Incredible Engine Build - Suzuki Z400 (Problems Encountered)

Подписаться 238 тыс.

Просмотров 46 тыс.

50% 1

Building a Suzuki LTZ400 Engine From the Ground Up! (Problems Encountered)
#suzuki #4stroke #restoration
Thank you for watching my video! If you enjoyed, hit the like button and consider subscribing 🤘😎
My eBay Store - www.ebay.com/u...
PARTS/TOOLS IN THIS VIDEO - (These links may be affiliate links that I get a kick back for; there is no added cost to you)
Bench Top Mat - amzn.to/3THyWqa
Bench Tray - amzn.to/3J4lA2q
Crank Install Tool - rb.gy/pf0f36
JIS Screwdrivers - amzn.to/3J88K35
Lube Tube - amzn.to/3U5O6qv
Anti-Seize - rb.gy/1ktqr9
Torque Wrench - amzn.to/3yc4eyi
Plastic Razer - amzn.to/4b7OXxf
Billet Basket - amzn.to/4dv6hxI
Clutch Holding Tool - rb.gy/5bi4rx
Mini Dremel - amzn.to/3WxVBsb
Burr Set - amzn.to/3wgj3iY
Mini Sanding Drum - amzn.to/3Uwsenu
Mini Scotch Wheels - amzn.to/3wCtRYB
Mini Wire Wheels - amzn.to/3UT1iyv
M18 impact Driver - amzn.to/490VY1N
M12 Impact Driver - amzn.to/3ORNRN5
SPONSORS/COMPANIES I TRUST
⬇️ USED PARTS & REBUILD SERVICES ⬇️
Power Sports Nation - www.powersport...
⬇️ OEM PARTS ⬇️
Partzilla - www.partzilla....
⬇️ POWDER COATING ⬇️
Bonehead Performance Coatings - boneheadperfor... (Mention my name and get 10% off)
⬇️ VAPOR BLASTING & ZINC COATING ⬇️
MotoBlast - www.njvaporbla...
⬇️ CYLINDER RE-PLATING ⬇️
Millennium Technologies - millennium-tec...
⬇️ PREMIUM BAR CLAMPS & THROTTLES ⬇️
Urmosi - urmosi.com/
⬇️ SUSPENSION ⬇️
Rocket Ron - www.rocketronra...
⬇️ CASE SAVERS & SKID PLATES ⬇️
DRW Performance - bit.ly/34dxWEp (Code SABO10 for 10% off)
⬇️ PLASTICS, BEARINGS, SEALS ETC ⬇️
Rocky Mountain ATV MC - bit.ly/32OHs02
MERCH - michaelsabo.com/
Add me on Instagram @michaelsabo350 for Channel Updates!
Companies and Sponsors please contact: michaelsabo350@gmail.com
I own the license to use any and all music in this video.
I own the license to use any and all music in this video.

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 287

@MichaelSabo 4 месяца назад

I wanted to point out that one of my subscribers, @tristan_andrade spotted a mistake I made. In the scene where I cut the gasket for clearance on the pickup coil, it's because I installed it upside down. That gasket probably has that extra material from the factory to prevent people from installing it that way 😂 I get asked a lot how I've learned so much - one of the biggest ways I've learned is from the great viewers that have helped me in the comments over the years. Thanks Tristan, this is definitely going to save me some headache when it comes to starting time and I see there's no spark lol.

@gavincardwell2223 4 месяца назад

Where is the banshee @MichaelSabo

@shaunmeadows2998 4 месяца назад

Do you do specialty part work for people? Need a power valve fixed for my yz250.

@djdubs8544 4 месяца назад

Lol my 660 build turned from a 2 month plan to over a year now😂

@shrugger1 4 месяца назад

I didn't know PSN had that service. See! There's a reason I keep watching.

@Ramer2022 4 месяца назад

@MichaelSabo I need some help. Yz450 timing chain. Trying to remove it and I rounded out the torques head bolt that holds this retainer on. Could I just bend the tab up take the chain out install the new one and bend it back?

@MichaelSaboEXTRA 4 месяца назад

Can you upload faster... thanks

@jebjohn7934 4 месяца назад

Yeah I agree 😂

@GrassGuruGarage4008 4 месяца назад

Something seems a little fishy

@coreywoods2742 4 месяца назад

We all now understand why the delay on this video. Thanks for the SUPERB content. Your builds are second to none!!!

