Install Instructions | Godzilla Raceworks 98-00 LS400 Cold Air Intake (UCF20) 

It looks like it would fit, we just have not tried it ourselves in house as we can't get anyone with an early year vehicle to borrow for development. If you're willing to try, you can order one from us and we'll get going on having one made for you.

This product and all e-commerce Lexus support has been discontinued by our company. See why here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6A9bijybLQU.htmlsi=TE8iDpNtyQ2Ya-iC&t=1881

This product and all e-commerce Lexus support has been discontinued by our company. See why here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6A9bijybLQU.htmlsi=TE8iDpNtyQ2Ya-iC&t=1881

Unfortunately we are not going to be offering them until further notice. Please see our VLOG post for more details ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6A9bijybLQU.htmlsi=TE8iDpNtyQ2Ya-iC&t=1881

You can try our 95-97 kit found on our website, but you will more than likely have to do some minor modifications to make it fit

@@GodzillaRaceworks thanks, what modifications doyou think would need to be done? the ones as done in this video? thanks for responding

This product and all e-commerce Lexus support has been discontinued by our company. See why here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6A9bijybLQU.htmlsi=TE8iDpNtyQ2Ya-iC&t=1881

Quite a few in our parking lot right now :)

What connector?

@@GodzillaRaceworks Not sure the name just know when I was removing my air intake on the back side of the silencer near the firewall that there was a connector plugged into it and was wondering was happens to it.

@@osnya2178 Unfortunately we have no implimentation for that sensor at this time. None of the development or service vehicles we have had here come equipped with it, so we have no way of accounting for it on our design

@@GodzillaRaceworks Turns out I wasn't paying enough attention when I was removing it and didn't realize that it was actually the closed canister valve connector still leaves me with the question of what happens to it when switching to this system?

@@osnya2178 Gotcha. Yes this is apparently only on the 2000 model LS400 if we're not mistaken. We've installed them on a 98 and 99 year model in house and neither of them had the CCV bolted to the intake. We may be able to make a minor implementation for it on the charge pipe, however we would need to have either a vehicle equipped with that CCV here at the shop, or if you'd be willing to send that valve along with your factory air intake pipe/muffler assembly, we'd be happy to reverse engineer it from there. If you'd like to discuss further, please either call the shop, or send us an e-mail at Godzillaraceworks@gmail.com

Honestly, we drive this car pretty hard haha, so we never really logged before and after for MPG

Air intake will always just add a few hp will need good headers and custom exhaust to see any real gains.

We actually found a potential development vehicle in our local area, we may be moving forward with it very soon

@@GodzillaRaceworks awesome. Roughly how long u think it would take ( couple months, couple weeks) ? To develop Just curious

@@ryanrivera2406 We could have it built out in a day, do some testing over the next few days and then release it to market. So I would say once we start, maybe 1-2 weeks barring no complications

@@GodzillaRaceworks can’t believe no one was willing to let u guys do it for a bit I’m excited

@@GodzillaRaceworks I’ve been checking for past couple months now

We have one :) www.godzillaraceworks.com/ls400engine/95-97ls400cai

@@GodzillaRaceworks wait I have a VVTi model tho, would there be any issues?

@@twotonejooee You'll just need to order the VVTi intake then.

why did you stop making them?? i want one@@GodzillaRaceworks

@@1uzpete See why here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6A9bijybLQU.htmlsi=TE8iDpNtyQ2Ya-iC&t=1881

They only fit the 98-00 VVTi models. If you have a VVTi engine in your 97, it would be a fairly close fit.

We should be releasing our 95-97 LS400 cold air intake toward the end of next week

Please contact us either via phone or e-mail

Thank you

You would be amazed, it is really hard to find someone willing to bring their UCF10 to us for development. We have offered several times to give the intake for free for allowing us to use the vehicle for development, but that isn't enough to get people interested for some reason.

@@GodzillaRaceworks want mine? lol

@@donderfoil Are you in the Dallas/Fort Worth area?

We should be releasing our 95-97 LS400 cold air intake toward the end of next week

​@GodzillaRaceworks not sure if y'all are still trying to develop anything for the first gens or are interested, but I'm local and have a 91 I'd be willing to let you look at

Yes, we are actually on the trailing end of proto-typing the 95-97 LS400 cold air intakes. We hope to release the kit to market sometime next week, as well as have a couple of videos covering the topic.

@@GodzillaRaceworks I see you guys released it thank you for keeping me in the loop I appreciate it

Yea go for it! We'd be happy to get you setup with one

@@GodzillaRaceworks yeah ima def need one, does it come with the extra long hoses or do i have to acquire those myself?

@@enrque It will come with the longer hoses that you need.