It’s time to do a van build review and inspect the functionality of my van conversion, mistakes and all, after over a year of days out, camping and adventure. In this van conversion follow-up, I go through the different elements of my van build and share what I would change about my van. I’ll also be removing my recycled plastic bottle insulation to see if it’s insulating correctly or whether it’s damp and covered in mould.
🔔 Please SUBSCRIBE to my channel, thanks! 🔔
🔥 Entire van conversion playlist: bit.ly/2ZewxLt
📸 Instagram: / yogi.the.van
🚐 Check out the written version on my website: thetinycampervan.com/2021/10/...
☕ Support the channel: www.buymeacoffee.com/LensOfJames 🙏🏻
🎶 Sign-up to Uppbeat through my affiliate link here: uppbeat.io/?as=lensofjames
Affiliate links:
👉 USB ceiling lights: amzn.to/3ZdYHz0
👉 NOVOO portable power generator/battery pack: amzn.to/3Zbsdpg
👉 Thermawrap bubble wrap insulation: amzn.to/408FYGB
👉 Van lining carpet: amzn.to/3ncNHEP
👉 Recycled plastic insulation: amzn.to/40vbqhM
👉 Rubber U-channel trim: amzn.to/3Zbr1Ci
0:00 - Intro
0:55 - Reviewing the van
4:35 - Checking the insulation
7:04 - What would I change?
---
Let's start with the carpet. I’m so pleased I carpeted the walls, instead of using heavy, space-consuming wood which would have been screwed into the van walls. The smoke grey finish hides marks, & the carpet itself actually acts as an insulator, reducing condensation. I stuck carpet over foil bubblewrap insulation in some problem areas - no problems in these areas either, & I’m pleased to say that the carpet still looks as good as the day I put it in.
I get asked about rubber trim around the doors a lot & whether it’s still stuck well. I did a lot of research into adhesives prior to doing the doors, & the rubber is still solid.
Onto the floor, & again no real problems. I have made a few marks & scratches on it, but other than that it just needs a good clean!
The bed has been brilliant, & for those who don’t know I made it in 3 sections so I could fit my surfboard through the centre of the van. I changed the draw from metal sliders & a peg in the leg to a couple of wooden rails with a stop. I also fitted a bolt to the far side of the bed, attaching it into a screw thread in the van. With the addition of the 2 turnbuckles, it’s solid.
Moving on, the curtain is still firmly in place, the headliner is still free from mould, & the storage box is working perfectly.
The table is so sturdy, & it’s large enough to eat lunch or dinner on. I added some jars to store some of the most essential items we need when out & about - coffee, snacks & charging cables! I keep a small gas stove, folding solar panel & carbon monoxide detector there. The battery has been brilliant & it’s great having access to the sockets without having to pull the table down.
I swapped out the AAA ceiling lights for some USB chargeable ones, meaning I can easily charge them from the battery if needed. Oh, & I also gave the ceiling some varnish to protect it from condensation. The fairy lights are probably one of the most used features when camping, transforming the van into a really cosy space.
I’ve previously removed one of my ceiling plywood panels to see how the foil insulation was doing, & I was pleased to see that it was keeping condensation away, but the soft loft insulation, which is made from recycled plastic bottles, is a different matter.
The first area I checked was the column by the back doors. Before insulating the van, I knew condensation gathered here so I was keen to check it out now. I’m really pleased to see that the insulation is still dry & clean, & so is the inside of the cavity.
I chose the next area because had left the foil insulation exposed behind the door card, which I now thought would be easier to cut through & patch back up.
After removing the door card, I sliced into the foil insulation & created enough space to pull some of the loft insulation behind it out. What a relief - the insulation looks as good as the day I put it in. Thinking about it, this insulation has now seen 2 damp winters so I’m pretty pleased about this. Inside the cavity it looked as good as when it was last sealed up. Using a bit of foil tape I could seal up the bubblewrap insulation, & then replace the door card.
It’s nice to know that things are doing ok on the inside of the walls of the van & that someone with no experience can undertake a van conversion.
🔔 Thanks for watching and if you’ve enjoyed this video, please LIKE and SUBSCRIBE! 🔔
#Vanlife #NissanNV200 #LensOfJames
DISCLAIMER: In this video, I am in no way stating that this is the proper way to undertake the conversion of a van, however after research and experience using the van, I believe this to be the way that is best suited to my van and the way I intend to use it.
22 июл 2024
