Тёмный

INPA, NCS Expert, WinKFP, Tool32: EASY BMW Installation Guide 

Endless Money Pits
Подписаться 12 тыс.
Просмотров 76 тыс.
50% 1

Use BMW Standard Tools software to work on your BMW at home!
LINKS:
Installation Files: drive.google.com/drive/folder...
WinZip: www.winzip.com/en/download/wi...
K+DCAN Cable: amzn.to/3gCWLfC
20 Pin Adapter Cable: amzn.to/3sx2x81
Basic Laptop: amzn.to/3rRQSSb
Original write-up by Bali: www.e46fanatics.com/threads/h...
Amazon Prime Student Discount: amzn.to/3YzZNXk
Amazon Prime Discount for people with SNAP, Medicaid, etc.: amzn.to/3sfQpvW
Want to help the channel grow?
Support me on SubscribeStar: www.subscribestar.com/endless...
Support me on Patreon: / endlessmoneypits
Check out my merch!: endless-money-pits.myspreadsh...
Or make a one-time donation: paypal.me/EndlessMoneyPits?lo...
SUPPLIES USED:
• Windows 7 or better laptop with a charging cable
• K+DCAN cable with a switch
• 20 Pin Adapter Cable
• And installer files from my Google Drive
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
*Disclaimer*
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Авто/Мото

Опубликовано:

 

15 фев 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 313   
@javierherrera7575
@javierherrera7575 9 месяцев назад
I just installed and set this software up to use on my 2011 328i xdrive. I was having connection issues with car and software until I tried this. First verify that the Comm settings are correct as per the video. Start Inpa first, connect cable to laptop, turn power on in the car, lastly connect obd connector to the car. This was the only way I could get my e90 connected. The software had no issues and it works great 👍 Super big thank you to Endless Money Pits for providing access to the software and making a well explained video. You saved me tons of money and time!!!!!! Subscribed👌
@EndlessMoneyPits
@EndlessMoneyPits 9 месяцев назад
Glad you found a way to make it work! I don't have a way to troubleshoot issues like this so I pinned your comment to help others.
@PadmaDorjee
@PadmaDorjee 8 месяцев назад
Mate, I cant believe how easy you made this look. I have owned an E46 for 8 years snd have been trying to learn inpa for at least 4 years but never understood it, till now! THANK YOU so much for doing this.
@EndlessMoneyPits
@EndlessMoneyPits 8 месяцев назад
And thanks to Bali for laying it all out. I just made it into a video. Happy to help!
@t-hor8539
@t-hor8539 9 месяцев назад
I don’t think u realise how good of a tutorial this is! I know it’s the same steps as what Bali wrote up, but it makes so much more sense watching the whole process like this. Thank u, and Bali, for making this process so easy
@EndlessMoneyPits
@EndlessMoneyPits 9 месяцев назад
Thank you, I really appreciate that. This video took a lot of time to make. I'm hoping to make some videos about actually using this software but I haven't had time to do much with it myself yet. Thanks again!
@johnmarek8985
@johnmarek8985 2 года назад
Thank you, been looking for a decent tutorial for quite a while, much apricated.
@EndlessMoneyPits
@EndlessMoneyPits 2 года назад
You're quite welcome. I really enjoy making these videos, and this one forced me to learn some new things.
@arkmay1
@arkmay1 Год назад
Awesome, I was able to fix the airbag light on my 2005 X3! Thank you so much.
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Very good! Glad I could help!
@yngelly9497
@yngelly9497 Год назад
probably one of best tutorials if not the I’ve watched out of rest of them on RU-vid. GOODLOOKS
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Thank you, I appreciate the encouragement!
@aaronmartinez547
@aaronmartinez547 Год назад
Hey endless money pits ! Can you please help me with the download please! Ive been searching for someone to help me out with it. Can u help me remotely?
@yngelly9497
@yngelly9497 Год назад
@@EndlessMoneyPits after doing this help me bleed my brakes through inpa which was so easy and efficient. I followed another video before but after download inpa I let getting a bunch of errors. After reset my computer and doing this everything was good
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Just use the links I posted in the description and the instructions from the video. There's no trick to it.
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Oh good, that's something I wanted to try next since I saw the brake bleed option in the menu. Glad it worked for you!
@ozankara912
@ozankara912 2 месяца назад
cleanest representation on the internet, thank you!
@speciallynobody
@speciallynobody 7 месяцев назад
If you still have trouble connecting try to change the BM latency to 1msec (on the advanced settings window below COM port number). This fixed it for me.
@brianwolthers2762
@brianwolthers2762 2 месяца назад
you are a legend, Best description of how to install.
@EndlessMoneyPits
@EndlessMoneyPits 2 месяца назад
The man, the myth, the me. Happy to help, thanks for watching!
@Random.Adventures.
@Random.Adventures. 10 месяцев назад
This was an awesome tutorial everything explained perfectly.
@EndlessMoneyPits
@EndlessMoneyPits 10 месяцев назад
Glad it was helpful for you!
@brendanharris9197
@brendanharris9197 Год назад
Worked like a charm first time around. Thank you for making it so simply! Now to try and update my DME
@FanniCSIe92
@FanniCSIe92 Год назад
Brooo… Thanks a lot, You did a great job with this tutorial, I’ve been looking for this! I’ve bought a dcan cable, and they given me a 170gb folder to play with, and their instructions were way over my understanding 😢 Thankfully this video helped me! I wish You all the best!❤
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Glad to hear the video helped you! This stuff can be pretty complicated and I don't understand much of it myself.
