Check your mixer gain, stabilize mode channels. With the new firmware update, and LUA scripts, GAIN (moved from CH9 to CH13) and STAB Modes from CH10 to CH14.
The LUA scripts are not showing up on the touch screen. I have no means to execute the script. The file manager does not allow me to run the script...only move or delete the file. My zip file had three folders, and three scripts...hope this is right. X20: fully up to date. RX: SR8 Plus v1.05 (cannot find 1.08). What am I missing.
For SR8 Plus, latest firmware is 1.0.5 (not 1.0.8, 1.08 is for SR10+ in my example). Yes the latest 2.0.5 LUA ETHOS script has 3 folders: SRX_Base, SRX_Cali, SRX_Stab, and you should copy these 3 folders onto your X20S SD card. It should be place J:/scripts/ folder and J just happen to be my SD card drive, yours could be different. Maybe your SD card memory is not big enough. It is a straightforward copy. Please verify on your PC first, and check PC Window Explorer after you put your X20 to bootloader mode and plug in USB connector to the PC, and check if your SD card is mounted such as J: drive (in my case it's J, your could be different letter) to see if you have J:/scripts/SRX_Base, and J:/scripts/SRX_Cali, J:/scripts/SRX_Stab. If you don't see the script folder on your SD card drive after copying it over (at 8:32 in video), then you won't be able to see it in the X20 touch screen later on.
Hello Sir! hope you are having a super day. I just installed Sr10Plus receiver and I'm not having good time with it. This how I've got mix page setup. AETR-A2-E2-F1-F2 and 13 is for gain and 14 for mode. When I activate the self leveling mode the flap 8 reacts with the elevator and flap 7 reacts with aileron. I've try couple different thing but didn't change anything, any help would be awesome.
I did not need to setup flap for my plane. But looking at your setup F1, and F2 is assigned to CH7 CH8. In the 2nd page of LUA SRX Stab, you should either turn stablizer (on 2nd page) off bc you don't need F1 F2 for stabilizing, or set CH7 and CH8 to AUX3 AUX4. Also, the proper way to configure these SR receiver is you should have set stabilizer first so that the stabilization is acting correctly in direction, then set direction in the radio so the radio mixer/stick direction is correct.
@@8HrToGo Thank you for your quick response. I'm lost on this receiver, its completely different from sr10 pro. So i should calibrate stabilizer first then go into outputs and get surfaces going the right direction and ch7 nd ch8 are on the 2nd page of the lua script. So sorry but I want to get this right and your help much appreciated.
ok i went back out and setup my receiver. I change back 5 to ail and 6 back elv and put my flaps on ch 7 and ch8. ch10 set aux3 and ch11 to aux4. Everything works great except flaps, The flaps works with the ails and elv, except when I have full flaps on. Really having tough time getting this wrapped around this old brain--LOL
@@8HrToGo THANK YOU---THANK YOU. I guess I miss ready the instruction saying SRX 1 and 2 has to be on to work right. When I cut the SRX 2 off everything fell in place. your help its very much APPREICATED. You have super day and weekend.
Hello Sir and hope all is well for you. Question i have ISRM 2.2.1 on my radio now. I'm wanting to update to 2.2.4 but i notice they have a version 2.2.2 too. When i update to 2.2.4 will this take of 2.2.2? Thanks for your help.