I won $100 with the BetaFPV Meteor65 with BT2.0 connector!

Подписаться 332 тыс.

Просмотров 53 тыс.

50% 1

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
The BetaFPV Meteor65 is a ridiculously fast, powerful, and agile 1S quad. Honestly, I never thought a 1S quad could fly like this. It has power and speed more like a 2S whoop (Trashcan, TinyHawk-S), but with light weight and agility more like a 1S whoop. The result is a really, really fun to fly quad, as long as you have the space to fly and the skill to control it.
But let's not bury the lede.... what about the BT2.0 connector?
-- PRODUCT LINKS --
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
Purchase the Meteor65 at:
* BetaFPV - bit.ly/2LL4DNj
* GetFPV - bit.ly/2PDON7Y
* RaceDayQuads - bit.ly/35h250V
* ReadyMadeRC - bit.ly/2RHgM9D
* Amazon - amzn.to/2LK8CJE
Purchase BT2.0 accessories like connectors and adapters at:
* BetaFPV - bit.ly/38rvBmE
* GetFPV - bit.ly/2rBlKdp
* ReadyMadeRC - bit.ly/38waHTi
Compare the Meteor65 to the Mobula6 at:
* Banggood - bit.ly/2PH6WlI
Compare the Meteor65 to the Newbeedrone BeeBrain Brushless at:
* Newbeedrone - bit.ly/2RK3r07
MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
Most or all links above are affiliate links, and I will receive compensation if you use them.

Опубликовано:

10 дек 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 234

@RADERFPV 4 года назад

Congrats Joshua! Most of us lose money every time we go out and fly (gotta love repairs), nice to see someone on the upside.

@MCsCreations 4 года назад

Awesome flying and review, Joshua! 😃 The quad really seems fantastic!

@topfs2 4 года назад

I just want to say thanks for great great content. And I really appreciate that you don't do what many RU-vidrs do and cut like crazy, it makea it much easier to watch and listen to you. Anyways, thanks will most likely order a meteor65, looks Hella fun :)

@rbmwiv 4 года назад

Great job on the race. Sweet little whoop. Great video as always.

@-Gruntled 4 года назад

Nice review. Thanks. Looking forward to your Mobula6 review. Maybe with the 19kv motors?

@frankbarajas 4 года назад

Gotta love the new BT 2.0 as is addresses the power sag issue we have endured forever with the PH1.25 to the PH 2.0. However, another key thing to this connector is the number of mating cycles that they are designed to operate. The PH 2.0 is only rated for some 25 cycles whereas the BT 2.0 should be in the hundreds before one would see any significant degradation. *Great video and congrats on the win!*

@multirotormanish7220 4 года назад

Excellent review! Thank you🙏🏾

@Prop-A 4 года назад

Sweet gamechanger 😉 looks really good. Congratulations with the race btw 💪 good stuff. I am happy with my modded DK65 and Moobzy.

@changeagent228 4 года назад

Dear DJI, please make a whoop sized all in one camera VTX using your digital HD FPV tech. It only needs to be 25mW although id not argue if a discreet hack unlocked a secret 400mW mode. Make it less than 5 grams including the dipole antenna and keep both sets of RX and TX pins for the FC link and controller. Thanks. 👍😁

@Leafyfpv 4 года назад

great edit, showing both race and product... And the thunder rolls... great song!

@BigAlFPV17 4 года назад

Definitely enjoyed the video Joshua. Also like the shirt

@Samvip00 4 года назад

You have now finally convinced me to buy a whoop. Just snagged it, now waiting like a little kid on Christmas eve for it to arrive.

@Lizlodude 4 года назад

Can confirm, that PCB on the motor is awesome. Been running a brushless whoop for a while, killed 4-5 motors and on every one it was the motor wire connection that failed and didn't leave enough wire left to solder. The wires never seem to be tied down to anything so they kinda just flop around and even if they don't catch on something they just break off eventually.

@coltenmilford6837 4 года назад

Great review! Those 300mAh burn up quick. I'm going to have to use that BetaFPV link to pre-order some 450mAh packs!

