No video :(

INAV 7 ON ATOMRC DOLPHIN - MORE BEEPS!

Подписаться 4,2 тыс.

Просмотров 3,8 тыс.

50% 1

Running INAV 7 on my AtomRC Dolphin.
Buy Your Dolphin Here - atomrc.com/?re...
Use this COUPON CODE to save $10 Off YOUR ORDER - JeffDoesThis
------------------------------------------------------------------------------------------------------------------
TIBERIUS CREEK RUN - ATOMRC DOLPHIN - • TIBERIUS CREEK RUN - A...
Let's go for a 3.5mi/5.6km cruise and test to see my MAX range.- • Let's go for a 3.5mi/5...
AtomRC Dolphin #2 - My New Setup - INAV SETTING, MODS & ACCESSORIES AND CENTER OF GRAVITY - • AtomRC Dolphin #2 - My...
AtomRC Dolphin 360 Video! - • AtomRC Dolphin 360 Video!
RC PLANE LED LIGHTS! HOW TO INSTALL AND WHAT YOU NEED! - • RC PLANE LED LIGHTS! ...
ATOMRC DOLPHIN PID TUNING! BETTER ANGLE MODE & LAUNCHES - BEGINNER FPV PILOTS - • ATOMRC DOLPHIN PID TUN...
ATOMRC DOLPHIN MOTOR MOUNT UPGRADE KIT - • ATOMRC DOLPHIN MOTOR M...
ATOMRC DOLPHIN - FLYING IN 30+MPH WIND! - • ATOMRC DOLPHIN - FLYIN...
AtomRC Dolphin INAV AUTO LAUNCH SETTINGS & MORE, BLHELI ESC BRAKE SETTINS & MORE! - • AtomRC Dolphin INAV AU...
AtomRC Dolphin Upgrades & 3D Printed Parts! DO THIS FIRST! - • AtomRC Dolphin Upgrade...
-------------------------------------------------------------------------------------------------------------------
MY ATOMRC DOLPHIN GEAR, PARTS, 3D PRINT LINKS AND MORE!
Plane
AtomRC Dolphin RTH Model - atomrc.com/col...
Battery
ZOHD Lionpack Max 21700 4S1P 5000mAh 14.8V Li-ion Battery - www.getfpv.com...
Video System
DJI O3 Air Unit - amzn.to/3rNBA3D
DJI FPV Goggles V2(Renewed) - amzn.to/46i2LCQ
Pan Servo - fpvdogfight.co...
RC LINK
Transmitter - RadioMaster Boxer 2.4G Remote Control ELRS 4in1 - amzn.to/3LPDBDv
Receiver - RadioMaster RP3 ExpressLRS 2.4GHz ELRS Nano - amzn.to/3rG9FCJ
Receiver -BETAFPV SuperD ExpressLRS 2.4GHz V3.0 Diversity - amzn.to/3Q74God
RC ACCESSORIES
ADRESUNO WS2812B LED Strip - amzn.to/3rXD4bI
LED Strip Light Connectors - amzn.to/3rXsqBS
RunCam Thumb FPV Action Camera - amzn.to/3M9MgRj
3D Printing Links
AtomRC Dolphin - Motor Mount Upgrade Kit - www.thingivers...
Walksnail V2 VTX "Tray" for Dolphin - www.thingivers...
DJI O3 AirUnit 20mm and 25.5mm Mount - www.thingivers...
DJI O3 Lens Cover - www.thingivers...
AtomRC Dolphin v1.1 !DJI O3 mount & Scoop! - www.thingivers...
RC Hatch Latch - www.thingivers...
Atomrc Dolphin ESC cover (low drag + high airflow) - www.thingivers...
Atomrc Dolphin cubre servo - www.thingivers...
eBay Motor Mount Upgrade Kit - www.ebay.com/i...
3D Filament Links
GIANTARM TPU 95A - amzn.to/3LKZq75
eSUN PLA+ - amzn.to/45lrbdp
MY Building Supplies
Creality Ender-3 S1 Pro 3D Printer - amzn.to/3ZHh7dw
Assortment,M2 - amzn.to/46kJ79e
Assortment,M3 - amzn.to/3ZHNnNu
20 Pieces 3-pin Servo Extension Cable - amzn.to/46CZMok
HJ Digital Servo Tester - amzn.to/3Mckd3N
300 PCS 3:1 Ratio Heat Shrink Tubing Kit - amzn.to/3RKv5cw
Hakko FX888D-23BY Digital Soldering Station - amzn.to/3F5ew3q
2.54mm Right Angle Male Header Pins - amzn.to/3LTafE3
4P Dupont Female to Female Harness - amzn.to/3LJWMyw
KOOWIN 300 PCS 3:1 Ratio Heat Shrink Tubing Kit - amzn.to/3tAlPgZ
-----------------------------------------------------------------------------------------------------------------------
DISCLAIMERS:
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@Streetreaper89 8 месяцев назад

