Mud Motor Review 2021 || Swamp Runner vs Mud Skipper vs Beaver Dam

Подписаться 42 тыс.

Просмотров 202 тыс.

50% 1

Mud Motor Review 2021 || Swamp Runner vs Mud Skipper vs Beaver Dam
In this video we are taking an in-depth look at the three major mud motor kits that you can buy in the US. This longtial mud motor review will cover kits from Swamp Runner SPS, Mud Skipper CKS, and Beaver Dam Mud Runners CLP. Each kit will be tested side by side for comparison to see which is the best that longtail mud motor kit. We will be looking at the construction, materials, cost, and function of each of these longtail mud motor kits. Follow along and see which one is the best mud motor kit for you and your needs. This it the most up to date review for 2021 and shows all the newest kits each of these companies have to offer.
Big thanks to my camera helper Josh! Go check out his wood working channel:
/ @patriotshieldmillwork...
Watch the entire Project Bottomland Bateau Series:
www.youtube.com/watch?v=HMJQU...
Check out great deals and discounts from our channel sponsors:
10% off promo code for Freedom Lube, The most American oil you can buy!
Visit www.freddomlineproducts.com
Use promo code: ATF10
Link to One Hit Wonder Paint:
www.ohwpaint.com/discount/ATF...
Get 5$ off your OHW order use code: ATFHYDRO
Camera gear we use:
Camera Lenses: amzn.to/36rcdE4
Camera Mount: amzn.to/2GqMroQ
Flex Mount: amzn.to/2tIDLHY
Flex Tripod: amzn.to/2ux7CTB
Tall Tripod: amzn.to/36xUgUF
Lav Mic: amzn.to/2t27awm
Products used in the boat repair video series:
Kreg Rip-Cut saw attachment: amzn.to/35PHhxq
Jigsaw blades: amzn.to/2DCjLb4
Straight cut router bit: amzn.to/2ODUMut
Wood glue: amzn.to/2R7DxTN
Wood clamps: amzn.to/2Y6aW2C
Fiberglass resin: amzn.to/2qbD5Jl
Chip brush: amzn.to/380rbTN
10X20 Canopy Cover: amzn.to/2Gzyqsq
Standard Rivet Gun: amzn.to/32afGFW
Large Rivet Gun: amzn.to/33rFeyj
¼ Inch Sealed Rivets: amzn.to/2MBQTEb
3m 5200 Sealant: amzn.to/2McyOgP
JB Marine Weld: amzn.to/2B91iC0
Brazing rods: amzn.to/2nGoa8A
Brazing Flux: amzn.to/2OGsgZz
3/16 Inch Sealed Rivets: amzn.to/2zEFoJE
Rivets: amzn.to/2PJwccl
Welder: amzn.to/2C7OLiv
Welding helmet: amzn.to/2WLNY0k
Welding gloves: amzn.to/2PIMRgo
Angle Grinder: amzn.to/2qglTC0
Flap Disc: amzn.to/2qmaMY4
Float Pods: www.explorebeavertail.com/pro...
22 Inch Light Bar: amzn.to/37zNboI
11 Inch Light Bar: amzn.to/2N2wiJS
LED Navigation Lights: amzn.to/30HJv2J
3/16 Inch Sealed Rivets: amzn.to/2zEFoJE

Опубликовано:

16 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 478

@brockreed1984 Год назад

Man this is the best side by side comparison video I’ve seen. Very detailed and non biased, honest review. Two thumbs up.

@SendItJonBoats Год назад

Thank you Brock, glad you enjoyed the video.

@gregnuttall3637 Год назад

Thanks Man, You shed some good light on some stuff that I've been wandering about.

@randyb3135 3 года назад

Finally the video I've been waiting for! Appreciate the unbiased opinion👍

@SendItJonBoats 3 года назад

Thank you Randy B. Sorry it took so long, it was a lot of video to edit and I wanted to make sure I covered all the details. It's amazing how tough it is to film an entire video and not insert your opinion at all until the very end! Glad I took the time to do it so everyone has something solid to go off when deciding which motor to buy.

@randyb3135 3 года назад

@@SendItJonBoats man I'm sure it was tough! Looks like I'll be ordering the beaver dam kit after having the 420 motor sitting in the garage for probably over a year so clearly I wasn't in a big hurry anyways! I've got a couple jons I can test it on but I don't have one exactly like I'm wanting. Probably going to end up buying a 1436 when I can find a deal on one. Thanks again for the videos and keep up the good work!

@SendItJonBoats 3 года назад

@@randyb3135 HA HA! Yeah man get that 420 roaring with a kit! So much fun. I bet with a few mods you could run over 20 mph easy.

@cartermackenzie1135 2 года назад

I was literally going through your channel, I just discovered it and I was like “I wonder if he’s reviewed any specific mud motor kits” and here you are reviewing all of them at once lol

@SendItJonBoats 2 года назад

LOL... yeah I reviewed them, got some more reviews coming soon.

@1958werewolf 2 года назад

I watch a lot of reviews online and young man, you did one of the most complete comparisons that I’ve seen on anything. Great job. We have a 3 seat Saturn Kaboat. I really like the beaver. Have a great day!

@SendItJonBoats 2 года назад

I appreciate that! Thanks for checking out the video.

