NOT GOOD! MY CHEVY C10 DOES SIXTH GEAR, 200 MPH BURNOUTS AND GOES HOME ON A TRAILER!

Подписаться 933 тыс.

Просмотров 899 тыс.

50% 1

In Episode 230 of Mike Finnegan's Garage, I venture to Bowling Green, Kentucky, the Home Of Holley and Jessie's Garage, a local shop with a sweet chassis dyno. Jessie was kind enough to allow us to strap my 1967 Chevrolet C10 to the dyno to finally finishing tuning the Terminator X EFI system. The end result was unleashing an additional 200 hp from the Chevrolet Performance LT4 supercharged engine and doing epic burnouts in every gear of the six-speed sequential gearbox.
Want more info on the Holley Terminator X efi system? Go here:www.holley.com/products/fuel_...
Want to see the 6xd Billet Sequential transmission? Go here: 6xdgearbox.com
Those Mickey Thompson Street Comp tires can be found here: www.mickeythompsontires.com/s...
The C10 runs Forgeline wheels: forgeline.com
Jessie's Garage: / jessiesautogarage
Holley
Thanks to Jeremy Stoermer, Steve Sparkman and Tyler Pleban for helping to film this episode.
Want to grab the new "I Love Fossil Fuels" hoodie? You'l find it and a bunch other cool swag at www.fsmgarage.com
As always, thanks for the support!
-Finnegan

Авто/Мото

Опубликовано:

28 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 952

@seanlinne8383 Год назад

Sounds like it`s time for another muscle truck shootout! Finnegan vs. Freiburger vs. Costa vs. Dulcich

@stevenichlson6085 Год назад

Yes, make this possible 👏 people. Like the comment.

@jammerz63 Год назад

Don't forget tony Angelo and vice grip garage.

@jameseastwood4984 Год назад

Bring Tony Angelo in 👍👍👍

@katherinecurtis1747 Год назад

@@jameseastwood4984 they cant he left and went to hagerty

@jamesnelson5741 Год назад

Hell yeah!

@destructionnl8165 Год назад

Finnegan: Has 2 ramptrucks. Also Finnegan: Puts the C10 on a trailer.

@Crafftyyy Год назад

too low to get on the ramp trucks

@WillyG3234 Год назад

@@Crafftyyy it lifts up

@getchasome6230 Год назад

@Crappyyyyy Wat?

@michaelcouey1383 Год назад

@@848evo4 LOL I'd love to see what you have that puts all their stuff to shame. I don't see any videos on your page?

@earnestbass1232 Год назад

@@848evo4 half ass but not garbage they have very nice equipment just thrown together. I agree I wouldn’t let most of these guys work on my junk but Steve brule.

@enginebae3471 Год назад

Ahhh, the sound of my people

@J.C... Год назад

Straight up! 🤣👌

@brandonsearle990 Год назад

Hell yeah brother

@BUILTFORDTOUGH79 Год назад

🇺🇸🚳

@studbolt5627 Год назад

Hell yes

@benjones3329 Год назад

Great to see you and Newbern spending some time together, glad he could make it

@joefries365 Год назад

is newbern not on the channel anymore?

@djd1162 Год назад

I felt the same. You never know what happens behind the scenes and it’s good to see their friendship is still there.

@danmyers9372 Год назад

@@joefries365 - No, he left to run his own RU-vid deal.

@Peron1-MC Год назад

@@danmyers9372 and more importantly be with his family more.

@isaaccan3155 Год назад

They still do Faster with Finnigan together. Dave just was working way too much and couldn’t be with mike all the time. The man has a family too. All of these guys, including Freiburger work their asses off doing multiple tv shows. Filming almost every week.

@rowdysincoherentrambling1426 Год назад

Being a fan of Finnegan’s builds is brutal. You see an awesome project come in, but you know he’ll throw 10 others in the mix and you have to wait a couple years for them to be finished. But it’s always worth it!

