No video :(

Hybrid Tama ClubJam drumkit with Yamaha EAD10 & Agean R low noise cymbals

Подписаться 62 тыс.

Просмотров 31 тыс.

50% 1

www.drum-tec.c...
👉 Today we've equipped the Tama Club Jam drumkit with drum-tec pro mesh heads, Yamaha DT50S snare/tom triggers, EAD bass drum sensor & EAD10 sound module once again, and use the beautiful Agean R low noise cymbals for an electroacoustic hybrid drum setup 🥁🎧⚡️
The drum-tec pro mesh heads are not the most silent mesh option available, but they give a nice kind of "sound" to the snare & toms especially, for more "real drum" feel while practicing.
There are no additional mics active in the mix, all sounds are coming out of the EAD10 sound module. The bass drum sensor works as a stereo microphone & kick trigger at the same time!
🔥 Need help finding the right kit? Talk to us and we'll help you: drumt.ec/kit-f... 🔥
Please comment or ask any question you might have. You can also get in touch with our service team directly through experts@drum-tec.de
Video shot @ drum-tec West / Spytunes Recording Studio, Mainz.
Drumming & production by www.ralfschumacher.eu, follow Ralf on‪@digitaldrumming‬
#tamadrums #edrums #drumtec

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@essenter4222 2 года назад

In my opinion, the EAD10 is just like one of best things that 'happened to' hybrid sets. It's just amazing!

@xPoisonDashx 2 года назад

The cymbals are something else but the hush hush series combines the best of both worlds

@nostalgicznyperkusista 6 месяцев назад

Your playing is wonderful. Thanks to you, I just bought the Tama Club Jam set. Thank you, you are doing a great job!

@GivenKDW 2 года назад

These cymbals are just 😍

@pocketdweller3771 9 месяцев назад

Omg those cymbals 😍😍. I’ve me r heard of them into this video so thank you. I’m experimenting with something similar

@maxdrums3165 2 года назад

Поставил лайк, спасибо за видео. Раньше себе хотел так же собирать комплект (Тама уже есть). Но ещё раз внимательно послушал. И мнение - всё совсем неоднозначно. Сильный звук малого барабана - без вариаций, торчит, как "гвоздь", не варьируется. Из-за этого и одинаковая атака и "пулемётность". "Призрачные ноты" прослушиваются только в заполнениях, а не в основном рисунке (ритме, партии) , там они почему-то "затираются". Вообщем - убедили, буду пользоваться и дальше старым добрым Тд30 и ТМ2)

@williamperri3437 2 года назад

Interesting for sure!

@roytinez 2 года назад

Excellent comme à chaque fois, merci

@drumtecTV 2 года назад

Merci Roy!

@BenWaxman80 2 года назад

Do the Triggers pick up rim shots and cross sticking?

@pietro-viecelli 2 года назад

I wonder how does that kit perform in a live scenario.. with guitars, bass and vocals all together.. Been eyeing those cymbals for a while and this kit size would be ideal for portability!!

@drumtecTV 2 года назад

Hey Pietro, you can combine Agean low noise cymbals with any acoustic / half acoustic setup and either mic them up with a pair of overhead mics or use something like the Yamaha EAD10 & bass drum sensor (which works as a stereo mic & kick trigger actually). Please don't hesitate to get in touch through experts@drum-tec.de for further assistance if you like. Kind regards!

@dancro Год назад

@@drumtecTV what triggers did you use? Mainly for the bass. 2box kick couldn't fit with the tama hoop. Tnx!

@drumtecTV Год назад

@@dancro It's the Yamaha EAD kick sensor, you can see all the gear used in the intro of the video I think. Kind regards!

@lucasdewitartist7406 Год назад

Thank you Drumtec for this lovely demo! If I understand correctly, the kick trigger of the EAD10 does not trigger mesh heads. How did you get it to trigger the kick drum with the mesh head? Also, did you use the built in sounds of the EAD10? And if yes, what dit you use because it sounded quite pleasant and natural.

@muzykawpracy2086 2 месяца назад

Hi, I'm using 18x12 bass drum of Club Jam with standard head, set of mapex toms (8,10 ,12, 14) with two-ply mesh heads and Zildjian L80. This is very balanced set. Mesh head od this bass drum is way too quiet and reacts strange.