@korbinmcdowell3069 3 месяца назад

Pls build the blaster. Fireball racing long travel front end which take a 18.25 inch shock. Trx450 rear shock. We want to see the blaster built

@TraceHansen-ym7nf 3 месяца назад

I second the long travel blaster now that the z400 is almost done! We need this mike

@MichaelSabo 4 месяца назад

What do you think of the outcome? Thanks for hanging in there with me as we finish this bad boy up! Stoked to get this engine on wheels and see if she purrs 😎 You guys all ROOOCK and I hope you have a great end of the week/weekend. If you enjoyed, please consider hitting the like button and subscribing 🤘🤘🤘

@brokejokeratv5851 4 месяца назад

I think you do amazing job on everything and really appreciate the time you put into your videos and explaining things, I hope you enjoy your new kx250 and God bless you and your family, please keep on kicking ass brother

@hutchdw77 4 месяца назад

Looks great! Nice work.

@eliecersolera768 4 месяца назад

Pick up coil is put on backwards regards with spark when you try to start the engine the pick up needs to point the opposite way😅

@georgecharlenebejarano3299 4 месяца назад

Looks Awesome Brotha! Can’t Wait To See It When It’s Complete. 👍💪😎

@CourtJ_ml9to 4 месяца назад

Anti-seiz on Everything bro

@tristan_andrade 4 месяца назад

What button do i press for a second thumbs up? THIS is how you do a restoration!. You do great work Mike!

@MichaelSabo 4 месяца назад

You're awesome man, thank you

@tristan_andrade 4 месяца назад

The pickup coil is installed backwards that is why the gasket does not fit. The problem is not the gasket @@MichaelSabo

@MichaelSabo 4 месяца назад

@tristan_andrade dude, you're right! I put it in upside down. Thank you lol. Probably would have taken some time diagnosing this when I tried to start it. I bet that gasket is that way to prevent people from putting it in backwards 😂

@RealSuburbanCowboy 4 месяца назад

I have missed the exploding garbage can bit. I love it! Blessing in disguise. You fixed an unseen problem. LOVE THE CHANNEL!

@MichaelSabo 4 месяца назад

Thank you for the love bro! Gotta throw the trashcan bit in there 😂

@danebowen729 4 месяца назад

You are a better man than me. Can't tell you how many timing plug covers on the Z400 that I've had to use a chisel to get it rotating before removing. Anti-seize and you'll never have to deal with that again - and that cover does NOT have to be put on crazy tight! It is not a common leak spot on the Z.

@MichaelSabo 4 месяца назад

Thank you for this info man, I didn't know that was a common thing. I have LOTS of antiseize in there now lol

@alexsuttles7662 4 месяца назад

For a one man show, your videos are just so well edited and easy to watch. Please don't stop making videos!! Just finished restoring my wife's 2003 ltz 400 that her parents bought her brand new back in the day

@samuelpanasyuk2955 4 месяца назад

Hell yeah

@MichaelSabo 4 месяца назад

Awesome compliment man, I don't plan to stop 🤘 Congrats on your restoration!

@red_pickle_49 4 месяца назад

Man, it's been one of my dreams to own a sport quad and watching you go the extra mile with these restorations makes me so happy. Sport quads need to be preserved before manufacturers inevitably quit making them. You do awesome work! Keep the videos coming! 🤘

@MichaelSabo 4 месяца назад

Dude, reading this made my night :) Glad to hear you enjoy my videos and good luck finding your dream sport quad 🤘

@SecondSunofficial 4 месяца назад

Same here, im about to get my first sport quad next week, a raptor 700!!

@Johnbruzzi4234 4 месяца назад

They basically have stopped making sport quads.

@SecondSunofficial 4 месяца назад

@@Johnbruzzi4234 yamaha and honda still make sport quads

@Johnbruzzi4234 4 месяца назад

@@SecondSunofficial Honda doesn’t make sport quads, only Yamaha does

@867diesel 4 месяца назад

i love the repaired case dude . i look at welds as art work . that welder is an excellent artist . i like how people will go above and beyond to FIX something and not just buy a new one . welding those cases isnt the first time people have done that .

@MichaelSabo 4 месяца назад

100% man!

