How to Wire MULTIPLE 12V LED Rocker Switches [Simple Guide and Wiring Explanation]

Подписаться 33 тыс.

Просмотров 211 тыс.

50% 1

Quick and simple How to Wire 12V LED Rocker Switch - Simple Guide and Wiring Explanation. In this how-to video I how you How to Wire multiple 12V LED Rocker Switch. 💲Rocker Switches amzn.to/3dkH6h2 There's a bunch of different LED Rocker Switches out there, sometimes called Carling Switches and they vary between 2, 3 ,4 5, 6 and even 7 pins!
In this simple guide video I show you any easy explanation of how to wire up a 12v LED Rocker switch so you can get on with powering up your new Lightbar, spot lights, pump, camera or whatever else you are powering. Enjoy :)
⚡️Keen to support future content?⚡️
🎁 VSMH shop - www.videoshowmehow.com
🙏Check-out channel membership, Super Chats & Super Thanks
---------------------------------
💲 Parts from Video
---------------------------------
Rocker Switches - amzn.to/3dkH6h2
Check out the channel the single rocker switch explanation here ► • HOW TO Wire 12V LED Ro...
------------------
📱 Socials
------------------
I▶ www.videoshowmehow.com
I▶ Instagram - videoshowmehow
I▶ Facebook - videoshowmehow
I▶ TikTok - videoshowmehow
-----------------------------------------------
👍 About VideoShowMeHow
-----------------------------------------------
⏩ What's with the gloves?
Not after any RU-vid fame here which is why I'm not in the vids - they're not about me they're about the how-to! I used the gloves for the first couple of projects I filmed which just happened to be messy ones and it kinda just became a thing - easy to spot my videos! If that's not your thing and you'd prefer to watch a face, all good, I won't be offended, there's plenty of better looking ones to watch already on RU-vid ;)
⏩ Where did this start?
I really enjoy tinkering with different projects - they usually require a whole bunch of research and learning along the way. It's satisfying on doing a thing and standing back and going 'Yeah! Totally did that!'. I had a bunch of mates asking 'how did you know how to do that?' and 'I couldn't never do that myself so I thought; I need to start something where I can help others that might be thinking the same thing :)
⏩ What will you find here?
The purpose is simply to make these videos as top quality and helpful as I can. They will always be free, there's ZERO agenda and the only motive is to try and upload what I would want to watch to help with that particular project. I'm also keen to keep building this little community and will try to answer all questions when asked - fire away :)
#rockerswitch #ledrockerswitch #12vswitch
Disclaimer:
VideoShowMeHow assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not VideoShowMeHow. VideoShowMeHow cannot guarantee against improper use or unauthorised modifications of this information.

Авто/Мото

Опубликовано:

31 авг 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 251

@VideoShowMeHow 3 года назад

CHECK-OUT ALL THE 12v VIDEOS HERE 😃 -> ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2BikJusnD9Y.html

@jazielaugustine8139 2 года назад

You prolly dont care at all but does someone know of a method to get back into an instagram account?? I stupidly forgot the login password. I appreciate any tips you can give me.

@marshallanson1478 2 года назад

@Jaziel Augustine Instablaster ;)

@jazielaugustine8139 2 года назад

@Marshall Anson thanks so much for your reply. I got to the site thru google and im in the hacking process atm. Seems to take quite some time so I will reply here later with my results.

@jazielaugustine8139 2 года назад

@Marshall Anson It worked and I finally got access to my account again. I'm so happy:D Thank you so much, you saved my account !

@marshallanson1478 2 года назад

@Jaziel Augustine No problem =)

@flyingdutch9818 3 года назад

Finally! A tech guy speaking clearly and succinctly. Thanks mate, well done

@VideoShowMeHow 3 года назад

Thanks mate 👍

@m.coulter6984 3 дня назад

Great video, exactly what I was looking for to wire the rocker panel. Now on to learn how to wire the relay. Thanks

@guyshockey2975 3 года назад

Excellent! I'm going to be doing some switches in my boat and this was the best spent 10 minutes so far!

