Installing An Oil Accumulator In My 2022 GR86

Подписаться 19 тыс.

Просмотров 2,7 тыс.

50% 1

This video covers the complete installation process for an oil accumulator on your 2022+ Toyota GR86 or Subaru BRZ. I am using a Moroso 1.5qt HD accumulator with a Canton electronic on/off valve. You could also substitute a Canton Accusump in place of the Moroso accumulator, if so desired (although, it is a big larger at 2qts). The goal with this oil accumulator is to further mitigate, or eliminate, the low oil pressure drops observed in right hand turns on our generation 2 GR86 and BRZ.
Products used in this video:
► Moroso 23903 1-1/2qt HD Accumulator : amzn.to/49nYIWz
► Canton Electric Valve (no PSI switch) : amzn.to/494N0At
► Oil pressure sensor adapter (for OEM location) : amzn.to/493tDb8
► Rubber strap wrench : amzn.to/3OCwtvp
► Ansix Auto install kit (hose, fittings, mounts) : ansixauto.com/2022-brz-gr86-a...
► GR86 / BRZ Maintenance Items : amzn.to/3S5usL0
► GR86 / BRZ Track Essentials : amzn.to/3txtkWo
► Car Care & Detailing : amzn.to/48pK016
BTR Garage Friends:
Motion Control Suspension : motioncontrolsuspension.com/
Zebulon MSC : www.zebulonmsc.com/
Subscribe today, it's FREE! Cars, trucks, racing, and more.
► Follow me!
Instagram: thebtrjustin
Website: btrgarage.com
Facebook: / thebtrgarage
00:00 Introduction
00:26 Background testing
00:53 Parts and supplies
03:07 Prepping accumulator
04:52 Mounting accumulator
07:38 Install ground wire for electronic valve
08:25 Testing electronic valve
10:16 Wiring electronic valve to on/off switch
13:35 Mount on/off switch in cabin
14:00 Install oil fittings and oil line
16:49 Re-locating oil pressure sensor
18:40 Preparing oil accumulator for use
19:56 Add additional engine oil
20:35 Preparing for first start
21:10 First start, check for leaks, accumulator pressure
22:15 Important oil fill level note
22:48 Closing
BTR Garage is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Авто/Мото

Опубликовано:

16 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@TheBTRGarage 5 месяцев назад

*Are you looking forward to the results of the accumulator testing?* My other GR86 oil pressure testing videos here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HEAPaPmb2m4.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-epuQNOGVkR0.html

@grippgoat 5 месяцев назад

My understanding is that a 1.5qt accumulator doesn't hold 1.5qt of oil, because the air (and maybe the piston) take up some of the volume. Moroso has a good video that explains how the accumulator works.

@LuisL1999 5 месяцев назад

Thank you for putting this together! I’m sure we’re all looking forward to the results and finally having a fix for the starvation issue. Keep up the great work!

@TheBTRGarage 5 месяцев назад

Thanks for the support!

@GP-fc7jv Месяц назад

I think that it’s would be interesting to get all the brands for sway bars and do a comparison of them to see how different and rank them

@jamesinoregon1081 5 месяцев назад

As always, well done Justin. I look forward to the track testing.

@AnsixAuto 5 месяцев назад

Fantastic installation video! Really appreciate the detailed walkthrough, will be super helpful for a lot of folks!

@TheBTRGarage 5 месяцев назад

Thanks, and also thanks for making a great install/mount kit! Saves so much time on the process 👍🏻

@atpgarageatl 5 месяцев назад

Great install/walkthrough video. Looking forward to the results. Engine bay is looking great too!

@TheBTRGarage 5 месяцев назад

Thanks!

@Blight-fp3vt 5 месяцев назад

Nice Justin!

@lojts 5 месяцев назад

Thank you!

@TheBTRGarage 5 месяцев назад

You're welcome!

@blairo15 Месяц назад

Great product. I use the ball valve. I don't see any benefit to the pressure switch either. The system works way better when it's seeing engine oil pressure the entire time. It can then respond to small changes of oil pressure. The oil pressure is way more even like that.

@x450riderx 5 месяцев назад

Thanks!

@TheBTRGarage 5 месяцев назад

Thanks for the support!

@michaelluttmer2486 5 месяцев назад

I've seen a similar setup on other GR86's in our region, its working very well for them! Would love to see more data on it, as I'm curious!

@TheBTRGarage 5 месяцев назад

Awesome! I've talked with a few of the NorCal 86 Cup guys who are running them and heard the same.

@dowroa 5 месяцев назад

Thanks for the information you have been supplying for the community!

@TheBTRGarage 5 месяцев назад

Thanks buddy!

@artblackwood7936 5 месяцев назад

Excellent presentation. You should consider putting some dirt on that garage floor. 😄

@TheBTRGarage 5 месяцев назад

😆 Ya'll don't vacuum your garage floor? Just me? Ok... 😁

@x450riderx 5 месяцев назад

Justin, great video, thank you so much for putting this together! During the video, you added some captioning that stated you had better results without the pressure relief valve. Can you elaborate on that a bit? Also, you said that you don't need to turn on the solenoid when filling the accumulator for the first time. is that because you have the pressure relief valve? Thanks!

@TheBTRGarage 5 месяцев назад

Yea, the pressure sensor switch is not needed. What it does is it holds oil in the accumulator *until* pressure drops below 40psi. By that time the oil pressure is already dropping rapidly into the low 30's and makes the accumulator less effective. Without the pressure sensing switch, the accumulator is reacting to *any* loss in oil pressure and putting oil back into the engine, not just when it goes below 40psi. When you have an electronic solenoid (ie: on/off valve, not to be confused with the pressure sensor switch) it does not need to be "open" in order for oil to go *into* the accumulator. But, it needs to be open for it to go out and back into the engine. So on the first startup, all that needs to happen is oil gets into the accumulator, so no need for it to be open.