@JRube123 Год назад

kinda like @doitwithdan

@la_plata3588 Год назад

The recipe to keep you coming back.

@trumbley22 Год назад

Literally every popular car RU-vid channel. It's called automotive ADD.

@trashbandit2449 Год назад

@@trumbley22 this is a 6+ year old build though haha. Not a ton done to it for a while

@trumbley22 Год назад

@@trashbandit2449 So he's a normal car guy? Haha.

@leoreid5649 Год назад

Great to see you and David together for shenanigans again.

@thopf3590 Год назад

That was awesome to see 6 th gear burnouts. Dave’s bel air sounds rowdy.

@Alwhite1929 Год назад

Damn, that first pull after the initial adjustments was night & day difference. Awesome

@RoB_666_ Год назад

I absolutely love the fact that David isn't scared to lay the boot in and whip it when most wouldn't, much respect from 🇦🇺

@peterrobins3708 Год назад

That truck would be illegal in all states of Australia. Fun & personal enjoyment was outlawed a long long time ago. In Australia, those that have big non stop smiles, they're probably auto-outlaws Great videos to watch as usual. Keep on keeping Mr F and other Americans like him 🙂

@al9030 Год назад

I wish I had connections and sponsors like Finn..Life would be good

@brianlafollette7530 Год назад

It is good to have friends that know things. Nice job Holly

@greghayward4815 Год назад

Thanks for introducing all of us to this drag strip. I have gone out of my way a few time to visit this strip. Wish there were more like this around the country.

@BrettGuffey Год назад

Such great sunday morning content. Love watchin Finnegans garage with a cup of coffee

@gteefxr3094 Год назад

It's better with a couple of shots and a beer.

@CamaroStuff Год назад

Damn! Mike, talk about an episode having you on the edge of your seat. Absolutely Epic!

@Buffrt66 Год назад

Crazy!!!! I love seeing all this new tech. being worked with and adjusted, very interesting.

@Joeboost8805 Год назад

That SOUNDS INSANE , AND THE THROTTLE RESPONSE IS GONNA BE HARD HOOKING UP!!! SWEET BUILD

@Joeboost8805 Год назад

WELL WORTH THE CLUTCH!!!

@SoI_Badguy Год назад

HELL YEAH BROTHER AROOOOOOOO

@Toddo-ld5ml Год назад

I love Sunday's great to see you and Dave out there ripping you rides. Glad to see the C10 finally straightened out

@coryhall561 Год назад

Super pumped to see Newbern again, and his 57 is looking Badass!!!

@michele215 Год назад

The truck has always been my favorite build on the channel. It sounds awesome. I was all smiles and giddy the entire burnout session! Glad Newbern made the trip as well. Thanks for the amazing content!! #burnouts4life

@kylelanger4234 Год назад

MAN!!! Newbern's 57 looks and sounds amazing! Perfect patina, great looking trim, nice wheel fitment and wheel combo, and it sounds like it's pissed right off!!! Love it!!

@tesla747 Год назад

I think someone is trying to scam us.

@mrmoss149 Год назад

I know it's been said before-but you guys are INSANE. Lovin' it!

@docsgearheadgaming2503 Год назад

Great to see these two back together! Sorry about the clutch, but thanks for the entertainment!

@TheTulerie Год назад

I'm so excited to see this truck finally get some attention. Probably one of my favorite vehicles Finnegan has!

@scottburrow8717 Год назад

Look who it is. David Newburn on the channel again. You guys are so good together.

@amybot7182 Год назад

Man i love it when people like that come out and help. Eventually I plan on putting a little holley sniper on my 74 super beetle

@buckykattguitar Год назад

I’ve got a 63 bug with a 2275 I did that with. Single best mod I made on my car. You will not regret doing it.

@jahmackey Год назад

Great show! I think the first time I saw your channel was when you were building or rebuilding your c10 with your friends in a week...very cool the truck is beautiful....see you and Neubern(cksp) was awesome....I think the best part of the show was watching two friends having fun together! Thank you for sharing!

