how wheel alignments are done  

Brave guy using a adjustable wrench. Try that in the rust belt lol

I have the utmost respect for people that take pride in their jobs, take their work seriously, and do the job right. Working on someone's tires/brakes means their life is in your hands. And this is a job very well done! Thank you for this video and demonstration.

I just need to buy 6,000 dollars worth of equipment to fix my alignment

I feel like I just watched some sort of game play for a hyper realistic mechanic simulator.

You forgot about the torch, cheater pipe, and banging your knuckles so hard they bleed. At our shop, it's company standard to include those.

Mechanic said I needed 2 engines 🤔

А почему у вас все грани сорваны? А это профессионалы разводными ключами работали

It’s crazy to see what equipment the pros use. I’m still out here with a card board box to do a wheel alignment

Rear can still be adjusted, just takes a pry bar. A really big one.

ПрофессиАнал тяги вывернул шаровая чуть не вылетела ,двумя ключами откручивать надо и не рвать шаровую

I like how your vin label actually has the vehicle info in it. At Land Rover, that upc contains the part number for the decal.

Using adjustable spanners 🔧 tut tut

That's how a toe set is done. Not a complete alignment, but good procedure I've lost count of the techs I've seen do a caster sweep without the pedal depressor in place.

Такой весь профессиональный и с разводными ключами. 😂😂😂

Колеса не подкачал, ходовку не проверил перед регулировкой! Делетант...

Nice!👍 Just wish the shops I've been to wouldn't try and screw people. I had brand new ball joints and was told I needed new ones. Went to another shop and I didn't need anything but a alignment. 🤨

Любители разводных ключей

Grease the tie rods threads next time 😊 great video 🎉🎉

Давление в шинах не проверил...

Check my tire pressure & Make sure steering wheel is centered up! If Steering wheel is offset I'm coming right back in.

My high school had something like that I don't think it was this fancy but it was very similar.

Shit I fixed my alignment in my garage with a couple wrenches. Couldn't be easier

No need to torch the camber and toe bolts???! Lawd this must be heaven

That's not the way its done. Your supposed to take the customers car out for most insane balls out ,drove it like you stole, dukes of hazard insane test drive, recording all the burn outs and high speed jumps , brody's , and red lining the engine so high until the pistons try to punch their way out the sides of the engine , then posting it on you tube as a diagnostic test drive

Давление в шинах не выравнил,а это нужно сделать

Установка денег стоит, а он с разводным ключом.

Ничего отличного, я думаю профессионалы не работают разводными ключами, так как ими нормально не затянуть гайки.

An adjustable wrench can cause the nut head to round.

Check your tire pressures!

а реально , закисшие болты которые только грелкой греть и балгаркой выпиливать .

Разводными ключами... Моё почтение

Узбекла боми 😂😂😂😂😂😂😂😂😂😂😂😂

После таких спецов, наконечники менять приходится.

75 percent of wheel alignments are not needed. Don't get ripped off.

I’m watching this as I get an alignment right now. Lol

вот тоже самое, На моем Урале 4320 сделайте пожалуйста.

I have yet to do an alignment 7 years and still aligned.

Огорчили разводные ключи в конце

Loosening a bolt by stressing the ball joint? really???? I would be upset if it did that to my vehicle...

Technician: “big fucks” 😂

...i low-key wanna work at a place that does this and learn this fo sho! ....lol

That car is definitely not from New York State

I just use 4 jack stands, string and a measuring tape.

Man oh man. I appreciate this video because it further lets me know that the shop I went to ruined some new parts or just didn’t perform the job correctly

Caster lien is the wrong way at least the most positive chamber is on the left that should Compensate for the road Crown Since the casters go in the wrong way Still looks like hes gonna have really bad inside edge wear Oh well hes got a green print out I guess that's what Treadwear warranty R 4

I still use a torch even if there is no rust. Do not like surprises.

Lets talk about the Alignment he did. If you know anything about wheel alignments. that car Caster Cross will cause that car to pull left onto incoming traffic. .5 Caster Cross is the max allowed limit. Overall this car will not drive great and the steering wheel was off center. Ya might Thumbs up. But I would call this the Standard Good enough mindset of most US based Techs.

Wow I can see why it's so expensive to get A-line up because of the technology of the equipment.

