This is pretty straight forward, you just need to make sure that you follow the directions. If you're installing an aftermarket 3rd brake light like this, amzn.to/3Sok8xl, you will still generally follow the same process. However, the following directions are specific only to the 3rd gen Toyota Tacoma. If you are using this guide for a different vehicle, be sure to find the correct wiring diagram for your brake lights.
Universal 3rd Break Light: amzn.to/3vPT4hs
Tools Needed:
- Socket
- Wire
- Electrical Tape
- Splicing and splitting tool: amzn.to/41ZUm5L
- Disconnect plug: amzn.to/3vHXozt
- T-tap: amzn.to/47A16s4
- Heat shrink: amzn.to/48I8Byv
- Patience.
Basic need to know:
- On a Toyota Tacoma the blue wire is positive (power)
- Green is negative (ground)
- If you are not tapping the green grounding wire, be sure to ground your cap or extra brakes wire to a bolt that contacts the trucks body.
My Amazon Links
Borla Stainless Steel Exhaust: amzn.to/3w70VaA
OVS 270 Awning: amzn.to/3wfIcKd
Rotopax Water: amzn.to/48g6mBB
XBULL Recovery Boards: amzn.to/49a8Xhr
Toyota Bed Mat 5ft: amzn.to/49eHqvE
22 июн 2023