INFINITI G35 🔧 NISSAN 350z - Radiator Coolant Flush Bleed Change

Подписаться 39 тыс.

Просмотров 229 тыс.

50% 1

Coolant flush. Radiator Bleeder how to use it to ensure you have no air bubbles when flushing the coolant system on your VQ Motor.
How to flush a coolant system in your car DIY. How to fill coolant in car. Keep your radiator, heater core, and engine clean. Flushing your coolant is good for the cooling system to prevent rust and to stop your car from overheating. Engine cooling system flush and antifreeze fill, the easy way.
I show you the location of the bleeder air relief plug, which is a screw in the back of the engine bay for the radiator on a G35 or 350z.
I love RU-vid and decided instead of consuming, I wanted to start creating! So please subscribe and I'll do my best to create the most entertaining and helpful videos possible for the G35.
Please subscribe to my channel.
2005 G35 - 350 HP G35 - Dyno Tuned Gain +37whp/45wtq...... • INFINITI G35 / NISSAN ...
Performance Mods:
- KW v3 Coilovers
- Injen CAI
- NWP 75mm throttle body
- Motordyne MREV2
- Motordyne 5/16th spacer
- Motordyne v3 ART pipes
- Motordyne Shockwave TDX2 exhaust
#Infiniti
#InfinitiQ60
#InfinitiG35
#Motordyne

Авто/Мото

Опубликовано:

12 дек 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 452

@StevenPlaysGolf 5 лет назад

Rumor is that he’s still up there bleeding his coolant system to this day.

@refuse2lose_ceo_ 5 лет назад

Steven R. Lol mines taking days

@darieninvegas 5 лет назад

Lmao.

@geeaye64 5 лет назад

Lol

@birpstudios6698 4 года назад

His girlfriend at the time has since moved on and remarried. Has 2 lovely kids.

@NightNurseMike 4 года назад

sucking more and more air into the system cause the cars at an angle

@michael2652 Месяц назад

5 years later and your vid is still helping people. thanks got my g to finally stop overheating i think… great vid

@nonaleeroman7861 3 года назад

You Sir, has explained the bleeding procedure the best of all. We thank you, we have a FX35 (2009) 178,000 miles, I love this vehicle, will never change it. Thank you. We are now a definite fan of urs. Be safe.

@alexandergarcia6588 Год назад

As long as you take care of an Infiniti/ Nissan these cars will last your forever

@thomasauto4862 3 года назад

This is one of the most complete and effective videos I've ever seen on You-Tube! Thank you! I had only filled mine with AF to the bleed tuce once, never knew to do it 3 times!

@alvarotoledo3696 4 года назад

Ive been sitting here watching every single video you have posted! You sir are awesome! I found out more about my car today then the last 6 years I have owned it. Just crossed 68k miles on my 2005 G35 coupe.

@notfuesh 2 года назад

niceee thats mint man i just hit 248k the other day lmfaooo still running strong

@mirjunior9864 2 года назад

Great landscapes & coolant bleeding well explained. Your patience helped me to bleed the small 1.5dci engine in my nissan. The heating core didnt work when I took it from the dealership. Now, after 3 rounds of bleeding with the front on a slope no more air in the system :-)

@luismijares8878 4 года назад

A year old but still very helpful! My 350 was good to go after the first set of revs

@murkyy.qctiv3122 2 года назад

For any current 35 owners don’t attempt to do a radiator flush or any hose replacement if you don’t have a coolant system refill kit , chances are you can bleed it by the bleeder valve but will take you all day if not 2 , but at the end of the day there will always be air in the system if not vacuumed out

@albanainani1455 9 месяцев назад

i diden bleed mine at all i just let is warm up and drove it and refilled it and afert 3 drives it was good and is ever since

@Aeneas137 2 года назад

I've watched about 20 videos about this today and yours was the most useful of them all so thank you.

@isaacjackson8537 3 года назад

Hey Bro Thank you for the DETAIL, clear instructions and visual. I have an 03 G35 sedan...I took 2 .5 weeks (after work hours) to grenade the dash and replace heater core, (whew!)....and replaced Thermo and radiator....I'm headed outside to follow this!

