Installing sound deadener and rust preventer before carpet - 1966 Mustang

Подписаться 11 тыс.

Просмотров 20 тыс.

50% 1

Check out Alf's Mustang Parts on Amazon www.amazon.com/shops/mustangalf
Things I used in this video. As an Amazon Associate I earn from qualifying purchases
Basic mechanics tool set amzn.to/3ob7q2B
Noico Black 80 Mil 36 Sq Ft Car Sound Deadening amzn.to/2RSlzre
POR-15 45404 Rust Preventive Coating amzn.to/3pSrWaE
Sound Deadening Roller Metal Installation Tool amzn.to/3iL05aP
Kleanstrip Prep-All Wax & Grease Remover amzn.to/3pPL2yc
Handy Spray 0.75 Qt Pump Dispenser amzn.to/35yDOW9
GoPro Camera & accessories amzn.to/2NwysVu
Lighting set up amzn.to/3ph54R2
As an Amazon Associate I earn from qualifying purchases
Subscribe to the channel and click on the notification bell. / @alfsmustanggarage
We want your thoughts and comments. What kind of project are you working on? What Mustang are you daily driving?
Alf's Mustang Garage is not responsible for any mechanical or technical error that you may encounter when working on your own car. You are responsible for your own quality control and your own proper repairs.
Today at Alf's Mustang Garage, we are prepping the floor before we install carpet. We apply two coats of POR-15 rust preventive and also install Noico sound deadener to make way for new carpet.

Авто/Мото

Опубликовано:

17 июн 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@FiscalRangersFlorida Год назад

I happen to be preparing to replace the carpet in my 52-year-owned 1965 Mustang convertible. Great video.

@AlfsMustangGarage Год назад

Oh awesome! Glad I could help.

@67Stang Год назад

Looks good. I did basically this same thing when I repaired the floors in my 67 Mustang.

@AlfsMustangGarage Год назад

Awesome! Ya I figure the goal is to make sure they hold up better the second 50 years vs the first 50 years.

@67Stang Год назад

@@AlfsMustangGarage Very true. Got mine to the point it is a reliable and safe driver. Took 4 years of mostly weekend work but I got her there and she should easily last another 50 years.

@AlfsMustangGarage Год назад

Awesome! And ya now that we typically take care of these better, store them for the winter, and only take them out when it's nice out, they should hold up way better.

@eddievantailn2882 Год назад

When I replaced my floor pans I did the same thing. Applied POR15 after a good cleaning. I expect that everything will be good long into the future. Also applied POR15 to the inside of both doors.

@AlfsMustangGarage Год назад

Oh ya, the inside of the doors is a good idea.

@StankyPete9 Год назад

Best video I've found on this! Thanks Alf!

@AlfsMustangGarage Год назад

Thank you very much!

@halvorsonke 3 года назад

Love it dude. Got a ‘66 Convertible and am working through your videos. Liking and subscribed…keep it up!

@AlfsMustangGarage 3 года назад

Awesome! Thank you very much!

@beeepizzle Год назад

@13:42…Duuuude!!! You have a urinal IN your garage! That rocks!!! My bucket list now won’t be complete without an upgrade like that. 💪😂👍

@AlfsMustangGarage Год назад

Ha ha! You noticed!

@williamguillIII Месяц назад

@@AlfsMustangGarage I did too, I was waiting for someone else to comment first, LOL.

@DC-zu2jh 2 года назад

Love it, thank you for this

@AlfsMustangGarage 2 года назад

You're very welcome

@sirbaldsalot 5 месяцев назад

great video

@AlfsMustangGarage 5 месяцев назад

Thank you

@peterpratt9144 3 года назад

Your videos are great and really informative.Can you make a video post on changing shifter bushing on automatic transmission.

@AlfsMustangGarage 3 года назад

Thank you! I will definitely plan on doing that. My carpet replacement video actually shows me taking the automatic shifter out and you can get a pretty good look at that in that video.

@MrRatfink56 4 месяца назад

Was one quart of the POR-15 enough to do the floor? Thanks Alf.

@AlfsMustangGarage 4 месяца назад

Yes, more than enough!

@dangerman1969 14 дней назад

New carpet is my next project for my '69 convertible. Would you recommend the sound deadener & massback on the carpet kit also? Or would it be too thick & not form good? I have dual 40 series flowmasters so I would like to make the cabin a little quieter

@AlfsMustangGarage 12 дней назад

Yes! We typically do that for all cars that get new carpet.