@VincentMMoore0
@VincentMMoore0 Год назад
Thank you so much for making this video!
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Glad it was helpful for you!
@stephenawizen2539
@stephenawizen2539 Год назад
Thanks for sharing this!!
@unutamazlar
@unutamazlar Год назад
Mükemmel anlatım ❤
@mooncat86
@mooncat86 2 месяца назад
Great tutorial thanks!
@writernoob
@writernoob Год назад
Great guide, thank you very much !
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Glad I could help!
@peterschumacher-sm6be
@peterschumacher-sm6be Год назад
well done , many thanks for your help
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Happy to assist!
@kr9617
@kr9617 Год назад
Thanks for very good, clear tutorial
@EndlessMoneyPits
@EndlessMoneyPits Год назад
I'm just happy people are finding it helpful. Thanks for the comment!
@kr9617
@kr9617 Год назад
@@EndlessMoneyPits Yes it's very helpful trough all that useless talking ,,tutorials'' on youtube. Wondering maybe you can do some bmw e60 coding series ?
@EndlessMoneyPits
@EndlessMoneyPits Год назад
I only have an e46 to work with for now but I would like to do more videos like this. I haven't learned any BMW coding yet.
@ve2430
@ve2430 Год назад
Corbett Report moved on to doing e46 tutorials 😎
@joroboga8503
@joroboga8503 5 месяцев назад
Anybody else getting an error VIN is faulty while trying to use NCS Expert?
@leveluplife8585
@leveluplife8585 2 месяца назад
Chassis is faulty when I use the FA editors. It used to show me my modules at least
@peterkomninos122
@peterkomninos122 5 месяцев назад
Thank you for providing this easy install video. Question for you or the group, do you have a video that shows how to program in a new DME (MSV80) for an E70 using WINkfp?
@EndlessMoneyPits
@EndlessMoneyPits 5 месяцев назад
No, sorry. I haven't done any other videos with this software yet.
@HairyRichard-bd8rv
@HairyRichard-bd8rv Год назад
Thanks for taking the time to make this, and still be answering questions a year later! My Question is, what is that white thing you are plugging into your computer at 7:10? Will I need to buy one for myself along with the K cable?
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Oh, I probably should have mentioned that. My laptop only has a USB-C port, so the white thing is an adapter for this laptop that connects to USB-A, HDMI, and another USB-C. You do not need it as long as your computer has a USB-A port, which most do. I'm happy to help when I can, so feel free to ask if you have any other questions, and thanks for the support!
@HairyRichard-bd8rv
@HairyRichard-bd8rv Год назад
@@EndlessMoneyPits Legend mate, cheers!
@TheOnlyRaceEngineer
@TheOnlyRaceEngineer Год назад
SUBSCRIBED
@MrMogulMoney
@MrMogulMoney 6 месяцев назад
That Beamer is nice! That's the look I'm going for
@EndlessMoneyPits
@EndlessMoneyPits 6 месяцев назад
Thank you!
@MrMogulMoney
@MrMogulMoney 6 месяцев назад
@@EndlessMoneyPits Welcome! What year and model? I have 03 325i
@EndlessMoneyPits
@EndlessMoneyPits 6 месяцев назад
It's a 2000 328i with sport package.
@MrMogulMoney
@MrMogulMoney 6 месяцев назад
@@EndlessMoneyPits dope! Is that a m3 front bumper?
@EndlessMoneyPits
@EndlessMoneyPits 6 месяцев назад
Yes, it is an M3 replica bumper. Some people hate it but it looks good to me.
@miguelaguilera1947
@miguelaguilera1947 9 месяцев назад
Anyone know why windfkp wont show the FRM module i want to code it but i wont show under ecu family
@mikapatrikka1793
@mikapatrikka1793 День назад
Why my computer says in program compatibility setting that settings applied: for windows xp? Even my laptop has win7! It won't let me continue further 😢 It gives error 5: access is denied. Setup was unable to create the directory "C:\ediabas\api\exel"
@statesandu7770
@statesandu7770 Год назад
gooood
@adriansmith6530
@adriansmith6530 8 месяцев назад
A great and informative and clearly narrated tutorial! Will this work on a Windows 11 Laptop?? Thanks
@EndlessMoneyPits
@EndlessMoneyPits 8 месяцев назад
Good question! It should work on Windows 11 but I don't have a way to verify that. If you find out please let us know.
@markw3922
@markw3922 8 месяцев назад
Great information & work, what year are the process applicable to? Are these programs relevant to the e91 2006 . ?
@EndlessMoneyPits
@EndlessMoneyPits 8 месяцев назад
Thank you. I'm not sure about the e91 off hand.
@ThePelly
@ThePelly 11 месяцев назад
Apologies if this is a stupid question, or has been answered previously, but why does the laptop require a charging cable? Will this not work without the laptop being plugged in? Currently away for work and in shared accommodation, and would need a helluva long extension cable to reach the car. If it's not feasible, I'll just wait till I'm home next. Otherwise, great vid, very clear and concise. Thank you!
@EndlessMoneyPits
@EndlessMoneyPits 11 месяцев назад
It's just to ensure the laptop doesn't die in the middle of an important task. Same reason I put a tender on the car battery. This could cause major problems that possibly only a dealer could fix.