@Dancolemusic 5 лет назад

Thanks for being clear. Other videos made the process confusing

@nellywilson6740 5 лет назад

Great job dude! Very helpful video! Didn't have 6 goes at it but thanks for the perfect how to video!! G35 FOR LIFE!

@jedielectro 5 лет назад

cool vid mate. very similar bleeding rb engines.[ like in my r32 skyline I had] only difference is. you could keep bleeder valve out ,when running the engine. to bleed. but same process you did. along process. and recheck when its cold. nice one. keep it coming

@AZTombstone792 4 года назад

Good Video. Amazing how nice your car looks with 178,000 miles. Very nice. Thanks for the video.

@PlumbersSon 3 года назад

Just drained and filled Coplant yesterday, then refilled.. was told “this car doesn’t need to be bled...” and that’s why I’m here😂😂 saw 250 degrees last night and I knew something was up

@ethanalley5101 4 года назад

very helpful video thanks! just finished after my 5th repeat :D

@namegame2567 5 лет назад

You're the man bro. Keep doing what you do! Just remember 1 like of almost every video you make is me.

@ugrhuracan6349 5 лет назад

Thanks soo much! My car its not overheating anymore i did exactly how you did it and now its fixed! 👍🏼👍🏼

@juice323blue4 5 лет назад

When the temperature gauge went up did the electric fans come on?

@t.j.schaff2478 3 года назад

Great video and much respect my man. Just a note- a radiator fitted funnel makes the bleeding process much quicker... I've done it multiple times on my G: the air will rise out of the funnel as you rev the motor and you can crack the bleeder valve intermittently to help

@fernandocarrillo9900 2 года назад

you got a name for that funnel ? i’ve been trying to look for one

@shanemonroe2692 2 года назад

@@fernandocarrillo9900 I just got mine yesterday from Amazon brand is Thorstone. Same as the OEMTools one but cheaper and had next day delivery. That's if your in the states. You can search "coolant funnel kit" Unless you already found one 👍

@notfuesh 2 года назад

just got one earlier today from harbor freight for 30$ 🤝 my only question now is do i still follow the process of covering the valve cover, still do the rev up thing and wait for it to cool down?

@B1NO_O Год назад

@@notfuesh pretty sure it should go in and let air out as you rev it so if you need more you just put more in the funnle

@bangbang-ko2gi 10 месяцев назад

Can't you get one at harbor freight?

@playerboy76 5 лет назад

Thanks Man i appreciate it ! U helped me fix my friends G35

@kinpump4696 4 года назад

Fix what? What was wrong with it in the first place?

@dustinleeper1 3 года назад

was it shutting of like mine?

@gregjack8632 5 лет назад

Great video brother, you are very attention to detail on what you do !

@deasttn 5 лет назад

I have an 08 m35x and thinking about tackling this project soon. Glad to hear that Prestone works (so tired of everyone saying to go to stealership for OEM fluids).

@memphismonstaTV 5 лет назад

deasttn I been trying to bleed mine for days

@ThatStockG35 Год назад

I've been trying to figure out what I was doing wrong for days now, this helps so much

@robertdowney2141 4 года назад

Great video! Definitely helped me with my G35. Never have I seen such a pain in the Azz system to refill and wouldn't have guessed the problem had I not seen this video. So, thank you!

@tonysoze9695 4 года назад

Save me money that's man

@tonysoze9695 4 года назад

Thanks man

@geeaye64 5 лет назад

You know that you can clean that KnN air filter. At least you can use it as a backup when it's time to clean it

@robquimby9908 Год назад

After I did my swap I had such an issue bleeding my coolant system the air would not come out till I had this brilliant idea. I took one of those hand pumps put the hose on the overflow tube come out with the other hose in the gallon of antifreeze and kept pumping and pumping till I knew for sure no air was coming out the bleeder valve. I kept getting air to the point it blew apart my bleeder valve. They break easy. If you need a bleeder valve you can use a piece that comes in the Preston coolant flush kit at Walmart works mint

@MotordyneG35 Год назад

Good to know!