@rangerdanger126 Год назад

Nice video. For my Jon boat I went with the larger Beaver Dam kit and the HF 15.8 HP motor. Took a little time getting it dialed in, but I'm very happy with it. The Beaver Dam owner, Mr. Robert Milner is First Rate! We were in constant contact via chat and calls, as I dialed in my set-up. Since I'm tall, and the distance to my transom and the first bench seat is a little far, I ended up having them make me a longer handle. Now I'm very comfortable as it runs through the water. I'm looking for to Ducks and Deer this season. Did do a little fishing out of my rig also and discovered I needed a long paddle in the boat to help me get away from the shore, the docks, and structure at certain times. Rangers... Lead the Way!

@SendItJonBoats Год назад

Rangers lead the way! Awesome that you got your motor dialed in my man!

@wadeballinger6877 Год назад

That’s the best and most beautiful presentation I’ve ever seen for a product !!!!!

@SendItJonBoats 9 месяцев назад

Thanks, glad you enjoyed it.

@DeeplyDrivenOutdoors 2 года назад

This is one of the most informative videos I have ever seen. Well done. Subscribed.

@SendItJonBoats 2 года назад

Thank you, glad you enjoyed the video.

@stanleyl.5704 3 года назад

Thanks for the reviews and stating all the facts before your opinion. Not many channels can do that. Keep it up.

@SendItJonBoats 3 года назад

Thank you Stanley, I appreciate that. Just want to give a good review and keep it honest. Many more cool videos to come, and much faster speeds to achieve!

@americanguy1317 2 года назад

Great review, as a tool maker I appreciate all the numerical specs. I could easily build one in the shop, and just buy the throttle cable. pretty straight forward.

@SendItJonBoats 2 года назад

Tool maker.... hmmmm I may need your expertise for a future build! Email me if you are interested in helping out with a project I will be building soon. chris@atfhydrographics.com

@TN.WoodsandWater 2 года назад

Very good job, very detailed, you helped me make my decision, I'm going to go with a predator 22hp beaver dam kit.

@SendItJonBoats 2 года назад

Awesome Eric. You will love it. I have been very pleased with my 22hp Beaver Dam Kit.

@CMMC-zb1gw 3 года назад

Love the content chief. Keep it up!

@SendItJonBoats 3 года назад

Thank you CMMC, I appreciate that! Got a lot more cool stuff coming. It needs to hurry up and get warm so I can go FULL SEND on the river! I hear the fish calling my name!

@dougdavis777 2 года назад

Awesome review answered all my questions about each kit thank you very much

@SendItJonBoats 2 года назад

Glad I could help. I tried to think of all the things I was curious about when I was shopping for a kit.

@jeremykatzenstein1538 3 года назад

Thanks for this, I’m getting ready to refurb a 1432 and have been waiting for this mud motor review.

@SendItJonBoats 3 года назад

Awesome, thanks for watching Jeremy. A 420 predator would make your boat scoot pretty good!

@jtotherog 3 года назад

@@SendItJonBoats ive been curious what size i need on my 14. Thanks man!

@SendItJonBoats 3 года назад

@@jtotherog 13hp is the way to go. It's a good solid motor and does decent speeds.

@dustinbond4998 3 года назад

Great unbiased review....keep up the good work!

@SendItJonBoats 3 года назад

Thanks Dustin! Glad you enjoyed it.

@stephenhair5501 2 года назад

Some very good information you shared. These motors have been getting my attention lately. Might just be reaching out to you about one of these kits. Thanks for the great video Chris.

@SendItJonBoats 2 года назад

I really like them and they are really cheap. Feel free to reach out any time!

@johnbelusko6347 Год назад

Bro very very helpful video. I started filling out all the purchace info on a mudskipper…..the same exact one u reviewed and this video helped sell me on it. Im not a filthy rich guy and the good quality at a reasonable price im in. Thanks for this review.

@SendItJonBoats Год назад

Glad I could help. Thanks for watching

@gznys3 2 года назад

Great job on the review. Covered everything with just the right amount of detail. And thank you for not showing the unboxing!

@SendItJonBoats 2 года назад

LOL, I hate unboxing videos, they drive me insane! Glad the review was helpful.

@abrahamthompson7090 2 года назад

I have have ran a swamp runner for about 10 years and so far it has continued to impress me . I have had to made a few mods though .

@SendItJonBoats 2 года назад

They all work fine. I didn't have any issues with any of them.

@elmerfox456 Год назад

I really appreciate your efforts to produce an honest comparison. I am hoping you will soon compare surface drives soon. Physical limitations due to injuries make surface drives my only option.

@SendItJonBoats Год назад

If I had surface drive money I would have already bought them and compared. Them things are expensive. Maybe one day I will get some of these companies to send me some.

@Murphyslawfarm 3 года назад

G'day great info video mate and the best unboxing video on youtube 👍😂

@SendItJonBoats 3 года назад

LOL. I knew you would like that unboxing! Thanks for watching.

@bestwish86 3 года назад

If every unboxing kit was a funny as the 3 seconds you spent on yours id watch those.

@SendItJonBoats 3 года назад

LOL... I hate unboxing videos, they drive me insane!!! Im like dude no body wants to hear paper crackling for 30 minutes and another 10 minutes of, hmm, whats that, hmmm wow, oh look a bag of bolts, oh looky here there is the instructions..... ughhhhh! LOL

@Chalz108 3 года назад

When you say "point three nine" instead of "point thirty nine" that makes my soul happy

@SendItJonBoats 3 года назад

LOL, I am so glad that my counting skills had enough satisfaction to tickle your insides! LMAO. Love it!

