Indestructible Prop? Stainless VS Aluminum Mud Motor Propeller 

Awesome video !

Love it lol

Thanks for putting out your videos I am learning a lot since I bought my first long shaft and flat bottom boat

lets see what that stainless prop can do mounted, i give it credit for being able to take two 39's but what about a 54r?i really just wanna see how tough stainless steel props are because i want one for my boat, cant afford it but i seem to be ok with an aluminum prop, shes banged up and might need replacing and we have straightened her back out and made sure shes as smooth as possible, for reference i got a bass boat and props for those are well over what he paid for his because they are much more complex and much larger. not sure how many non boaters watch this channel but boats can be pricy

I made my own short tail out of garbage and a 212cc put it on a 8 foot catamaran I built out of fiberglass and was sliding over 4in flats in Florida without getting stuck I love it

Ye-ye from da Notland! I am so glad I ran across this channel! I love it! Keep up the good work! I think Scooter is probably playing with a short shaft and is just trying to compensate!!

Do you sharpen your props from the backside to bring them back to normal? Does sharpening them help with vegetation?

LOVE YOUR VIDEOS!

Send-it Science is Awesome👍👍

Good job but $110.for a long tail prop yea better but in Thailand, you can buy a whole setup for that, props included.

Awesome video, I’ll definitely be getting me a stainless prop for the surface drive

Hiw are those long tails up in tight creeks and cuts where you gotta turn around?

G'day great video mate. The best Scooter so far 😂🤣😂🤣😂

It's nice watching a fellow Georgia resident do the same stuff I'm into

I love your scooter comments your videos are awesome and by the way I love my mudskipper I love all of these kits I’m gonna get a Beaverdam and an SPS soon for my channel. I Over 150 miles on my mudskipper last summer alone no shit! 125 miles on the Powder River in eastern Montana plus the rest of the summer trips on the tongue River

🤣😂😅😂🤣😂😅 awesome 👏👏👏 thank you very much for your reviews thanks to them I have narrow it down to two kits for my 10 ft Tracker if you have any opinions or advice please let me know God bless oh and before I forget as time has gone by I have learn that is impossible to make every one happy,but is absolutely awesome to make them upset....

Where can I get that bottomlands shirt, I need one

Yes, stainless props will wear better than aluminum. And you proved that. The issue with Stainless vs Aluminum props. Is when you strike the leading surface of the prop at speed. Thats when it is a question of what breaks, the engine, key, longtail shaft or propeller. I always what it to be the key or propeller. Iv'e seen outboards break instead of propellers with stainless propellers. And in those cases the stainless props were deformed and had to be replaced as well. So that's why I use Aluminum propellers. And they are so much cheaper, I can afford to have multiples onboard in case one does break.

need to do a scooter comp! 🤣

Gator tail is a surface drive they don’t make long tails it’s godevil , back water and thier more expensive bc their stronger and will last way longer comeing from someone who’s Owen both I’d pick American mud motors anyday

4th. Great video bud

I wonder if jtgator is scooter?

Sounds like Scooter has “shaft” envy. 🤣

I really want to see what .50 BMG will do to that thing. Jeez it is tough. In my opinion stainless steel props are worth the extra money. These things last forever. We still have the original stainless steel prop on our motor that we got 36 years ago. I could be wrong about that my dad had to replace the shaft because he bent it but I don’t think he got a new propeller for it. Even if he did they still last forever. It’s been over 20 years since he replaced it.

😂 LMAO!! You gotta just love this guy and I bet the neighbors love the crap out of him too😏... oh, and by the way in my opinion, Beaver Dam mud runner rules 👍 .. so far.. keep up the great vids

Bro, since we're so close, distant wise, when I get my boat ready I wanna bring it to you for paint.

I was wondering if you’ve done any speed tests comparing the stainless vs aluminum prop in the same size. I’m coming from the outboard world and you can get more speed out of stainless because aluminum will deflect and change the pitch at higher rpm.

It has definitely taken a beating. That's what she said.

How do these motors work in wild rice creeks? Do they clog up like an outboard?

What do you season your firewood with? I personally like the Montreal Steak.

I kept waiting for the kitchen sink

So you wanna be a scooter.....CANCELLED!

How dare you beat up my wood with your shaft🤣🤦‍♂️

If you ever need extra cash you could take your jon boat and prop and go bury some cable for charter or someone

It be better as bullet proof what do you think.... Haha

"...calm down, we're trying to destroy stuff." I don't know why, but that just struck me as funny. Too bad the camera was off when your Preditor went all angry dragon on you. That there would have been some premium footage. Your next video can be the Predator's post mortem. I'm sure I'm not the only person interested in what went wrong. I'm going out on the limb and suggesting a partially sheared flywheel key. This would be due to the shock pulses from the prop strikes transmitting up the shaft. The F/W key is the first weak link in the chain. The partially sheared F/W key changes ignition timing, causing the not starting problem. I'm guessing that something caused the starter to crank the motor over for an extended period of time. This caused a flooded condition. Eventually, the altered timing caused a backfire, igniting the excess fuel in the intake manifold. It has been observed, that when this series of events happens it can produce some odd noises. The most common noise, mysteriously, sounds very much like the squeal of a young human female. Anyways, so yeah, let's see a post mortem video. I'm impressed with your shaft collection. It's so manly. Probably too intimidating for *Scooter*. BTW; Noice pea shooter. Keep up the good work. Still enjoying your videos, butthurt snowflakes and all.

Great you have a indestructible prop. With a running start you'll be cruising folks lawns. Remember it's STOP, DROP, & ROLL not FLAIL, SCREAM, & RUN.😁

Good to know you can cultivate your yard with your boat, ya know?

You just sold a shit ton of these kits with the stainless prop,,,but what happened to the predator,,I think I seen the zip tie trick,,did you have to sting of a fuel pump on it or what

Lol scooter needs a cooter….

HEY THAT'S MY COOLER!!!!

Usless on a Boulder under water

I would love a beaver dam kit but I don’t have the capital. And as I remember in that comparison you said that you wouldn’t mind running any of them, but you liked the beefy build on the beaver damn. That sally needs to get his panties out of wad😂

My God, the glory of the shaft speech....

Where do you get your alluminum props from ?

Snowflake comment lol, I said the same as you in my video they all are going to work, it's impossible to please everyone. Personally, I think the SPS with the heaviest but precision stainless steel inner shaft and HQ bearings on motor vertical pivot points and high pitch special props are far superior, and wish you covered that but no one is perfect, still a good video.

Stop wasting your time and break out the dynamite....🤣🤣🤣

Just give it to WhistlinDiesel......Then we will know.....

It would seem there's a scooter out there obsessed with shafts. Btw, if ya wanna chance to try and break a prop in a real world scenario, trying taking a run up the Appalachee river around Buckhead Ga with a loaded down boat. I was able to beat the heck out of one of mine when we went fishing up there last week. We put in at Swords and I started nailing logs and debris before we were even at the I-20 bridge, not to mention the logs our boat jumped over. I would recommend you use your shortest shafts though, it gets kinda tight and slick up in the river and the shorter shafts fits much better up there.

How well have the non weld Jon boat floats been doing so far?

Just wacking the shit out of it.

Your standing in a door way.

Quitter