@brianviereck2862
@brianviereck2862 8 месяцев назад
Is it just me, but are others having their Virus shield go nuts over INPA? my put INPA i quarantaine?
@Jonathan-yz3gi
@Jonathan-yz3gi 9 месяцев назад
In NCS Expert it shows me the error Chassis is faulty. Can someone help me?
@lowey53
@lowey53 6 месяцев назад
I am curious as in the FAQ you say this set up should work with older BMW's I am looking for a diagnostic set up for my 1998 e36 323i to diagnose an abs and traction light will this set up work for me reading those codes? Iv been looking for ages for an answer on this so any help would be amazing.
@EndlessMoneyPits
@EndlessMoneyPits 6 месяцев назад
I don't have a way to test that but give it a shot and let us know if it works! It's free to find out.
@Jxck_e46
@Jxck_e46 Год назад
Do you have or could you make a video the same as this but about NCS dummy? This really helped me but I’ve been struggling to find a similar videos to this detail
@EndlessMoneyPits
@EndlessMoneyPits Год назад
I'll put it on the list but I don't have any experience with NCS yet. I'll start learning about it soon. Thanks for the suggestion!
@rulebraking
@rulebraking 5 месяцев назад
Thanks!
@EndlessMoneyPits
@EndlessMoneyPits 5 месяцев назад
Thank you!
@rulebraking
@rulebraking 5 месяцев назад
@@EndlessMoneyPits Hi - you’re welcome - awesome video. But I hit a snag! Been using a German lang version of INPA which was working fine but driving me nuts!! Uninstalled it. Downloaded yours but your compatibility program would not run on my Win-10 laptop - so I extracted files with the Win-10 file manager extractor (which I understand does the same job as WinZip), which of course didn’t create the Desktop icon shortcuts. The port configured to Com1 with no issues. Ran INPA from Bin folder and I experienced some weird behavior - (1) when I first plugged the cable in, I got the two black circular indicators as active, without it being plugged into the car (E93)!! Very weird! When I plugged into the car I also found that the indicators appeared to work, then not when interrogating the engine! (2) I restarted and reconnected to ensure I had a live connection but again when I tried to identify the engine it came back with “Error compiling script file!” Qs; regarding 1- with my German version, port configured itself under USB or other but not under Ports! Know anything about this? 2- does the compatibility prog do any particular arrangement/creation of subdirectories that is causing the program not to find some execution files? Any pointers would be helpful. Many thanks
@rulebraking
@rulebraking 5 месяцев назад
Ah - ignore above - figured it out! "INPAload" is the actual INPA executable file! Everything appears to work fine. Are there any other quirks i need to know to run other programs as the setup does not work for Win11? Correction to above, my PC is 10 but laptop is actually Win11 (which i hadn't realized) and the answer to other comment Qs) Cheers
@ytdme7720
@ytdme7720 9 месяцев назад
Hi again so I got the ecc app into my c drive and I have the 3 folders now ! So when I get the cable and plug it in it would the driver instal them selves ? Or is there something I need to do for the k cable ?
@EndlessMoneyPits
@EndlessMoneyPits 9 месяцев назад
Just do exactly what I did in the video.
@TheJDB65
@TheJDB65 8 месяцев назад
Think I have a problem as I never see Ports in Device Manager even after installing FTDI drivers and even have the same cable as you Oregon. Maybe it’s because I have Win 10 Home? Any workarounds for that?
@EndlessMoneyPits
@EndlessMoneyPits 8 месяцев назад
Hmmm it should work on windows 10. Make sure you don't have any pending windows updates. If all else fails, try on a different computer.
@aosdnasdmas
@aosdnasdmas 8 месяцев назад
would you be able to use an MHD adapter i have the black one where i can plug ethernet cable into with tool32?
@EndlessMoneyPits
@EndlessMoneyPits 8 месяцев назад
I'm not sure but please let us know if you find out.
@mackshackgabe
@mackshackgabe 8 месяцев назад
I have a dedicated laptop with bmw scanner 1.4 running xp. I get the future proofing benefit of wind 7 but can I run these standard tools on xp? I’m mostly interested in updating the software on my e46 m3 to see if it’ll help connecting to the emissions computer so I can get my inspection done (currently no communication, it just times out. generic obd2 scanner and Bmw scanner 1.4 works fine aside from no live data)
@EndlessMoneyPits
@EndlessMoneyPits 8 месяцев назад
You can try but the FAQ for this write-up says that Windows XP is no longer supported by most software including chrome.
@racingboy1779
@racingboy1779 Год назад
Got it all hooked up it’s connected to the car and when you try to do something it says no response from control unit please help I am trying to code this new headlight module
@EndlessMoneyPits
@EndlessMoneyPits Год назад
All the troubleshooting and FAQ is at the end of the video. If that doesn't help you then send a message over to Bali at the e46fanatics forum and he can likely help. He's the expert on this stuff, definitely not me.
@ANTIWRAPPAINTCLUB
@ANTIWRAPPAINTCLUB 2 месяца назад
having trouble with win11 doesn't show a test program option in troubleshoot compatibility.
@EndlessMoneyPits
@EndlessMoneyPits 2 месяца назад
Try another computer not running windows 11
@per-amundheggeli5436
@per-amundheggeli5436 4 месяца назад
When clicking on the troubleshootcompatibility button here (1:19) my pc says it dose not have a app to open it. what do i need to download? also can i use this software to find the problem my e46 have? its switching by it self if it want to roll the starter or not when turning the key and i can not find the problem...