@bob2161 3 года назад

Great video! Good production quality (camera, lighting, audio, editing, continuity). Your representation and presentation are spot on. You said what you were going to do but most importantly, you did what you said you were going to do. There was never any guessing about what was fact, and what was opinion. You have earned yourself a new subscriber. I have been researching these motor kits for over a year now (mostly RU-vid videos). There are not many that do the "side by side" like you have here. The majority of them are biased one way or another. However, a lot of them are trying to appear objective. This leaves the viewer to sort out details that are often hidden "between the lines", if not outright omitted. As my project is getting closer to completion, I will need to make a decision about which motor kit to purchase soon. Your video has caused me to reevaluate my choices. I had just about settled on the Swamp Runner. After watching this though, I'm inclined to agree with your (clearly stated) opinion. I had no idea that the Beaver Dam would bolt up to two different classes of engines. For me, that is an important feature. Thank you for making such a great video. I will need to watch the rest of you videos. I'm especially interested in the upcoming transom floats video. I would, however, like to share one critique with you. There seems to be some confusion about what is a key and what is a keyway. I'm including (below) an excerpt from a technical blog that explains it better than I can. Keep up the great work! "Key, Keyway, and Keyseat A key is a piece of metal used to connect a rotating machine element to the shaft. A key prevents a relative rotation between the two parts, and may enable torque transmission to occur. For a key to function properly, both the shaft and rotating elements (gear, pulley and coupling) must have a keyway and a keyseat. Usually the term keyseat is referred as a groove or pocket on a shaft, and a keyway is a slot in a hub in which the key fits into. The complete system is called a keyed joint." Here is the link to the site this came from: www.lovejoy-inc.com/resources/technical-articles/why-power-transmission-shafts-have-both-keys-keyways/

@SendItJonBoats 3 года назад

Thanks Bob I really appreciate that. I worked really hard to keep my opinion out of it during the video because I wanted it to be a real down to earth honest review of the popular kits and get the truth out there. I got so tired of seeing and hearing that RA RA team whatever company, and I wanted to set the record straight. They all worked just fine, unlike many of the reviews I have seen where people bashed and talked trash about the products they didn't like or weren't getting paid by.

@jeremyjulienne3659 3 года назад

Best and most honest mud motor review by far! Great info, very thorough, left it all on the table! Awesome video to help us jon boat guys get exactly what we want!

@SendItJonBoats 3 года назад

Thanks Jeremy, glad it was helpful. It was a lot of work but it was nice to be able to get an honest review out there and not just trash talk any of the companies. They all work fine, just got to pick whats most important, money or product quality.

@paulmach5 5 месяцев назад

Great Video, keep up the good work!

@greenpighunter6930 3 года назад

Great detailed info. Thank you

@SendItJonBoats 3 года назад

Appreciate that GreenPig Hunter! Glad you enjoyed the video.

@ChrisFunktheFeralOne 3 года назад

great job sir! love the side by side comparisons for sure! i was a bit lost on the shorter key part, my 13 predator key fit the swamp runner medium without modification. also, i totally agree swamp runner dropped the ball on the kill switch. i ended up wiring a 4 wheeler kill switch that mounted perfectly on the handle but still, it shoulda come factory like that to me.... i upgraded to the saltwater extreme shaft with the bayou bushing so my kit came into about 745$ shipped if that helps anyone wondering and i did order the 8.5" stainless prop. i will carry the aluminum for my spares. i really like the way the beaver dam mounts to the motor, making sure the swamp runner long shaft was seated properly was my biggest issue on my installation. keep shooting, i'll keep watching!

@SendItJonBoats 3 года назад

Hey Chris. thanks for checking out the video. On the Swamp Runner I got, the stock sized key would not allow the adapter shaft to slide all the way on, I had to use a shorter one in order to get the adapter on all the way on so the screws would tighten down against the engine shaft. For as much Ra Ra team swamp runner stuff I have seen over the last few years on social media... it was not all that it was cracked up to be. Not a bad kit by any means, it works fine, just not up to the hype.

@jeffconley6366 Год назад

The predator 420 has a switch on the engine. So why do you need a switch on the tiller.

@ChrisFunktheFeralOne Год назад

@@jeffconley6366 so i didn't have to turn around and take my eyes off where i was going to stop it. just faster and safer to me.

@jeffconley6366 Год назад

@@ChrisFunktheFeralOne In that case, release the throttle and push the tiller down and prop comes out of water.

@ryanovergaard330 2 года назад

Well done. One I have not seen a comparison on is the backwater. A side by side comparison of that one and the beaver dam would be awesome.

@SendItJonBoats 2 года назад

The backwater is a whole nother ball game. the backwater is the strongest and beefiest of them all and I want one, just don't have the money for one.

@Kana0211 10 месяцев назад

As someone who doesnt even need a mud motor and only use outboards, i like the beaver dam. And i enjoyed watching this video too.

@SendItJonBoats 9 месяцев назад

I wish I knew more about outboard to test them, but where I like to fish, and outboard wouldnt make it

@rexslay7264 3 года назад

Awesome review you did a great job

@SendItJonBoats 3 года назад

Appreciate that Rex Slay. It was a lot of work but it was worth it to get a good honest review out there!

@jacobpayne9667 Год назад

I have a swamp runner and love it! Never used a surface drive or an American longtail so I can't really tell you if those are worth the money... But I will tell you that these 3 are great ways to get on the water and go places an outboard can't.