@devans911 2 года назад

Just what I needed! Replacing 8 rocker switches on a 1998 Armada deck boat. Your video and clear narrative put things together for me. The only difference in my situation is placing a breaker between sets of 2 switches. Thank you for taking your time to share your knowledge with the rest of us!

@smarty8772 10 месяцев назад

I was wondering the same thing, I saw another video where the guy split the power between the 4 switches he was wiring up.

@mental0883 2 года назад

Wow he made it look so easy. Brought my confidence up

@tywilkins7086 3 года назад

Wow - incredible video! Thank you SO much for this! I'm doing switches in a 1971 Volkswagen Buggy/Kit Car and this awesome info will be put to some fun use! Great work

@ML-xz8ik 10 месяцев назад

Your method of daisy-chaining is awesome!

@Intenslfled 3 года назад

Great video. Never would have thought to use that technique for the daisy chain. Cheers!

@tomg4245 2 года назад

Great video! It gave me an idea for my project. Looking forward to getting it done. Thanks

@peterhinton 3 месяца назад

Brilliant! You’ve just given me my next project.

@craigellem9113 2 года назад

Brilliant. I now know how to reduce my wires. I have a 1000 coming from all my switches so now I can just have one. Cheers

@grahamwest1079 11 месяцев назад

Wow been struggling all day with my switch upgrades now I have the answer many thanks

@winstonsmiths2449 Год назад

The daisy-chain technique is a DUH moment and BRILLIANT at the same time. WHY I never thought of that is my duh moment. Thanks for that simple but powerful tip! I subscribed and set notifications. Will be checking out your other videos.

@kitasuhill9667 2 года назад

Simple, direct, very useful !!

@zambomanbo 9 месяцев назад

I have 4 2 channel lights on my role bar on my truck so I'm wiring 2 switches 1 for the running lights and 1 for the flud lights this was so helpful in understanding thees switches thank you so much

@phbob-5547 2 года назад

Not nearly as intimidated as I once was. Single wire daisy chain is quite a helpful and efficient trick. Thx.

@ericgunnyporter8964 2 года назад

That is outstanding very well explained and I will be installing switches in my Jeep with a lot more confidence, thank you so much for the tutorial Keep the videos going we can learn so much from a good Tech. Thanks mate

@VideoShowMeHow 2 года назад

Glad it helped!

@haroldspivey198 Год назад

Awesome video, that will save a lot of wire. thanks so much for your time to share

@tylerjones3875 3 года назад

I’m no sparky but I’ll give installs like this a crack any day. Love to see tips with the daisy chain and using the same wire as you did. Might seem obvious to others but I’m sure I’d make life hard for myself and have spaghetti wires everywhere! Great vid man!

@VideoShowMeHow 3 года назад

Cheers! Glad it helped

@robfrost7352 2 года назад

Very helpful thank you I will be wiring lights and speakers in my side by side.

@joshauger9726 3 года назад

Thanks a lot , like the daisy chain technique ? I guess the same process can be used for running multiple penny lights ! (3/4) round lights !

@johncampbell5502 3 года назад

I loved how you just stripped the wire to daisy chain things. I was definitely about to cut the wire. That's why I always try to watch a few videos on the things I'm about to do. I'm replacing all the switches in my boat. Could you possibly do a video on how to wire a double pole/double throw switch? Up position would be just the red/green nav lights. Down position would be all three nav lights, red/green nav lights and the white stern light.

@VideoShowMeHow 3 года назад

Thanks for the comment - that's basically the core reason I started this channel... I really enjoy researching new skills and finding out how to do x task, then sharing with others who might be about the tackle the same job! I reckon it's totally worth the hours of effort in putting these together :) Re the video suggestion, thanks, will add to the list :) p.s Good luck with the boat!

@ivanechevarria8238 2 года назад

This video is absolutely amazing thanks 🙏🏻

@stevelavely 2 года назад

Thank you so much. You made this easy for me. I am running hood mounted lights that are ditch lights and also amber lights and than I am also running a air horn.