@daboenterprize8265 Год назад

Awesome too see the c10 finally getting it done and seeing Newbern and 57 was amazing ❤❤❤🎉🎉🎉🎉🎉

@brianrichardson7946 Год назад

Love Love love this truck and can't wait to see a heads up between freiburger and finnegan

@Cybergasm01 Год назад

Love the little convincing it takes Dave to keep doing burnouts lol Anyone else notice that Mike and Dave were twinning at the end of the video LOL

@Mike.hobbies Год назад

Quality episode,so good to see the truck going well.. really loved this Mike and great to see you with Newburn again also. Love David's channel I highly recommend it to all

@XBullitt16X Год назад

One of my favourite cars and build's of Finnegan's, I hope it finally gets painted and completed, will look awesome when its done.

@scottimusgarrett15 Год назад

Nice to see 12-Volt come out and do some vulcanizing!😂 And you looked like Spicoli gettin' out of his van after lunch after the 6th gear burnout. Nicely done! Too bad about roasting the clutch, though. I guess we'll see it again in a year or two!😂 ✌️❤️🙂🇨🇦

@cryptoredneck8255 Год назад

I just got into tuning my truck, I'm so jealous of how consistent your idle is brother!

@michaeltucker4875 Год назад

You guys are the right kind of nuts!!! Being from Cartersville,ga it’s good to see some down home boys doing it!!!!!!!

@GearheadOutlaw Год назад

That truck is the new standard for how to build trucks, Wicked

@stevew9247 Год назад

I guess my question would be, Why did Holley sell a product for an application that would never work as shipped, and quite obviously had never been tested? It's been 3 + years now and the fix isn't yet released. How much money and time have buyers spent trying to make a defective system work?

@gkixe4y Год назад

Bacause they don't have to care.

@dickfitzwelliner2807 Год назад

Probably because it was setup for an ls?

@heytonyman Год назад

Just like he said in the video… it’s made and advertised specifically for LT1, L83, and L86. Not LT4.

@user-neo71665 Год назад

He is trying to use a setup designed for an LS engine on a LT engine. I'd almost go out on a limb and say it most likely was designed for a na LS on a supercharged LT throwing another wrench in the mix.

@dnchevyguy3 Год назад

Nothing about it was defective. He was trying to run it on an LT4 when it was specifically sold to work with LT1 injectors. Looks like the new version will work with the LT4 injectors as well though.

@thman6453 Год назад

Man 12 volts 57 sounds great 👍 nice job Dave

@leecavalla5917 Год назад

There is something with the old metal I could not stop smiling thanks so much for the 57 footage

@thenamesPRINDLE Год назад

I haven’t been following along much this build so I must say DAYUM! thing is a beast but I love the dual screen for the passenger!

@XStream09 Год назад

If you are going to do standing burnouts like that again, put in an external gear indicator for those watching, that would be awesome 😮

@charlestorruella8591 Год назад

there one in the dash didn't you see him point at it and say this is so you know what gear I'm in don't you feel stupid now

@static_bolt Год назад

@@charlestorruella8591 EXTERNAL, as in outside the cab for spectators. you clearly have excellent reading comprehension

@garrettwalton7461 Год назад

@@charlestorruella8591 man there is zero need to be this rude, get a grip

@jont8707 Год назад

Dave built a sick 57 love how that thing looks

@lauriehenderson9915 Год назад

Stupidity squared!

@jont8707 Год назад

@@lauriehenderson9915 do what

@ajherman Год назад

That 57 is beautiful. Love the shine of the trim and wheels contrasting with the patina. Not to mention it sounds rowdy as hell.

@mwaynem Год назад

It's strange how some sounds can take you back 45 years. I owned a 67 C10 in 78. When you closed the door at the drag strip I instantly remembered that sound. Only old trucks make that hollow clank. Again thanks for sharing 👍.