@Everysetcounts 4 месяца назад

Mad Mike mechanics your the best in the business truly helped alot

@MichaelSabo 4 месяца назад

Ah man, there are so many that are better, but thank you my man! 🤘

@jfrickey1 4 месяца назад

Real bike builders repair broken parts to make them better than new.... Great job on the case repair...

@SecondSunofficial 4 месяца назад

Fr I don't see anyone complaining about it

@jfrickey1 4 месяца назад

Not complaining...Ill draw the picture for you....Mike S , great bike builder... great job on the repair instead of replace...

@Cartduckmann 4 месяца назад

If I could attack every obstacle in life with the same dedication, intricacy, attitude, and passion that you do these builds I would be unstoppable. Thanks Mike!

@RC-fu6hg 4 месяца назад

Excellent color choices! 👍 that looks gorgeous! Don’t listen to the anti welded case people. I had an old Honda 350X that I had to weld the stator cover where the drive sprocket is located. When finished you could not see the weld. It reminds me of your case. And boy she came out sharp looking. 👀 great work preserving these classic machines.

@MichaelSabo 4 месяца назад

Glad to hear your success story with the 350X and thank you for the love!

@jacobemerson8015 4 месяца назад

This project may have influenced me to pick up my own basket case LT-Z400 about a week ago😅. It had a bad top end and a cracked case, and needs a lot of love in general. Ended up swapping the the busted case bottom end and another disassembled bottom end with a bent rod, but good cases, with some cash or a good bottom end, just waiting on parts to come end to get started throwing it all back together. Can't wait to see how yours comes out, if time and budget allowed I'd love to do a simular build.

@MichaelSabo 4 месяца назад

Thanks for following the build series and good luck with your Z man - sounds like you're on your way to a nice build 🤘

@matthewf1979 4 месяца назад

If a guy can weld up a 5000hp billet big block Chevy motor, you can most definitely weld up a 30hp quad motor. It’s all about weld prep and preventing warping. Great job saving another one!

@MichaelSabo 4 месяца назад

Hell yea man! Thank you

@isnotaidan6316 4 месяца назад

These videos are gonna help me so much with my z I’ve always struggled to find videos of people installing something or working on them thanks sooo much

@Og_editz514 4 месяца назад

I have 2 ltz's of my own and I've been watching you for the past 4 years and ever since I couldn't wait for you to do the ultimate ltz 400 build ..... man this series is awesome so far.... but we wait to long for you to upload 🫠 but I'm loving it so far man awesome work 👏

@MichaelSabo 4 месяца назад

I appreciate the love man! I am working on a faster work flow to produce more content for you guys - it's a me problem that I'm aware of.

@cannonmead2766 4 месяца назад

This one was freaking good! Still working on my YZ 250 resto. Over a year in the making do to costs and having almost no free time. I love that you share the little BS that guys absolutely WILL encounter when wrenching. I just stripped the hardware for my flywheel weight. And it’s the last piece left for the build. Thought the engine was going in the bike today. But instead I’m replacing hardware and tapping threads. It is what it is boys. Keep moving!

@MichaelSabo 4 месяца назад

It wouldn't be a proper build without a few headaches and thrown tools 😂 Congrats on your YZ, sounds like it's almost time to fire it up!

@joemomma45 4 месяца назад

Just bought an 02 Honda shadow 750 to rebuild for my pops for Father’s Day. Trying to get him back into riding and come out with me on the road. Super inspired by your builds and even the failures 😂. Glad to know even Mike Sabo is human.

@MichaelSabo 4 месяца назад

Glad to inspire you man, good luck with the shadow 🤘

@jeremyneves3130 3 месяца назад

The frustration on the plug. Haha. So real. Been there.

@cadwerks2010 4 месяца назад

LOVE, LOVE, LOVE your channels Michael! You are one of the greatest finds on the internet for those of us that really enjoy this type of thing! I have 2 questions for you: - Can you please show us the process you go through in Photoshop to take a picture of something and how you are able to change colors of individual parts? - Have you though about incorporating an old Yamaha Snowmobile from the 80's? Could be another great way to pick up a bunch more subscribers in a niche market. ...and NOBODY does clear & concise explanation as well as you do! KEEP UP THE FANTASTIC WORK! THANK YOU FOR THE CONTRIBUTION OF ALL OUR PASSIONS!!! "NOT what she said"! .....LOL!