@unacceptableminority7101 2 года назад

I have 450 and night and day difference.

@johncarold 4 года назад

Hi Josh Great review of this little guy. I have a beta65s that I still fly daily, For a tiny whoop quad BETAFPV is a great place to start. I had a whoop that had 8mm instead of 6mm but those are brushed. But I would like to get one for a replacement for my 65s. Thanks again for the information and review.

@CharlyDuesentrieb 4 года назад

Also to take into account when comparing connectors: all Chinese whoop manufacturors including BetaFpv are using PH2 scrap connectors with sheet-folded pins, because they can crimp these instead of soldering. These tend to oxidize quite quickly with lots of voltage drop. Compared to that, the original PH2 connectors are using solid pins which are much more robust. But in any case BT2.0 is a great progress for 1s whoops. If I would not have changed all connectors of my Beta 75 Pro and batteries to XT30 I would go to BT2.0 now.

@luki-bs6419 4 года назад

Nice Gerd

@allamvantende 4 года назад

I always clean the lens with a thick microfiber cloth when there is glare. It helps a lot. Most of the time the grease from youre fingers causes it.

@IanF-FPV 4 года назад

Never going to hear the end of JB the Gwadddd winning a race...congrats again...

@karterjones9590 4 года назад

I ordered the Black Friday edition of it thinking “there’s no such thing as too much power” lol ooooppps

@mikaelbackstrom 4 года назад

Me too! Can hardly wait to wreck it. :)

@peterzingler6221 4 года назад

Oh boy it's fking fast

@TheGrosneuftrois 4 года назад

take uk.u65 + gnb 450mah

@legendarypot8oanimates160 3 года назад

@@TheGrosneuftrois try 550 crazypony lipos they get me speed

@TheGrosneuftrois 3 года назад

@@legendarypot8oanimates160 OK thank you

@Cre8ionz. 4 года назад

Used your Affiliate Link.. Will buy 2 Mob6 SOON YEAH ! will upgrade to BT2.0 for sure !

@SkyCandyVisuals 4 года назад

I love taco time! i also love those new connectors! THANKS FOR SHARING! I'll have to mod some to my 1 & 2s bats for the 85x ltr bro...

@MrGaussFPV 4 года назад

Got a 👍 from me because of the GB cover band - killer sound boys 👊🤖

@MrShutterBug 4 года назад

Thanks Joshua your videos are always great! Two things I would say: 1) The PH2.0 is rated for 2A (en.wikipedia.org/wiki/JST_connector) but it can obviously carry more, with loss. 2) High KV motors with bushings totally wear out. If you race a lot you will not really want to use the same motors for more than a few months. Not a big deal if you're serious about racing, but they do not last. It will be interesting to see if these hold up any longer with the bearings.

@bkmahaffey 4 года назад

I should be getting some BT2.0 connectors today. Going to convert my 65s, 65x and my bee brain lite. Ph2.0 on all 3 whoops are warn out. I can fly for 1.5 mins then get low battery. I then unplug and plug back in and get another minute. Sometimes I get low bat when I first connect the battery. I unplug and plug back in and get a 3 min flight. I bent the pins and that helps for a while then it gets worse. Got high Hope's for the BT2.0!🤞

@martinmaciel9780 4 года назад

Ready set drone? I watch his videos all the time 👍👍👍

@trashyLAMF 4 года назад

I'm convinced in regard to what BetaFPV is doing here. This lil effer rips!

@Jrod_FPV 4 года назад

Thanks for the vid JB! I wonder if you can do motor output limit in betaflight and get your 4 minutes of flight time out of the 22,000kv motors to match the 19000 kv. is a 22,000 kv motor actually 22Mv ? (kilo vs Mega)

@VicknairDoesThings 4 года назад

BeeBrain Brushless? I’m waiting on it before I buy a 1s brushless whoop. Very tempted by the Meteor65 tho

@user-jw4de7ef8q 4 года назад

BetaFPV does not sell the camera mount separately but provides an STL file to print it out. I do not own a 3d printer and would appreciate you printing one out on your new 3d printing series. I need the camera to be enclosed in a canopy because I crash so much flying/learning acro indoors.

