I Broke My Supercharged 1967 Chevy C10 On the Way to Cletus' Bristol 1000 Race!

Подписаться 934 тыс.

Просмотров 325 тыс.

50% 1

Episode 259 of Mike Finnegan's Garage was so fun to make! Joe Cole and I prepped my Chevy truck for a road trip to Cletus McFarland's Bristol 1000 oval track race at Bristol Motor Speedway. The we road tripped the C10 and my Cummins-Swapped '73 Chevy Squarebody to the race. Of course the trip did not go smoothly but the race did. I ended up beating 23 other drivers and finished in 8th Place. Not a bad result for a dude with very little wheel-to-wheel racing experience. Hope you enjoy this video and please tell your friends about it.
If you'd like more info on that front rollpan we installed in this video then go here: www.holley.com/products/exter...
If you'd like to support this channel then please buy one of our new shirts here: www.fsmgarage.com
Thanks!
-Finnegan

Авто/Мото

Опубликовано:

9 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 619

@SonicTheR32 10 месяцев назад

To have the Grave Digger himself respect you like that...holy crap, man. That's badass

@chestercallahan8856 10 месяцев назад

Dennis is such a humble man, a genuine legend! Down to earth good ole boy.

@wijibo6772 10 месяцев назад

The fact Steve walked away from that wreck with nothing more than a little soreness from the seatbelts is a testament to how much the Cletus crew is taking safety.

@gcrauwels941 10 месяцев назад

Tye and the crew are killing it.

@M3PH11 10 месяцев назад

@@gcrauwels941 finally. took a couple of near death experiences for them to wake up

@alexhathcock1380 10 месяцев назад

@ClickOnProfile725I call BS!

@ashleyrankin2456 10 месяцев назад

Mate, you live every gear heads dream life

@jeffleary1598 10 месяцев назад

Mate, I’d be happy if someone just called me mate😂

@andrewmeadows2596 10 месяцев назад

What breaking down all the time unless it's what someone else built.

@ashleyrankin2456 10 месяцев назад

@@andrewmeadows2596 that's part of the passion.... build, break, repeat!

@inmate666 10 месяцев назад

I'd give my left nut to have clutch problems like that in a nice truck.

@Hillsautomotive 10 месяцев назад

@@andrewmeadows2596I’m even more pissed when someone else built it and it breaks.

@benjaminatkins4720 10 месяцев назад

Absolute ripper of an Ep! Enjoyed the interview with Dennis Anderson. Two Absolute legends on motorsport entertainment right there!

@twisted2291 10 месяцев назад

Cleetus has taken every RU-vidr that becomes a part of his race, and just skyrockets them. He has done so much for motorsports, and help to boost many great careers for people that it is insane. The Bristol 1000 is becoming the Superbowl of RU-vid. The access to the behind the scenes is great, and to see each youtubers prospective makes it even more enjoyable. I always look forward to seeing this race now. Hope it keeps going for a long time.

@Mr_Denuto 10 месяцев назад

And yet had to move content to his own platform for streams due to RU-vid!

@mikescherrer4923 10 месяцев назад

@@Mr_DenutoI feel like that move was more about creative control, he wanted a TV style presentation with multiple cameras and YT live doesn't have the tools he needed.

@BariLopesh 10 месяцев назад

What are you waffling about, Mike had a plenty successful career before meeting Cleetus... Mike worked hard to get where he is, to say Cleetus blew him up is a big mistake...Mike was doing cool stuff when Cleetus was a twitch in his dads nut sack...

@Mr_Denuto 10 месяцев назад

@@mikescherrer4923 I'd say that's a perk. RU-vid would take a fair slice of the stream pie. Now he has 100" of the pie and has ironed out the kinks. The streaming subscription would fund these events with change without looking on YT earnings

@alexmikhael5061 10 месяцев назад

this is what we ARE ALL SPOOSED TO DO!!! *HELP EACH OTHER SO WE ALL CAN BE WINNERS!~!!!!!* WE ALL CAN BE WINNERS !!! maybe not first on the PODIUM BUT FIRST IN LINE FOR THE FUN !! :) TAKE THE *M* FROM *ME* AND TURN IT UPSIDE DOWN TO A *W* FOR *WE* AND *WE* TOGETHER WILL MAKE THE WHOLE BETTER!!!! DO GOOD & BE GOOD and MAKE THE WHOLE BETTER WHILE DOING BOTH!!!!!!! THERE IS ENUF ROOM FOR IS ALL TO *DO GOOD* ELEVATE not escalate !!! the ONLY thing that should be BANNED IS THE HATE !!!!!!! (well and stupidity but that is my own pet peeve! LOL sigh I STAND ON THE *BAN THE HATE!!!* one tho!!)

