Installing a Nuna RAVA Convertible Forward-Facing in a Tesla Model X

Подписаться 2,3 тыс.

Просмотров 21 тыс.

50% 1

I show all the steps necessary to install a Nuna RAVA convertible carseat forward-facing in a Tesla Model X. These installation techniques can be used to install the RAVA in any vehicle.
Thank you so much for watching! Please like my video and subscribe to my channel. I am working hard on more videos!
Nuna Rava: fave.co/3lnKT6K
0:00 Intro
0:15 Remove tether from tether storage in preparation for use
0:50 Discuss recline settings
2:25 Show calf support feature and how to open/store it
4:10 Demonstrate how to loosen harness and introduce buckle tongue storage
5:15 Introduce the True Tension Doors as features for easy installation and why we use the seat belt for installation
6:20 Demonstrate how to open the forward-facing True Tension Door and thread seat belt through
6:52 How to lock the seat belt and close the True Tension Door
7:38 Demonstrate how to check for tightness
8:10 How to attach the top tether
9:20 Discuss the Side Impact Pod and how to open/close it
DISCLAIMER: Some links may be affiliate links. If you make a purchase, I may receive a small commission at no charge to you. Thank you so much for supporting CarSeatSite!

Опубликовано:

17 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@meganlenz5110 Год назад

Thank you so much for this! I’ve watched like four other videos and this one is the most thoroughly helpful at explaining every inch of the car seat. I feel confident enough to install this seat correctly.

@CarSeatSite Год назад

I’m so glad you found the video helpful! Boosting your confidence so you can install your carseat safely yourself is why I make the videos. 😊

@tweetpiyo9338 2 года назад

Thank you! I installed the car seat in less than 5minutes after watching your video.

@CarSeatSite 2 года назад

Thanks! I'm so glad the video helped you!

@DaisyAndDora 2 года назад

Thank you! We just started forward facing, and this video helped correct what we were doing wrong. ❤️

@CarSeatSite 2 года назад

Thank you! I'm glad it helped you! Please subscribe if you haven't yet-I'd appreciate it 😊.

@YeshuaLove0722 2 месяца назад

PLEASE DO THIS IN A 3rd ROW

@alexxussss9359 2 года назад

Very helpful- thank you so much!

@CarSeatSite 2 года назад

Thank you! Glad it helped you out!

@Bontty888 3 года назад

Thank you!

@Uriakus 2 года назад

Thanks a lot.

@tonyscybercenter1781 Год назад

Thank you

@DaisyAndDora 2 года назад

I also love love love the timestamp!❤️

@erniawaticraig1403 2 года назад

Thank you :)

@DiDi-qf8wm 2 месяца назад

The top tether strap slides down and if tightened causes the car seat to tilt toward that direction. Do you have any tips?

@CarSeatSite 2 месяца назад

Hi. Are you installing it in a Model X? What I do is pull it as high as I can on the shoulder of the vehicle seat and pull it as snug as I can. It seems to stay like that, but I’ve only had carseats installed for several days at a time since my kids are older now. You could try loosening the tether a smidge to see if overtightening it is causing it to slide down.

@valerie8607 2 года назад

Hello! Can you please tell me how to remove the rebound bar? Thanks!

@CarSeatSite 2 года назад

Hi Valerie. Are you talking about the legrest on the Rava? If so, you pull down on it slightly and push it in. It's a different kind of a motion, but not hard to do once you get it.

@valerie8607 2 года назад

@@CarSeatSite Thanks for responding! No it's a rebound bar that attaches to the seat... I think it's only on the Canadian model as the bar is required here but not in the US.

@CarSeatSite 2 года назад

Valerie, unclip the snap on each side and pull on each side to get the ARB off. Here's a manual with the instructions in it: nunababy.ca/common/sitemedia/IMG-0064F_RAVA_CA%20(LR)-19431363-1.pdf .

@raditodwihartadi6595 Год назад

Can I use tether on rear facing mode ? Is it safer to do so ?

@CarSeatSite Год назад

Good question! No, the tether cannot be used when rear-facing. Nuna either hasn’t tested it that way or they have and it failed, so just attach it to the storage area and wait until forward-facing to use it.