@nocoasthero1204 Год назад

I love this truck. I’m currently in the process of building my 78’ LB gonna lay out like a beached whale 🐳

@demonic477 Год назад

you should be able to re valve the master cylinder for both sets of brakes you just need to know what the factory Ford master cylinder put out for pressure and match it . or get Wilwood to do it for you they love that kind of problem If you call and ask them they will figure it out they even built a set of custom brakes to fit Model A's for J leno it's what they do

@Borp56 Год назад

This thing is just incredible. Been wanting more of the C-10 content.

@Big-John Год назад

You both are having to much fun! I love it! Glad you got the truck figured out! Keep up the great work 👍

@jagharingenyoutube Год назад

Thats called cheating :D With the rockers on the ground the weight isnt on the tires

@benbrown2119 Год назад

This brings me back to when I swapped a 455 Olds and 200-4R into my 1981 Oldsmobile Delta 88. Did a 4 gear (plus lockup converter) standing burnout when it was done. The picture is way back in my Instagram feed.

@leebrown2063 Год назад

Watching this is a blast from the past.used to watch roadkill religiously

@bigfootgarage2201 Год назад

I still think the truck would look badass in the GM crystal white frosted color from the CTS V with black chrome on the trim

@trumbley22 Год назад

🤮

@mollyv2755 Год назад

Despite the economic downturn, I'm so happy 😊.I have been earning $ 60,200 returns from my $7,000 investment every 13days✓

@hannahjosephine8119 Год назад

That's amazing, I have been hearing about Mr Alex Adelman and their geniuses mind in the crypto market, please how did you earn such good amount?..

@user-uz6hk5pu7s Год назад

I think I'm blessed because if not I wouldn't have met someone who is as spectacular as expert Adelman I think he is the best broker I ever seen

@tysonbeckford9248 Год назад

The crypto market is highly profitable with an expert broker just like Mr Alex Adelman . I got recommended to him and since then my financial life has been a success.

@charlesgraham9954 Год назад

GOTDAMN..!! i love the sound of an engine. every new engine iv done, iv laughed like a schoolboy hearing them run for the first time.

@theglitch99 Год назад

A day w/Finnagans would be a BLAST!! DUDE HAS BAD ASS TOYS! BEST OF THE BEST!!

@gregsegrest4126 Год назад

I've always like the 67-68 c10s after Stacey David built Copperhead and I'm a diehard squarebody guy but I've never had a dream truck until you built this this. Words can't do justice to describe that beauty.

@craigjensen4179 Год назад

Finnegan is definitely my favourite RU-vidr. Even better when he's with Dave Look forward to every episode 💪💪

@LT4Nova Год назад

Awesome! I've been waiting for LT4 SUPPORT!!! THANK YOU.

@thomaslammert6567 Год назад

love this! Been to holley school but this is so much more info, for the LT4!

@davedeja Год назад

So good to see Newbern back with you even it's just for the afternoon. Gonna go give him a sub.

@kenadams2799 Год назад

Don’t forget to run, Lucas fuel additive in that direct injection system. I had one of those with real high rail pressure and it goal two injectors. I started running Lucas fuel additive as per the bottle and never had another problem. Awesome work over there. You are my go to channel every Sunday morning because it makes my week better. Keep up the great work.

@mickc4633 Год назад

Nice truck I had one of those back in the day. Factory big block, air everything short bed . Wow technology wow.

@vicswanby454 Год назад

You've both got some pissed-off Bever getter's! That was a fun watch. Glad to see you two together again having fun. Keep up the great content and keep the shiny side.

@obsidian.... Год назад

Love seeing you and Newbern together 🙏

@tonykemper8896 Год назад

Yes the c10 is my absolute favorite build! So happy it’s running good now, you know except the new minor clutch issue!! ✋🏻12v Dave love your channel!

@nicknamebulin889 Год назад

Glad there’s a tach on the passenger side. Fun to watch!

@kenadams2799 Год назад

Wow that truck rocks. I had a a 69 gmc 1/2 ton and I miss it. Keep it up. Your the best

@jefferyridlon151 Год назад

I am a sucker for the OG muscle truck but dam the s10 is sick! One day I am going to travel and see some of your builds!

