Icom IC-9700 with the RS-BA1 software. Remote Control!

Подписаться 58 тыс.

Просмотров 21 тыс.

50% 1

Step by step instructions on setting up the Icom IC-9700 radio for use with the Icom RS-BA1 remote control software.
⏱️TIMESTAMPS⏱️
0:00 Icom IC-9700 with the RS-BA1 software. Remote Control!
0:35 Icom IC-9700 Network settings for remote control with RS-BA1
03:54 CI-V settings for the Icom IC-9700
05:46 Installation of the RS-BA1 software
07:20 Configuring the Icom Remote Utility Software
12:08 Configuring and controlling the Icom IC-9700 from the RS-BA1 software
15:42 Using the Scope function
16:35 On Air test
✅ Subscribe to Ham Radio DX! bit.ly/2lvUGsD
💰 Support this channel: www.hamradiodx.net/donate 💰
🎥 Watch our most recent videos here: / hamradiodx
RS-BA1 Manual:
www.icom.co.jp/world/support/...
"The RS-BA1 allows you to use your ham shack at a distance, whether you are in another room in your home or in another state. As long as you have internet access, you can get on the air"
www.icomamerica.com/en/produc...
How to Update Firmware on the Icom IC-9700
• How to Update Firmware...
Does the Icom IC-9700 still drift??? NEW Firmware Tested!
• Does the Icom 9700 sti...
Icom IC 9700 GPS LOCKED! Weak signal review by Rex VK7MO ✅
• Icom IC 9700 GPS LOCKE...
If you enjoyed this video help others enjoy it by adding captions in your language - ru-vid.com_cs_p...
#HRDX #IC9700 #Icom
Ham Radio DX on Facebook: / vk7hh
Ham Radio DX on Twitter: / hamradiodx
Ham Radio DX on Instagram: / hamradiodx
hamradiodx.net/
If you enjoy this content and would like to support this channel, please consider using the below Affiliate Links for purchases:
Amazon: amzn.to/32mMBY0
eBay: ebay.to/2LVvhFE
Prices do not change for you, but this channel will receive a small commission on all sales.

Наука

Опубликовано:

28 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@JP-rt1to 2 года назад

This is a great video when you are using a in house desktop or laptop to access the radio but didn't work once I was away from home. Additional settings are required; The solution after a lot of additional research was to find the IP address of my router connection to the internet from my home to the outside world. Also, specific router firewall settings must be changed to allow port traffic through the router. 50001-50003 are the defults. Then "Total Success" Instead of using the IPADDRESS of 10.x.x..... Use the one that connects your router to the outside world. To open the UDP ports to the outside world, google your specific router's method to open the ports. This can be overwhelming and confusing but take it one step at a time; this video contains most of the settings you need; just a little more to move from the 'local' network, to the 'global' network. Great video. Thanks.

@johnratcliffe6438 4 года назад

Can this software be used in a non-remote setting to transfer the waterfall and bandscope to a TFT next to the transceiver? Thanks for the upload. *Edit* Apologies, watching further I guess that'd be the 'Setup for a Local PC' option?

@BryanGrigsby Год назад

How do you operate the software with the sub band?

@vivelelaic6367 3 года назад

Do you know if this software can be used (same not totally) an ICOM R9500 ?

@SV1RXI 3 года назад

so we set the software to radio and pc ,the same software i install it to my lap top and take the laptop with me to my office and make calls?

@ReflectingMe2024 4 года назад

Very interesting - I am getting my 9700 tomorrow - can't wait. So, quick qn, are you able to resize the Spectrum Scope window?

@HamRadioDX 4 года назад

In the software, no it is a fixed size

@ReflectingMe2024 4 года назад

Ham Radio DX that’s a shame. Would be nice if it were able to be enlarged.

@mikegianfrancesco8280 4 года назад

I have the 9700 problem I have a Mac but the internet I have is wifi which is given to me for free but no router anyway I can get around this by doing internet sharing

@davidmusselwhite40 4 года назад

I had hoped that you would show the correct settings used so that you could use your radio "remotely" ie from other than your house

@HamRadioDX 4 года назад

The settings are exactly the same. The only thing different is port forwarding the three default ports 50001, 50002 and 50003 to the radio's IP in your router. Because there are many different routers (and because mine is an enterprise router), I couldn't show properly how to do this as it will vary from model to model but the basic methods are as above. Keeping in mind too you will need to know the IP address of the "remote" side or have a Dynamic DNS name. All this is covered in the Icom RS-BA1 manual

@HamTechRadioScannerDrones 3 года назад

Hi -have you done this on the 705 ?> thanks - Andreas

@HamRadioDX 3 года назад

Not yet but it is on my to-do list

@hellmutl.2937 3 года назад

Thank you for this video. I have a question. After I use the 7300 or the 9700 remote, it is not possible to use the microphone, there is no sound. Any idea?

@HamRadioDX 3 года назад

When you exit the RS-BA1 software it will default back to a different MIC setting. You can change this in the software. I think it's in the Connect setting, making sure you select MIC when exiting software. It may even be in the bottom right hand corner MIC SEL. In any case, check in the connectors menu of the radio and see what DATA OFF mod is set to. It should be MIC, not USB

@hellmutl.2937 3 года назад

@@HamRadioDX Thank you, I will try it. 73

@mojostew 4 года назад

So If I understood this correctly, a 'static' IP address is not needed? Great video btw Hayden. Thank you 👍

@HamRadioDX 4 года назад

A static internet IP address is not needed, however if you had a dynamically changing internet IP then you would need to know what it was changing too, or alternatively run a DNS updater with a DNS hostname provider that will automatically stay updated as the IP changes. Internally in a home network the IP rarely changes unless the radio for example was switched off for an extended period of time and the router allocated that IP out again to another device.