@chevyon37s 2 года назад

I’ve run a swamp runner mini with a 79cc predator engine for 3 years now and it’s a pretty decent kit. On my layout boat I’ve hit 13mph (empty with the 5.5” prop) but loaded going hunting 7-8mph is pretty standard with the 5” prop. Only bad thing about the kit is the engine on it, is a pain in the ass some times.

@SendItJonBoats 2 года назад

None of the kits were bad at all. Just showing the minor differences in the kits for those that ask me all the time.

@ronzbee3458 2 года назад

love ur videos and ur sense of humor, love it!!!lol!

@SendItJonBoats 2 года назад

Thank you so much!! Appreciate you checking out the video

@davidleekalbjr.3035 2 года назад

I'm sold on Beaver Dam. The "Twister" served me well. 9hp full kit with electric start, for $600. at the time.

@SendItJonBoats 2 года назад

I heard a lot of mixed stuff on the twister. I would love to try one out and see how it goes, but I do like my beaver dam kit as well.

@dabprod 2 года назад

Excellent. Thank you.

@SendItJonBoats Год назад

THanks for watching

@rrmilner 3 года назад

Great Video and Honest, accurate review. Can't beat the FACTS! This was way over due for the Thai longtails. Too much BS online. Thanks for setting the record straight.

@SendItJonBoats 3 года назад

👍

@sandcreekoutdoors1056 3 года назад

Excellent video as always.

@SendItJonBoats 3 года назад

Thank you, I am glad you enjoyed it.

@florida__jack 3 года назад

Very good review and comparison 👍👍

@SendItJonBoats 3 года назад

Thanks man! appreciate you watching the video.

@tannermorton986 Год назад

The swamp runner offers the 100 inch saltwater shaft that allows a 18-20hp motor to be used on the 13-18hp kit. So you can opt for a more versatial kit for the same price as a 18-23hp option. You can take it in the saltwater without fear

@fireantfishing 3 года назад

Great video, great info, great send it session. 👍

@SendItJonBoats 3 года назад

Thanks bud. When the weather warms up we gotta go down to the river and let you have some mud motor fun!

@riccoguilin4218 2 года назад

I just purchased the mud skipper two piece using a 3hp predator for a roundabout boat, its definitely going to be interesting to see how it handles

@SendItJonBoats 2 года назад

I heard good stuff about the mud skipper small kits, haven't used one myself but any of those kits will work good

@matthewsylva8958 3 года назад

Good review! Thank u

@SendItJonBoats 3 года назад

Glad I could be of service Matthew. Thanks for checking out the video.

@scottseyler210 3 года назад

Solid review. 🤙🏼

@SendItJonBoats 3 года назад

Appreciate that Scott. Glad you enjoyed it and thanks for watching.

@UltraMagaFan 2 года назад

If I was gonna get me a long tail this small I’d personally get a Go Devil with a sixteen horsepower Vanguard. I know it’s not a diy kit and it’s more expensive but they are some of the best mud motors you can get. We have had our Go Devil with a 23 horsepower vanguard for 36 years and it has never given us any major problems and still runs great. Anyways nice review. I stayed here and watched even though I’m not interested in a diy kit.

@SendItJonBoats 2 года назад

I agree and would love to have a go devil or backwater.... I just like playing around with these kits because they are cheap and I want to run some different motor ideas.

@UltraMagaFan 2 года назад

@@SendItJonBoats Honestly they should sell their long tails and let you get your own engine for it. They only sell them with Vanguards and Hondas which are both very expensive engines. They are half of the price the long tail itself is fairly cheap. These things are also so simple to maintain and engine swap if you have to. We are thinking about getting a new Vanguard for ours. The old one runs fine but we just don’t want to take a chance of it quitting while we are duck hunting.

@Deltro61 2 года назад

Excellent in depth review. Have one for surface drives as well? Would love to see a comparison.

@SendItJonBoats 2 года назад

I would love to do one for surface drives but dang them things are expensive. If they will send me some I will review them.

@numberonenole4590 3 года назад

Great review brother!!! Send it!!!

@SendItJonBoats 3 года назад

Appreciate it Bro!!!! We gonna send it!

@fwinslow 2 года назад

Great video! Thank you!

@SendItJonBoats 2 года назад

Glad you enjoyed the video.

@kurtsnyder8979 2 года назад

GREAT video! Thanks!

@SendItJonBoats 2 года назад

Glad you liked it!

@UWPcustombaits 3 года назад

I bought the SwampRunner Kit just a few more things to ad, on my 301 Pred I had to cut the motor shaft down for the kit to fit aswell as the keyway like you mentioned, also allot of the extra parts on SwampRunners website you have to register your kit to even buy the parts like they are some special longtail club or something.

@SendItJonBoats 3 года назад

Thats a good point bud, didn't even think to talk about that in the video. I think it is crazy how you have to be a member of their site in order to get parts, you would think they would want to sell parts to anyone with money!?! but what do I know, it's not like I run my own business or anything lol.

@johnnybarbar7435 3 года назад

@@SendItJonBoats IIRC, early on they had people getting factory parts, cloning them overseas and trying to make false claims. Happens a lot in a lot of product lines. This is just their attempt to protect their R&D and products.

@SendItJonBoats 3 года назад

@@johnnybarbar7435 That's a good point, did not even think about that. Cloning is a huge issue in a lot of markets.