@BettysGarage 10 месяцев назад

Love the look of satisfaction on Finn’s face when he gives it the beans after fixing the clutch!

@cyclicm1622 10 месяцев назад

In your bell housing also add a drain hole on the bottom so any leaky fluids can get out without having to loosen bolts. Plus it will give you an indicator of a problem BEFORE the clutch bathes in fluids.

@kawasakikx8093 10 месяцев назад

Only issue is there’s so much air moving around from that clutch spinning it would cost the clutch before you see a drip anyway

@markjackson6288 10 месяцев назад

Motorcyclist won't like you

@marauding4life 10 месяцев назад

The struggle is real with hot rodding!! So glad you show issues as they pop up and don’t sugar coat reality..

@Voltronforce1982 10 месяцев назад

The part where the wreck happened in front of Finn was the scene in Days of Thunder when Cole had to drive through the smoke to win. Awesome driving.

@craz33ivan93 10 месяцев назад

Watching your channel takes me back to Saturday mornings watching Gears, truck shows, hot rods and racing. Gear heads know the shows.

@djk91lx28 10 месяцев назад

I love Demo Matt’s idea of the 3 wheel motion burnout and how everybody has shown it on their channel. 🤘🏼🤘🏼

@alvinpowell6189 10 месяцев назад

I put Mike Finnegan next to Dennis Anderson as the same kind of people!! You guys are so entertaining, down to earth and just plain fun!!!

@Hotlog69 10 месяцев назад

I don't care about NASCAR but the Cletus' Bristol 1000 is amazing. I love everything about it.

@UncleManuel 10 месяцев назад

Watching Mike and Gravedigger Sr. fanboying each other was just so funny to watch... 😁😁😁

@commonsense7754 10 месяцев назад

Man Cleet threw down in toast! Wow. I'm actually impressed. Well done from down under (home of the burnout)

@dieterlange7581 10 месяцев назад

Best video in quite a while good old Finnegan style roadkill style👍🇺🇸🍺🤣

@Chris_Mc. 10 месяцев назад

3:03 I'd say transport guy had some fun with your truck.

@philbert006 10 месяцев назад

I'd say you missed the last couple videos on this truck then. 😂 Mr Finnegan needs absolutely no help destroying clutches. In fact, he needs someone to help him stop destroying them, because every third or fourth episode is about him destroying a clutch on one vehicle or another 🤣 it kills me, at 5 minutes sharp you can see the transmission blowing fluid from where the lines go in when they started it up. I thought immediately the remote bleeder line he has on there. Turns out the line from the master in pretty much the same spot. What I can't figure is how they missed it, with video evidence, and days in advance of the trip. A punch in the crotch for sure

@peterplouf2836 10 месяцев назад

Never met a hydraulic throwout bearing that failed to fail.

@oambrosia 10 месяцев назад

Better off with a fork and external cylinder :)

@PiDsPagePrototypes 10 месяцев назад

@@oambrosiaImpecable Logic. Y'know the thing that ruins logic and reliability, is a bean counter saving money.

@0hjaa3.06 10 месяцев назад

@@oambrosiaEven better with just a cable operated clutch

@scottburrow8717 10 месяцев назад

My kind of video that I knew you could get back too. Nice job guys!! Keep these kind of videos coming.

@Dtrent81892 10 месяцев назад

Quick tip mike, drill an 1/8 or smaller pilot prior to using the rotobroach. The pilot size is 1/8” on the tool. Typically i drill slightly under 1/8 to prevent the bit from walking any in the event your 1/8” bit egged the hole. Tricks of the trade 👍🏼

@Mattvardaman 9 месяцев назад

The editing on your videos is next level now! Major props to the person you have handling that now.