@foxxxxxi8814 5 лет назад

That's what I do but I do it with the engine running that way the fluid flows faster and you don't has to do this again and again , just make sure to refill the radiator reservoir to let the system fill with more fluid.

@deeplyrooted4358 2 года назад

THANK YOU FOR THIS VIDEO.

@dheerajrajeevan4867 3 года назад

Great & informative video! Only thing i want to add is to remember to screw back the plug underneath BEFORE you start pouring coolant in so it doesn’t immediately drain and waste the bottle of coolant you got. I almost made this mistake and I’m sure others might as well.

@badquality4069 3 года назад

Nah i got common sense

@Notchilldude 2 года назад

@@badquality4069 buddy we know you don’t even have a car

@badquality4069 2 года назад

@@Notchilldude i have 3 lol

@amunankh7868 4 года назад

Thx for this bro☮️

@marcosdsra 5 лет назад

thank you man for you video you help me to much

@rustydavis9709 4 года назад

Saved the day ! Fx35 bosses up

@hilariolara5352 5 лет назад

Hey man this was a very awesome video my car was overheating suddenly so I decided to replace the thermostat and it was still over heating then I replaced the radiator and still over heating then I followed your instructions and the overheating went away. I believe either the thermostat or the radiator was bad but I guess I didn’t bleed it properly right after I replaced both of the parts but anyways my car has a new thermostat and new radiator now after 100k miles which is good cause they will go bad eventually but if it wasn’t cause of your video I would have probably replace the water pump or something else so thank you very much.

@augustarellano197 4 года назад

I’m currently here right now, either the car needs to be bleed correctly or I need to replace my water pump. I’m crossing my fingers it’s just the bleeding. Any updates? Did it ever over heat again?

@searchdaone8130 3 года назад

August Arellano did you end up finishing?

@augustarellano197 3 года назад

Search Da One yes but didn’t wait to see if it would over heat again, I ran it for about a week and it was good then a friend kept bugging to sell it to him lol

@TheSleeds 3 года назад

@@augustarellano197 My overheat issue was due to radiator fan. If you can't feel it moving air when your looking down at the fan it is likely the cause. I was getting good readouts on my thermostat so quickly rules that out. Radiator fan is pretty common cause of overheating behind thermostat.

@whitewolfauto8199 3 года назад

Thanks for this video 👍

@gardenia1738 3 года назад

Very nice and clean g35.

@Mika30041975 5 лет назад

Thx. Clean job.

@klepetar 4 года назад

thank for this video.. you're patient and give us all details..

@MotordyneG35 4 года назад

I only have 1 request in return. Make sure you tell that bitch NO. Trust me, she will love you later. It's another trick, but better than the radiator flush.

@LosDaGhost973 4 года назад

@@MotordyneG35 wtf LMAO

@codymcnaryakasketchyinc565 3 года назад

Lookin Good With those Black Gloves Yo!

@fayzulchowdhury976 4 года назад

Helpful!

@edricstegall2088 11 дней назад

Thanks Bro🤝

@KGX470 4 года назад

Question...so my friend and I replaced the radiator and fluids and bleed it. I don’t remember if we went to the bleeder valve. Well...is it normal to have the radiator fluid reservoir tank filled PAST Max capacity? The thing is...I never filled it past Max ever. Thanks

@justinhuling6756 3 года назад

Its a pain checking the bleed valve over and over, I do mine with a "no spill" funnel from the front radiator cap to bypass this problem. It mitigates having to constantly open and check the bleed valve. No air in the line either because the consistent fluid kept it tye funnel is gravity feed from the highest point on the engine. Just a future tip. My water pump is still clean never changed it

@vqdrew1171 11 месяцев назад

you used the funnel so you wont have to open the valve ? i dont wanna keep opening the valve 😂

@neffect1635 4 года назад

Should you leave the car running with the bleeder air open and add fluid and stop when fluid comes out of the bleed air hole while the car is running that way you only have to do it once?

@twilson1973 4 года назад

Nice job

@shafty3047 2 года назад

I’m pouring the fluid with the bleeder valve and radiator cap open, so when I pour and the bleeder valve gets to the top, slowly after it goes back down, do I just keep pouring fluid slowly until it stops going down?

