Inside Holmes Hobbies Custom Pro Brushed Motors - Everything You Need To Know 

When will you start selling the screwdriver? 😜

The screwdriver is not long enough until you need 2 people for it

Gotta say this is great. It's like having hank hill start a channel on propane. This guy knows his stuff.

Great information John.. post a video of you guys timing a puller pro 400 or 500 motor to lowest amp draw. I've personally have learned a lot about 540 motor from the information you share thank you.

is that a Holmes hobbies branded screwdriver, i need one.

That screwdriver is truly worthy of John Holmes.... the other John Holmes. ROTFLMAO

Whats up John absolutely love your vids and sense of humor 👍🏻💯 i have a trx4 sport i just installed the HW 1080 esc I run 3s lipo 5000 mah whats the best motor for low end torqe and throttle control

Really nearding out to this!!!!

I love ur motors ! I have a 550 27t crawler. I changed my 35t out of my scx10 2 and right away noticed the extreme torque….. Thanks!!!

What motor would be good for light crawling and trail running for heavy trucks like trx4 and trx6 ? Thanks for your help.

Could you make a 80T motor, I have one in my grandhauler. I think watching this video one of yours would be very smooth at low speeds.

WOW!! Lots of information! Lets see ...... I'll take the five slot skewed with the standup silver brushes. My Bomber is getting really heavy, does that come in the 550 size? I love the fast bashing but I need to hang out with the crawlers at times. And sometimes I get a little wet ....

I sooo want to try your stuff I love brushed motors And when I can get my hands on one I know that it will only make me love them more. I am all about the slow crawl. thanks for this video.

At first i thought it said Homeless Hobbies. 😂

I have 2 of the custom pro 540 3 slot 35t I run on my moa crawler love them the best motors I ever had

Haha we need more fun with our hobby right...

Why isn't the skewed arm standard in the crawlmaster? It seems it has more positives than negatives.

Hell yeah. Eventually I'll be ordering motor.

Really enjoyed video. Didn’t know so much was involved. I definitely would love to learn more about motors and electronics. Thanks and look forward to seeing more like this.

I like your watch.

Can you make multiple wind motors that are brushed I mean 3-6 winds?

I love the attention to detail. 👌

Trouteye is on his way back from the LHS with a Crawl Master Pro and I was linking him your video over his new badass motor 🙌 we’ll be posting it up on Instagram 🥳👍

4 foot screwdriver comes with the motor..?? I will take two..!! Just kidding.!😂🤣😂 John, you're videos and Motors are top shelf.! Can't wait until I finally can get myself into one. When somebody pulls up with a Holmes Hobbies motor in their rig, you know you're dealing with a pro. Awesome video as always.!🏎😎

Yes , Yes and Yes I am 🤘🤘🤘😆😆🥳 As Usual John GREAT Vid 😎😎😎 I have a name for your screwdriver 😮 it shall be known as Excalibur 🤘😆😆 Damn you make some nice stuff brother🤩, I've said it before and I'll say it again , your puller pro 2200 is BUTTER😍😍😍🤘🤘🤘 I am Very Happy to let you know that the latest edition to my HH collection is a Minty Fresh Team Puller 500 Crawl 13T XX 🤤🤤🤤 quality is just SENSATIONAL 😍😍😍😍 , I have the pleasure of installing it today in one of my Comp Rigs 🤘🤘🤘🥳🥳🥳🥳🥳🥳I also have a Br-xl in the mail 😁😁😁😎😎😎 and now I am saving my penny's for a Br-mini 🤩🤩🤩🤩