@EndlessMoneyPits
@EndlessMoneyPits 3 месяца назад
Make sure you don't have any pending windows updates.
@matthewcole2268
@matthewcole2268 7 дней назад
Hi I managed to install this. First time I've ever managed to get INPA working after many failed attempts! However, this version doesn't have functionality to be able to run SMG adaptions and bleeding for my E46 M3. Do I need a different version and how can I get this?
@EndlessMoneyPits
@EndlessMoneyPits 6 дней назад
Hmm I'm surprised to hear that. I honestly don't know too much about this software so I don't have an answer for you, unfortunately. Have you looked on the e46fanatics forum?
@cricketscorner566
@cricketscorner566 8 месяцев назад
Tired installing BMW Standard tools on Windows 10 Version 22H2 and it errors out at setup because only Windows NT 4.0 Windows XP Pro are supported. Also would the Bimmergeeks cable be the best one for this software if I get it installed
@EndlessMoneyPits
@EndlessMoneyPits 8 месяцев назад
Worked for me on Windows 10 but I'm not sure which update I was on. I've never used Bimmergeeks for anything.
@jenspolte5712
@jenspolte5712 Год назад
Great video! However, once I connected the cable (only to computer not to OBDI) then start INPA it shows two black dots 'Battery On' AND 'Ignition On' . Any idea?
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Hmm that's no good. I would restart the computer and try again. Windows updates may be needed but that's just a guess. If it does the same thing, see if you can connect to the car anyway. If you can't get it to work, I would try a different computer. I can't really help beyond that. I'm not sure what would be causing this problem.
@jpmarketingllc6286
@jpmarketingllc6286 Год назад
@@EndlessMoneyPits Thank you for your very quick reply! Seems like even though I see both black dots (w/o being connected to car) once I connect I still can communicate with car. I donwloaded all the control module data and was able to clear errors. However, if I go to 'Chassis' then 'DSC' and then 'Activate' I get the error message "Not matching versions, misfunctions possible SGBD Version 6.0, SGBD version 21.0 INPA version 6.0" . Once I click 'OK' I see what I expect which is the DSC bleeding procedures. Anything to worry about or all good? Thank you so much for your help!
@EndlessMoneyPits
@EndlessMoneyPits Год назад
That is a question only Bali can answer. He's the guru with this software. You can contact him on the e46fanatics site I linked to in the description. Wish I could help more but this is too technical for my experience.
@nunkyfelson46
@nunkyfelson46 6 месяцев назад
Hey dude, thanks for the video ! I did It few times ago on another laptop and it worked at the first time. But now, I installed and follow all the process on another laptop and INPA won’t recognize the ignition. I’m stuck. Everything seems ok (com port 1/ good folders/ plug process) Can you help me please ? Thanks 🙏🏼
@EndlessMoneyPits
@EndlessMoneyPits 6 месяцев назад
Hmmmmmm Make sure all windows updates are complete. Restart computer after installation. I don't know if this works with Windows 11. If all else fails, try with another PC.
@AK-pm6nu
@AK-pm6nu 2 года назад
Hello, first i will thank you for this video. I have installed everything on the exact same way how you tell. But when i open INPA i can't see the model of the bmw cars. Only what i see is f1 for information and f2 for script and f10 for end. I can't select the option for e46. What is the problem?
@EndlessMoneyPits
@EndlessMoneyPits 2 года назад
I'm not sure but it sounds like the program didn't install correctly. I would try uninstalling and starting over. If that doesn't work I would try it on another computer. There shouldn't be any problems like this.
@adangarcia1409
@adangarcia1409 Год назад
Everything worked but I am missing the Daten files for e89 and can’t access it when I select chassis in ncs
@EndlessMoneyPits
@EndlessMoneyPits Год назад
It sounds like this version of INPA may not support the e89 chassis. I'd recommend contacting Bali directly on the e46fanatics forum to confirm this and see if he knows where to get a newer version of the program. He usually responds pretty quickly.
@thisguyshorty3554
@thisguyshorty3554 6 дней назад
As of 6/26/24 when I try opening any of the shortcuts. It says this shortcut refers to has been changed or moved, so tbis shortcut will no longer work properly
@EndlessMoneyPits
@EndlessMoneyPits 6 дней назад
Weird. Try reinstalling?
@harrisonpughe
@harrisonpughe 8 месяцев назад
Hi, trying to download the bmw standard tools setup from your link but for me it says there is a HTTP error?
@EndlessMoneyPits
@EndlessMoneyPits 8 месяцев назад
It still works for me but is very slow. I think it must be an issue on Google's end. If all else fails, you can download the installation files from the original write-up that's also linked in the description.
@ytdme7720
@ytdme7720 9 месяцев назад
Hi I’m stuck on ec-apps part and I’m not quite sure how to extract the file to the driver with winzip I don’t get the same tab as you were it say extract not sure what I did wrong and I was hoping I could get some pointers thank you love the vids
@EndlessMoneyPits
@EndlessMoneyPits 9 месяцев назад
Thank you. It may say some other variation of "extract", or the extract comand may be in a slightly different menu location, but that should still do the job of decompressing the files so you can use them. I hope that helps.
@ytdme7720
@ytdme7720 9 месяцев назад
@@EndlessMoneyPits yea that’s the thing idk where mine is lmaoo and doesn’t really show like yours does in 3:31 so at this point I’m confused on what other step I can take
@EndlessMoneyPits
@EndlessMoneyPits 9 месяцев назад
Did you install WinZip?