@BackyardClunkers77 10 месяцев назад

Those Blair tools "mini hole saw bits" are intended for drilling out factory spot welds. The center point is spring loaded for helping with centering, while the purpose of the hole-saw looking outter circumference is meant to cut just the outter thin layer of a factory welded sheet metal separating it from the underneath layer & in theory leaving the bottom sheet metal layer uncut.

@SonicTheR32 10 месяцев назад

This makes working on a Sunday just a little more bearable...

@nickhale117 10 месяцев назад

This does? Double time makes it more bearable for me lol.

@SonicTheR32 10 месяцев назад

@@nickhale117 double time just means more for Uncle Sam lol

@quickdeuce 10 месяцев назад

Wow! The one, the only, the MOST LEGENDARY MONSTER TRUCK DRIVER EVER,, Mr. Dennis Anderson. Anyone who knows monster trucks surely LOVE what Dennis Anderson did for monster truck racing. He set the bar of fantastic only a very few have been able to find. So cool!

@quickdeuce 10 месяцев назад

Qualified #19 is good,, put him near mid pack no matter what they did with the starting positions. @1:07:24,, I've not seen anyone make this comment yet,, CUDO'S TO THE PILOT OF THAT DRONE! He/she got some AWESOME footage with that drone!

@kaygenotte3991 10 месяцев назад

I love these long videos, helps my Sunday morning chores!! Rock on!!!

@wbball15 10 месяцев назад

Awesome stuff, Mike! Great conversation with Dennis. #FinneganSpeedAndMarine

@thecheese302 10 месяцев назад

i love this stuff. Kevin smith is too good.

@divinajewels4659 10 месяцев назад

I was there 🙏🙌👏 Thank you for making my trip worth wild I can't belive Mike remembered me from last years race! I am going to print and frame our picture together when I get home! ❤❤❤

@quickdeuce 10 месяцев назад

Absolutely adore the sounds that come from the C10. The exhaust note, the sounds the trans make (clunk), the absolutely sweet sounds the engine makes thanks to that close ratio trans. It is one SWEET hotrod!

@morganleblanc730 10 месяцев назад

As far as the throw out bearing. On myShelby Cobra I kept it simple and used a slave cylinder that is on the exterior of the bell housing. I am not a fan of a hydraulic line going inside a bell housing but that is me. Love the real world problems solving and overall content Mike. Glad you have an assistant.

@araybeezy1653 10 месяцев назад

these style are supposed to be better but they seem like a major headache

@morganleblanc730 10 месяцев назад

@@araybeezy1653 well Mike has shown what a headache they really are. Yes you don’t have to deal with a mechanical arm but I see no other benefits of a hydraulic clutch throw out bearing. Just more stuff to go wrong. I designed my setup and it works and has been trouble free. That includes racing the Cobra.

@lasskinn474 10 месяцев назад

@@morganleblanc730 well technically there's less stuff to go wrong. only it's more of a hassle when it does and likely more probable to go wrong.

@philbert006 10 месяцев назад

@@morganleblanc730good on you. Toyota figured it out 50 or so years ago. And Honda used mechanical/cable operated clutches forever. At 300k miles or so, you might have to take up some slack because the cable stretched, and it's possible though unlikely to break one. But super quick and easy to replace. Go back to 5 minutes exactly in the video, and you can see the thing blow fluid when they started it. Way back before all the incorrect repairs. I immediately said to my cat look at that, bet that remote bleeder or the line from the master is the problem. Could have saved them every bit of trouble related to it had they noticed that. What a punch in the crotch

@c0wb0yTV 10 месяцев назад

i love your c-10 and thank you for making cool videos for us to watch!

@tazbertdt 10 месяцев назад

Dennis Anderson seems a top bloke. Was a riot on the Faster with Finnegan episode and seen him on a couple other things where he's just the nicest man to whoever he meets.

@waitemc 10 месяцев назад

As a 44 yo dude Dennis Anderson is the most insane monster truck driver-engineer hands down the Legend. Not to mention the son hes stepped up and filled the shoes even better as all us real Dads wish and hope our offspring do.

@philbert006 10 месяцев назад

Wait, are you 44? Or talking about Ryan, his son that drives the truck now? Cause Dennis is in his 60s.

@Huxley2022 10 месяцев назад

This was pure gold. It was a pleasure meeting you at LS Fest and thanks so much for letting me check your c10 out!

@stevesidelinger2820 10 месяцев назад

Finnegan in his happy place. Always nice to see!

