I Build a Big CNC Machine - Homemade CNC Final Part 

Hope you never, like ever, have to move that beast of a machine! Well done!

Very well done. A great example of building accuracy.

forgive me but you did not build a home made machine you have made a beast!! great job.

You have a ridiculous amount of patience…… well done 👍🏼👍🏼

В шортах и майке заниматься работами со сваркой могут только любители!😆 Надеюсь расплав алюминия разливали в брезентовом, или суконном костюме. Берегите себя!

This device now owns that room because there is no possible way to remove it. Nice.

Frankly that's magnificent. The problem for me would be that building the CNC itself might be more fun and more rewarding than what what I might ever build WITH it. One thing for sure, you're doing this because you want to, not because you need to. A Phantom Shadow is only $23,100.

wow, master project! RESPECT

Well done. Thanks for sharing!

The technique for aligning and squaring the rails with common shop equipment (other than the beam straightedge which isn't common) is pretty brilliant. I have been stumbling over how to do this in my garage. I also never thought to align the cross table supports to the already installed gantry and z axis assembly...that will be a real time saver. I am wondering if Mr. Craft is a Millwright to have such knowledge?

Craftsmanship a 100😮 great work

You guys are brilliant

1:06 now that is a controller I would kill for…😂😂

Это просто мечта ...

no word on movie, no word at comments :) great job sir :) This is not elementary book of machines... go to school ladies ;-D

WAOOOOO ITS AMAZING I NEVER SEE BEFORE

"Что ты здесь ходишь всё вынюхиваешь" 😂

Very nicely done.

well done M craft loving your machine looks supper cool and well built😀

Nice work👍👍👍

после слов (Что ты здесь ходишь всё вынюхиваеш) я немного напрягся :D

amazing cnc build !

BRAVO!!!

Very impressiv 👍👍👍

Cool trick with the cd

Nice Video! I agree with the other comments - you do have some nice “tricks“ for the assembly. I'll have to try the CDROM method sometime. BTW: Where did you source the Spindle? Are you happy with it?

Good work!

So satisfying

Nice one! I would love to have one myself

very good thanks

It not homemade..it factorymade

Асом. Амэйзинг))

Congratulations, very good ! If you use hiwin linear rails results will be better!

Beautiful

оо, краска от пачанов

Well done

Excellent work, I loved the CNC and it's envious, post a video of it in real work so we can enjoy this work. By the way, what was your total expense? Compared to one sold on Aliexpress, how much was the difference, besides of course the pleasure of creating it? Congratulations! I hope you make good use of it!🙂

so good

very nice !good job!!

сделано отлично, но большой жесткости не ждите от этих направляющих.

The CD is a brilliant trick

Great job ❤❤ super

My build would be so much easier if I could find a deal on a nice beam straitedge like that! Is he using the CD reflection to make sure he is running the drill motor perpendicular to the plate? Thats pretty cool.

this is a beast 🙂

nice build....the techniques you used is clever......which type of stepper motors are you using?

When I do the crossed cord height alignment I always use two cords in one of the directions. The other crossing cord then passes between them. You can then see exactly when the heights are correct.

respect

Niubi!

Здравствуйте! Не понял момент на 3:36. Плоскость не получилась, раз нити разошлись? Плоскость вдоль оси У вы выровняли по линейке на краску. А как же плоскостность вдоль оси Х? Или конструкция направляющих по оси У допускает самоустановку?

Beautiful machine. If I were to build one, I’d make it so that the legs can be removed and the entire frame for that matter. This machine was apparently built in a small room which means they’re going to have trouble getting it out should they decide to move. They will most likely end up knocking down a wall. Anyway, all the best of them.

Good job, how did you solve the software side? Did i miss?

What was the strength quality of aluminium when compared to metal is this last long.

how is this homemade ? you have industrial equipment in your home ? sleep with a welding machine ?

Keren❤❤❤

Greetings friend. I have a question, do you also use a creamyera in the Y axis transmission?

Здравствуйте! Обратил внимание, что по осям X и Y у Вас к зубчатым рейкам шестерни прижимаются пружинами. Насколько такое уместно? Разве это не создаёт огрехов в точном позиционировании под нагрузкой?

What is the thickness of Ms sheet for y gantry?

hi great machine, i have a question, where do you get thr rails of this machine

hola estimado saludos desde peru que medida de cremalleras utilizo para su proyectó

Боковые детали каретки так и остались на прихватка?

what do you call that long bar that used for leveling?

why no using guiide liner , level using leser beam

What is the weight for the X axis bro

please tell me belt timing pulley gear ratio i think 1 ,2

please tell me belt timing pulley gear ratio for Y axis

Советская школа

Михаил?

I mean, it is a nice build. But sorry to say, It hurts me so much to see you weld without any protective gear for your hands and that you spray paint WITHOUT any mask. Please, never spray paint without wearing a mask... Breathing in that toxic stuff, not good. Got the money to buy the metal and all the components needed, guess you should spend a little of that money for your own health. Also to teach other people that are watching your video. Can get really sick from that shit.

РМЦ =)))))

So funny u straight the rail place , to use a shitty sbr rail ....

Muito ruim.

@2:06 did you have Diarrhea?

Homemade DIY🤡

Спасибо, очень познавательно! Подскажите как добивались прямого угла, между осями Х и У и Z ?

Huge fail using the round rails instead of linear guide ways.

Nice, you stole the Idea from New Yorkshire Workshop and made a great Job. I love such Videos of "Low Budget Selfmade High End Stuff" thats works really really nice!

wonderful machine, friend, why at minute 3:30 do you use some threads, what is the objective of these threads?

One way to check for twist is to use the two wires method with a multimeter set in continuity mode. Hook one end of one wire to the positive lead and the other to the negative lead. When the two wires touch, you'll hear a beep.

You should hook a vacuum system up to the CNC.

Hello. Everything is beautiful and interesting. Question ? Maybe it would be better to buy a ready-made factory machine and start earning money right away! What to do with a stupid job?

Dude must be planing to CNC an entire building with this thing!

That trick with the CD was genius!

great work! I would however have a question, why did you choose the rack and pinion system, rather than a ball screw system?

That’s awesome. We want to see more! What can this thing make? Also I want to know how you installed a vacuum system on this.

The sheer amount of love and effort put into this machine is commendable. Very nice setup!

eres super bueno en lo que haces trabajando el metal , mi admiración

Красавчики

What a machine, great workmanship. Thanks for sharing some fabulous accuracy tips,

Мистэр, великолепно😊

muito bom, estou iniciando a fabricação da minha cnc plasma.

What is the size of the cutting area on this machine? X and Y

Hello my friend. Well done

Хочу такой :)

Berapa ukuran mejanya?

Smart guys

trabalho perfeito !

Topp

Jestem pełen podziwu dla twórcy. 👍👍

man i am 3 min into the video and those two hacks with the cd and the thin wire.....niiiiiice i love them