@ianmatterson5632
@ianmatterson5632 Месяц назад
i would love you to do a ccc to cic software/vin number changing tutorial, thanks for the tools fella , don't look back or return to a 9 yill 5 jon...
@EndlessMoneyPits
@EndlessMoneyPits 8 дней назад
Thanks for the suggestion! I'll have to look into how to do that.
@cooly350
@cooly350 3 месяца назад
Thank you so much, God bless you Worked perfectly E39 👍🏽 Is there a chance to get the code errors in English language ?
@EndlessMoneyPits
@EndlessMoneyPits 3 месяца назад
Thank you! If you selected English when installing the programs then there may not be another way to get the errors in English. I haven't actually used these programs lately but when I used INPA years ago (before making this video) the entire program was in German and was difficult to install. It is German software, so I'm really not sure if it's even possible to get the errors in English. Sorry I'm not more help.
@cooly350
@cooly350 3 месяца назад
Your help was appreciated Thank you
@SweetSwissCheese
@SweetSwissCheese 5 месяцев назад
The only SP-Daten files available for NCS dummy are e39 and e46. I'm trying to turn aux on in e87 116i. Please could you provide a link to download the relevant Daten files? Bimmergeeks is unavailable. Is there no way to get the files for this, i.e. is it now not possible to use this software for anything other than e39 and e46? Are the relevant DATEN files installed alongside the K-DCAN driver software/when it is plugged into the car? If not, does the original NCSEXPER/DATEN folder come with all the relevant chassis'? If so is it worth not deleting this folder and replacing it with the contents of ec-apps? Or is there a specific reason why we do this that would prevent the app from running?
@EndlessMoneyPits
@EndlessMoneyPits 2 месяца назад
The software and files provided in the video description are all I have. I'm not sure about the K-DCAN software you are asking about. Sorry I can't be more helpful. BMW has been cracking down on sites supplying these files so that's why they may be hard to find.
@SweetSwissCheese
@SweetSwissCheese 2 месяца назад
@@EndlessMoneyPits The software actually came with the cable on a disc. The rest of the tutorial was great
@themfactor5629
@themfactor5629 Год назад
Great video. Can I use this on my '08 E66 750li 4.8 v8 and '05 X5 E53 4.4 v8 and '05 545i 4.4 v8 on windows 10 laptop?
@EndlessMoneyPits
@EndlessMoneyPits Год назад
It should work on the '05 but I'm not sure about the '08. Let us know if you try it and find out!
@arebelfromhell
@arebelfromhell 8 месяцев назад
what are the other applications on my desktop ncs expert, tool32, and winkfp?
@EndlessMoneyPits
@EndlessMoneyPits 8 месяцев назад
All part of the BMW standard tools package but don't ask me how to use them.
@demcogerritsma2787
@demcogerritsma2787 3 месяца назад
I keep getting the error: chassis is faulty. I read that I should select the e89 chassis for my e91 but I don’t know how to bypass the fault
@H2oNoxious
@H2oNoxious Месяц назад
me too
@houltwang5964
@houltwang5964 4 месяца назад
Download the app but when I try to run the installation, it says only support window NT or xp professional system, please help
@EndlessMoneyPits
@EndlessMoneyPits 4 месяца назад
It should work on newer systems. Try reinstalling?
@MS-we4wi
@MS-we4wi Год назад
Thank you for making this great guide! I see windows 7 is the best choice. I can get windows 7 pro 32bit, is that okay?
@EndlessMoneyPits
@EndlessMoneyPits Год назад
That should work but I haven't tried it. Let us know! If you want to upgrade to another version of windows, you can find very cheap windows product keys at whokeys dot com.
@allenalto7625
@allenalto7625 3 месяца назад
Hello Endless Money Pits, do have an INPA version that supports E89?
@EndlessMoneyPits
@EndlessMoneyPits 3 месяца назад
No I do not, sorry.
@Rawly84
@Rawly84 Месяц назад
hello, thanks for the video. it works with enet cable? thanks my friend!
@EndlessMoneyPits
@EndlessMoneyPits Месяц назад
I have no idea but let us know if it works for you.
@mangekyosharingan3020
@mangekyosharingan3020 9 месяцев назад
Thank you so much for this video! How could we help out the channel
@EndlessMoneyPits
@EndlessMoneyPits 9 месяцев назад
You're very welcome! If you'd really like to help the channel there are links in the video description to donate, subscribe to my patreon or subscribestar, and to buy merch. Thank you so much!
@Subzy
@Subzy Год назад
Hi, does this software/download link still 100% work (INPA specifically), and work on the E87 2009?
@EndlessMoneyPits
@EndlessMoneyPits Год назад
It should all work as stated in the video. The files are on my Google drive and I haven't changed anything since uploading.
@ButterBallBB
@ButterBallBB 11 месяцев назад
is this compatible with the 08 528i e60? also does virus protection need to be disabled? when i unzip the files to the c drive it blocks 2 files because of virus protection
@EndlessMoneyPits
@EndlessMoneyPits 11 месяцев назад
Yes this should work with your e60 from what I understand. I did not need to disable virus protection for this but it's possible you might need to.
@Daudi0
@Daudi0 9 месяцев назад
I don't know if I missed this in the video but most responses on the software when I check for errors are in German. Is there a way to change settings so that results are in English?