@VideoShowMeHow 2 года назад

Welcome!

@cedaroakfarm8596 5 месяцев назад

Great instruction. I'm wiring up a 5 switch box for my RTV SxS, which includes a USB charger and volt meter. To prevent parasitic drain, I want to put the USB and voltmeter on the last switch so it has to be on for them to work, and then can shut off when not in use. I also want to wire the small LED indicator lights to this switch so they come on when the switch is on too as it would be the first one I turn on. It is a bit of a puzzle. Then I'll change switches to use a whip switch, and ground light switch in there places,

@tylerkennedy28 2 года назад

Lot of help. Thank you!!!

@scottblair9232 2 месяца назад

I bought the same switches for my camping trailer operating 8 led yellow lights, 1 6"x4" led cooking floodlight and 2 front and back white reverse sml flood lights.

@melvincordier8058 3 года назад

Beautiful presentation

@thomasrobinson4634 3 года назад

Love the video, thanks! It would drive me nuts to have the voltage display upside down to the other switches though

@jacobhoogland8191 2 года назад

Great video man!

@maverickohyeah3756 Год назад

If your only using the switches as a signal wire to a relay could you daisy chain all the positives together and run it off a dash light wire to then shut the whole thing down once the key is off ( talking side by side situation) cheers.

@meadowbrookstables1893 6 месяцев назад

using the switches to operate log loader, coal loader, horse car and log unloader on a 75 year old Lionel Train set. thank you

@reidmartin3479 Год назад

Awesome video, thank you!

@steveg6853 2 года назад

Thanks again Adam, after buying the 4WD Supercenter Adventure Kings 12V control box I found out (and many others) the rocker switches were not powered up. I'm hoping this video can help us all. 4WD Supercenter wouldn't answer peoples questions on how to do it. So Ill let you know how I go. Cheers Champ.

@StansE250 2 года назад

G’day Adam ! Really enjoying your vids. I don’t know how often you check back on (older) vids, re: Comments. You wanted to hear about (our) Applications, and at the risk of being Wordy, here goes: 2003 Ford CamperVan switch panel in cockpit, two panels in cabin, and one at rear doors. I have a ‘habit’ of overusing Relays, in the aftermath of a vehicle fire some Decades past. My brother insists that the habit is ridiculous. Next, I have a pretty strong (distrust) of Chinese-produced wire products due to their proliferation of using CCA (copper clad aluminum) wire, as opposed to Better, Safer, more expensive true Copper. As it pertains to wire panels, I appreciate that you’re daisychaining using Your wire instead of oft-supplied, cheap #20 wire. My biggest question here is about power & loads in relation to daisychaining. Is it Safe to daisychain Grounds if each switch has varying amperage loads ? Is it Safe to daisychain the 12V switching feed in to say 6 switches, when/if more than one switch might be ‘on’ at same time ? Any changes to Fusing, wire size ? If you increase Fuse, doesn’t that create a risk if one switch fails during ‘on’ when chained to other ‘on’ switches ? The output To the end destination, do you always feed a relay from that line ? Several of my components are in the 30A range (driving, fog lights, …). I suppose my confusion centers around which legs should be fused, and how to protect switches, wire, etc when daisychaining ? I anticipate a small added fuse block somewhere in the cockpit to cover stereo components, and switch panels; but even those have current limitations. If I’m feeding straight 12V to that (added) block, out to switch, then daisychaining is moot, no ? Cheers !

@MrWiley3 Год назад

Very helpful to and clear details. I'm happy your here.

@VideoShowMeHow Год назад

Glad it was helpful!

@cadenwheeler Год назад

So very helpful, thanks

@ericawilliams18 3 года назад

Thanks ! I don’t know anything about electrical! I’m trying to use it to power my lights on my pelican bass raider 10e! I pray this works!