@ericmuhlbeier8023 3 года назад

I also have a swap runner small kit and a 212 hopped up a lil... its on a 1430 flat bottom. I get about 15 downriver downwind with a 6.5 hurricane prop tached @4675 with stock internals! She doesn't like doing it very long.. im also registered, and it makes sense to me that they keep the parts to the owners of their kits. Also imo the skag on the bottom of the shaft is much beefier on the swamp runner kits.. but the adaptation of powerplant capability and brass bushing is a tough to beat feature! I've got some serious considerations to make when I upgrade so I can keep up with my buddies in our long tail crew

@nickwilliamsoutdoors 2 года назад

@@SendItJonBoats I bought my swamprunner before Beaver Dam started making a kit that fit everything from 8-23hp. I had concerns about the cast aluminum coupler and galvanic corrosion with the brass bushing in a steel shaft running in saltwater. In hindsight I wonder if those issues are more in my head than out in the real world. Sure the swamprunner coupler is steel but it's bolted to a cast aluminum engine. And after replacing 2 bushings in 200 hours I'm wondering if brass wouldn't be nice. But I can confirm that registering to get parts is a royal PITA and is enough to make me not recommend a swamprunner. Beaver Dam did a smart thing making one kit fit the 13 and 23 motor because I can tell you I have a strong desire to slap a 23 on my weldcraft 1436. If I was buying an import kit again I'd go Beaver Dam. Anywho, nice channel!

@jeffjurkanis6709 Год назад

5 star excellent job ! The beaver Dam kit offering the larger motor option which on a lightly loaded boat will not give you more top end but loaded will run closer to your top speed like you were doing. I had a 40 Merc upgraded to a 65 then ran 21mph empty or with 2 additional people ! I built the smaller SPS kit years ago stock and alone in my 18ft Lowe Big John 6mph ! Bought and upgraded everything but the case -The flywheel and electric start option probably best option ! My $450.00 upgraded got me 9.6 mph turned the 6 into 9hp. OMB warehouse has the aluminum flywheel so if you disconnect the gov. no China made flywheel to com apart ! An out board motor is about a 3 to 1 gear drive,speed wise a 15hp outboard will still out run a 22hp longtail ! These days I have a full gear shift 35hp Gatortail with hydraulic steering works like power steering in your car ! Crazy but do a youtube search for worlds fastest mud motor luck that guy did not hit anything and get launched !

@SendItJonBoats Год назад

Cool thanks for the info.

@jeffconley6366 Год назад

the 18ft Lowe Big John is a very wide boat. I believe it is not recommended to go wider than 48" with long tails.

@enuff2bdangerous 3 года назад

I own the sps kit and have put a couple hundred hours on it. Great kit and has held up to the abuse of numerous seasons of duck hunting and fishing. I highly recommend it. Stupid simple design that just works!

@SendItJonBoats 3 года назад

Nice, I never said the sps was a bad kit, they all worked just fine.

@MrT13 Год назад

At first skipper but it was kind of crap. Broke the coupler pretty quick. Tried the swamp runner and haven’t looked back. Bent rods on 22hp and ran it for 2 years till it broke the gimbal bracket. Still made it home and didn’t even realize it till next day. (Alcohol mite be responsible) 50$ was great cheap replacement. So tried a built motor and bent expensive rods… still run swamp runner. Stock quiet 22 100” bullet prop and super reliable. Breaks props sometimes. But best parts and prop selection. Through bolted the transom bracket and like I said haven’t looked back. Whole lot of dead ducks. Bass fillets. And stabbed fish. Really has held together and hasn’t left me stranded in 5 years.

@juliosdiy3206 Год назад

This vid is the BOOOOOMB! i will try the Swamp kit i like that bottom fin design.

@SendItJonBoats Год назад

Glad you like it! Thank you for watching

@peterkolovos3079 3 года назад

Excellent review.

@SendItJonBoats 3 года назад

Thank you Peter, glad you enjoyed it!

@Jayy_Black 2 года назад

Subbed just cause of the Intro “Send it” 😂🤣

@SendItJonBoats 2 года назад

LOL... many more unicorn videos coming soon!

@kentsatterfield6617 3 года назад

😈😈what about the float pods...... haha just kidding! Great video! I'm glad I found your page. Your paint job on that boat is bad ass! Keep up the great content man!

@SendItJonBoats 3 года назад

Im going to bash those float pods with a sledge hammer lol, just kidding. Thanks for the compliments bud, much more fun stuff coming!

@piexayarangsy9304 3 года назад

Thank you for good information sir.

@SendItJonBoats 3 года назад

You are very welcome. Thanks for checking out the video.

@tjon66 2 года назад

As with everything you will get what you pay for. I chose the mud-skipper. The transom bracket does need additional support.

@SendItJonBoats 2 года назад

The mud skipper wasn't a bad kit at all.

@susantroy11 2 года назад

Great review😎 wondering what speed you would get at idle🧐 also I’ve seen them with the shorter s shaped prop shafts. What benefit or disadvantages those shafts have compared to the long shaft 🤔

@SendItJonBoats 2 года назад

The straight shafts are better and more robust in my opinion. My idle speeds are usually 5-8 mph

@jftjft5962 2 года назад

great review, very detailed.

@SendItJonBoats 2 года назад

Thank you, I appreciate you checking out the video.

@MudMotorsMax 3 года назад

Man how informative keep it up I’m going to give your channel a shout out soon

@SendItJonBoats 3 года назад

Thanks bud, I appreciate it. Glad I could finally get this review video finished, it was a ton of work.