@EndlessMoneyPits
@EndlessMoneyPits 9 месяцев назад
That is strange. Did you download the software from the link I provided?
@Daudi0
@Daudi0 9 месяцев назад
@@EndlessMoneyPits Yes I did.
@EndlessMoneyPits
@EndlessMoneyPits 9 месяцев назад
Hmmm... I would reinstall and make sure to select the language you want. You could have easily missed it.
@sychodefender
@sychodefender Месяц назад
I have the same problem, some modules are in German, some in English. I definitely selected English in the set up.
@eaglerider94
@eaglerider94 2 месяца назад
I am receiving the infamous IFH-0006: COMMAND NOT ACCEPTED message. Can't seem to figure out how to resolve this. Can you help? Also when launching BMW Coding Tool, receiving MSCOMCTL.OCX or one of its dependencies not correctly registered: a file is missing or invalid.
@EndlessMoneyPits
@EndlessMoneyPits 2 месяца назад
I hadn't heard of this issue before. Windows 11 seems to be giving people trouble so try windows 10 or earlier and make sure all Windows updates are complete. Then restart the PC and try reinstalling everything from this video. One final restart may be needed. At least, that's what I would try.
@eaglerider94
@eaglerider94 2 месяца назад
@@EndlessMoneyPits Thanks for the reply. I have Win 10Pro but I'm getting a warning re: CDM21228_Drivers_Setup files". Can't scan file for viruses, ex-app.zip(710.1MB) exceeds the maximum file size that Google can scan. Only download the file is you understand the risks, so I hesitated to open it. Is that normal?
@dssweigart
@dssweigart Год назад
Installed and works perfectly, however 2007 BMW X5 (E70) is not available in the menu. Is there a way to add it?
@EndlessMoneyPits
@EndlessMoneyPits Год назад
I keep reading that the E70 is supported in INPA, but the software does not have an option for it. I don't understand. I did find out that the E70 requires a D-CAN cable instead of the K+CAN cable I used in this video. I would recommend contacting Bali on the E46 fanatics forum with this question. I guarantee he knows the answer.
@dssweigart
@dssweigart Год назад
@@EndlessMoneyPits SOLVED. I followed the complete instructions at ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fGpAXDaS9TI.html and not only was the E70 available but I was able to monitor the real time air conditioning temperature readings (Analog) that I needed. It takes a few hours to download the sp-datem, however once downloaded I only had to install the Base and E70 datems for my purposes.
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Wow, I'm glad you figured it out so fast! I will have to check out that video when I have more time. Thanks for sharing the solution!
@Maddog93T
@Maddog93T Год назад
I don't have an option to Extract all what would be the issue? Running windows 7
@EndlessMoneyPits
@EndlessMoneyPits Год назад
That's a strange issue. Here's the best answer I could find. Hope it helps: answers.microsoft.com/en-us/windows/forum/windows_7-files/extract-option-not-available-to-unzip-files-in/4e3cec55-716e-e011-8dfc-68b599b31bf5
@tomasstancel8709
@tomasstancel8709 4 месяца назад
i need help the program say "the system cannot find the path specified"
@EndlessMoneyPits
@EndlessMoneyPits 3 месяца назад
Try reinstalling or try a different computer.
@JamesBond-hy4kv
@JamesBond-hy4kv Год назад
Wow this is great. Can I use it with an E39 too?
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Yes, this should work with the E39 chassis.
@zitexjp1296
@zitexjp1296 Год назад
Will you do the remote coding ? Did you know how to code the E93 combox retrofit ?
@EndlessMoneyPits
@EndlessMoneyPits Год назад
This video and the airbag reset video are the only videos I've done like this. Somebody else actually wrote up this entire procedure and asked me to make a video out of it, but I really don't know much about this topic. I'm not even sure what you are asking to be honest, lol... Sorry I can't help with this one, but I would bet there is information about this for you at the e46fanatics website. You can also message Bali directly there about this question.
@ssmurkish9199
@ssmurkish9199 2 месяца назад
Does this still apply to today? Would I have to get anything different ?
@EndlessMoneyPits
@EndlessMoneyPits 2 месяца назад
I don't think anything has changed.
@carterlarson5729
@carterlarson5729 13 дней назад
I figured out the extracting part. When I plug my d-can in it shows up as (Other devices) D-CAN
@carterlarson5729
@carterlarson5729 13 дней назад
I don’t know what went wrong as yours shows up as ports and you are able to access it and change the comm
@EndlessMoneyPits
@EndlessMoneyPits 9 дней назад
Hmm I really don't know the answer to this one. Let us know if you figure it out. Sorry I can't be more helpful.
@512invest7
@512invest7 5 месяцев назад
I followed your steps but cannot get E70, am I doing somehting wrong?
@SweetSwissCheese
@SweetSwissCheese 5 месяцев назад
Are you also not finding the SP DATEN file for the chassis when loading ncs dummy?
@saadiewaadie
@saadiewaadie Год назад
Will the BMW Standards Tool work with ELM327 scanners?
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Good question! I don't have an ELM327 but let us know if you try it and if it works.
@mos.f5810
@mos.f5810 2 месяца назад
Hi , I have a ENET cable can I use this software with my cable ?
@EndlessMoneyPits
@EndlessMoneyPits 2 месяца назад
I don't think so but let us know what happens.