@Wild_Bill7407 3 года назад

Looks awesome! When you apply the por15 rust paint, do you not have to apply the por 15 top coat on top? Thanks Dan

@AlfsMustangGarage 3 года назад

You know, I typically don't when I'm doing the inside of the floor. Just because its not really exposed to extreme elements. If you were doing the bottom side of the floor where its going to be exposed to the outside elements, then yes absolutely use the top coat. It wouldn't hurt though just to add that extra layer of protection.

@ChanningRay 2 года назад

Thanks for the great tutorials. Working on a 65' convertible at the moment. How many sq ft. of the sound deadening material do you need to replicate your job?

@AlfsMustangGarage 2 года назад

I had to buy 2 boxes of the 36 Sq ft. I didn't use all of the second box though.

@aps81sarge Год назад

Nice video. Does this cut down on the heat as well? Trying to decide if I should use this or temp pad?

@AlfsMustangGarage Год назад

Oh I would imagine it does. Provides a nice barrier.

@fairyboy444 3 года назад

hi, im 21 and want to this with my 65 mustang. I was wondering if this helped a lot? also, do you think it is possible to do the door panels?

@AlfsMustangGarage 3 года назад

Yes it definitely helps a lot. You could put it on anything really that will get covered. Some people will put this under the headliner on the roof.

@rockyrodiguez5011 2 года назад

Hey bro where did you get the paint & underlayment?

@AlfsMustangGarage 2 года назад

I just get that stuff from Amazon. Here are the links. Noico Black 80 Mil 36 Sq Ft Car Sound Deadening amzn.to/2RSlzre POR-15 45404 Rust Preventive Coating amzn.to/3pSrWaE

@abigasswave3000 3 года назад

Hey man I was wondering if I could ask you for some serious advice about my current project, I own a 1967 mustang with the 200ci straight and converting to v8 is just out of my budget sadly and I just want her on the road. I'm going to send the engine and transmission to be rebuilt as they are the original and never rebuilt so I was wondering for ways to get more performance from the straight 6 and forms and parts are hard to find and I was wondering for any recommendations for ways to boost it's power for when it's rebuilt a recommended camshaft or head or anything In particular just looking for another prospective before I start investing sorry for obscenely long paragraph thank you

@AlfsMustangGarage 3 года назад

I've have never been hired or never worked on inline 6 for performance. I probably wouldn't be the best person to ask for specifics. However, I would probably check ford ford6.com and see what they have. Lots of resources and lots of information.

@abigasswave3000 3 года назад

@@AlfsMustangGarage okay thank you for taking the time to respond any info helps your channel is a great help and I'm thankful you take the time to do it it's my first time ever working on cars and It helps novices for sure

@AlfsMustangGarage 3 года назад

Oh awesome! Happy to help. I try to respond to all relevant comments so don't be afraid to ask. If you need parts for your car, I'm a dealer for ACP so I can get a lot of stuff 👍

@abigasswave3000 3 года назад

@@AlfsMustangGarage awesome! I might have to buy from you In the near future thank you for interacting!

@AlfsMustangGarage 3 года назад

Absolutely! Google my shop for the phone number and let me know of you need anything.

@vawarealty Год назад

hi can you apply POR 15 on the side panels (inside side)...the column, etc.... or strictly for the bottom panel only? maybe the question is, is it safe to apply the POR 15 on other area inside the car not only the bottom panel.

@AlfsMustangGarage Год назад

You can put it anywhere that is direct to metal that you don't want to rust. It should not be used on panels you intend to paint or body work over.

@hughphillips67Mustang Год назад

Ever try frost king duct insulation in place of the sound deadner?

@AlfsMustangGarage Год назад

I have not

@hughphillips67Mustang Год назад

@@AlfsMustangGarage don't you get tires of me bothering you? Lol. I'm just giving fresh ideas for people looking for a budget and can't always afford the name brand stuff. I think outside the box.

@hughphillips67Mustang Год назад

Tired*

@AlfsMustangGarage Год назад

You're good. I try to respond to anyone who is respectful.

@hughphillips67Mustang Год назад

@@AlfsMustangGarage much respect my friend.