@VideoShowMeHow 3 года назад

Good luck :)

@Bianchi77 Год назад

Nice video shot, thanks for sharing it :)

@carrillosinglecab2027 3 года назад

This is Sweet love it 👍👍✌️

@larrymcwhorter1340 2 года назад

great vidio, going to put on 5 rockers on my side by side

@bretroehrick7219 2 года назад

Glad I watched this one I would of got it , but this way was better than my plan

@brian8431 3 года назад

Great video, I would like to know the little things also such as what gauge wire are you using and how do you hook the wire to the gauges so that they come on when your gauges come on? Do you use a t-tap and tap in somewhere? Also do you have to run the wires to the battery the positive and negative or can you use an expandable circuit and go to your fuse box and run the negative to a bolt to the metal frame? Things like that

@zacandmillie Год назад

That daisy chain method is brilliant,

@ElEsJuan-wn3pl 3 года назад

I like how easy it is set up. I want to make one myself but have one as a main power supply for the rest and make the others turn on and off with that switch, what would you recommend.

@muzzaball 3 года назад

G'day, these things are so painful, but useful nonetheless! Thanks for this tutorial and the previous. I really liked your simple way of ganging the spade terminals. Now to work out which pin is which on my 7 terminal momentary switch, tho I guess one side is lights and the other is load? Cheers mate.

@VideoShowMeHow 3 года назад

Thanks mate! Sounds right for your 7 pin.. night have to do a vid on it :)

@jonathanpalima8507 Год назад

This is the video that ive been looking for.. been planning to install an led fog light with high and low function and also planning on using a relay for both function and yes ill be using the same switch that you have here, may I ask if I should be still connecting a positive connection from the battery or I could just tap on to the + of accessory line when the key is on? Cause ive been thinking ive already got a direct + into the relays that i will be using so Im kinda torn what to do..looking forward for your safety and helpfull tips.. cheers mate!

@robertblain350 Год назад

well done!

@aussbasstony9763 3 года назад

Great video, Is it much different useing a Blue sea fuse block with this switch panel for a boat.

@stevestokes4206 3 года назад

Great video!! FIRST class

@jimncolleen1967 3 года назад

would love to see a video on a 3 way rocker with 7 pins

@VideoShowMeHow 3 года назад

Thanks for the suggestion, will add to the list 😁👍

@perrypasloski158 3 года назад

Great video and very clear instructions, thanks. A big help. I am doing something very simular in a Tundra. For the 12V switch power (not dash lights) to trigger the relay (load), I am thinking of tapping into a near by existing cig lighter, that way it is only powered when the veichle is on then i wouldn't need a new fused source. this should work right?

@VideoShowMeHow 3 года назад

Thanks and yes :) Just test your cigarette lighter socket to confirm it does turn off with ignition as adding don't. Have fun!

@craigwiddison4118 2 года назад

thanks!!

@samperras 3 года назад

Thank you

@davidd6003 2 года назад

Nice

@furqan_the_adventurer Год назад

Thanks!

@VideoShowMeHow Год назад

Thank you!

@mustapha2913 3 года назад

Tooooop ✔️

@scottbosley690 3 года назад

Going to use mine for a 1970 duster drag car going to power the reverse and air shifter. Have another switch panel from race wire salutations for fuel pump fan water pump starter lights

@number4777. 2 года назад

Good video

@VideoShowMeHow 2 года назад

Thanks

@wesloyet9329 2 года назад

Great content. Very helpful. Is there a way to have the icon lit up in the dark instead of the “dash” light on. When I’m in the dark and have a row of switches, it would be nice to know which one I’m flipping on. So the icon is lit up before your accessory is actually turned on. Thanks again for the content.

@VideoShowMeHow 2 года назад

Yes, you could just swtich around the dash light feed

@kenni411 2 года назад

the dash light I am assuming is a hot ? can I run it into the fuse box with a fuse tap for the headlights?

@gordonchibroski8919 3 года назад

Great videos! You are the best. How do I see all of your videos? I’m. Putting an LED light bar on the ROP of my tractor for forward lighting and two LED pods for rear lighting and need to wire to two panel switches to operate them independently. I have two wire harnesses with relays and need to know how to connect each part to battery, ignition, and lights. All videos skip the part of what wire goes where and hoping you can explain that in a video. Thanks for your clear and knowledgeable instructions. Gordie

@VideoShowMeHow 3 года назад

Thanks mate. You can click the channel name next to the profile pic and that will take you to the whole channel 👌

@tehdreamer 2 года назад

This is the best video on this because most people don't understand that they can wire the bottom LED lights off their dash lights so they are not always on.