@mos.f5810
@mos.f5810 2 месяца назад
@@EndlessMoneyPits yes worked like a charm . i just change the interface to ENET on EDIBAS tool32 configuration .
@EndlessMoneyPits
@EndlessMoneyPits 2 месяца назад
Excellent! That's great to know, thank you.
@yezenquzah1078
@yezenquzah1078 Год назад
does the same process apply for a enet cable for my 5 series
@EndlessMoneyPits
@EndlessMoneyPits Год назад
It looks like those cars use the enet cable with a different program called E-Sys. I have not worked with that program yet.
@draketrebon74
@draketrebon74 2 года назад
Could this be adapted to use drivers for a j2534?
@EndlessMoneyPits
@EndlessMoneyPits 2 года назад
You'd have to ask Bali about that one. There's a link in the description to the forum where you can contact him. He's the guru on this topic.
@simplelangperorock
@simplelangperorock 4 месяца назад
Hello, Will these files work with e90? 2011 328i xDr?
@EndlessMoneyPits
@EndlessMoneyPits 3 месяца назад
I don't have a way to test that but let us know if it works for you.
@houltwang5964
@houltwang5964 4 месяца назад
There is no mini r56 in inpa, please help 😢
@EndlessMoneyPits
@EndlessMoneyPits 4 месяца назад
Sorry, I'm not familiar with software for your Mini. Hopefully someone can recommend the right program for you.
@carterlarson5729
@carterlarson5729 13 дней назад
I am unable to continue since I do not have an option to extract all with winzip
@EndlessMoneyPits
@EndlessMoneyPits 13 дней назад
Use the bult in windows unzipping tool or download winzip.
@carterlarson5729
@carterlarson5729 13 дней назад
I just don’t have the option to extract all when I right click. I have winzip installed. I to have options to unzip but not the extract button like u had
@EndlessMoneyPits
@EndlessMoneyPits 13 дней назад
I don't understand. Extract or unzip, whatever it let's you do. Did you restart after installing winzip?
@ve2430
@ve2430 Год назад
Mine won't open. Says shortcut has been moved or deleted. Please help Edit: found the .exe file in EC-PPS bin folder.. "the code execution cannot proceed because api32.dll was not found. Reinstalling the program may fix this problem" .. could this be happening because I created a folder called INPA on the desktop and moved everything there?
@EndlessMoneyPits
@EndlessMoneyPits Год назад
That could be the reason. Instead of moving everything to that folder, just make shortcuts to the programs in that folder (right click / send to desktop). That should keep everything working.
@ve2430
@ve2430 Год назад
@@EndlessMoneyPits I think I understand what you mean.. so basically the program HAS to live on the desktop with all its files? Seems strange. I have a feeling the installation was somehow incomplete. Some of the files said were "not synched" in windows 10.. I will try to reinstall
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Well, you can choose where you want the installation files to be during installation, but the shortcuts to open the programs will go to the desktop by default. As long as they are shortcuts, you should be able to move those to any folder you want but the installation files have to stay in the location where they were installed.
@ve2430
@ve2430 Год назад
@@EndlessMoneyPits it worked after reinstall!💪.. I think the problem was I didn't install to C:/ but installed to what came up first which was the ec-apps folder in downloads instead of switching it to C:/ .. thanks a bunch! Much appreciated. 🙇‍♂️
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Glad you got it sorted out!
@TheGuster
@TheGuster 7 месяцев назад
can I use a Mac with parallel installed so I can run windows 10?
@EndlessMoneyPits
@EndlessMoneyPits 7 месяцев назад
Probably, but you'll have to try and let us know if it works.
@TheGuster
@TheGuster 7 месяцев назад
@@EndlessMoneyPits will do🫡
@aw6993
@aw6993 2 года назад
After restarting, I don’t have the operating system (c) on my laptop???
@EndlessMoneyPits
@EndlessMoneyPits 2 года назад
That shouldn't happen just from installing the program. Can you boot up in safe mode? There might be an issue with your computer.
@aw6993
@aw6993 2 года назад
@@EndlessMoneyPits thanks for the quick reply. I will restart and start the process again.
@garrettgiuffre7298
@garrettgiuffre7298 Год назад
I for one would say. I would like to see you incorporate a few topless college girls trying to make a honestly living during these hard times. But that's just me
@EndlessMoneyPits
@EndlessMoneyPits Год назад
I'll see if I can find some
@JustJayy91
@JustJayy91 Месяц назад
no FRM files show up in winkfp, how do i fix that?
@EndlessMoneyPits
@EndlessMoneyPits Месяц назад
If using Windows 11, try running in compatibility mode. If not, try reinstalling or try a different computer.
@JustJayy91
@JustJayy91 Месяц назад
@@EndlessMoneyPits I am running on windows 10.. i do get some ecu family options pop up but only about 10 and none are frm related, inpa works fine so i know the cable is good and i did code my dsc with tool32 the other day.. however never used ncs expert for anything as of yet.. so it may just need up to date files.. however you probably know more than me about this stuff 😂… also i will had this is a second hand frm2 and it is compatible part number ( if that makes a difference)
@HijjazAzwan
@HijjazAzwan 11 месяцев назад
Do you have guide to install ncsdummy?
@EndlessMoneyPits
@EndlessMoneyPits 11 месяцев назад
No, maybe I should?
@KDips18
@KDips18 4 месяца назад
Wheres the best place to download WINKFP software hopefully for free?