@_UncleBo_ 4 месяца назад

Hell yeah Mike she's coming together phenomenally!! I had the 04 LT quad sport Z and right now I'm restoring a 2003 RM-125

@davidronneberg2643 4 месяца назад

Awesome job bro! That engine looks amazing! I started dying when you came out in the morning after saying good night, you’re a funny dude and I really enjoy and appreciate all the work you put into providing us with high quality content. 🤙🏻

@jjsfitnessgoals4898 4 месяца назад

Man I’ve missed seeing some proper engine/bike rebuilds. Only a few do it like you man I’m serious.

@MichaelSabo 4 месяца назад

Thank you for that man!

@Jmoney92591 4 месяца назад

The build looks awesome, thanks for the blood sweat and tears you put in your videos, It’s appreciated!

@Ramer2022 4 месяца назад

Man I’m watching these videos literally the hours they come out and in the past 2 weeks I’ve been working on a different motor every time. You truly do dedicate yourself to these projects and they turn out really really well. I redid a yfz 450 top and bottom end to start. I tore down a Yz 85 top end and rebuilt it and now I’m on my baby, yz450f. Great work man

@MichaelSabo 4 месяца назад

Thank you for the love man 🤘

@brokejokeratv5851 4 месяца назад

Loving this one, but who am'I kidding I love all sabo videos, wish he would fix my 660

@MichaelSabo 4 месяца назад

You are the man! Thank you for the love. Good luck on your 660 - those can be tricky

@brokejokeratv5851 4 месяца назад

@MichaelSabo yeah I noticed after watching your 660 build lol doesn't look like fun, also will you be doing a quad wars series these year?

@MichaelSabo 4 месяца назад

@brokejokeratv5851 we might be. The Brewers want to do a 400EX vs Z400 series. Looking at September to film so it probably won't be out til Christmas time if we do it.

@brokejokeratv5851 4 месяца назад

@@MichaelSabo ill be waiting and watching along the way

@ps.adv.9851 4 месяца назад

Thanks Michael. Your videos are always very cool. I always enjoy watching them.

@MichaelSabo 4 месяца назад

Glad you enjoy them - thanks for watching 🤘

@akajk2310 4 месяца назад

Thank you so much for these building videos.

@MichaelSabo 4 месяца назад

Thank you for watching them 🤘

@AdventuresOfRogersAndHenderson 4 месяца назад

34:05 “I wanna go in and watch The Matrix” 😂 But for real… the emotional damage of something so minor causing so much headache is ALL too real

@MichaelSabo 4 месяца назад

Lmao, that was real life dude - legit just wanted to be done for the day and watch some TV/eat 😂

@Pjw350 4 месяца назад

This video is priceless. In Sabo we Trust!

@kerm9807 4 месяца назад

Pure class Mate Uk 🇬🇧 following

@SecondSunofficial 4 месяца назад

Hell yeah another video, so hyphed for the final video!

@MichaelSabo 4 месяца назад

🤘🤘

@joecalabro9565 4 месяца назад

Excited to see how it turns out and can’t wait for the XCW!

@MichaelSabo 4 месяца назад

The XCF? Dude hell yea, I have been dying to release that!

@joecalabro9565 4 месяца назад

@@MichaelSabo haha yes! KTM has too many acronyms to remember.

@mikeolson7188 4 месяца назад

Nice work on the mighty Zuke Michael.Spent the better part of my youth working at one of the larger Suzuki Dealers in Illinois,also worked at the suzuki tech training center helping teach some of the Repair classes(assistant instructor),During the winter months,good times forsure.keep up the good work,i enjoy watching your content.

@henriknordeng 4 месяца назад

Well if you can weld an engine block that have 500+ hp and that holds i would say that the huge 30hp engine will be fine. Michael you do what you do brother. Dont worrie about the negative. It is your build and you are the best man to judge what is good or not for your build. Love the channel. Keep up the good work

@MichaelSabo 4 месяца назад

Thank you for the positively and the love man 🤘 I think it will hold too

@lucascady4992 4 месяца назад

Better Help is there for everyone, talk to someone, get your hair cut Hippie! 😂 All in fun, love the channel Mike, keep the Video's coming!! 😊

@MichaelSabo 4 месяца назад

LMAO! I am going to wait until its Conan The Barbarian long 😂

@hennessyremy4970 4 месяца назад

Yayaya baby. Made by Sabo!!! In Sabo we trust!!!!! I like this build. It’s restoration and u took the time out to live things as is. Gives a broke man who only either got the tools and no faith in the repair or a man with good friends a long Saturday nights can get together and get it done. U always wow me and my friends I show the content to. I come home too my. Twins who r 11yrs old watching your vids. My 7yr old daughter loves watching them with me to while she’s on her tablet 🫶🏽🫶🏽🫶🏽🫶🏽🫶🏽🫶🏽🫶🏽🫶🏽 can’t wait till u have the house. The land. And builds!!!!!!!!!!! God bless u !!!

