Install Smart Recessed Lighting || Lumary Smart RBGAI with Auxiliary Night Light

Подписаться 9 тыс.

Просмотров 7 тыс.

50% 1

This video I show you how to install recessed lights. These lights are the new Lumary smart RGBAI recessed light with gradient auxiliary night light. These are considered remodel recessed lights and do not require a can to be installed.
Basic electrical knowledge is required to install these. It is super easy. Anyone can do it.
Be sure to subscribe to the channel if you haven’t already.
You can purchase your lights through Lumary’s site here: lumarysmart.com/?ref=81ZzlFog...
You can purchase your Lumary RBGAI nightlights through Amazon by clicking on these links:
-6” lights: amzn.to/3EeSzyO
-4” lights: amzn.to/3KcnaRq
Check out my other video on the Smart Recessed Lights by Lumary here: • Lumary Smart Recessed ...
You can check out some of the tools and other products I used in these Amazon links:
Voltage Tester: amzn.to/3xsIzy9
6” Hole Saw: amzn.to/3XzBKWq
14/2 Romex Wire: amzn.to/3xq7cMb
Drill/Driver Set: amzn.to/3jVeLHC
Thanks for watching- be sure to subscribe if you haven’t already.
#diy #home #diyhome #homediy #lighting #recessedlighting #lights #smarthome #smartlighting #smartgadgets #smartitems #smarthouse #smart #electrical #doityourself
#homerenovation
As an Amazon Associate I earn from qualifying purchases

Хобби

Опубликовано:

15 фев 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@lengfeng8220 Год назад

Nice Lumary Smart RGBAI Recessed Lighting！

@HomegrownHowTo Год назад

They are awesome! 👍

@ryanbeckstead Год назад

Those lights are nice! I need to grab some for the girls. Nice vid and instructions.

@HomegrownHowTo Год назад

You should!

@DanTheLawnMan Год назад

Some awesome lights I really like the effects mode. Any idea if you can make them go with a movie you are watching?

@HomegrownHowTo Год назад

There is a section within the app that allows you to pick up noise on the device, you can sync these with a movie, music, video game etc.

@nova_746 5 месяцев назад

My Lumary recessed lights don't have a ground wire or cone with a metal box. Where do I connect the ground? Thank you.

@GarenteedTires Год назад

I have a black ceiling in my mancave. Is there a way to paint the outer ring of the lights black?

@HomegrownHowTo 11 месяцев назад

That sounds awesome! But no I don’t think so.

@meetthemartins1094 2 месяца назад

Great video! How did you set up for the night lights to come on without the main light turning on?

@HomegrownHowTo 2 месяца назад

You can switch it through the app. Both lights are not supposed to be on at the same time. If you enable Alexa/Google with a command you can voice control the switch. Thanks for watching

@meetthemartins1094 2 месяца назад

@HomegrownHowTo thanks for the response! I have Google but can't seem to get the night light to turn on without having to go to the app. Did you have to do something special with Alexa?

@HomegrownHowTo 2 месяца назад

@@meetthemartins1094 yes I had to program the commands on the Alexa app. I can’t recall the what the default commands were but I changed it so when I say “Alexa turn on nightlights” it kicked them on. I don’t have google so I can’t help there. Sorry. 😞 I know the instructions that come with the lights aren’t the best either as the language barrier is definitely there.

@ajgarcia3159 Год назад

So I ordered 2 of these lights for my garage and only 1 can connect. “Very frustrating”. So I ordered another one and just switched out the light and STILL won’t connect. I even tried “AP Mode”… Any suggestions or ideas? Did you have the same problems??

@HomegrownHowTo Год назад

I did not have this problem. But it does sound frustrating. I had one light start to flicker after about two weeks of install. I reached out to Lumary and they sent a new light right away. I tried just switching out the light and it still flickered. I then replaced the junction box and it worked great, with both lights. There was some sort of issue with the original junction box. So you can try replacing the junction box as well but to me it sounds more like an issue with the wifi connection likely coming from the light source. I recommend reaching out to Lumary and let them know your issue.

@sanjeefonseka103 4 месяца назад

Same here with my foir lights. Im so frustrated having to pay so much for these lights not connecting

@bradburkholz8704 Год назад

In new construction do you have to wire these to a physical light switch or can they just be controlled from the remote and app?

@HomegrownHowTo Год назад

Great question. I would assume you’ll need a light switch to meet building codes. But I’m not entirely sure. They do work well with a traditional switch as well.