@christophergarza4340 10 месяцев назад

Loved the Elwood Blues reference. Make Jake happy and fix the cigarette lighter 😂😂😂

@keithbailey540 10 месяцев назад

Yes, we need the video of Dennis driving your kids around in a monster truck!

@wootownwakefest8597 10 месяцев назад

Livin the Dream!!! You are this generations Denis Anderson…Keep doin what you do!!!!

@earlrichardson385 10 месяцев назад

A high horsepower vehicle breaking down on a road trip. Where have I seen that before?😉

@fatman123526 10 месяцев назад

"We're gonna be late" is just the Roadkill unofficial motto 😂

@CrashBandit514 10 месяцев назад

This video is very timely. You just convinced me to go with an external slave instead of the hydraulic throwout bearing lol.

@michaelh370 8 месяцев назад

Bringing racing back to the people, love it.

@yungkidnf 10 месяцев назад

Fun can't even begin to explain what that entire event seemed like. Even with the truck problems it looked like an absolute blast!

@kotajames6211 10 месяцев назад

"i would drive it till theres smoke coming out the back" and THAT is why i like GraveDigger! He would launch it off these insane jumps! Ive seen him donuts and axis spins with only 3 wheels and it be smoking out the back n everything! I love it! Keep giving her hell!

@brentfletcher3359 9 месяцев назад

The monster the C10 is, but I love the Roadkill ramp truck even more. Mike rotisserie restored the truck ti be his dream, and then slapped the ROADKILL sticker on the side because that’s where it came from and that’s who he is and it’s awesome. How many beer drinking nights have been spent dreaming of what him and Frieburger do for fun/work? As he always says “ I love my job”. Congrats man.

@jwv81 10 месяцев назад

Its always neat to me seeing you guys just up the road from where i live. Hope to see you at drag week up there on the 20th.

@vannymanwon1876 10 месяцев назад

Excellent job on filming the burnout pit. Hardly anyone gets them from the stands and it's really the best viewing.

@dustinwright7910 10 месяцев назад

Dennis Anderson. The legend!!! Awesome sauce. Another GraveDigger fan here

@gcrauwels941 10 месяцев назад

Anderson is such a cool guy. My favorite truck has always been the Grave Digger. Tye and the FF team really upped their game with the car safety. 43:00 you could see the hose up against the clutch. Congrats on eighth place!!

@philbert006 10 месяцев назад

You can watch it blow fluid at 5 minutes flat, and then watch them never figure it out. It'll be painful when he reads one of these comments or finds that little juicy bit of footage that could have saved all the trouble way back in the beginning.

@rustyknutz81 5 месяцев назад

Great video.not just your step by step explanation but the way you handle the situation. You are a good person and that's rare.

@JamesDunkle 9 месяцев назад

Glad to see you have someone in your corner to help you out with everything. You really need it. Welcome to the team ( hope you are ready) . Lmao 😂🤙

@BUILTFORDTOUGH79 10 месяцев назад

The interview with Dennis Anderson was cool!!!….. still a Bigfoot fan though 😂

@tobyaman8725 10 месяцев назад

Your hired hand is a genius😂

@radders50 10 месяцев назад

Lenco required 😎

@SirensC3 10 месяцев назад

God no! Oil leaking piles. That is old technology.

@andybobandy641 10 месяцев назад

Step drill for the win. Chuck those other things to the back of the toolbox!

@user-gm9xu1ok9z 10 месяцев назад

you do excellent videos.....especially the road trips!

@yakirgr 10 месяцев назад

What a fun video!!! MORE!!! Let's get a vacation at the Andersons' video!!!

@georgem.6136 10 месяцев назад

The C10 is so sick!

@JacksCreekNA 10 месяцев назад

Why not go to a slave cylinder setup to actuate the clutch fork and use a conventional throw out bearing? That way none of the fittings are inside the bell housing.

@MrMuddman01 10 месяцев назад

I got to meet you at LS Fest on Friday. Thank you for the shirts and taking the time to talk.

@chrono1924 10 месяцев назад

the ramptruck is always a win

@gerhelwinters1967 10 месяцев назад

I'm jellies, I've raced bombers & street stocks on Quarter & half mile tracks for A long time, but never some place like Bristol! That looked like a lot of fun. I'm old & banged up now!