@tehdreamer 2 года назад

Also, if you connect the positive of the LED with positive going to your auxiliary/relay, both lights will come up only when you press the switch. That's what I did.

@GumpterCrayon 2 года назад

So i got my switch panel all wired up like you do in the video. i bought a Relay wiring harness for a light bar and the wires going to the switch are a Positive a Negative and a yellow one with I assume if for the light on the switch the harness came with. Which one of the wires would I attach to my new switches? and what should I do with the others?

@jimgideon3333 3 года назад

Outstanding detail and instructions. Most do not know what daisy chaining is and you simplified it perfectly! Maybe incorporate relays to the load next time for us all????

@VideoShowMeHow 3 года назад

Thanks mate appreciate the comment 👌 Good idea with the relays, will add to the future vids list 😁

@benadams9125 3 года назад

Hi mate, Just watched your videos on 12v rocker switches. Loved it. Can you do a video or even reply comment, by expanding on once the switches are all daisy chained and wired up, how/where to wire the dash lights into physically on the car. Also, if running individual switches to a 12v fusebox, would that remove the requirement to daisy chain the 12v battery in line? Ben.

@VideoShowMeHow 3 года назад

Hey mate, will be releasing a full 12v system including light install as part of the dmax build in coming weeks 👍

@chefadambordonaro 2 года назад

Hey Adam, great video series. I am going to be using the rockers to power a light bar, some spot lights, and a usb. I wanted to get your feedback on another feature I wanted to add. I have a 2018 Jeep JK and wanted to be able to use the reverse led feature of some aftermarket tail lights to power on should I need light in the rear of the vehicle in lieu of adding on more lighting. Is it possible to have the taillight work on reverse as well as on demand? How would I connect that? Cheers!

@VideoShowMeHow 2 года назад

Hi Adam, are they LED now? On my JK I replaced the old bulbs with LED and added extra LED spots. Used the existing wiring. Trick is staying within the factory bulb w limit if that makes sense.

@MonacoMike 3 года назад

What a great way to daisy chain connections. I had never thought about stripping a wire bare anyplace other than at the ends. Many thanks for that great tip. Question about that USB receptacle, what voltage are you getting out of it" Isn't is supposed to be 5v ? Where did you find it? I have Carling Contura II switches all through my Class A motor home.

@VideoShowMeHow 3 года назад

Thanks 👍 Re the USB for these from Amazon, they're designed for 12v systems so there must be a step down or something in there. They've turned out to be super handy as that switch pod is right where my phone is on its cradle so easy to keep charged :)

@MonacoMike 3 года назад

@@VideoShowMeHow Many thanks for the quick reply. I just tried doing a search on Amazon but couldn't pull one up. What are they actually called? Do you have a link to them that you could share?

@VideoShowMeHow 3 года назад

@@MonacoMike will update the description :) www.ebay.com.au/itm/AU-Car-Dual-USB-Charger-4-2A-12V-24V-Lighter-Socket-Power-Adapter-Blue-Voltmeter-/313202820820?_trksid=p2349624.m46890.l49292 or www.amazon.com/dp/B088WV4PWN/ref=cm_sw_r_cp_apa_fabc_7-SYFb4PTQDVZ

@haleyammari8461 3 года назад

so how do you set up a switch for pattern changing for led lights

@gordonchristie8355 3 года назад

You only have one wire going to your devices. What do you do with the negative wire. great vid by the way,very clear and easy to follow. cheers Gordo

@VideoShowMeHow 3 года назад

You would just ground the negative wire from your device, just depends on your application

@robbedroy13579 2 года назад

Ground it back to the battery. The application is a 12v water pump.

