how to install home assistant for Server-16 beginner guide
1. make home assistant SD card for KinCony Server-16.
download www.raspberrypi.com/software/
2. enable i2c for home assistant.
Add files to enable I2C
In the root of the hassos-boot partition, add a new folder called CONFIG.
In the CONFIG folder, add another new folder called modules.
Inside the modules folder add a text file called rpi-i2c.conf with the following content:
i2c-dev
In the root of the hassos-boot partition, edit the file called config.txt add two lines to it:
dtparam=i2c_vc=on
dtparam=i2c_arm=on
3. install HACS addon (use by SSH)
hacs.xyz/docs/setup/download/
4. MCP23008/MCP23017 implementation for Home Assistant (HA)
github.com/jpcornil-git/HA-mc...
5. config ymal for MCP23017
install file edit add-on for HA , then config yaml
www.kincony.com/forum/showthr...
forum link: www.kincony.com/forum/showthr...
KinCony Server16 order link: shop.kincony.com/products/kin...
visit for more:
KinCony's website: www.kincony.com
KinCony's online store: shop.kincony.com
12 май 2024
