Love all of your videos - thanks so much for sharing. Looking at heat presses for days - finally decided upon this one after looking at a couple of your videos. Beautiful granddaughter- so adorable! Thanks again. ❤
If anyone runs Into a similar issue, if you take off the back cover, check the connection of the green connector, mine came completely disconnected and once I plugged it up it worked fine after
Great video. Just a thought, you might want to move your cord to around the back of your press. You had it going around the front of the neck of the press close to the heat source.
I'm about to pull the trigger on this particular heat press....your video is SO helpful in the decision making! it's great to actually seethe press in action...do you possibly have links to the supplies, like the type of paper you need to print the image on to heat press it onto the shirt? thank you for such a wonderful, thorough walk through! :)
Here are a couple of example videos with supplies in the description: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hZ1bWYlGfRo.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Gf1JUDErNgw.html
Have you done screen print transfers on 100% cotton t shirts? If so, what temp, for how long and what pressure? I’m having a very hard time finding the right setting for this.
My HPN 15x15 slide out drawer doesn’t slide all the way in. Have you had had this problem? Mines is brand new. It also constantly beep when I’m trying to set up temp and duration. I pressed the ok button and nothing happens.
Can’t find the hardware to attach the secondary handle. Do you know what size hex screws and washers I need to attach the handle? Is there any other pieces I need besides the handle, screws and washers? Thanks!
For 8-1/2 x 10 and 8-1/2 x 14, I use an Epson 2720 with Hiipoo ink. For 11 x 17 and 13 x 19, I use a Sawgrass SG1000 with the bypass, and with Sawgrass ink ($$$$)