cool video. i like that plane and looks like it gets long flight times. im also using inav 7. also if you want to update or backup a FC with all the settings and adjustments previously. just go to the CLI tab in inav configurator. then type " diff all " then hit enter and then copy all text to clipboard and save that in a text doc. and then if you ever need to reflash or copy the inav settings for another FC you can paste the diff text into the CLI and it will reflash all your settings back onto the FC. i make many Fc models and often just copy the diff to each new FC.

@JeffDoesThis 8 месяцев назад

Thanks for the tip!

@edgardoemralino1136 4 месяца назад

Hey Jeff, I'm in the process of building the same plane and same radio transmitter. If you can, can you make a video on how you set your radio switches with all the flight modes and navigation modes. it would help me lot since this is my first Inav/plane. Quad pilot here. TIA.

@JeffDoesThis 4 месяца назад

I'm on it

@edgardoemralino1136 4 месяца назад

@@JeffDoesThis Thank you. i went thru on some of your other videos and i see you are into water sports too. Im a jet ski rider (recreational omly) myself.

@JeffDoesThis 4 месяца назад

Awesome. I'm a Jack of All Trades! Racing dirt bikes, water sports, engines, snowboarding and camping!

@edgardoemralino1136 4 месяца назад

@@JeffDoesThis You got all seasons activities/hobbies.

@mihavuk 8 месяцев назад

Nice video 👍 I somehow have a feeling that a lot of Ardupilot code was merged into Inav. Which is good if it is true.

@b14ckyy 8 месяцев назад

Nope. No Ardupilot code in inav. It's all from scratch.

@BatzBenzerFPV Месяц назад

got this plane last week. already built over the weekend. now ready to fly but scared about hand launch with idle_speed >1000. In here i see, that the prop was really close to your hands... Any hints regarding that? Thanks...

@JeffDoesThis Месяц назад

I have never hit my prop hand launching. It's like jumping off a cliff into water, it looks scary but once you jump you realize, "that wasn't bad at all". The plane will fly right out of your hands even if you screw up the throw and aim down towards the ground. YOU GOT IT!!

@user-otzlixr 7 месяцев назад

Ive been enjoying your videos today, I wished I could have found them 3 weeks ago when i was desperately seeking the info in your videos. I love how you dont assume the viewer has back ground info you are talking about. **Question, I know you run the 5000 mah lithium ion 4s1p on the dolphin. I am hoping to put two 3500 mah 4s1p lithium ion in parallel (making 4s2p / 20 Amp max). Any thoughts on this approach? I have weight concerns, but then i saw you had the 5k mah with a instacam 360.

@JeffDoesThis 7 месяцев назад

I think you would be just fine with that.

@micsherwood4930 6 месяцев назад

Brilliant!

@JeffDoesThis 5 месяцев назад

Thank you

@timothyredden8754 8 месяцев назад

Good video keep up the good work

@JeffDoesThis 8 месяцев назад

Thanks, will do!

@NorthIceMan 6 месяцев назад

Hey Jeff--how did you implement the beeping? What is device that is beeping? did you buy it separately or is it the FC USB Beeper that we hear? Thanks-enjoy your video style!

@JeffDoesThis 5 месяцев назад

No, it's the esc beeping.

@illuminatorix 8 месяцев назад

Hey Jeff, thanks again for your info! May I ask something? I followed your guild for settings from you previous video for the dolphin, do we keep these settings? (I only ask because my Dolphin is under build so I have no idea how it flyes).

@JeffDoesThis 8 месяцев назад

Yes, keep those settings. That's what I did.

@raffman4266 7 месяцев назад

What is your esc motor prop battery setup bro?

@JeffDoesThis 7 месяцев назад

I am running the stock Dolphin RTH Model Motor, ESC and Prop as it is shipped from AtomRC. Battery is the ZOHD 5000 Li-Ion 4s

@raffman4266 7 месяцев назад

@@JeffDoesThis Thanks for the reply!! Happy Flying!!

@YT-qp3xw 4 месяца назад

Hello jeff...may i know what is the weight if your aircraft?

@JeffDoesThis 4 месяца назад

I have changed my setup since this video but I think with the ZOHD 5000 4s Li-Ion it was 1,100 grams. I would look through some of my other setup videos and I believe you can I find it.