@humpday2267 4 месяца назад

Here’s a tip. You can install those engine plugs at the very end after you’ve timed your engine. Because you have to remove them anyways once you’re reading to drop your cams on the head for timing. I even go as far as leaving the stator cover off and flywheel nut loose until I’m 100% perfectly timed because at least in my experience the timing chain likes to fall off the crankshaft sprocket teeth when you’re installing the cylinder

@CourtJ_ml9to 4 месяца назад

I’ve seen the “red” silicone type u used but noticed it was black so it may be different but the red LEAKS! 3-bond is ALL GOOD FOR ALL non-gasket/gasket (insurance) reeds/intakes etc. mating surfaces. Once u use it and for sum reason have to REMOVE it you will AGREE!!… TO ADD, you should of had Millennium polish the cylinder! It’s so cheap to NOT DO because they do an amazing job

@MichaelSabo 4 месяца назад

If I'm not mistaken, 3 bond makes the Ecstar, Hondabond and Yamabond products - it's 3 bond 1215 I'm pretty sure. Polished cylinder would be cool but not for the OEM/special edition look I'm going for in my opinion 🤘

@jmarcinko1139 4 месяца назад

Hell yeah it’s getting there. Going to be an awesome looking reliable quad. I feel like videos like yours and others are going to help resurrect the sport quad scene and we’re going to see these coming back to the showrooms. At least that’s the dream. ❤ KTM build 😮

@davidstoner27 4 месяца назад

Woot it will live soon

@MichaelSabo 4 месяца назад

Hell yea man!!

@KorbinMcdowel 3 месяца назад

Next builds idea… the blaster! That was my favorite quad you’ve done!

@plexies.6738 4 месяца назад

Hey just thought I’d let you know your videos have got me back into quads recently took a big spell a year ago and was terrified to get back on but your videos and energy have helped me get back into the sport

@Liquorpuss 4 месяца назад

Im sure it will work but damn man. Run those new cases given how nice that quad is lol

@MichaelSabo 4 месяца назад

Eh, it'll be good man 👌

@coltstacey6000 4 месяца назад

Finalllllly waited so long for this

@MichaelSabo 4 месяца назад

Thank you for waiting! 🤘

@lukethedrifterm5578 4 месяца назад

I am jealous of a lot of the things Mike does, but this just blew all the others out of the water.. can’t wait till the day I have time to make a lunch like that. The definition of success

@James-xq6kg 4 месяца назад

Hey Mike, I know you’re not too much in the dirtbike scenes but I need opinion anyone’s opinion is helpful but I just got a 2023 KX 230 R in January 2024 and I am now wondering if I should go out and get a pit bike too cause they look bad fun and I want to kind of divide the hours and both bikes so I can get a little bit more life out of both. They are only 1500 each is a good idea? I’m 12 btw

@MichaelSabo 4 месяца назад

KX230R is a great machine, I almost got one of those instead of my KX250X. I recently started riding dirt bikes weekly - love them. For 1500, definitely the 230 is worth it. No idea on the pit bike, but yes, they're very fun too and great to lend to a friend that wants to ride with you but doesn't have a bike.

@jsvallee567 4 месяца назад

that weld case is 100% fine ! great build once again mike !

@slaterider 4 месяца назад

If it works, is it really a dumb idea? You do you, Mike. 😎👍

@MichaelSabo 4 месяца назад

Facts

@davedoucette1256 4 месяца назад

I really enjoy this channel, I’m relieved that you don’t take out problems that occur along the way. Or the frustration that comes with it. I like this build and can’t wait to see it finished with you.

@wyattguttery9614 4 месяца назад

Great video man, been waiting to see more ltz content 🤙

@MichaelSabo 4 месяца назад

Thanks for hanging in there and waiting 🤘

@martinmartinez8161 4 месяца назад

Quality work, my friend. I can't believe this level of information is free. Thank you.