@KeySoz 5 лет назад

Would it be a bad idea to do this while having an exhaust leak? Just wondering, since my Z is both overheating and i have to get the ehxaust leak fixed.

@ryejunstenbesana4227 3 года назад

hey when your about to start the car up after filling the bleeder screw cap thingy, do you have to fill up the reservoir first then start it?

@coolantkid3428 Год назад

Excellent video, good job using Prestone which is superior to the OEM coolant. Is this fill of coolant still in the car? If so, how is it doing? Maybe you could make a "revisit" video showing the coolant condition today.

@alexiszarate5060 4 года назад

I have a 2007 g35. I drained my coolant system a month or 2 ago. And the hose where my bleeder value should be at isn’t there. It’s just one hose and that’s the hose that popped. How can I make sure this doesn’t happen again? And bleed my system properly

@adam_bh 2 года назад

So i did this process a few times and the car doesn’t overheat at all anymore but the heat on the car still doesn’t work. It only works very slightly when I’m holding the revs

@christianchavez5908 4 года назад

Thanks mine work now

@adanarceo4636 3 года назад

Hi what up motordyne. Is this procedure flush a 100% of the old coolant? Or you need to do something else to accomplish that. Thanks for sharing. 👍

@gerry3595 3 года назад

Great video. Bleeder screw same location on maxima 3.5l? Thanks

@Chapman1792 5 лет назад

Hey good DIY! Where did you get your mesh for your nismo bumper?

@michaelfiorentino4359 2 года назад

Wait so after coolant starts to come out the bleeder valve, do you plug it and pour the rest of the coolant until you’ve used up all 2 gallons?

@MauriiBoii 4 года назад

nice hopefully this is similar to my altima coupe vq35

@alexsierra4878 9 месяцев назад

How long does it take to bleed out the coolant system. It’s day 3 so far for me and I’m lowkey concerned. I do have some mods for the cooling system (Nismo Thermostat, CSF radiator and Mishimoto fans). I only did these mods cause I live in Arizona and it easily get to 110 on the most random of days

@glennmcfadden5355 2 года назад

When you first added coolant did you any heat at all? And did you notice if the thermostat open at all when you first added? My fx35 thermostat hasn’t open at all and I never get heat at any RPMs..

@mattc4780 4 года назад

Is there suppose to be cooliant in the resovor when doing this?

@DTUFINOPhotography Год назад

After bleeding and burping the system a bunch of times, my issue was a head gasket on my 2010 FX35 with 170K miles on it. Dropped off on Wednesday to do water pump, chains, and all gaskets, i guess i'll be picking it up next week sometime.

@dirkmanning8621 Год назад

I drive with a blown head gasket. I just keep topping off weekly. Burp every 2 months depending on driving speeds.

@MyBryant123 5 лет назад

Nice G Channel , following

@SV6SPD 5 лет назад

You'll have to bleed it through the radiator fill hole let it burp the bubbles till you only see coolant flowing in your funnel

@linares194 3 года назад

Was the coolant reservoir to the max level when you were bleeding it ?

@lukha225 3 года назад

I saw a floor jack in the back. How did you jack it up? Thx.

@sneakerguy2430 2 года назад

I changed my thermostat because it was old and rusted,and appart from that it didn't have a sensor. Now the engine overheats, and I've been trying to burp my car and alot of air bubbles come out when turned on. And it shoots coolant like a volcanoe, but when cold the coolant is barely shows inside the reservoir Please help

@Qkfltpdls777 Год назад

Prestone coolant offers longer life, but FSM says change every 48,000km or 2 years. What’s your coolant replacement interval?

@755hp 2 года назад

I used a spill-free yellow funnel to bleed my G35 Coupe’s system; hopefully, this worked.

@pureilluzions 3 года назад

why is my lower radiator hose always cold still after doing this?new thermostat installed.

@chacebusness6451 2 года назад

What if you do it two times and then it not burp anymore so you drive it outside with it all back together and when you rev it or start it you can hear coolant sloshing around?