@EndlessMoneyPits
@EndlessMoneyPits 4 месяца назад
There's a link in the video description
@KDips18
@KDips18 4 месяца назад
@EndlessMoneyPits is there? I couldn't find it, is it the same link for the BMW STANDARD TOOLS? is it within one of those zip files? If so, thanks for your help mate. As I'm just downloading it for a friend who wants to use it on his "BMW 330ci E46" Sorry if I sound thick, but we've already got INPA installed on a laptop. So would I need any of those softwares? Or can I just use INPA to do it all?
@aaronmartinez547
@aaronmartinez547 Год назад
Hey bro im having a hard time doing the download part to my files and extracting ! I cant seem to find all that stuff once i paid for the software! Can u help me out ?
@EndlessMoneyPits
@EndlessMoneyPits Год назад
What software did you pay for? This should all be available for free.
@aaronmartinez547
@aaronmartinez547 Год назад
@@EndlessMoneyPits i went ti bimmer geeks and bought the coding licenses
@aaronmartinez547
@aaronmartinez547 Год назад
@@EndlessMoneyPits i couldnt find any on the website for free
@EndlessMoneyPits
@EndlessMoneyPits Год назад
I have links to everything you need for free in the video description. Not familiar with bimmer geeks.
@aaronmartinez547
@aaronmartinez547 Год назад
@@EndlessMoneyPits so that software will allow me to code modules for e90s ?
@SeeOh
@SeeOh Год назад
Will I be able to run this software on my 2015 MacBook 💻 ?
@EndlessMoneyPits
@EndlessMoneyPits Год назад
I'm not sure about Mac but I've run INPA on a PC from 2004 running Windows XP. These are old programs.
@SeeOh
@SeeOh Год назад
@@EndlessMoneyPits appreciate your quick response !
@erykherrmann9594
@erykherrmann9594 11 месяцев назад
does not want to connect to the car. cable check Program installed Edit to Com1 in all the places you went through.
@EndlessMoneyPits
@EndlessMoneyPits 11 месяцев назад
If you've already gone through the FAQ at the end of the video, check the comments here for ideas.
@javierherrera7575
@javierherrera7575 9 месяцев назад
I had this problem with my e90…. If all the settings on the Comm are correct then start Inpa then connect the cable to the laptop turn power on in the car and lastly plug obd connector to the car. This was the only way my works. I did the install and set up how the video explains but connected it in different steps….. good luck
@erykherrmann9594
@erykherrmann9594 9 месяцев назад
@@javierherrera7575 Thanks, its works
@15RealMadridCR7
@15RealMadridCR7 Год назад
Can you tell me what specs do I need on my laptop?
@EndlessMoneyPits
@EndlessMoneyPits Год назад
Windows 7 or higher. 32 or 64 but should work.
@TheVolvoManiac
@TheVolvoManiac Месяц назад
Do you have the files for F series?
@EndlessMoneyPits
@EndlessMoneyPits Месяц назад
No, sorry.
@carterlarson5729
@carterlarson5729 13 дней назад
Do you have to purchase winzip?
@EndlessMoneyPits
@EndlessMoneyPits 13 дней назад
No, it's free.
@user-dg6ed1mj4h
@user-dg6ed1mj4h Месяц назад
Where do you download the program from?
@EndlessMoneyPits
@EndlessMoneyPits Месяц назад
Links are in the video description.
@mcmonster5300
@mcmonster5300 8 месяцев назад
I can't download files(bmw standard tools) pls fix link again
@EndlessMoneyPits
@EndlessMoneyPits 8 месяцев назад
It still works for me but is very slow. I think it must be an issue on Google's end. If all else fails, you can download the installation files from the original write-up that's also linked in the description.
@klebanjanusz280
@klebanjanusz280 4 месяца назад
Will this work on my 2012 328ix sport wagon?
@EndlessMoneyPits
@EndlessMoneyPits 4 месяца назад
I don't think so. I'm not seeing an option for that car in the software.
@klebanjanusz280
@klebanjanusz280 4 месяца назад
Would you be able to recommend one?
@EndlessMoneyPits
@EndlessMoneyPits 4 месяца назад
Sorry, I am not familiar with software for that car.
@klebanjanusz280
@klebanjanusz280 4 месяца назад
Ok ty 😏, btw nice tutorial 😉
@EndlessMoneyPits
@EndlessMoneyPits 4 месяца назад
Thank you!
@norbert-k
@norbert-k 2 года назад
Can these be installed to an external hard drive? Company laptop life 🙄
@EndlessMoneyPits
@EndlessMoneyPits 2 года назад
From what I understand, that should work. I have not tried it personally, so no promises. Please let me know if you try it.
Далее
HOW TO CODE YOUR BMW USING NCS EXPERT | WINDOWS 10
36:08
Фэйворит жвачка А? (2024)
01:00
Просмотров 368 тыс.
The last one surprised me! 👀 🎈
00:30
Просмотров 6 млн
BMW INPA Engine Diagnostics EXPLAINED!
31:24
Просмотров 47 тыс.
The EASIEST Setup Guide INPA and NCS EXPERT
17:02
Просмотров 432 тыс.
BMW INPA NCS Expert WinKFP Tool32 Windows 10 Install
7:21
How To Install INPA & NCSExpert
15:58
Просмотров 235 тыс.
Lighting System ! FRM Repair !
20:19
Просмотров 87 тыс.
Мгновенная карма 😱
0:10
Просмотров 1,8 млн