@chickensrunekirchner8195 2 года назад

it would be great to see the jazz/natural and rock/normal r series symbols played in one video to hear the difference.

@drumtecTV 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BdkTkA_GKa4.html Kind regards!

@chickensrunekirchner8195 2 года назад

@@drumtecTV Thanks this is exactly what i’ve been looking for!

@THEDRUMMER3779 2 года назад

Hey Ralf, is that rim rubber by pintech? Or does drumtec have their own? Was looking for this kind of setup where the side mounted triggers go right on the rubber.

@drumtecTV 2 года назад

These are the drum-tec RimNoise Eliminators, that you'll find over here: www.drum-tec.com/rimnoise-eliminator-pro Kind regards!

@olimarghe Год назад

What are the advantages and disadvantages of a hybrid vs a full electronic set? Any inputs and / or links would be very helpful. Thanks!

@drumtecTV Год назад

Hybrid will be louder :) yet acoustic low noise cymbals will offer a different playing feel & offer nuances (like striking in various areas) that an electronic cymbal won't have. Yet, sound fleixibility is also much bigger with the electronic cymbals. You can find a noise level comparison as well as several sound demos of various low volume cymbals here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0sa10UImETM.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7Z4cdK-1Wuk.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BdkTkA_GKa4.html Feel free to get in touch through experts@drum-tec.de for further assistance if you like. Kind regards!

@lycanthropy88 5 месяцев назад

I see that you use mesh heads. Do you need the triggers because of that ? If there are no triggers it sounds worse with mesh heads compared to regular drumheads? Thanks !

@joseaguilar6804 4 месяца назад

Have you ever use your own triggers on the EAD10 module?

@burakbakirci5505 2 года назад

It is great. I am thinking to turn into my clubjam fully with yamaha ead by using silent drum head is that possible? And also how did you record the cymbals with ead triggers? Should I buy overhead mics. for cymbals or the mic on the kick can take the cymbals?

@drumtecTV 2 года назад

Hey Burak, please get in touch through experts@drum-tec.de for further advice on the kit setup if you like. The intro passage of the video shows the overhead sound of the kit, while the groove/performance passages were recorded staright from the EAD module (Stereo out). The kick sensor works as a stereo mic & a bd trigger at the same time, so in this setup you wouldn't need any additional microphones. Kind regards!

@FadjarMoeljarto 2 года назад

Good..

@laurdessvalentino5849 Год назад

Jesus he is great

@drumtecTV Год назад

Thank you very much Laurdess! You can find more drumming / music & sound demo videos on my private channel digitaldrumming too if you like: www.youtube.com/@digitaldrumming Kind regards!

@actuallylevi Год назад

This sounds so good 👀 Would this be low enough for apartment use?

@drumtecTV Год назад

Hi Levi, you can find a noise level comparison of low volume cymbals & e-cymbals over here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0sa10UImETM.html I guess it depends on your appartment/neighbours in the end, kind regards!

@actuallylevi Год назад

@@drumtecTV Thanks a lot for that!

@faisalrahman3671 Год назад

Did you put mesh head on the Bass Drum also? Or just the snare and toms?

@pjdrummer1984 7 месяцев назад

How did you get the EAD 10 trigger to work on a mesh head? I can’t get mine to work unless I change the settings to fix curve and with my Tom being mounted on my bass, drum and triggers to kick as well.

@robertbagley403 Год назад

Anyone have recommended trigger setting using EAD firmware 2.0 and the low volume kits? Seems that the trigger settings have less adjustment options than ver 1.0

@christchanbuentiempo1981 3 месяца назад

Did you use trigger for cymbals?

@niltonnaraharidrums7950 Год назад

donde pusiste los gatillos yamaha? ¿Hay una opción para 3 carretes? Aparte de la caja?

@drumtecTV Год назад

Hi Nilton, please get in touch through experts@drum-tec.de directly regarding your question. Kind regards!

Год назад

Is this a configuration you sell?

@drumtecTV Год назад

Hey David, sure :) www.drum-tec.com/hybrid-drums/hybrid-sets Feel free to get in touch through experts@drum-tec.de for further assistance, you can basically get any custom kit configuration from drum-tec. Kind regards!