@x450riderx 5 месяцев назад

Thanks!@@TheBTRGarage

@sikrip 5 месяцев назад

Since overfill comes with its own negatives, a good test would be to know if the pressure drops are eliminated or at least mostly mitigated with the accumulator with no overfill.

@TheBTRGarage 5 месяцев назад

That's a good idea, I may test that out at the next track day.

@sikrip 5 месяцев назад

Nice job. Waiting for the results! Would starting the car without the extra 1.5q let it idle for a while and then add the extra oil(while checking the dipstick) be an option? This would prevent the engine running with ~2q extra oil for some short time.

@TheBTRGarage 5 месяцев назад

Yea that is definitely an option, but it doesn't hurt to run it for a few moments with the extra oil. The accumulator tank fills up pretty quick.

@Matt45_252 2 дня назад

What do you do if don’t use the pressure sensor?

@1atinlove 4 месяца назад

Is there any maintenance needed on this unit? Once installed what should we look out for to avoid a push of excess oil into engine?

@TheBTRGarage 4 месяца назад

About the only thing I have noticed is you have to relieve the accumulator tank pressure every few drives by opening the valve without the engine on. I've seen the tank pressure slowly creep up to ~130psi when it should be around ~100psi from cold starts. So, all I do is put the car to ignition on (so the electric valve has power) and then open the valve for 30 seconds before starting the car. Then I turn the valve back off. That helps pre-oil the engine as well, but also get the tank pressure back down after creeping up without use.

@1atinlove 4 месяца назад

@TheBTRGarage I've always liked your channel thanks for the information. Have you had any issue with to much oil in the system? And it causing complications?

@TheBTRGarage 4 месяца назад

@1atinlove the only issue with too much oil is you might get some smoke from the exhaust after startup, briefly. I only saw this when testing a full 1qt overfill (prior to accumulator).

@Mr_DiEnd 4 месяца назад

i'm more interested in the phone mount that you have. can you please advise what mount that is?

@TheBTRGarage 4 месяца назад

It's this 3D printed mount but with a custom backing plate: ► 3d printed phone mount : etsy.me/3hQOZTG The backing plate mount (instead of a magsafe mount) is made to fit phone mounts with 30mm X 38mm squared holes. You can ask him to custom print a mount like that or just use the magsafe default if that's what you use.

@Mr_DiEnd 4 месяца назад

@@TheBTRGarage yeah i have that 3 printed mount but wanted to customize it to fit a regular phone holder plate cause magnetics fall off in rougher driving and i saw your mount/plate it was perfect! so i was wondering. did you make that plate yourself?

@TheBTRGarage 4 месяца назад

No, the guy printed it for me when I bought his mount. I just told him what base I wanted (iBolt 30x38mm hole base) and he printed a couple for me that fit that. If you msg me on Instagram (thebtrjustin) can probably send you photos, I've sent to other people before.

@cayman9815 5 месяцев назад

Q: what motor oil you use ?

@TheBTRGarage 5 месяцев назад

Mobil 1 5W-40 currently, see this page for all the fluids I use. amzn.to/3S5usL0

@BRZ_RN Месяц назад

does the AN fitting need to be at the galley port? my turbo oil line is coming from there. should i move my turbo oil line from the cam gear area and get a verus cam plate?

@TheBTRGarage Месяц назад

Hmm, that might be tricky. If there is another oil feed option for the turbo, I would move the turbo there. Keep the accumulator on the oil galley port.

@BRZ_RN Месяц назад

@@TheBTRGarage awesome. great to see you back in the brz platform. enjoyed your contents even back in the 1st gen.

@TheBTRGarage Месяц назад

Good to be back in an 86! Thanks for watching 👍🏻

@timeattack_lyle 5 месяцев назад

What is the pressure relief valve discharge pressure?

@TheBTRGarage 5 месяцев назад

There is no pressure relief valve on the Moroso accumulator, unlike the Accusumps. Unless I am misunderstanding what you mean.

@timeattack_lyle 5 месяцев назад

@@TheBTRGarage interesting, thanks for the info

@RyanPine 4 месяца назад

You never actually mentioned what the adapter fitting for the oil pressure gauge was , what the size is, what fittings it adapts, seems like you actually edited that part out and then later in the video mention that you spoke on what it is earlier in the video …. BUT NEVER DO. Why ? I actually went back to see what part I need and ….. you just skip it. Wanna let the people know ?

@TheBTRGarage 4 месяца назад

The pressure gauge on the tank? That comes pre-installed by default, you don't need to do, or get anything.

@RyanPine 4 месяца назад

@@TheBTRGarage no. For the oil pressure gauge to move to the location of the stock oil pressure sensor, whatever that adapter fitting is …. I think it’s ntp to something else. Where do you buy that adapter.

@TheBTRGarage 4 месяца назад

That one is 1/8bspt to 1/8npt. BSPT is the thread on the block/OEM oil pressure switch. I thought I said that in the video? Maybe I did edit it out for some reason...anyways, it is this: amzn.to/3P8Gukt I didn't want to get too deep on the oil pressure sensor setup because it is a bit more complicated and lots of parts are needed.

@RyanPine 4 месяца назад

@@TheBTRGaragethank you very much, I appreciate you. Keep up the kick ass work.