John, as you may know by now (or not!), I've got your Brushed 30 turn Handwound Torquemaster Pro... Which I've LOVED for over 6 years!! 👍👍 Is this Motor in this Video's category?? Just want to know... You've watched a lot of late night Commercials in the 80's, didn't you? 😋 Anyway on my Torquemaster Pro, it been perfect for 8 Brush changes and one Comm turning.... But I think it's finally time for an upgrade. I'm STILL poor, could I get a 13t 5-Slot Skewed Armature, and put it in this 3-Slot Can?? Or do I have to replace the Endbell... Which then I might as well wait and try to get a whole new one. I want a very Torquey but Speedy Motor. This 30t was perfect. The old SCX10 One (Legacy?), between 43/13 Diff Gears on BOTH ends, and my Transmission Gearing.... I've got a FDR of 58.4:1 It keeps the Motor from working too hard, but I need something that can spool up for Wheelspeed. John, I STILL recommend Holmes Hobbies to anyone who will listen to me... as short as that list has become. Carmine ✈🚂🚙

Thanks for the info. You just sent me a Puller 500 11t, on the way still, but thought I would spend some more time looking for more info and comparisons to other motors, not just against your products. Not a lot out there in the wild? So would be interested in seeing the 500 pitted against some if you have old vids or links. And something for content.. maybe a vid showing your motors returned for warranty or rebuild and what the failures were and why, you know we like some carnage now and then, lol.

Umm, what’s the part number of that screw driver. I’ve got have one, but I don’t see it on your website😜

Great video...I’m not new to this hobby by any means but I’m new to understanding The electronics and how they work I really like how you brake everything down and explain it can’t wait for more videos ✌️

That was freaking hilarious! Nice small adjustment screwdriver! Just wanted to say this is a great idea so you can build the motor for the way you have built your truck and make special changes that you couldn't do off-the-shelf! Congrats on all the success of your company you have worked so hard and built a quality product for the financially challenged customer! We appreciate you helping out the little guys to keep up with the big money systems! And I do believe you are completely built in the USA if I'm not mistaken? 👊😎👍🇺🇸

Now to process all of this incredible information! Cant wait to get my first Holmes motor! I'm save'n bro. Soon I hope! Great vid!

Dude, you're killing me with that screwdriver! lmao I'm so bummed you couldn't make KNK.

In other words I can get any motor I want but if I ask you to drill balance I may end up getting pink HH stickers and a large tubular silicone packing supplies with said motor?! LOL

Cool bud now if I could get you to do a custom Brushed motor for my Losi MRC 1.9 comp crawler that would be the bee's knees 🐉😎

Thank you mr. Holmes. Always expanding knowledge in your videos.

I about died when you pulled out God's screwdriver lmfao!!!

I wish you had a giveaway for either a 15t or a 17t brushed motors.

Hey John how about a tribute to Pittman motor 7slot with cobalts . The Astro 05 is one of my faves 7 slot and cobalt with massive brushes .

Holmes you are the Bob Ross of RC. Good stuff. Thanks!

Always good info brother 🤙👍

Can you make a custom wind in a neo magnet?

Thanks for sharing this great info John! I need to get one of your custom builds soon!

Excellent info for us hobbies guys.

Hey John. Would you make a 550-can TorqueMaster Magnum in a high turn...like maybe in a 35 or 40-turn? I'd like ALOT more torque in my 8x8 Mammoth without going brushless. The stock motor is smooth...it's a 38-turn 560 motor. I wouldn't be opposed to a little more speed...but it's not needed. It's just a super heavy rig.

Great video John! Thanks for posting. I want to know what you would run for a class 2 comp truck on 3s. I like you love some power on tap but also want that low speed control. Can you do a dyno video comparing your brushed motors? Like the puller pro vs the magnum

Thanks for this video John. Got a question, Does hand wound winding do follow certain pattern on coiling each slot? Depending on number of turns and wire gauge to be used

I'm digging the shirt, nice dye! ... are there any for sale I gotta rock one!!

You use all FB magnets and neos but other people use c6 and stuff like that I get your magnets but what’s the c6 mean ps love the knowledge I get from your videos I actually can build my own motor using others parts

I had no idea what was involved in brushed motors ...great video..

🤯 love these videos!

I love your Motors John:)

I really hope you do a video going this far into detail on the Magnum and Puller Pro motors. Just more info in general without giving away your secrets. Amazing video thank you!