😂😂😂 I have built many of these however I just was not totally in the right frame of mind and made a mess 😂 but it all work out! I bet you I never make that mistake twice!! 🇺🇸🤝
Hello Jeff awesome stuff the only person I can find to build one of these can't wait till mine comes what bearings are those got a link and the diff cups wow
Nation Skander is where I got the bearings bro. Sorry I got busy yesterday. I can’t remember the number of the bearings but you can buy a whole a whole hpi Baja bearing kit from them and it’s cheaper than just getting the two bearings
@@moneyoverbeef Im assuming you are talking about the big outter bearings because now the IRC comes with oil impregnated bushings only for super stability. So with that being said the big bearings are 20x32x7 6804-2RS have a great day bro!
Do you have a video of how to get the rear diff out of the car? My baha ext was running fine for a while last night and then all of a sudden it's just revving out and barely moving. Spinning the wheels by hand both wheels move. I think either the diff split or a clutch problem
I dont think I have a diff removal bro. You will have to pull the whole transmission if you dont have a three piece trans case. If you turn one wheel and the other turns then the diff is probably okay. Not moving and revving out is caused by either an axel pin has broke or a diff pin inside the diff under the bigger gear spider gears could be broke as well and causing it to free spin.
@@eastsiderc broken dog bone pin for the second time. I think maybe the smaller tires aren't helping the matter. Ordered replacement dog bones and gonna put the stock tires back on. If that doesn't help I will save up to order the innovative rc UHD axles with the UHD drive cup kit.
Brother Judda I got it all over my fingers 😂😂😂! That 1 milly didnt wash off so well. I had to wipe it off good with paper towels and wash my hands a couple times with dawn dish soap. I need to find something that cuts silicone better! Maybe mineral spirits I dont know. I need ask my buddy Allen Im sure he will know whats best to use! Hope you are having a blessed day brother
@@eastsiderc that diff "fluid" look more like shoe goo then fluid. Guess it's great for field play, or drag racing. Curious what weight recommended for dirt off road track use? That diff turned out nice, tolerances looked great on everything.
@@eastsiderc Every day I get to put my hands together on the side of the dirt is a good day and try a lacquer thinner for cleaning your hands lacquer thinner strong it’ll dry your hands out but it usually gets all the yucky stuff off
hey bro 15mm OD 10mm ID and 4mm thick I sell bearing kits for bajas too very nice ABEC-1 quality smooth rolling bearings . and these come in the kit. 4 of them. under extreme power bushings should be used in place of the bearings. Thanks for watching