@MudMotorsMax 3 года назад

@@SendItJonBoats Man I can tell I can tell it was a lot of work but listen it actually made me want to listen to the whole thing from the start to finish which is exactly what you want I mean I can tell you put a lot of work in there so we can tell like I need to step it up bro that’s how much I could tell lmao. I mean from a listener and a RU-vid or first of all from someone who’s watching it’s funny informative and it’s got good quality as a RU-vidr myself I’m kind of takin back man I mean you’re really put a lot of quality and hard work in this your channel is going to do very well. makes me feel like I’m slacking hahah. I didn’t know how good beaver dam was. Anyway I really wish the best of luck for you and I’m gonna give you a shout out like I said you deserve it so keep it up bro

@MudMotorsMax 3 года назад

@@SendItJonBoats You keep it fun informative and unbiased like you do and I truly believe you’re going to go along way

@SendItJonBoats 3 года назад

@@MudMotorsMax Thanks for the kind words. I did youtube for nearly 3 years on my other channel before I really got everything figured out, camera angles, lighting, editing, there is so much that goes into it. But now that I have a lot of practice and have a system down it is a lot easier to make videos. It's still a learning process and takes some time to get my camera guy trained up so he knows what to do when we are on the water. Keep doing what your doing bro, learn as you go and keep making mud motor content. There is not enough of us RU-vidrs out there that like longtails so we have to stick together and help each other out. If you ever need anything at all hit me up!

@MudMotorsMax 3 года назад

@@SendItJonBoats I’m just gonna keep on having fun keep it organic and yes I’m gonna learn I’ve already learned so much definitely going to keep making mud motor content it’s really pretty fulfilling I really enjoy it I’m sure you do too thanks so much man I really appreciate it

@nicholasleewood 8 месяцев назад

Digital caliper bud! Measures thousand. Not hatin just helpin. Love your videos.

@purpleman1360 6 месяцев назад

ok.... you got a new subscription just for the box opening

@EMNM22 6 месяцев назад

Beaver dam on a kayak! Now thats a good time!

@gonzalomanriquez4956 3 года назад

i just ordered the Mud-Skipper 2-7HP kit for my little 1232 jon boat. excited to get it and test it out on a little snakehead and bass fishing

@SendItJonBoats 3 года назад

Awesome man! Mud motors are a lof of fun and there is so much you can do with them.

@gonzalomanriquez4956 3 года назад

@@SendItJonBoats yeah this is the first one i have owned. after i sold my Bass boat i needed to get something to get back on the water and i figured a jon boat was the way to go. never really seen mud motors before because growing up everyone just ran air boats in the shallows.

@SendItJonBoats 3 года назад

@@gonzalomanriquez4956 I would love to build a small airboat in the future, they look like so much fun.

@gonzalomanriquez4956 3 года назад

@@SendItJonBoats they are fun but can be dangerous because they are so top heavy

@SendItJonBoats 3 года назад

@@gonzalomanriquez4956 I have heard that, I don't know a whole lot about them other than it is easy to roll them over. Sure looks like fun though.

@codyc6020 2 года назад

Love the video! Have you ever done a review on Mud Buddy systems?

@SendItJonBoats 2 года назад

No, but I would love too if they want to send me one. I aint ballin rich to be able to afford a mud buddy.

@blackspider1987 3 года назад

great video only i wish you add to the test the backwater to see if worth it since its more expensive thanks for the info

@SendItJonBoats 3 года назад

I can tell you from personal experience the backwater is the best kit on the planet but it is way out of my price range. We only wanted to test the cheapest kits out there, the backwater is no comparison.

@bubbyward9295 Год назад

what would you recommend for shallow rivers

@earlkeim3822 Год назад

Great video man

@SendItJonBoats 9 месяцев назад

Thanks, appreciate you watching.

@rangerdanger126 2 года назад

Nice review. Plan to go with a Beaver Dam. What grease do you recommend for an area what gets hot and freezes in the same season?

@SendItJonBoats Год назад

corn head grease is what most people like. I use whatever I have in the shop and it has not let me down.

@borum5551 3 года назад

I agree with the decision, the Beaver Dam just seemed to be made better. Even before your "opinion"!

@SendItJonBoats 3 года назад

Good point Bryan. I ran a Beaver Dam years ago and I like the upgrades they have made to the kit. It is most definitely super strong and beefy! Cant wait to get out on the water and play some more with the BDMR kit.

@quackhead7492 2 года назад

I have the swamp runner it's a older one I bought second hand I have run it for 4 year's now but I think it's time for a new one the beaver tail is the one I think I will go with this side by side comparison is extremely helpful it was good to see the difference in construction the transom mount is what sold me thank you.

@jimnash526 11 месяцев назад

Excellent !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@SendItJonBoats 9 месяцев назад

Glad you like it!

@olent4816 Год назад

I like the way you think I'm in Wisconsin and planed to buy a mud motor kit soon

@SendItJonBoats Год назад

Thank you. Glad you enjoyed the video.

@GreggGiblin-sy5og 21 день назад

Excellent review! Probably an ignorant question... Newbie here thinking of doing something like this. As cheap as the Predator engines are, or other Honda clones and how cost of upgrades can quickly add up to be more than the engines themselves, I thought it may make sense to buy 2 or 3 inexpensive engines, then tie them together to go to one of these kits. Is thereab adapter out there for this purpose, or with some creativity could one do a DIY hack. Or, is this just a bad idea for some reason?

@benpeirce2531 2 года назад

I found your video by accident. Its great! I had never given any thought to a mud motor other than watching a 007 movie. But now I have like a 100 questions, Chris Funk kind of answered part of one will they work in salt water. "2" can you sit down and drive it. Being 65 bad knees I don't have the best balance when I'm sober I'd be wet in no time. Thank you keep up the great videos.