@T-bone1950 10 месяцев назад

Diagnosing that clutch problem seemed close to genius to me. Installing that front roll pan seemed close to ROADKILL to me. 😊

@600wheel 10 месяцев назад

Time to put a drain plug in the bottom of that bell housing😂

@brianpenland973 10 месяцев назад

AWESOME RACE DUDE!!!!

@terminalpsychosis8022 10 месяцев назад

Good job spotting that problem... clutch over-travel. Amazing what just a small oversight can cause. Like return hydraulic lines touching rotating disks... Very sad, but good opportunity for a better design. Looking forward to see what this monster can really do, when it's working properly. That'll be satisfying.

@jamesburba1995 10 месяцев назад

You just made my day again Mike ! Sunday mornings with you, and Sunday afternoons with Seahawks football, a steak, and some Rum and Coke. It just don't get much better for me !!! To quote Creedence Clearwater Revival, "Keep on Chooglin".

@fukemallgarage 10 месяцев назад

Would you like to make a wager on next week's game, lions v Seahawks. Maybe a FSM shirt.

@DJgamer-sq5fq 6 месяцев назад

I love watching corn cob in the background of Mat from demolition ranch doing a 3 wheeled donut in his lowrider

@TeamCarcaine 10 месяцев назад

Your track record of keeping cars in a functional state is sub optimal 😂😂😂

@michaelwynne4346 10 месяцев назад

Great job Mike not only finished 8 but finished safely.

@JohnRoberts71 10 месяцев назад

Great race. Great driving. Looking forward to seeing you in the next race

@SB-vb8ch 10 месяцев назад

That's common on those release bearings, gone back to stock before as they are so touchy.

@adamortega69 10 месяцев назад

That was a better video brother. A lot better than an hour trying to make a support bar for the caddi

@jonnewton5929 10 месяцев назад

Great episode Mike. Pure entertainment. Cheers

@dmcdannnell3069 10 месяцев назад

I used to think, wow, must be nice.. he always has the top of the line stuff in all his builds. Turns out he has more problems and works on his junk way more than I do.. 😅

@bobbyborba6460 10 месяцев назад

My Sunday morning video!!!!

@somecallmejoe 10 месяцев назад

That looks like so much fun.

@fasteddie7273 10 месяцев назад

By far the ultimate man cave, I live through you, GOD Bless.

@kevineagleplume1500 9 месяцев назад

I love watching you do what I wanted to do. Keep it up

@kerryevans7413 10 месяцев назад

Great job Mike Finishing the race 8th is better than DNF

@brandaneakright6082 10 месяцев назад

Killer video and great job in the race, keep up the great work.

@alcyr5655 10 месяцев назад

Denise Anderson!!! Not just a quick hello. But takes the time to chat, he's a classy man.

@johndevries8536 10 месяцев назад

How cool is that... Dennis Andersen putting you on a pedestal!! Thanks for your videos!

@tonyb3307 10 месяцев назад

I mean how many of us 70's/80's kids got in to Motor Sport because of Bigfoot and Grave Digger. Seeing Finnegan talk to Dennis and smile is so awesome. Makes me feel ok knowing that I am not the only one that got the bug from Monster Trucks.

@rowdyrooster7332 10 месяцев назад

That jerky was really good thanks for sharing

@FormulaZR 7 месяцев назад

I think Dennis Anderson saying he's YOUR fan might be about the highest award anyone can earn.

@terrydavis7389 10 месяцев назад

looked like an amazing weekend of fun.

@Ryan-nt2py 10 месяцев назад

The song that was played while you were working on the sheet metal is awesome. You guys always pick epic music to go with these videos.

@W.H.Slater-49Fordlightning 10 месяцев назад

Finn, I think we need a list of the places that you're banned from because of non sanction burn outs🤣🤣 I always use a pilot hole with Roto broach

@quickdeuce 10 месяцев назад

Re; burn out competition.. I'm with you Mike,, not at all into it,, doing a burn out at the track is a necessity,, building a high hp motor just to spin the tires doesn't at all impress nor "blow my skirt up" as in "whatever blows yer skirt up" as my 'ol Dad used to say.. Anyway, hearing that blower surge from Toast and BumbleBee's blown engines,, now THAT BLOWS MY SKIRT UP! 🙂