Тёмный

I got three different sets of shocks for this CJ7 and then tested them! 

CRAWL TV
Подписаться 28 тыс.
Просмотров 2,1 тыс.
50% 1

What a timeline! Have you ever been gifted a part and then realized that now you have more work to do than if you just said no thanks?
I got the first set of shocks from my good friend Hollie Fowler. Her channel is ‪@MischiefMakerTV‬ here on RU-vid. She is currently building an insanely nice giveaway Jeep with tread lightly, and the stock JLUR shocks were prime for the picking. I should have known that nothing is that easy!
After those didn’t work, I said fine… I’ll just order some Rancho shocks and go the cheap route. I found a set online that were advertised for a 2-3” lift, but when they arrived they were actually stock shocks, so they were WAY too small for my Jeep.
That was when I finally broke down and just bought some nice Bilstein 5100s that I knew would fit, because their specs were actually listed online. With a quick verification using a tape measure, I was sure that the third time was the charm.
Then, it was just a matter of installing them and testing them out!
Old, leaf sprung jeeps are not supposed to be jumped. I’ll leave you with that.
Luckily, the 35” tires helped push the fenders out of the way in the landing though so now it doesn’t rub as bad 😂

Авто/Мото

Опубликовано:

 

10 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 32   
@johnstup4479
@johnstup4479 28 дней назад
Heck of a journey for some shocks.😁 Glad you got it all figured out.
@CRAWLTV
@CRAWLTV 28 дней назад
No kidding! I sometimes wish that I could just leave things alone. 🤣
@BattlePhrog165
@BattlePhrog165 28 дней назад
VA: your back claim has been denied. Jarrett: why? VA: I'm a subscriber.
@CRAWLTV
@CRAWLTV 28 дней назад
LOL! Since we last spoke my claim has been submitted. I have my first “exam” tomorrow and another Thursday. Wish me luck. 🍀
@HardcountsAdventures
@HardcountsAdventures 29 дней назад
Awesome vid, can’t wait to see those things on the Rubicon.
@CRAWLTV
@CRAWLTV 29 дней назад
They should hopefully make a huge difference!
@gregchiropolos9885
@gregchiropolos9885 28 дней назад
I would bet your springs are Rubicon Express 2 1/2 inch. They are good springs, first time viewer like your channel.
@CRAWLTV
@CRAWLTV 28 дней назад
Thanks for the comment! Any tips on how to figure that out? I think another thing that was messing with me was the custom spring hangers and shackle reverse kit stuff. It looks home made, so I don’t know how much that adjusted the ride height 😂
@PaulKaiser42
@PaulKaiser42 28 дней назад
I can’t mount new shocks because the Northeast makes rust out of Jeep frames 😭😭 Great video as always 👍🏻
@CRAWLTV
@CRAWLTV 28 дней назад
I know all too well after 8 years in Illlinois 😭 Thanks!
@PaulKaiser42
@PaulKaiser42 28 дней назад
@@CRAWLTV 😂😂😭
@MischiefMakerTV
@MischiefMakerTV 28 дней назад
Third times the charm! #sendit 😎🤘🏻
@CRAWLTV
@CRAWLTV 28 дней назад
Thanks again for the shocks! Even though they weren’t a perfect match it was worth a shot!
@MischiefMakerTV
@MischiefMakerTV 28 дней назад
@@CRAWLTV no problem at all! at the rate you guys are purchasing projects, I’m sure you’ll find a use for them soon! 😈
@ronwilson9202
@ronwilson9202 28 дней назад
did not see you in Big Bear last weekend. I broke front axle. lots of gen 6 broncos there.
@CRAWLTV
@CRAWLTV 28 дней назад