@SendItJonBoats 2 года назад

Chris Funk has some good info as well, and he is super nice guy. You can definitely run them sitting down, I just like to stand up so I can see better.

@darinsroka8234 3 года назад

Excellent review, new subscriber here.

@SendItJonBoats 3 года назад

Thanks Darin, glad to have you on the channel. Many more awesome videos coming soon!

@datilman9146 3 года назад

Great video man!! Quick question, how tall are you? I've been wanting to do a build like this and i would like to stand up to run it as well. I am kinda tall

@SendItJonBoats 3 года назад

I am 6 ft tall. The beaver dam handle was the perfect height for me. The swamp runner I had to lean down just a tad and the mud skipper was almost perfect.

@MarkHale-nt9qg 17 дней назад

I have a 12ft Alumacraft jon boat and just purchased a mud skipper rated for 5-7 horsepower engine. I'm going to get it at Harbor Freight, but I am just not sure which one I am suppose to get. Any help would be appreciated.

@agkoh 3 года назад

Cant wait to see the video about the pods. I have a 16ft Jon boat with pods and am looking at buying my first Mud motor. on the fence between a long tail and a twister style. Thoughts on twister vs longtail?

@SendItJonBoats 3 года назад

Longtail all day. I have not heard much good things about the twister. I love my longtails and they just plain work everytime.

@agkoh 3 года назад

@@SendItJonBoats 100" or 80" shaft?

@SendItJonBoats 3 года назад

@@agkoh 100

@chevyon37s 2 года назад

I say go surface drive.

@tommathews8314 Год назад

Very curious what speeds you get under load.

@grindfestoutdoors 3 года назад

I love my beaver dam kit.

@SendItJonBoats 3 года назад

Awesome, I am liking mine too! Can't wait to get back on the water when it warms up some more!

@grindfestoutdoors 3 года назад

@@SendItJonBoats Robert Milner is a legit good guy too. Spent 30 min on the phone with me when I was trying to decide what kind of a motor to put on my boat. Size, etc.

@robertfoote3255 2 года назад

😃😃😃😃😃! Not a mud motor guy, but love a good flat-bottomed boat. Up north in the clear water rivers....jet motors rule.....but that little LOWES w/ the pods....😍😍! I see it with a 25 or 30 HP jet chasing steelhead! 1760 LOWES w/60HP Jet is what my money bought me! 😂😂😂. Great content! That's Five Smiles!

@SendItJonBoats 2 года назад

I have never ran a jet but I see a lot of videos on them and dang man they are fast!!!!

@robertfoote3255 2 года назад

@@SendItJonBoats if the motor is big enough they are....but in the rivers here there are plenty of rocks, stumps, logs, and sand bars.....you gotta know the water you are in....because bad things happen real quick....when you go fast! BOAT=Bust Out Another Thousand.... There are fellas here that run set-ups like you have.... mostly duck and goose hunters.... But Steelhead and Salmon runs spring and fall plus summer fly fisherman...bring out the Jets. I'm digging the Gator Glide job 🤔. 😍 I have coated my deck with truck bed liner for a "No Slip" finish on the icy spring mornings Steelheading. 🤠 You need the clear clean water for Jets......plugging up a water pump inlet with mud or weeds is a bad day. You tear it down to access it....pull the jet scoop and pull the impeller to clear it out. Love all the flatties...🤠

@SendItJonBoats 2 года назад

@@robertfoote3255 WE got some nasty water down here. I ain't never seen a clear river before. We got lots of mud and sand.

@DeltaRogueFishing 3 года назад

I picked the Beaver Dam the second I saw the transom bracket. BEEFY! Nice review! 👊

@SendItJonBoats 3 года назад

It is definatley a beefy kit overall. But that transom bracket it like wow beefy! Thanks for checking out the video.

@jeffconley6366 Год назад

Well done. Note, I would never use a stainless steel prop with these kits. Especially with Predator engines. Let the key and propeller (aluminum) take the force of an impact..

@trofazz 3 года назад

A couple of things I noticed was that you didn't mention that the SPS has gimble bearings at the pivot points where the others do not. That will make a big difference over time in how smooth it will operate. Also, the throttle cable on the SPS is (supposedly) stainless steel, where the others are not. I think in other areas that you presented that the Beaverdam is of very good quality, but the shipping pricing is off by $100 or so.. I don't think anyone would be disappointed in the quality of a BDMR

@SendItJonBoats 3 года назад

Good point on the bearings... I didn't even look at that. I just looked at the mud skipper and it just has some spacers in there. The BDMR kit has what looks like a greaseable bushing in the pivot so thats better than nothing. Like I said in the video, none of them are bad kits at all. Just all depends on what you are looking for and how much you want to spend.

@trofazz 3 года назад

@@SendItJonBoats , it's not something that is readily noticeable, just wanted to mention it. Also, the throttle should be using the return spring of the engine vs. the handle. This will assure that the cable is indeed returning the throttle back to idle properly, and to adjust for full throttle operating range.. I think the Beaver Dam kit has a much better shaft and I like the idea of a double retention bolt system where the shaft connects to the base. I think you did an excellent job on the review.

@walleyeye 3 месяца назад

Would a mudmotor work on a v bow 15’ aluminum boat? An old springbok.

@coopernickerson7470 Год назад

Beaver dam shaft length comes in two size: 85” and 65”. Which is better?