@mrbenno 3 года назад

Thanks for the video, it was really helpful. So you ran one negative and one positive from the batter, a positive for the dash light and then a seperate wire from each switch to the relay to complete the circuit for the light bar, winch etc. How do you know what amp wire (& fuse) is sufficient for each of the positive and negative wires in given you might have multiple switches on at once?

@VideoShowMeHow 3 года назад

Thanks 👋 If you're running directly off switches then the main wire needs to be big enough to handle the 20amps total (these switch max) so total load is less than 20amps if that makes sense?

@mrbenno 3 года назад

I ran a 7 core 3 amp trailer wire through the firewall using a wire each for a positve and negative leed and then the remaining wires back under the bonnet for the relay switches. Wondering if I ran it in series like you have is it thick enough?

@VideoShowMeHow 3 года назад

If there's no load on the switches themselves and you're using relays for each then will be fine as it's just the led load 👍 Just remember to fuse appropriately and you're good 😬

@Taylorboy2392 Год назад

Is there anyway to have the illumination on the bottom (words) off with the switch off? I have a 3 pin rocker installed on my new golf cart for my radio and such but I don't want the bottom portion illuminated when the switch is off. Thanks in advance!

@gavinfisher8049 Год назад

Subscribed..nice work Adam.. tech questions. Battery power in when piggy backing each switch say each switch rated to 20amp if your running 4 switches what would be the SINGLE fuse amp rating to safely run the 4 switches. Secondly tapping into side light/dash illumination wire how many milliamps or fuse for that single wire run into the same 4 switches and should you fuse at fuse box or fuse behind dash area.

@martythornton604 3 месяца назад

Do you need a relay for each switch or just one?

@StansE250 Год назад

Is source power, feeding Panel, fused before it reaches the switcheS or is the fusing off of each switch, for the given apparatus powered ?

@joshpatterson778 2 года назад

Where did you hook the other power wire to? I did this exactly as you (I thought) but I have no illumination when key turns on, only when switch3d on. Any advice?

@tirryncasey5000 2 года назад

Could you please explain how to wire lights to be switched from two different locations ( front of car & back of car ) and what type of rocker switches are needed and if they are able to be daisy chained for ground and power. Thanks

@jonharwood6133 Год назад

Great video. If using a relay instead of going to the accessory a wire would go from the switch to the relay correct?

@VideoShowMeHow Год назад

Yes

@jonharwood6133 Год назад

@@VideoShowMeHow Thanks. I did get thrown a curveball though. My Rigid lights came with 3 wires. I know red positive black ground where do I run the white wire???

@crawlycal1253 2 года назад

Great video! Do the usb ports have constant powered even when the vehicle is off? If so is there a way to wire them so they only power on when the vehicle is turned on?

@VideoShowMeHow 2 года назад

Depends on where you power is sourced.. you could have it relayed off a separate circuit that only gets powered when the car is 'on'. Have more 12v vids coming soon (eg with relays etc)

@GatorOverland 2 года назад

This was a great tutorial for making daisy chain jumpers, especially for doing the inline insulation removal to make it one continuous wire. I do have a question with regard to your (+) output wire from your switch to power your device/load. Since you have your single (+) & (-) wire leads to go to your source of power (battery) and the single output wire coming from the switch to go to your load i.e. a light bar. Where do you ground/earth your light bar to? Typically lights have a black (-) and (+) wires to power them. If you have one (+) coming out of the switch to connect to the red wire on the light, where do you connect the black wire on the light. Lets give the example that you have a light bar at the back of your vehicle and you switch panel is at the front of your vehicle. You are running a single (+) wire from your switch output to your light bar (+) wire. You still have a black wire on you light bar that needs to go to ground/earth. Ideally vehicle batteries (-) are grounded to the frame. Are you just finding a bare metal area, frame/body/nut/bolt to attempt to find ground/earth to to complete the circuit. I am making a switch panel out of a plastic project box and plan to have a single (+)(-) source "IN" and daisy chained to 6 switches much like you have, and then having a cable gland with the 6 (+) switch outputs coming out, but im curious about what to do about all the load/device grounds/earths. Granted i am able to find a nut or bolt near by with ground/earth continuity to the frame, is that all i have to do? Or should take that main (-) coming in to my box and and daisy with eye connector over to a threaded stud in the box to make a ground/earth stud and secure with a nut, and then take 2 eye connectors and twist 3 wire lengths together and crimp in each connector and then fasten to the ground/earth stud, and run the 6 (-) wires out of the cable gland with the 6 (+) wires? i hope i made any light of sense. Thanks for your time and any advice you may have.