@josephholmanog7dog0doj0dan3 3 года назад

@@HamRadioDX How does Icom say to do with this? Or, how do you do it more specifically? I will want to use it away from the house.

@Ninja3986 3 года назад

How to configure a remote pc for the radio ip (server)? A simple dns?

@HamRadioDX 3 года назад

Yes either a static IP, no-ip or similar DNS name

@GerardWassink 3 года назад

Hi there. I can see that the ‘7300 bands’ are geyed out. I happen to have both rigs; when I connect them both, would the software automagically switch between the two?

@HamRadioDX 3 года назад

Yes. You can only have one radio connected to one instance of RS-BA1 at one time. I’m not sure if you can run two instances at the same time, I’d have to test. But yes when you select the 7300 in the menu it will change automagically :)

@GerardWassink 3 года назад

@@HamRadioDX It would be nice, wouldn’t it? And not all that hard I presume, after all, the radio’s bands do not overlap...

@user-eo6vw5bk5u 2 года назад

Good job pro did you try join from Phone

@USBP29 День назад

I’m still confused. Do I need a computer running at the house or will the radio do it with just a CAT cable?

@HamRadioDX День назад

The radio will do it with the CAT cable.. it has a server builtin. You'll still need a PC to run the software though to control the radio etc

@USBP29 День назад

Do you need a static IP address from your ISP?

@HamRadioDX День назад

No, you can use a dynamic IP and a Dynamic DNS name

@njjensentube 2 года назад

Hi ... thank you for very helpful information/video as usual.... I was wondering if you happen to know if you in some way can get the s-meter data into a txt file on your computer ? Thanks Niels OZ1CGQ

@HamRadioDX 2 года назад

Hi Niels, Not that I know of no, sorry. What were you looking to do, get the log of the S-meter?

@njjensentube 2 года назад

@@HamRadioDX Ohh thas too bad ... and you are right i am trying to get a log of the s-meter as function of time ... are you familiar with any other hardware that can provide that function ? maybe SDR ... hope to meet you on the air some day, that could awsome ... I actually heard and worked some VK's yesterday and also ZL on CW good news for DX .... I am an early retired RF ingeneer who loves to design and build antennas ... favorite is MMANA-gal great tool .... so my s-meter data request is a project trying to veryfy MMANA results. Thanks for a great You Tube channel

@HamRadioDX 2 года назад

@@njjensentube I'm not familiar with other hardware that can read such data sorry. Perhaps someone in a forum or Discord server might have more of an idea on that one. Hope to work you on the air someday soon, thanks again.

@njjensentube 2 года назад

@@HamRadioDX I figured it out ... RSP1A can do it ..... with SDR PLAY ... were you on 20meter this morning ? ... both VK and ZL made it in to Danmark

@hs0zcw 3 года назад

screen says "connected" but can get to function beyond this point, why?

@omrodo 4 года назад

we wait for android version !

@Mr_Meowingtons 3 года назад

yeah for real if im paying $150 for this software would be nice to add android

@greattime007 2 года назад

Hi! i have a icom ic-9700 and the rs-ba1 version 2 software. A clean PC with the Remote software. No Firewalls everything is open for testing. From outside no connection. Inside the LAN no connection. Seems that the IC unit don't want to setup a connection. Settings in the icom are alright?? Tried many things but no connection. Any idea? have someone a backup file from a ic-9700 unit with tested settings for remote? thanks

@HamRadioDX 2 года назад

If you have no connection inside the LAN, I’d be doing a port scan on the 9700 IP for the ports the UDP ports it uses to make sure they are active. If they are then check the client settings. Also maybe check the user and password is correct

@greattime007 2 года назад

@@HamRadioDX when i do a portscan they are closed not active or open?

@HamRadioDX 2 года назад

@@greattime007 they should be open if the server is running correctly

@greattime007 2 года назад

@@HamRadioDX after ling testing there was an option in the 9700 check network.. should be ON.. Thanks for the support

@Sparky5 3 года назад

My RS-BA1 crashes when I try to transmit and I have to power cycle the radio. Not happy with the software at the moment.

@HamRadioDX 3 года назад

Hi Chris, Sorry to hear that. I haven't had any issues with the software my end. Have you tried a different PC?

@Sparky5 3 года назад

Found the issue! I removed a conflicting driver and it's not crashing now but now there's something else.. even though my MOD shows audio when I speak, the audio doesn't go out when I key.

@falsedragon33 2 года назад

I'm quite disappointed in how this works with the 9700. If you put the radio in SAT mode, nothing works. I have yet to be able to see both VFO's at the same time. Its only use is to create another virtual COM port with the Icom Remote Utility.

@AndrewScott-vk3bq 4 года назад

If only it didn’t drift :)

@HamRadioDX 4 года назад

Mine won't soon!

@AndrewScott-vk3bq 4 года назад

Ham Radio DX early released ic9110/9710 woooo!!

@wolfgangHB9RYZ 4 года назад

Hi All - Im looking for a video which is showing how to use the latest RS-BA1 using SAT-Mode for the QO-100 remote operation. Currently I'm using RS-BA1 to send remote and listen on the Goonhilly WebSDR. 73 de HB9RYZ www.hb9ryz.ch