@Cre8ionz. 4 года назад

took me like 2 Hours to watch it bc I researched a lot about BT2.0 and checking out the Mob6 :D

@evanouellette9400 4 года назад

can you do mobula 6 vs this drone thanks again great video

@roccopolifrone8024 2 года назад

Question…..I hope I’m going to learn something today….I have the BNF 65-Lite….no micro port for connecting to Betaflight….it’s binds to my Taranis x7 but it not working….the tones when powers up is all good…..I see the protocol is SBus…I ordered the FrSky D8 version…..I’m told to turn off my Ext FR…turn off the PPM protocol….any thoughts? Thanks Rocky…

@ChristopherNovaSmith 4 года назад

The Newbeedrone BL with NBD 20,000 RPM motors, BF4.1, Project Mockingbird tune, 48khz mod,, and RPM filtering is great. It even has a 100mw VTX.

@Dragonfly35RacingTeam 4 года назад

Hi! I'm totally new to FPV I just got one of these today in the 19500kv motor setup. I've been flying helis and airplanes for over 10 years and I'm well versed in all that. But as it turns out this is totally different. I'm currently on the stock pid tunes and I was wondering if you could share your setup for this? I'm looking to fly freestyle in acro mode mainly. Potentially races this upcoming winter. Thanks!

@marinehm 4 года назад

Makes me want to get one!

@thargor6750 4 года назад

Love my uk65. I just ordered this. I do not think it will be as good. Will let you know

@michaelreyes8670 4 года назад

Tempted to buy the Meteor 65 during Black Friday Sale and watching your video I already got an Eachine US65 brushless whoop, would upgrading the motors, props and batteries worth it?

@Bear049 4 года назад

What would you recommend for a good indoor slow floater. Thanks love your channel

@richardduncan9740 4 года назад

A "Blade inductrix fpv" not the best but since no one had made another recommend I'll say it's not the worst 😉

@rockman49er 4 года назад

Hi josh i was wondering about the 2k gyro ive never went higher how high do you set your fc to and what does it do and mean can i do quiker rolls and stuff is this why when i go crazy on the sticks it cant keep up and kinda desinks or something thanks josh and congratulations on winning the woop race

@RCinginSC 4 года назад

You do need to consider the extra cost of new lipos, or at least converting old lipos when buying this. Although, it's prob the gonna be standard in the future , so might as well make the investment now.

@danielzawerton7023 4 года назад

I would save the $30.......... Congratulations on your win !!!!!

@legendarypot8oanimates160 3 года назад

JB, you should try 450 to 550mah gnbs. On my modded uz65 I have use 550 nah lipos and I get around 5 mins exactly of cruising and about 4 mins outside in speedy flying.

@yosayogi539 4 года назад

Props in on the winning whoop! that's an eye catcher. I thought props out was better handling for these sized crafts? The pcb on motors, same idea as rebel motors. Great idea.

@ProjectMockingbird 4 года назад

Props out is better for angle racing

@yosayogi539 4 года назад

Yea but if you watch older videos , you will see what I mean.

@AdamLaFrance2600 4 года назад

TACO TIME!!!! Do you think BT2.0 is the future? Will other whoop manufactures follow suit? If money and time weren't an issue, would you fully switch over?

@georgeaura 4 года назад

I was wondering do happen to know of a carbon frame that could replace the whoop style of the beta75pro2?

@muchthump 4 года назад

Is it possible to switch cameras on these guys? To something like a runcam nano3 and tbs nano vtx? More trouble than it's worth? Looking for a camera that can handle a darker LED lit course for whoops. As well as being able to have clear video on the other side of a big warehouse with some sheet rock walls in between me and the back area. Any and all suggestions are helpful.

@ZeroCautionFPV 4 года назад

Josh, I can't bind to my Qx7 with this meteor 65. I've made sure to update the firmware on the radio and used the cli dump provided by betafpv support page. What radio do you fly with ?

@stelic9515 2 года назад

Thank you alot alot alot Ooau I heard something important, bearings are better but bushings have also long life span. I want to buy mobula7 1s elrs and cancel because motors have bushings.