@VideoShowMeHow 2 года назад

Hi, yes in most cases you can earth to the chassis/body

@GatorOverland 2 года назад

@@VideoShowMeHow Thanks for the quick reply… I’ll see what I can do about grounding to an aluminum rack 😂😂😂

@VideoShowMeHow 2 года назад

@@GatorOverland haha yes maybe not to the rack 😁

@kieranwilkie1 Год назад

So is this wired in parallel? I’m sure you mentioned it is wired in series but I thought it was the other way around?

@aldo9564 3 года назад

Could you also incorporate a Seven Pin Switch tutorial ? Cheers !

@VideoShowMeHow 3 года назад

Thanks for the suggestion, will add the list! :)

@davidnew1887 3 года назад

@@VideoShowMeHow 7 pin

@charlie_sin_mag 3 года назад

Can you daisy chain negative connections while separating the positives? (Positives are going to a connecting block)

@VideoShowMeHow 3 года назад

Yep sure can. Just got make sure big enough wire

@eric.cortess 3 года назад

Hi, I have six switch panel built like that and I need a tutorial to hook it up to six five prong relays to led lights please.

@VideoShowMeHow 3 года назад

Thanks for the suggestion, will see what I can do :)

@Brandon56146 3 года назад

Awesome Video! I do have a question. So I'm planning on having 3 switches and a volt reader. One for a Radiator fan, the other 2 for 2 separate led light set ups. So, after I set them up like this video showed, do I connect the Positive Power directly to the battery?? And for the dash lights wire, I have an adjustable lighting in my car. Do I hook it up to that directly to that or to the switch on my headlight switch is? Just need some help and can't seem to get the answers I need online.

@VideoShowMeHow 3 года назад

Would recommend using a relay particular for the rad fan. Also make sure to use a fuse on the battery end. I have more vids coming out soon that run through switches and relays, ideally to answer exactly your kind of question :)

@Brandon56146 3 года назад

@@VideoShowMeHow I have read about people finding the grounded prong in the radiator fan relay, putting wire in that specific slot and pressing the relay switch into it. I don't know if that is okay or not so I've been very skeptical of that method. And just read that my specific LEDs can be hooked up to the the fuse box and they have the proper circuit adapters with the fuse for them so I think I won't need the switch for those but definitely need one for the radiator fan and how to have the volt reader read the battery. Forgive me, very new to electrical stuff..

@toddjenest3212 3 года назад

Great video! I bought the Nilight 5 Rocker Switch Panel to connect all the LED "fog" light on my truck. Those jumpers are already installed on the panel, so I guess it's confusing me how to connect their wiring harness, which includes a white constant, to the rocker switches? Thanks.

@VideoShowMeHow 3 года назад

Hey mate, I'm not familiar with that panel, did any wiring diagrams come with it? It would depend if your lights use relays or not.. as a min you'd need fused power to the panel that's enough for its Max load.

@toddjenest3212 3 года назад

@@VideoShowMeHow The wiring harnesses include relays.

@toddjenest3212 3 года назад

@@VideoShowMeHow Would it be easier to just disconnect all the wires and just use one rocker switch per wiring harness?

@VideoShowMeHow 3 года назад

@@toddjenest3212 if it has relays that's good, you'd connect the power from relay to lights then the trigger wire to the switch. My other vid shows how to wire a single rocker switch that could help. Sounds like you could then power the while panel with one input? Hard to explain/diagnose via comments sorry mate

@toddjenest3212 3 года назад

@@VideoShowMeHow Thank you!