@Mrkevi123 Год назад

Let's say we unbolt from place the radiator reservoir, and hold it up high while half way full. Then we turn the car on. Do you think this would bleed out the air properly? Idk, in my head it seems like it'll work

@jonahurban4552 4 года назад

could anyone help me out I have a 2007 g35x sedan and I had codes p0300 and p0021, so I changed my PCV valve and the p0021 seemed to go away...for now at least.. I tried to get the VVT out to clean it and inspect it but theres 2 hoses in the way that theres so way it will come out so if anyone could tell me how I can? back to it the p0021 went away but still p0300 I checked all coil packs and the one closes back to the passenger was covered in oil with oil all around the plug what could this be what should I get next or change?

@Joe_DeSantis 5 лет назад

How long have you been running the premix Prestone 50/50? I've read mixed reviews for the VQ on if you should stick with OE nissan blue/green coolant or not.

@binkaboi8087 4 года назад

Rex Erection been recorded that people don’t have problems with GREEN, quality coolants. oem if you want to be extra safe, but if you don’t cheap out too hard and know what you’re doing you should be fine

@marktorres214 3 года назад

What if the bleeder valve is full and the coolant level in the radiator doesn’t go down

@B1NO_O Год назад

is coolant cleaner solution safe to use on a g35 can i do that process before putting in my normal coolant?

@austinbradley3411 5 лет назад

Wow what an amazing g35 bro.great vid as always. My g35 some times runs warm but only when im at a red light but when i start rolling it levels back to normal.i changed my thermostat to a Nismo thermostat and i replaced the bleeder valve all from Z1motorsports and ever since i had this over heating problem.i bled the system several times but still the same.i even bought one of them 40 dollar funnel kits.im really just tired of the g. Lol.might get a foxbody again

@MotordyneG35 5 лет назад

Are your radiator fans broke? Once the engine radiator temps hit 195-200 the electric fans kick on. This always happens when the car is not moving. Doesn't sound like a bleeder problem.

@austinbradley3411 5 лет назад

I bought a Nismo radiator cap that had the metal Nismo plate on top of the cap i took it off and for some reason it runs perfect

@MotordyneG35 5 лет назад

@@austinbradley3411 ...so you bought a nismo radiator cap and a nismo thermostat. Any particular reason you believe you need these? Your street car is not a race car. You do realize a nismo thermostat opens much sooner than an OEM thermostat and the nismo radiator cap increases pressure raising the boiling point. I choose not to run nismo thermostat and cap for a reason on my street car that is dyno tuned.

@austinbradley3411 5 лет назад

I thought the nismo cap making the car run cooler would be a good thing.I guess I wasted money on this thing again.thanks for your info

@rafaelpelayo8592 4 года назад

Its your fans

@whoa2488 4 года назад

I won't lie I didn't have a bleeder valve on my Infiniti but I went and bought one and put it on there and I can say one thing that you did do wrong you should have drain the coolant while the car was at ground level it would have drained more fluid

@chrisyo295 Месяц назад

I try to add antifreeze but i don't see nothing in the bleeder, like yours. Am I doing something wrong

@bitronic1 5 лет назад

My coolant came out darker than duck shit green... New coolant in looked like highlighter yellow... Tho my car never overheated even when constantly pushed to over 6k rpm... I poored in coolant 5x as slow and I only had to bleed 3 times.

@rsfan010 5 лет назад

whenever i turn the key to ON position, i hear the liquid flowing behind dashboard. however, my 350z has never overheated so would this still be required to do?

@thedavemac23 5 лет назад

I have the same problem. Hopefully someone has an answer.

@rsfan010 4 года назад

@@thedavemac23 it's air in the system. you gotta purge it out. to make it simple, buy a spill proof funnel with adaptors (costs around $25) and you'll have it burped out in matter of minutes

@pedrocruz4120 4 года назад

I’ve been looking for this answer for the longest time

@binkaboi8087 4 года назад

Pedro Cruz should look up the g35driver forums. you would’ve found it on your first search

@boman4419 5 лет назад

Nothing like finding a secluded public spot to work on your car instead or your own house👌🏻

@MotordyneG35 5 лет назад

That is the top floor of my garage. I live in a high rise condo, this is my house.

