Installing Heating pad under a lifepo4 battery for cold temperatures - SEPLOS MASON 280 DIY kits

Подписаться 14 тыс.

Просмотров 12 тыс.

50% 1

Batteries can be charged and discharged over a large temperature range, but the charge temperature is limited. When temps fall below freezing, the electrical performance of lithium-ion batteries declines, and when conditions are cold(below -20℃) enough, they can fail to transfer any charge. So it is important to fit your LiFePO4 battery with heating pads.
Seplos added PUSUNG-280 with heating pads, which will automatically heat up when the temperature gets below 0 ℃. In this video, we tested the heat-up performance under the temperature of -20℃. The heat-up current is around 3A. And the 4℃ of temperature raising within an hour. It's very useful when using a lithium-ion battery in cold winter.
Need heating pads, please contact SEPLOS sales at: info@seplos.com
Please visit Seplos new website for more updates, www.seplos.tech/
----------------------------------------------------------------------------------------------------
Get connected with us
Official website: www.seplos.com/
Official website2: www.seplos.tech/
Facebook page: / seplostechnology
Instagram: / seplos_technology
Pinterest: / seplos_technology
Telegram: t.me/joinchat/SisDwbzfPLw2NDVl
WA Business: wa.me/message/AQKQF2AGRDHIK1
----------------------------------------------------------------------------------------------------

Хобби

Опубликовано:

2 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@Roll2Videos Год назад

Very nice! I've been looking for a golf cart battery with heating 👍 keep up the great work.

@Stefan_Dahn Год назад

Nice and clean system. 👍👍 Please DO NOT wear rings on fingers nor use non-isolated tools for your personal and battery safety.

@_JustBeingCasual Год назад

Yeah, that's a good tip because once you make a short, you might be welding the ring to the short surface, and you might be having some fun with a ring that will become hotter and hotter. Even if it's a nice ring that's normally easy to take of might get deformed and causes it to be stuck on your finger. Stay safe ~

@derfreiemensch Год назад

@@_JustBeingCasual I buy cheap the pack with the finger than

@derfreiemensch Год назад

That is great, i lock for that 2 weeks ago and there where nothing, i ordered now heatcable for no frost waterlines. Will see how it works. Great work Seplos, next winter i will buy if not to expensive. 1+

@WiSeNhEiMeR-1369 6 месяцев назад

Thanks COOP ...

@Sanwizard1 Год назад

Nice touch

@houseofancients Год назад

it is isnt it ? got yours up and running yet ?

@robertotrinanes1744 Год назад

Wow with temperature monitoring sensor

@SeplosTechnology Год назад

Temperature monitoring sensor only for testing.

@Jack-ng1yq Год назад

😊😊😊

@writm1821 Год назад

Il faudrait 6 plaques chauffantes pour chauffer uniformément les cellules. 2 au fond et 4 sur les côtés. Mais je vais commencer avec 2 au fond pour essayer. 👍

@pau1phi11ips 10 месяцев назад

I've got tiny heating pads on mine and it still works well enough to keep the above 5 degrees in the winter. These should be fine, they conduct the heat pretty well.

@KoRWraith Год назад

Can this be installed to existing Seplos BMS or is it only for new BMS?

@SeplosTechnology Год назад

Need add heating module.

@gavinnoname1424 Год назад

@Seplos Technology is that a seperate module or requires a special version of the BMS?

@_JustBeingCasual Год назад

You are placing the battery on the probes, wouldn't this cause the height to be slightly different, which might give issues with the terminals?

@pau1phi11ips 10 месяцев назад

The probes aren't big enough to affect this.

@patricklyons7683 Год назад

Or buy some cheap electric blankets that run off inverter or mains.

@jacopo.scarpellini 8 месяцев назад

Don’t buy the heating pads from Seplos; I bought them but the BMS heating logic is awful. Here’s how it works: when the inverter wants to charge the battery and the temperature is below a certain threshold, the bms turns on the heating but also the charging mosfet (although at a reduced charging current). You are not supposed to heat and charge LiFePO4 batteries below 0°C (even with a small current); you need to heat the batteries first and then start the charge. Unless Seplos fix this in their firmware, don’t buy this.