Hey Ron! I’m sorry we missed that trip! We were elbow deep in the first gen. I took your advice and we ordered a 1” body lift to run 35s. I need to get that body lift in before I make my final fitment on the panels, so that I know everything is truly square. Hopefully the front axle didn’t ruin your weekend and wasn’t an expensive break!
@RonWilson-jw3rc
@RonWilson-jw3rc 24 дня назад
Someone had another axel and after strapped off the trail went back to the Moose Lodge and replaced the axle and back to the trail. No one was at the gate keeper and the three of us went thru. We ended up catching my group from earlier. They were stuck behind a jeep blown out ball joint 2 hours. Very surprised to see me. Adventure fun.
@cjg1482
@cjg1482 28 дней назад
What model are those seats?
@CRAWLTV
@CRAWLTV 28 дней назад
These are PRP Comp Elites. They completely change the feel of driving the Jeep. They fully lock you in. It’s awesome
@christianm3854
@christianm3854 28 дней назад
Is your PRP steering wheel on a quick release?
@CRAWLTV
@CRAWLTV 28 дней назад
Good question! I actually tried welding in a permanent splined quick release and ruined my steering column in the process so now it’s just bolted in with an adapter on a new column 😂
@Ironfireman11
@Ironfireman11 28 дней назад
Crawl TV, how can I find out more details on the High School CJ? Motor, drivetrain, etc. Thanks!
@CRAWLTV
@CRAWLTV 28 дней назад
I have a bunch of various videos on it in the High School Jeep playlist! If you want the general overview, it’s this: 1979 CJ7 304 AMC V8 T150 transmission (I will be swapping that out for a T18A here soon) Dana 20 transfer case Factory narrow track axles (for now) Shackle reverse kit with unknown lift kit brand Tom Wood’s Driveshafts PRP Seats, harnesses and steering wheel RockHard 4x4 harness bar Raceline monster beadlocks WARN locking hubs Baja Designs lights Optima yellow top battery And a bunch of other stuff I’m forgetting 😅
@CRAWLTV
@CRAWLTV 28 дней назад
Oh! And as far as the axles go… Dana 30 front with 4.56 gears and a lockrite lunchbox locker The rear is an AMC20 with 4.56 gears and a Detroit locker. It also has TEN Factory one piece axles in it. Both axles have OX locker diff covers. I have a high steer kit from OK4WD and the steering is Rugged Ridge HD
@Ironfireman11
@Ironfireman11 26 дней назад
Thank you! Now I have a list to go by. Factory tub?
@CRAWLTV
@CRAWLTV 26 дней назад
@Ironfireman11 yep!
@JorgeRodriguez-mo5mx
@JorgeRodriguez-mo5mx 28 дней назад
Did you modify your passenger rear view mirror?
@CRAWLTV
@CRAWLTV 28 дней назад
It’s not functional 😂 When I got the high school jeep, it came with the disclaimer that it had been rolled before. The tub is bent in the back corner, and the cowl is dented on the passenger side. The mirror was all twisted up when I got it, so I just did my best to straighten it out.
@JorgeRodriguez-mo5mx
@JorgeRodriguez-mo5mx 28 дней назад
@@CRAWLTV It looked like your fixed the Inherent design flaw if the AMC passenger rear view mirror.
@CRAWLTV
@CRAWLTV 28 дней назад
Oh! Haha! Well in that case it was totally intentional! 🤣
@cjg1482
@cjg1482 28 дней назад
Rancho are junk. You are lucky that they didn’t fit.
@CRAWLTV
@CRAWLTV 28 дней назад
Oh good! Well I’m glad I dodged a bullet then!
Далее
Installing Bilstein 4600 shocks on my First Gen Tundra
17:54
I surprised the Crawl Guys with NEW SEATS!
16:55
Просмотров 1,1 тыс.
The SHOCKING Truth - Bilstein B4 vs B8 (B12) E46 330ci
23:30
Did we ruin my JEEP by doing this?
15:46
Просмотров 2,8 тыс.
Are we in over our heads? Early Bronco rust damage
21:16
ВЕЛОСИПЕД ЗАГОВОРИЛ
0:15
Просмотров 13 млн