@jtg_rc1583 3 года назад

Hey JB idk if this is the right place to ask you this question, but i just got a meteor65 and cannot get it to bind to my x9d plus se. do I need a different reciever, or buy an older radio or should i return it and get the crossfire version thanks

@roccopolifrone8024 2 года назад

Question…I have the BNF 65 Lite….no micro USB to connect to Betaflight….it binds the my Taranis x7 without issue….I ordered the D8 protocol version. A RU-vidr says to turn off the External RF on the Taranis x7 that by doing this my radio with sync with FC….what’s your thoughts? Thanks Rocky

@DRTOLLZ 4 года назад

If the lens on the camera is flat then I also have the same one on a new beta65s lite. I have two of these. The first I got has a more traditional lens that tapers. The new one that is flat goes black and white only when there is too much light. When there is less light, it shows colors again. Really weird! But all in all the 65s lite is crazy fast for indoor flying!

@Rich-TeaFPV 4 года назад

I think the true aio board (fc, esc, rx and vtx) is definitely the way forward 👍👍

@legendarypot8oanimates160 3 года назад

Maybe, if the vtx in the FC can do 100 or 200mw and the Rx had long af range then that would be my dream aio, maybe in the next few years or so.

@FilipRadelic 4 года назад

Mobula7 issues were never really resolved, people still have issues with new Crazybee boards to this day... So I would be really cautious about preordering something with a new Crazybee board that has another component integrated (vtx). You can get the Meteor65 down to 21g or less quite easily by replacing the the heavy camera mount+canopy with one of the light weight 3d printed mounts and the vtx antenna with a simple monopole. I would definitely recommend 19500kv version (or even the one with 0603 motors) to most people though, these 22000kv are just insanely overpowered for general whooping. As for the connector, I put it on my Tinyhawk and replaced the connectors on some old 450mah batteries that I was just about ready to throw out and I am happy to report they're almost as good as new. Might be hard to tell with 300mah or less, but on 450+ it is definitely very noticeable! Overall out of these 3 (Meteor65, Mobula6 and NBD brushless) I'd recommend the Meteor65 as it's the only one that did something genuinely different from what we've had so far + I've had great experience with their products and when they did have that mishap with 85X they took action and changed the board design and sent people fixed replacements instead of sending back same crap that will break again like HappyModel does.

@billfromelma 4 года назад

Howz about those red jst connectors? I switched my induktrix bl over and have been pretty happy. Parallel charge 'em, cheap.

@ChukkR89 4 года назад

look like a great quad. no matter what don't buy a trashcan, mine went through three crazybeef4 boards got fewer than ten packs in the second and third boards.

@WilliamBertarello 2 года назад

Meteor65 - Super smooth freestyle and fixed jaw-washout BF 4.2.9 0802SE 19500KV Motors, 4 blade 31 mm props, Tattu 1S 300 mAh BT2.0, Average flight time: 3-4 min, ---------------------------------------------------------------------------------------------------- Props-out configuration DSHOT 600 protocol 8kHz gyro and 4kHz loop freq. ---------------------------------------------------------------------------------------------------- PIDS (D-min disabled, anti-gravity gain 6) Roll: 65, 35, 55, 90 Pitch: 70, 40, 55, 90 Yaw: 100, 100, 0, 120 vbat_pid_compensation = OFF vbat_sag_compensation = 75 ---------------------------------------------------------------------------------------------------- JESC 48kHz PWM with RPM filtering enabled, Gyro filter multiplier: 1.2 D-term filter multiplier: 1.2 Dynamic notch filter settings: - Q: 250 - Min Hz: 80 - Max Hz: 350

@heroflying 4 года назад

I went against the guy who won the IO Tiny Whoop class race in a race in Virginia, and his 20g Tiny Whoop obliterated my Tinyhawk. He's 4x the pilot I am, but it's also because his craft was more nimble, responsive, and can accelerate so much faster.

@KrotowX 2 года назад

I wish to get this 1S + 2S whoop with 2.4 GHz ELRS and DJI HD FPV video + Nebula Pro picture quality camera at some day.

