェアしてください、それがチャンネルの発展に役立ちます！📈😘

@lonerbikes Месяц назад

What detergent do you use here ?

@NiceBikeService Месяц назад

for automobile engines

@kiohin Месяц назад

Fajnie, że pokazujesz jak to się robi w PROFESJONALNYM serwisie. Szkoda, że nie pomyślałeś, iż normalny posiadacz roweru nie kupi myjki ultradźwiękowej za kilka tysięcy, żeby umyć element za 100-200 zł... Mam też zastrzeżenia do tego, że nie piszesz co wlewasz i w jakich proporcjach. To czerwone to oranżada a potem wódki dolałeś? Profesjonalny serwis, gdzie same narzędzia i sprzęt to kilkaset tysięcy złotych to może tak wygląda. W przydomowym garażu użytkownik umyje to myjką ciśnieniową lub parową i tyle.

@chosenfish Месяц назад

Що за рідина для замочування і чим змастили наприкінці?

@NiceBikeService Месяц назад

концентрат для двигунів, а кінці мастило шимано

@napoli4624 Месяц назад

che prodotto hai usato per sgrassare?

@NiceBikeService Месяц назад

isopropile, benzina

@marcingadysz4012 Месяц назад

11:34 Jak się nazywa ta za oliwka?

@carlos.enriquehernandez.al8520 18 дней назад

No se ve que le agregue ninguna lubricacion

@NiceBikeService 14 дней назад

Se puede engrasar, pero no es necesario

@TheParsifal1 Месяц назад

rimontare quelle pulegge e tutte quelle viti senza un filo di grasso non mi pare una buona idea

@stanleyuk1 Месяц назад

I think cheaper and faster is get the new one. All depends what kind of bike you have. Expensive parts are worth to keep clean and nice.

@NiceBikeService Месяц назад

I agree! but the replacement part is not always available

@stanleyuk1 Месяц назад

@@NiceBikeService yes, I had that problem with shimano 4600. At the end I got shimano 105 group set.

@jackdanyal4329 20 дней назад

I understand that the video just for asmr and content, but a new rear derailleur (claris especially) costs around $20. not worth to spend so much time on cleaning

@NiceBikeService 18 дней назад

We tried so hard for the video. We don't bother with regular maintenance as much. But such switches are more expensive for us because of customs clearance

@serhiizabobonin1016 12 дней назад

I'm a sergeant in Ukrainian defence forces. Bike maintenance is therapy for me, switch to peaceful life, a bit. It costs more than 20$.

@Cycle-Tourer Месяц назад

Unnecessary cosmetics. I ride bicycles everyday last 34 years. I never disassembled and cleaned my derailleurs except of the pulleys instantly without remove them. one minute job yearly. I have right now 5 different bikes. The oldest one from 2008. All the derailleurs working great without any necessity to replace to new one. All those years I replaced just recently 2 pulleys for one of the derailleurs. All the derailleurs are 9 speed Shimano Deore - old style: RD-M591 and RD-M510. The weakness of most derailleurs is the spring. And for that- you have nothing to do. Just to pray. And please never oil the spring. NEVER! Not even necessary to clean it. Just leave it as it is. Of course there is one exception: In muddy situation. But not necessary to disassemble anything. And again don't spray the spring by WD40 or something similar. NB my comment is only about the derailleurs. Of course you have to change the cables every 2-3-4 years. Depends how often you ride.

@GaLaxY-1905 Месяц назад

Every part of the bike requires maintenance.

@NiceBikeService Месяц назад

thank you for your comment! 😘

@NiceBikeService Месяц назад

✊✊✊

@vtrvr511 Месяц назад

Interesting commentary about the derailleur spring. Does this also apply to the external springs of the SPD pedals ?

@Cycle-Tourer Месяц назад

About SPD pedals: I use 22 years same model for all my bikes: Shimano PD-M324 pedals. It's dual use pedals: One side SPD, Other side flat pedal. This pedal model is maybe the most durable pedals Shimano ever manufactured. I use them on road and off road. I clean them just with Dry and hard brush, And yes I oil only the upper parts that contact the cleats without oiling the sparing. So far all the pedals working fluently. Some of them I installed first time 22 years ago.... I have another 2 new sets I bought about 10 years ago, But I still didn't use them.