@cadman9615 3 месяца назад

Place the breaker bar paralell to the work bench and then use your weight to push down. Should be easier than trying to pull the bar towards you. Great vids cant wait to see the finished bike, as i have an 06 in my garage

@dennyvasquez9076 4 месяца назад

Let's go!

@MichaelSabo 4 месяца назад

🤘🤘

@commodore92 4 месяца назад

Tha k god, I needed more of this

@josephperry6822 4 месяца назад

Great job man! I hope that weld works out!

@MichaelSabo 4 месяца назад

Me too haha - Thank you!

@larrysupersport 4 месяца назад

I'm just imagining you finding and hooking up the fog machine for the "make it pretty" shot. LOL. Nicely done Mike!

@MichaelSabo 4 месяца назад

Hahaha, hiding behind the bench with it 😂

@floridatrailrider305 4 месяца назад

Great job staying calm cause I would been throwing wrenches over that timing cap getting seized. Like you said it’s all part of the game. Always have random bumps on the road. Great work Sabo!

@MichaelSabo 4 месяца назад

Dude, it was like 2 hours real time messing with that 😂 Thanks for the love man 🤘🤘🤘

@vintagetrikesandquads4012 4 месяца назад

The crank plug on the Suzukis are notorious for getting stuck--even without sand in the threads. That's why Yoshi made a replacement with a hex head instead of an allen. The one on my LTR has gotten stuck before. They come out easier when the engine is hot.

@MichaelSabo 4 месяца назад

Thank you for the info, I didn't know it was a common thing with these

@DyE0022 4 месяца назад

"this isn't NASA, we aren't going to the moon" is probably something a lot of people needed to hear. Love the content, as always. Keep it up brother

@jmaxim80 4 месяца назад

Mike, I'm with you on the case issue, I don't know if you've ever seen taryl fixes all. But he owns a small engine repair shop, and he has to continually tell people he's working on lawn equipment, not a Saturn 5 rocket. I've worked on motors for 25 years, and I can't tell you the number of piles of crap that have been rigged with all kinds of abominations and the blackest oil you've ever seen. Then the owner fires them up, and they purr like a kitten. People have been too conditioned from watching RU-vid that everything needs to be perfect for a motor to run, and that's the furthest thing from the truth. That motor you built is going to not only run well but that case repair will outlast the useful life of the piston and cylinder. Keep up the great work, brother, your kicking ass and taking names.

@MichaelSabo 4 месяца назад

Awesome comment man! This is what I love to hear - bringing things back from the dead and making things work 🤘

@AllThingsCycle 4 месяца назад

Dude thank you for running the old stock Yosh!!!

@Berm_Blaster 4 месяца назад

I prefer this type of raw building compared to the full tutorial. This shows all the misc crap that happens while building instead of everytning of everything going together with no issues. Appreciate your hard and dedication. Much love and respect from a fellow Miker.

@DoodMangSpeaks 4 месяца назад

I really like that you show the headaches I know they are frustrating but they make great content atleast 😂😎🤘

@chuckfrisoli1170 4 месяца назад

I think it’s great that you fixed the cases and are going to see if it works. It’s easy just to get new cases but that was an interesting project to try and fix it. Yeah you made a lot more work for yourself but you learn a lot when you do stuff like that. I like to do shit like that just to see if I can pull it off. I think it’ll be fine.

@MichaelSabo 4 месяца назад

This is exactly the way I think - glad to hear the positivity on the likelihood of it working haha

@sawyercarlston5105 4 месяца назад

I appreciate how long these videos are, great work like always.

@krudlumpstv7854 4 месяца назад

I fucking LOVE these cases!!!!!!! 😂😂😂 but seriously making parts work that were never supposed to work again is what I’m all about! Absolutely killed this build man and every build you do. Your building skills and video quality is next to unmatched!!