@gman125 3 года назад

How would you wire in a main on/off LED rocker switch, to control all the other 5 pin rocker ACC switches? Would a simple 3 pin LED rocker switch work? Reason for asking, is my 10 gang marine control Carling switch panel, has Two main LED on/off 6 pin switches, & Eight ACC LED on/off 5 pin switches. Wires are all 10 AWG. The panel is divided in half, with one main 6 blade switch powering 4 ACC switches on each side of the panel (2 mains for 8 ACC). So a 10 gang panel, and all 10 have a 20A circuit breaker inline. Problem is the 6 pin main (2ea) Carling style rocker main power switches have broken. I can't find replacements anywhere! Best I can do is replace both 6 pin switches with ready available 3 or 5 pin switches. The panel was pre-wired (wired just like you show here) when purchased, and the manufacturer is no longer around. Trying to get my head around going from a 6 pin to a 3 or 5 pin. Also, the two main 6 pin switches have 5 hot (+) & 1 earth (-). Top left is +. Top right is -. Both center are +. Both lower are +. Best I can figure is the main 6 pin only need one ground, because it only has one led. Any help here would be massively appreciated!

@brewskisdodge 3 года назад

Thanks mate led lights on my xj

@VideoShowMeHow 3 года назад

Nice 🤘

@zackparrish2751 Год назад

Awesome video! Thanks for sharing but I have a question that may seem stupid to some...Can the dash lights be wired directly to the power coming in as long as everything is key on power? I'm running a 6 switch panel and I believe this should work fine. Or should I just grab another fuse slot from my box specifically for the dash lights? I'd hate to rob a slot for something else I could use and doubt the LEDs in those draw much amperage. Thanks for any insight I appreciate it!

@VideoShowMeHow Год назад

Yeah works prob be ok, just depends on draw etc

@zackparrish2751 Год назад

@VideoShowMeHow thanks I just saw your reply. I'll give it a go 👍

@smallsmoke69 2 года назад

Your a legend! thank you so much 😁

@michaelkoz8 Год назад

Question.I understand this video. But how would I connect blue tooth speaker to a switch. My speakers have three wires coming from them. I’m using the same set up in this video

@collinherold8047 3 года назад

Im terrible with electrical stuff, but if I'm understanding this properly I can run just one wire to the power and I could use that one wire to run the power through the switches and to whatever light bars or accessories i have? Or am I misunderstood?

@VideoShowMeHow 3 года назад

Yep one to power switches etc but using relays for light bar power

@Legend-oy5vx 2 года назад

Do you only need one relay for all the switches if you’re daisychain the switch wire to the relay?

@VideoShowMeHow 2 года назад

You could yes would depend on what you're switching though. You'd likely use seperate in most cases

@GlennFelton-kc5ku 27 дней назад

Are these for led light or can you use this for Bt radio too

@VideoShowMeHow 27 дней назад

@@GlennFelton-kc5ku you could use these to toggle whatever you'd like

@ismaelcasillas808 10 месяцев назад

How do I do it for dedicated circuits I don’t want anything daisy changed bc the stuff I have uses amps so I need separate how would I do that.. all the videos I’ve seen are on the same circuits but I need four different circuits

@rollerpsycho 3 года назад

I’m about to install LEDs on my car using rocker switches, diagrams show a fuse between the power pin wire to the battery. Do i “need” a fuse in that line or can i run from the switch direct to battery like yours?

@VideoShowMeHow 3 года назад

I would add a fuse near the battery on the main 12v wire 👍

@rollerpsycho 3 года назад

@@VideoShowMeHow Awesome, Thank you for the reply, appreciate that.

@USNMU 2 года назад

Do the light bar and pods go to the same relay or is a separate relay required for each?

@VideoShowMeHow 2 года назад

Would be seperate relays

@MrFrodo1111 6 месяцев назад

Question..would the switches take the place of the relays or would one need 7 relays for the seven switches to wire different lights, diesel heaters etc etc? TIA

@VideoShowMeHow 6 месяцев назад

It depends on the draw, if the draw is minimal you could potentially just use the switch, anything more than a few amps and if use a relay