*Yeah, looks cool. Until my double wishbone suspension comes in with all adjustable parts then it's "WE can only do factory settings"*

Yes just like that. Reality rust and bent or missing parts makes it much harder in the rust belt

Lol no floor mat.....big ol boot print. Minimum wage with a 5 dollar commission for the labor is how most aligners get paid....which is why they come back set toe let it go...what your camber?? Nah just rotate your tire everyday won't see that camber wear.....cuz the cradle wont shift...on your fiat chargerliger

И только у нас затягивают так, что когда откручиваешь обосраться можно. 😅😅😅

You only adjusted the toe. Alignment includes caster and camber adjustment which you probably don’t even know what that is. ( Those two can make car pull left or right ) New generation tech 😂😂😂😂

Alignment kit looks way more simple and better than some of the ones I've seen

А пыльники не снял и завернул пыльники потом их перетрет и здрасьте будет ища какуойто мелочи

I USE TO DO THIS AT THE AUTO DEALERSHIP, DONT MISS IT.

Where the rust? Where's the stripped nuts? Wheres the PB blaster soaking for 10 mins n 5 minutes of being torching? Wheres the 18 inch wrench you bought JUST to break tie rods free? Is this a dream?

Бллин ето же Треккр 😅😅😅😅😅

That's not an alignment and adjustable spanners really???? Show me a proper 4 wheel and I'll look at it including compressions the suspension to the correct height

Chevrolet Tracker price in my country 30.000$ . This is very expensive 🤣 Uzbekistan , i love you

Why would u use that garbage equipment. You must enjoy doing it over and over again for free because that crap doesn't do it right in the first place

Very modern version of "Toe and go"

Yeah those tie rod nuts aren't going to be tight enough if that's all the wrench you put on them. That shit supposed to be like 60 ft-lbs.

Top

adjustable wrench sign of rookie or sloppy mechanic

That rear solid axle does have adjustment. Just as easy. They make shims to shim the bearing to align it

"No adjustment, solid axle",,, Charges for 4 wheel alignment.....

I’ve seen better. The BMW vid where they weighed the car down and got it perfect was 👌🏻 not sure which shop/vid that was.

If you haven’t used Snapon adjustable wrenches, you need to try them. I thought the same thing. They work quite well!

Omg dont buy any chevrolet in like gm cars in uzbekistan cars are not enoungh strong and monopoly

All you did was set the toe so its (good to go) you didnt adjust anything else, the camber was out by .5° on the right front and the caster was out by .4° on both sides. Granted the toe might be right but the car is still going to scrub the tires going down the road and it will still have a small pull to the right. All it takes it a little bit of extra time to get those adjustments with a better spec. Do the job right or don't do it at all.

Це не професіонал, ключі не професійні. Вдома кран перекривати тільки.

If only they were done this quickly lol.

I didn't see anyone check the tire pressures and front end for loose parts. Before alignment ? Lol

отлично

Don't know if I trust him using crescent wrenches not a very good sign of a professional

Real Techs do not use Adjustable Wrenches. We use the "RIGHT" Wrench

Hi I am also a wheel alignment technician I also do one job.❤

Приятно смотреть на работу професионала

don't forget to reset the steering angle sensor if it has one.

Software UI sucks

Man that amazing I never new that💯👍✨😯

Ooooh. You didnt have the lift at calibration height. Im telling...

Хантер, офигенные стенды. Уже 15 лет такими пользуюсь

Some of those arrows are not centered in the middle

Плохой мастер. Сначало осматривается ходовая может там смысла нет в регулировки колес а с клиента деньги возьмете за просто так плюс потом еще и переделаете по гарантии через час, дальше если всё в ходовой хорошо то выравнивается давление одинаковое во всех колёсах, дальше срываются контрирующие гайки двумя ключами держа за наконечник чтоб шарувую не мучить или не вырвать , открутив прокрутить тягу на 360 чтоб исключить что она не гнута и гайку немного подтянуть . Ну а дальше всё верно прокатка, кастер и сама регулировка.

I don't get why they don't get the front camber even. I always got my civic perfectly even and it drove great when I worked at a shop.

Wow, I didn't know an alignment only took a couple of seconds!!! My shop takes much longer than that!!!! I need to take my car there!!!🤣🤣🤣🤣 An oil change even took longer!!!!

Wrong solid axels can be adjusted with liners.

Can of NOS by computer is a necessity nobody mentions.

Fuck it, I'm gonna go ahead and learn the damn thing. I've just been too lazy but I think im ready now. 🦆

Alignment is my most hated job ever, cannot stand alignment! I don’t know if it’s the equipment I’m using doesn’t help or I just can’t seem to crack it. But whenever the car comes off the ramp and out for a test run the wheel is never straight. Even though it was clamped in the straight position at the start. I’m using Supertracker 2 wheel alignment, analogue gauges

I shall find you buglucks12345

No adjustments for rear wheels?! And cambers and casters?

That’s all and they charge you like 100 bucks

Impressive

will u do min for $20.00 it only takes a min lol 😆😆😆😆

That’s what they want to charge me 100$ for……………

Пыльник шаровой опоры порван - шаровая опора на замену. Развал/схождение не регулируется на неисправном авто!

Откуда сантехнические ключи?