@KanHazKat 4 года назад

I still can't decide which whoop I want to get for my first one. The Mobula 6 or 7, Tinyhawk and Meteor65 are on my radar. I want to be able to fly on 1Ssbut not sure if I want to be able to fly 2s as well. The BT2.0 connector looks like a better deal than the old PH2 connector but could it take the place of an XT30 for 2s batteries on whoop style drones? I think it would be okay for whoops but not for ductless style drones. What are your thoughts?

@mhoovair89 4 года назад

Kan Haz check out the NewBeeDrone brushless, it does 1 or 2s

@ddfwaj 4 года назад

Hey JB, did you have any throttle issues on your Meteor? I literally have to push the throttle up to about 50% to get mine to take off. I set my throttle subtrim to 70% and it seems normal now but I have never had to do that before. I checked the ESC and it’s at 1.5 so I am a bit baffled

@Quick-Flash 4 года назад

With EmuFlight and jesc running at 48khz i've seen some whoops gain over a minute of flight time.

@Cre8ionz. 4 года назад

HOLY MOLY

@adamlhotak8180 4 года назад

Which firmware version were you flashing and on which board?

@h2o-fpv623 4 года назад

Cool I want it .thank u for the video I think u should take seriusly u are a champion on fpv and we all want u to win at least me .

@IgorAntarov 4 года назад

Mobula 6 for the win! \\ Joshua we really need a review of it.

@cutemariobrosuk9068 4 года назад

rep 4

@M-H433 4 года назад

So why dont you review it for us please

@spartan-fpv6936 4 года назад

Gday JB, you won a whoop race yay!! nice job great review yay you won a whoop race!!!! Do you think that its necessary to change our 1s batterys to the new connector? I dont race just cruze around the house and outside Yay you won a race!!! love your work mate.👍🛸

@mobilechaosyt 4 года назад

Is there a EmuFlight Project Mockingbird for these?

@Twittertechnews 4 года назад

Hi Joshua: could you be so kind to publish the screen captures of the PID and Retroprofiles that you have used for your tests? I fly with a BETA FPV 75S, but I struggle a lot flying indoor: my PID settings (I think) they are too high or too low and I woudl really appreciate a good reference for the indoor set up from you! Tips from other guys in the chat are more than welcome !:)

@hadeiy 4 года назад

joshua, i got your cli setting, and it set dshot 600 in this meteor, is it more agile ? because on oscar liang, tells to put it on dshot 300

@trevorimpulsebuyguy6398 3 года назад

Great video and great racing! Gotta go, it's taco time

@Goozoo965 3 года назад

I am having issue with props popping out as well. What is the model number of those props?

@TheGrosneuftrois 4 года назад

I like this new battery connector! but for stealing indoors eachine uk.us 65 and well enough!

@marcusmartinez1584 4 года назад

Beebrain brushless is still the most superior brushless whoop that I can recommend. It has 4 minutes + flight time and that’s semi aggressive flying.

@mhoovair89 4 года назад

PMB has been known to use 4 blade gem fan chopped down to 2 blade, might be a solution?

@adamlhotak8180 4 года назад

What were your rates?

@kschlagel 4 года назад

Can you please review the 19500kv one

@CallowayVisuals 4 года назад

Taco time! I support this message.

@bewing77 4 года назад

My biggest problem with the BT2.0 is that from my experience, BetaFPV batteries are among the worst I’ve ever had. Bought a pack of 8 of them with my Betafpv 65x 2s and they give less flight time at a rating of 300 mah than I get from TBS 240 mah packs. Maybe if they’ve sourced better cells for these BT ones. What I find works really well is replacing the connectors with 0.8mm gold bullet connectors, but that only works with packs that have wires of course.

@MickRatanapanyo 2 года назад

JB, bought one! Would Meteor65 suffer much performance loss if I changed that BT2.0 -to- PH2.0 and run CNHL 450mAh 1S batts? Thanks!

@JoshuaBardwell 2 года назад

A 450 mAh pack is going to be a lot heavier on a 65mm. I think you definitely would notice the weight.