@boman4419 5 лет назад

Motordyne G35 well shit. I guess that works too 😂

@boman4419 5 лет назад

Motordyne G35 I’m a high school student and so the garage is usually filled with my parents cars and I don’t think the home owner association would like my jacked up car in the street, so I do some of my mods in like secluded parking lots and stuff like that.

@namegame2567 5 лет назад

Maybe do another review on radar detection

@Ziggy619 4 года назад

Awesome content. Have you changed your thermostat? Do you know if it’s the same procedure for a 2008 M35?

@MotordyneG35 4 года назад

Thank you! It's the exact same engine, so yes same procedure.

@kaandogan8854 5 лет назад

does this apply to 05 350z as well

@srv2low4me 3 года назад

You really have to squeeze the hoses to help get the air out of the system.

@ARIOS44 3 года назад

Does this work for a 2005 g35 sedan as well?

@AU_Jason 4 года назад

Still the same method for a HR engine? 07 350z. Cheers mate

@alisterambler9262 4 года назад

Hey Bro I got a Problem with my G35 Sedan. Can you help me.my temp gauge is going up and down. does that mean that I need to replace my thermostat, and water pump? I don't know what it could be. Do you have any clue

@DoubleT90T 4 года назад

It means you have air in your system.

@crossangels9772 4 года назад

Yo man where you get that mesh grills from for the airdam?

@wyattracing_andreviews1155 2 года назад

being a g35 driver myself, shiuldnt that be green or blue coolant?

@ashe1928 Год назад

Mine didn't take two gallons to fill more like one and a half this ok?

3 года назад

thnx for the video and info. Will this be the same for the FX35. I can see a bleeder valve on my 2009.

@MotordyneG35 3 года назад

Fada Rome ...yes!

@LosDaGhost973 4 года назад

just recently my 07 g35x sedan started getting hot while sitting with a/c on or off. sometimes even while driving especially if i rev while parked.and i noticed fluid dripping on the floor.. when i opened the hood my reservoir was completely backed up and full. but all week it look like it's been emptying with me constantly having to put fluid in every few days.. any ideas?

@LosDaGhost973 4 года назад

any ideas or thoughts?

@Tuesflex 3 года назад

How does it release air if both caps are on?

@viplegaleducation1292 5 лет назад

Just did this on an 06 350z and yeah it is a pain right? Only thing I did differently is I actually poured coolant into the bleeder valve at first very slowly and then after putting cap back on I started up and revved it and the. Waited for the fan to kick on and then I slowly loosened the valve while it was running I believe and waited for the hissing to go away before taking it off completely. The whole time I was scared as shit I was gonna have coolant shoot up into my face but it never did and thankfully this way saved me a lot of time. Took about 5-7 times of this way but I didn’t have to open the radiator cap.

@MotordyneG35 5 лет назад

Interesting how even when you show people exactly how to do something according to the facory service manual, they decide no I am doing it my way. You are not the only one, but you are the only 1 who suceeded doing it different. People are funny. They do it differently than as instructed in this video and then take the time to message me asking why it didn't work for them?

@dabs7103 2 года назад

I just changed out my thermostat and when I poured back in the coolant I still have a good amount left over that didn’t go in but the radiator is full and the breather cap in the back is already filled up also , but my car started to overheat

@scotteberline5458 7 месяцев назад

Did you figure it out? @dabs7103

@SanerOne57 5 лет назад

Every time that you rev it and check the coolant , do you keep flushing it out or are you just topping off every time until it comes out of the bleeder valve ?

@MotordyneG35 5 лет назад

Topping it off. You would quickly figure out the other way is impossible. You are not draining fluid out of the system, you are getting the air out.

@salpal15 5 лет назад

I don’t think letting your engine warm up before adding coolant is the best idea

@q3rfasd2w88 4 года назад

Hello friends,i like your videovery much.Plz tell me how can i get the maintenance manual like yours.I live in CHINA,but there is nothing about my 06 g35 coupe.THX.