@justinsaunders6975 Год назад

That's sick. Would love to see it in person. Finnegan you should come to the mini truckin nationals in Maggie Valley NC in April. It's the 21st through the 23rd.

@michaelgf8840 Год назад

Wow, what a coincidence! My 2003 expedition has a 2003 expedition rear end in it also!

@94XJ Год назад

31:06 I've sad that quick "ok" a few times in my life... that's joy right there😂😂

@PullStartStables Год назад

Thank you Chevy, for so much awesome! That ‘57 spinning sprinkle donuts and the C10 as a whole is just Bacon!

@YaBoiDan Год назад

So happy to see Newbern pop back up. This was awesome altogether

@markgaudlip8846 Год назад

The interior of that truck is soooo clean ... love it

@danielkanewske8473 Год назад

Good to see Newbern again

@Joebro200 Год назад

What a good Sunday. Not only getting a sick Finnegan video, but its of the C10! Sounds insane. Building a 67 short bed fleetside c10 right now. Butternut yellow. Wanting to build a 496 or a 555 big block for it with a Tremec t-56 magnum. Just need to find a good core! It'll be a 496 if I find a good gen 4 core, or if I wanna spend the extra money a Big M Dart block would be sick... either way the money will make this project sit for some time more.

@fredericrike5974 Год назад

Holley sure found the happy place for your monster! One of my early trucks was the small window 67- great times! FR

@TheJkc81 Год назад

To me, everything is perfect about that truck. Bare metal everywhere, forgelines, sequential trans, dry sump. Love that truck!

@randalldavidson4483 Год назад

Love seeing Newborn back. Those two are awesome together.

@JoeMama-rs4gf Год назад

I own one of these the same year and it is just really cool to see what you are doing with this one

@grahamerosewarne6656 Год назад

Mike I like your truck and have done since the first time it was on the channel. Can't be any better hands. 👍💯🆒🤙

@Riffs_Garage Год назад

I really enjoy the dyno/ tuning videos.

@user-ih7gc7dt9l Год назад

Direct injection in the aftermarket scene is a new one on me. Must have been living under a rock!

@cadilakisrodcustom Год назад

This is my favorite c10.. and the sound is perfect!

@davechretien9301 Год назад

What a fantastic way to spend your days!!!!

@stevenrobertson9583 Год назад

Now that’s the Old School hot rod, big fat tires in the bag a low thin wheels in the front and sitting high in the rear! Just Awesome 😎, Beautiful Performance thing of Art!!!!!!! Oh almost forgot NO NOS GOING TO THE MOTOR, only thing NOS was used for was to cool the intercooler so you was making the air cooler and thicker going to the intake!

@johnbehneman1546 Год назад

CONGRATULATIONS ON YOUR UPGRADES MIKE!!!! SHE IS DIALED IN NOW!!!!! GREAT VIDEO AND EDUCATION. THANKS FOR SHARING!!!! I LEARNED SO MUCH!!!!

@JeepnNick Год назад

Glad to see yall still get together for 🔥 outs

@JAGoodwin84 Год назад

This was a GREAT episode!

@tw6085 Год назад

David is doing great on his channel. Love both you guys channels

@ryurc3033 Год назад

Ok so in 07 when this was originally built, a 2003 expedition rear diff was ridiculous, it was like using a 2018 rear diff in a truck today. When I was reading about it in sport truck magazine all those years ago, I never imagined I would be watching a video of it doing a Dyno pull! Thank you for all the inspiration over the years. One of these days me and my son will come on a power tour,even if it's in my grandpa's low mile 92 regular cab longbed Chevy. My 76 big block short bed would be more fun, but expensive, or 87 blazer would be good for hauling spares and a tent.

@ryurc3033 Год назад

By the way, that thing is definitely making a run for the sweetest sounding muscle truck ever. Give Dave sweetest sounding square, and you call sweetest sounding C10?