@MickRatanapanyo 2 года назад

@@JoshuaBardwell Yes i did.. and it's late here in Sydney Aus, so I haven't had the pleasure to take her through the courses yet. Hopefully tomorrow Thanks JB this was an exercise on keeping my quads, batts, chargers, systems, backpacks, etc.. super light weight and compact.. meaning I needed to simply & standardize as much as I could.

@davidwong5104 4 года назад

12:54 yes very secured connection, very easy to slide in

@davidwong5104 4 года назад

Slide it in

@demiquadfpv3333 4 года назад

What do we think the best quad for medium garden racing with prop guards, that could be run inside 1/2s tinyhawk? I guess this couldn't handle light breezes?

@Dragonfly35RacingTeam 4 года назад

It isn't the greatest in the wind but I flew mine in 20-30mph wind today and it was as stable as I could possibly imagine it being. Obviously not ideal and I didn't have a ton of control. But it flew haha

@dubzsquaredfpv7171 4 года назад

The Mobula6 has its VTX integrated into the FC, so I feel like that might be a significant difference. Also, the Mobula6 is using a monopole antenna (just a bare piece of stiff copper) for the VTX antenna instead of a shielded, heat-shrinked dipole. All the reviews I've seen of the Mobula6, it has significant jello issues and black lines in the video feed. I'd take the Meteor and swap out the camera mount and canopy for NewBeeDrone's goober canopy, and switch out the props to NewBeeDrone Azi's. That'll drop a couple grams right there. If you're sadistic and want to direct solder the motors to the FC, there's another gram and probably some performance improvement. Also, NewBeeDrone's BeeBrain Brushless is 2S capable, whereas the Meteor and Mob6 are 1S only. NBD is releasing a 1S brushless under their Hummingbird product line and it'll be cheaper than the BeeBrain.

@Monolize 4 года назад

directly soldering brings huge performance improvement. also enhances your flight time

@chrisstokley7687 3 года назад

T A C OOOOOOO TIME!!!!!likes the new connector.. :>)

@Clif_Brown 4 года назад

Nate Payne/Mr Shutterbug says to use the TinyWhoop/myLipo 333mah 1S for best Meteor65 performance and flight time. Unfortunately TinyWhoop is out of stock on these, plus you have to convert them to BT2.

@junebugpetty7386 4 года назад

cybervid07 I converted some Tinywhoop 333 batteries to BT.2.0 I also converted some 350 GMB batteries and changed the motors to 19000 and I changed the VTX to a TBS and the camera and it only added 1 gram and it flies great. I get 3:30-4:00 going pretty fast in the house.

@Clif_Brown 4 года назад

@@junebugpetty7386 Wish Tinywhoop would get more 333 in stock... I think they perform better than the GNB 350

@universerc7045 4 года назад

What about mobula 6?a new little 65 ripper ?

@DJOetken 4 года назад

I've had such bad luck with beta fpv products 🙁. The meteor sounds enticing, but I'm scared to buy from them again.

@Monolize 4 года назад

to the motors. i have both, 22kkv and 19,5kkv and i have to say they suck both pretty much alot of juice. friend of mine got the 22kkv with every trick in the book to around 2:40min flight time. the 19kkv will have 4 mins, but also with every trick in the book. so you have to resolder a better batterycable, 22 awg is not enough, 20awg will be good and you have to solder the motors directly to the board. then you will advance. but even then every solderjob has to be rocksolid to not waste efficiency on the long run (even when the betafpv one have real bearings instead of bushings, the magnets on those motors are way to crazy. like the 3BHobby 18kkv, they are hard on your battery. i get 2:30min with 260mah and 19,5kkv)

@MrJoris666 4 года назад

What about the old red jst connectors?

@mandarin1257 4 года назад

Yeah, those are great!

@davidwhittle8402 4 года назад

Hi Josh, can you tell me why my flight controller is only reading 2 volts when plugged into the computer and only goes up to 4 volts with an 11.1 volt battery plugged in. The ESC is reading 11.1 all around so I'm assuming something is wrong with the fc? Any help greatly appreciated, thanks.

@JoshuaBardwell 4 года назад

Check the voltage scale in Betaflight but if it's that far off it's probably damaged.