@jeffhilley7933 10 месяцев назад

What had to be dialed in on the Beaver Dam. Obviously it's the heaviest built. I will be putting together a rig this spring and after this video will be going with BD. So I was wondering what fine tuning if any during testing you may have had to do?

@SendItJonBoats 9 месяцев назад

Had to adjust the motor back 2 holes from center, and change the prop sizes to fin what my boat liked best.

@Picard80 2 года назад

Great review. Did you do a side by side total weigth that I missed? Thank you

@SendItJonBoats 2 года назад

No I did not, and I should have. Did not even think about that until after the video was out.

@Picard80 2 года назад

@@SendItJonBoats no worries

@ngk330 3 месяца назад

How long was the tail on the beaver damn?

@sampaulin8418 3 года назад

I have had a swamp runner for two years now and have absolutely beat the shit out of it with zero problems

@SendItJonBoats 3 года назад

I never said any of them were bad products and never said they wouldn't last a long time. I even made a point to say they were all good and they worked just fine.

@jasongrinnell1986 Год назад

Awesome review. Did you say the beaver dam would run on a v twin? If so how does it adapt to the larger diameter shaft?

@jasongrinnell1986 Год назад

I went to the website. I found the answer.

@SendItJonBoats Год назад

Yup it works on v twin and they make different size shaft adapters.

@clayseale 2 года назад

Love the side by side, but I wish you put these on a bigger boat. I am interested to know how they push a 16 footer.

@SendItJonBoats 2 года назад

The footage from this video is mostly on a 1648. I got a full video coming on what size motor pushes a 16 footer best

@NicolasMoore838 2 года назад

Regardless of “Scooters” comments, I thank you for the time and details you put into this. It has helped! Would you be willing to do a performance test with these on the bateau? The predator 420 vs the 670, fully loaded weight for duck season, and give us a couple runs up into your “honey” holes. I’m just looking for your honest opinion if the 420 feels “underpowered” vs the 670

@SendItJonBoats 2 года назад

Glad the video could help. I already have a comparison video filmed on those motors in this boat. i will be working on it soon.

@jasonmallory4152 2 года назад

Solid review. I bought the mud skipper kit with a 2 piece 100” shaft and I’m running it on a 1448 with a 420. I was having trouble keeping the prop in the water and my motor seemed to bog down quite a bit ( it died several time’s on me) I had a 9 1/2” prop on witch could have been the problem. But do you have any tips on getting this thing to run better Iv thought about adding an anti cavitation kit but don’t know if that will fix my issue.

@SendItJonBoats 2 года назад

Cavitation plate is a waste of money, I tried that several times and never got it to run. Start by going down in prop size. My 420 motors like a7.5 to 8 inch prop. Also if the motor is dying them you have a motor issue that needs to be addressed so fix that before you do anything else.

@coopzcustomz693 Год назад

Get an 8 inch prop and upgrade your fuel pump, carburetor, air intake and put in the twister cam. You'll be thoroughly surprised.

@coopzcustomz693 Год назад

Could try and make all the changes besides prop and see how it preforms due to the cam upgrade. But you may need to go to an 8 inch.

@wellheadcajun5664 3 года назад

Noticed the Mud Skipper transom mount had the best rolled corners without compromising the integrity of the steel.

@SendItJonBoats 3 года назад

Yeah the mud skipper was not a bad kit at all... none of them were bad. They all worked just fine. The beaver dam kit was just the best fit for me because I am going to be doing some wild stuff and I need it to be strong as possible.

@berklyjr7713 2 года назад

From very first look i was saying beaver dam becuase of beefyness espeacily when you said you could upgrade to bigger motor unlike other 2 which you forgot to mention at the end lol but great informative video

@SendItJonBoats 2 года назад

Yeah I did forget to mention that. Thanks for watching!

@meetoo50 3 месяца назад

Pull out the Hatter-Ade....The "Key Way" is the slot. The "Key" is the cold rolled piece of square steel or other wise known in full length, as "Key Stock".

@TheWeekendAngler 3 года назад

Awesome review, man! I've been tempted to try out a mud motor. Out of curiosity, what is the total weight (engine included) of each motor when fully assembled? Ballpark estimates are fine.

@SendItJonBoats 3 года назад

Get you one dude, they are a lot of fun and have yet to get stuck with one. The 420 predator I was using in this video weighs about 75-80 lbs with gas and oil. The mud motor kits vary but they are all around 70-80 pounds, so about 150-170ish weight range.

@TheWeekendAngler 3 года назад

@@SendItJonBoats that's not horrible for a weight. A little too much for my latest project jon boat, but a 1648 could definitely rock one.

@SendItJonBoats 3 года назад

@@TheWeekendAngler What size boat are you running? I put one of these on my 10 ft boat and it ran it just fine. It sat really low in the back end but so long as I was careful when slowing down I had no issues. If I slowed down too fast I took some back wash over the transom, but only a few gallon, not enough for me to worry about. I wouldn't hesitate to put one on a boat 12 ft or larger.

@TheWeekendAngler 3 года назад

@@SendItJonBoats its a 14' lake jon. Probably rated for a 20hp outboard. It can be seen in my boat buying tips video from a couple of weeks ago.

@SendItJonBoats 3 года назад

@@TheWeekendAngler Oh nice, I will have to go check your videos out. I am so behind it watching videos right now, work has been insane. I would get a 420 for your 14 footer any day of the week. I had a 212 on my last 1436 and it was extremely under powered.