@MichaelSabo 4 месяца назад

Hell yea man! Thanks for the appreciation and the love 🤘

@steve7572 3 месяца назад

Hey man, I went to go put a side fairing on my R1. Supposed to be a 5 min deal. Somewhere in the process I dropped a little rubber threaded piece that holds the fairing on the top side. I had to take the gas tank off, air box, and get under the wiring harness to recover it. 5 min = 45 min all day

@driftlessripper104 4 месяца назад

i love this series its awesome thanks for making great honest content

@germansheperd3250 4 месяца назад

Feel illegal to be this early

@MichaelSabo 4 месяца назад

🤘🤘

@luis___solow 2 месяца назад

Yup time to rebuild my 400

@Alexios9090 4 месяца назад

Hug from Brazil

@MichaelSabo 4 месяца назад

Hug back from the USA

@Cloroxbleach-mp7hv 4 месяца назад

Man Michael I really love your video’s of how you are taking the time and pictures and very high quality videoing I’ve had restored a 2003 white and black z400 had BEST RU-vidr On platform

@josephhermann648 4 месяца назад

It looks awesome I can't wait to see it run!!!!!!!! great job brother!!!!!

@asherbrown6492 4 месяца назад

I love you Mike!!!!

@MichaelSabo 4 месяца назад

I love you man!

@ps.adv.9851 3 месяца назад

The engine looks awesome. Well done. Good video.

@tudor9494 4 месяца назад

keep up the work! cant wait for the final look

@jamesBGgarner 4 месяца назад

More epicness from sabo!!!!!!

@101spacecase 4 месяца назад

Looks good.

@razvanconstantin5956 4 месяца назад

LTZ poweeeer🙌🏻🙌🏻🙌🏻🙌🏻

@MichaelSabo 4 месяца назад

🤘🤘🤘

@FishingUponAStar 3 месяца назад

I dont think alot of people noticed he announced his next project, KTM 350 XCF!? Love the project and videos man!!

@bigcaputo09 4 месяца назад

You ground down the o-ring sealing surface on the timing cover screw. Keep an eye out for water and dirt getting in the stater.

@MichaelSabo 4 месяца назад

The o-ring sits on the tapered portion if I'm not mistaken, which I did not touch. It feels nice and snug and you can feel the o ring compressing towards the bottom but I will keep an eye on it 🤘

@bigcaputo09 4 месяца назад

Oh that's ok then. It's hard to tell on video. Just didn't want it to have a leak on you!

@Clap_Classics 4 месяца назад

Best channel in this niche.

@MichaelSabo 4 месяца назад

Thank you bro!

@timmydavis6624 4 месяца назад

Looks good man 💪

@MichaelSabo 4 месяца назад

Thanks man!

@nicholasmazzone3386 4 месяца назад

Footage is super dope bro, I can relate I’ve been doing a lot of work on my quadsport.

@amateuratvs3716 4 месяца назад

Love the build, man. The Z400 is my favorite atv.

@kawasakikx8093 4 месяца назад

For that sight plug if you ever run into it again give it a decent tap with a rubber mallet and it will dislodge the sand grain and should be able to spin it out

@JackPerry-bq1ib 3 месяца назад

Great video! Now… let’s talk about when you are going to long travel the blaster!

@MxShee 4 месяца назад

Awesome video! Motor looks so clean this Z is going to be so sweet

@Sunspot-19 4 месяца назад

Mike, you aren't alone in having something go afoul... Love the build so far. Good on you for actually employing a torque wrench as much as you do. Guess you and I are detail oriented and like things done without pulling threads out of everything. On another note, are the head bolts torque to yield? If so, never reuse them, always replace them or go with something on the lines of ARP stud kits. Frankly, I have abandoned the use of TTY bolts and invest in the stud kits since they don't allow head lift to occur under high RPM use. Lovely job, Mr.!!

@Lenny_J_88 4 месяца назад

Coming out great Mike 👌🏻🔥

@erikcfishing 4 месяца назад

Best bike builder out there

@700rRaptorLife 4 месяца назад

Another awesome engine build mike 🦾🦾🦾

@joeypooschke7914 4 месяца назад

The GOAT 🐐 does it once again, great job mike.

@asherbrown6492 4 месяца назад

Buy a 300ex!!!!

@MichaelSabo 4 месяца назад

Fun machines! Might do one down the road 🤘

@yanilcruz1344 4 месяца назад

Never seen u struggle on one little thing 🤣🤣 that screw was a pain in a ass

@MichaelSabo 4 месяца назад

Yea man it had me swearing left and right 😂

@masonseubert5428 4 месяца назад

I know your trying to go for all own look but I highly suggest getting a different case saver. Very common for when the chain comes off It goes down and slaps the shifter shaft and breaks the cases. I have personally junked out 2 cases do to this.