@Cre8ionz. 4 года назад

Anyone knows where I can get plastic / Nylon Motor Screws ? Maybe from a German store ?

@davidwong5104 4 года назад

Why does my props always touch my props guards, how do you fix that, it is soooowannoying

@mikej8940 4 года назад

i just brought my hdo 2 bundle through your affiliate link

@vampcaff 4 года назад

The 2s is too much juice for tight indoor coarses. Not sure if it has much to do with connectors or even the whoop, you're just a damn good pilot.

@adamlhotak8180 4 года назад

And Pids

@dreadpool9648 4 года назад

Looks like a great whoop but you won that race with pilot skill. #fastestfpvpilotsinMerica...knoxvillefpv

@yamie8548 4 года назад

This is the second year we rent a big gym every week and race whoops and 2", alot of us are on xt30u because it's so much better than jst The BT2.0 looks good, but is worth its price? On the other hand, we got a wide range of lipos and the worst of all are betafpv ;)

@aldenhauser9555 4 года назад

Yamie ur not supposed to use the bt2 with anything other than 1s btw. And on a 1s whoop, xt30 is really heavy

@yamie8548 4 года назад

@@aldenhauser9555 Yes you are right, and I would never consider XT30u on 65mm, BT2.0 might be an option there But then again on 75mm XT30U isn't this much Last winter I converted all my JST 1S to XT30U fpv-racing-forum.de/thread/9766-brushless-micro-1s-umbau-von-jst-ph2-0-auf-xt30u/ In short +2g, voltage increased by 0,4V under load and max amp from 8A to 10A Also my hover throttle changed from 68% down to 50% But the most important thing, I didn't have to change those JST every second week, because they were worn out BT2.0 f+m weight is 0,6g, while XT30U f+m is 1,7g, so it's 1g difference If BT2.0 perform as good as XT30U they are very good for 65mm but on 75mm? I usually use 550mAh 1S on 75mm, I also have some new 300mAh but I only get around 90s racing form them, and they lack a lot of power : (

@Cre8ionz. 4 года назад

@@yamie8548 thx for this Information ! [MFG - EineCrew Hannover]

@Cre8ionz. 4 года назад

Hey ! kannst du die XT30 Kappen für die Akkus aus deinem Umbaubericht auf Thingiverse hochladen ? oder mir anderweitig zukommen lassen ? Kontakt wäre z.B. über Instagram - EineCrew_FPV Direktnachricht.. Und dann Emails tauschen oderso...... Mit freundliches Grüßen EineCrew - Hannover

@yamie8548 4 года назад

@@Cre8ionz. Sorry ich pflege mein Thingy nicht, hab alles bei Fusion, aber da kannst du es auch runterladen :) a360.co/36tPqbh Je nach LiPo passt die aber nicht

@pksteffen 4 года назад

Switched back to NBD brushed because it was faster than my brushless. But depends on the course as you pointed out at the start. That was a long fast course as opposed to tight technical.

@ProjectMockingbird 4 года назад

Yup... on most courses I race, my 19g silverware with plaid brushed does just fine. As Vanover showed us all at the TW Invitational, smooth beats light and faster any day

@unacceptableminority7101 2 года назад

Watch the 19500 kV version has bushings not bearings.

@CraftySmurf35 Год назад

Hey Joshua ! Which ESC /Motor protocol to select for the motor output for Betafpv Meteor 65 in Betaflight ?

@JoshuaBardwell Год назад

Probably dshot300.

@CraftySmurf35 Год назад

@@JoshuaBardwell Ok I selected DSHOT300. Then I tried the motor test and they didnt spin. Does that mean I bricked the FC ?

@JoshuaBardwell Год назад

Try turning off bidirectional dshot.

@CraftySmurf35 Год назад

@@JoshuaBardwell Unfortunately, that didnt work either. I got this yesterday and its been a pain to get this working with the LiteRadio 2SE.

@JoshuaBardwell Год назад

Are you sure that Motor Protocol is actually your problem? Do the motors spin using the sliders in the Motors tab? If so, then motor protocol is not the issue.