Installing the timing chain on a k24 engine

Подписаться 69 тыс.

Просмотров 102 тыс.

50% 1

crank part 1 - • K24 crank install (par...
crank part 2 - • K24 crank install (pa...
pistons part 1 - • K24 piston install
pistons part 2 - • K24 piston install part 2
oil pump - • k24 4piston oil pump i...
head assembly - • Installing valves on t...
head install - • Installing the k20 hea...
cam shafts - • Cam shaft install on k...
timing chain - • Installing the timing ...
timing cover/oil pan - • Skunk 2 timing cover /...
cooling system - • K24 engine cooling system
end build - • k24 end build
while rotating the crank I should have rotated to the left (shortest distance). There was no piston to valve contact but definitely keep that in mind while rotating the crank.
If a MECH A NIC video helped you consider donating to my patreon account to help support the channel. / the_mech_a_nic
or my paypal
paypal.me/jonathanrenteria1986
THE MECH A NIC’s amazon store ,here’s the tools I use
www.amazon.com/shop/themechanic
THE MECH A NIC’s Instagram page
/ the_mech_a_nic
THE MECH A NIC’s facebook page
/ the-mech-a-nic-1356996...
Thank you for watching my video, I appreciate the support !

Авто/Мото

Опубликовано:

20 мар 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 185

@mikeg3757 5 лет назад

I was in tears with your sound effects lol well done

@lancelotkillz 3 года назад

I'm dead af😂

@RichardJenkinsFxCreations 4 года назад

The cat noise is cracking me up

@Silky_boi 4 года назад

I’ve never really been a Honda fan (mainly due to all the ricers out there) but seeing how well built they can be and how ingenious the alignment in regards to timing makes me want to try building one of these.

@wyattoneable 5 лет назад

If I was doing this work on this type of engine I would be paying attention. I still watched the video because I enjoy your editing and sense of humor. Plus your organization of the parts got my attention. :)

@themechanic6117 5 лет назад

I understand, these videos are very specific. This is why I try to entertain people who just watch because they're loyal subscribers 👍. It's helped tremendously to have everything bagged and tagged.

@TheCowgirlNiamh 5 лет назад

Loved it Jonathan! 👍😂😂😂 Super job on the timing too! It's looking great!

@joelvillalobos4279 28 дней назад

Great video man! Very informative and detailed. I will be following your process today as I swap my oil pump and timing chain. Thank you!

@dgreatst 2 года назад

Thanks, most detailed video ive seen so far, good job!!!

@krismcleod272 5 лет назад

I don't care what the internet says you are quite a funny guy 😁

@jonnycruz9705 3 месяца назад

Awesome in-depth video. Thanks brother! 🤙🏽

@Semystic Год назад

Amazing video! Will definitely be using it as reference when I do this job here soon.

@themechanic6117 Год назад

Thanks for watching

@alexwinterz 2 года назад

Helped me heaps mate, much thanks from down under

@BigDog50001 5 лет назад

Excellent job on this Jonathan, I would never work on those Hondas, way too complicated! ;)

@mcballer______ 5 лет назад

Clean 🙏🏼 the longer bolt goes on top of the chain guide holder I had the same problem but good job man keep up the good work🙏🏼🙌🏻

@themechanic6117 5 лет назад

Thanks! I appreciate you watching

@ktcgarage8572 5 лет назад

And the winner of the award for best actor goes to......... Haha great vid. I wanted to see the fight after the baby is someone else’s Can’t wait for start up Bet u def can’t wait

@themechanic6117 5 лет назад

I don't deserve an award lol. No fighting here...that's on the Jerry Springer show 😂

@samsaverino8159 3 года назад

Great video very thorough explanation

@georgebonney90 5 лет назад

Nice work man,i swear u had me laughing my ass off,thank u I needed that

@themechanic6117 5 лет назад

😂glad you enjoyed it. While I was recording I wasn't sure of people would find it funny or just think I'm crazy 😂

@riccoc.8891 4 года назад

Great work man, do I have to replace the spockets and if so do the guides and spockets have to be Honda OEM?

@mrcleto666 Год назад

Congratulations, best video I ever seen in youtube about hondas

@themechanic6117 Год назад

Thank you 👍

@EXOVCDS 5 лет назад

Not an interference fit engine? You moved the crank quite a bit to get it lined-up. The kid is MINE!!! LOL

@themechanic6117 5 лет назад

Looking back at it I should have rotated it the other way(shorter distance) but there was no p2v contact 👍 . I don't doubt that it is your baby 😂

@spicoZilla 4 года назад

I have a 2013 Accord Sport and the other side of the cams do not have those cam pins where you insert the drill bits. Any advice how to align both cams? Thank you

@ADR69 5 лет назад

Holy shit dude I'm getting pumped for this let's do it.

@themechanic6117 5 лет назад

Hell yeah, I'm already recording the next part 👍. It's going to look 😍😍

@kashifmalik-go6oc 7 месяцев назад

Very Very good & professional Video👍 keep up the good work 👏

@themechanic6117 7 месяцев назад

Thank you

@chrishandlow7276 2 года назад

Great video. Really helped.

@jasonmariani1258 Год назад

Excellent mechanic

@mrsamsung8184 Год назад

OMFG... rolling on the floor laughing watching you hold her hand

@ivaylotinev1461 Год назад

Great video man

@themechanic6117 Год назад

Thank you

@kevinshawntrolitzsch2100 5 лет назад

Smoke like a Marley xD Coffee filters are best and cheap rags for cleaning stuff. Keep it up, man. U are inspiring me, thanks a lot. #Miaow

@mahmoudsankari3842 Месяц назад

My engine needs a vtc actuator the part number for my engine is 14310-RZA-003 would the 14310-RBC-003 FIT instead?

@riccoc.8891 2 года назад

Excellent work dude..

@themechanic6117 2 года назад

Thank you

@manhete5009 4 года назад

Wow el mejor video del mundo mill gracias

@themechanic6117 4 года назад

👍🙏💪

@acura1384ify 2 года назад

Hey professor good video thanks... my cam gears pully arow all points mach just not the timing chain gold links it is nesesary to mach the gold links of th chain with the cam gears ?

@themechanic6117 2 года назад

It's not necessary but the colored links on the chain help to make sure it's correct

@blakewatts4067 Год назад

Ok I’ll double check my wires but I’m sure they are good. But there is a fan switch wire in the front that I just got rid of but I don’t think that would stop the engine from firing. The timing I thought I did alright because I even watched your video to double check everything I did smh. But I’ll look everything over and get back w you. Thanks again I really appreciate ya

@mikew252 Год назад

Lol love the sound effect for correct torque❤

@themechanic6117 Год назад

Thanks for watching

@johnruel1220 26 дней назад

El mejor video que e visto hasta el momento

@k24you 3 года назад

8.20 i can se your tensioner going out and in when you turn crank. My was the same. It's that normal ? My was also clicking

@themechanic6117 3 года назад

Yes that normal

@kadelarson2535 4 года назад

I really want to build a K24 now.

@themechanic6117 4 года назад

Go for it 💪

@philipdecicco4319 3 года назад

I have a 2004 accord with a 5 speed manual trans., and timing chain. A shop told me I needed to replace the chain, but I was wondering if replacing the tensioner would be enough. It has 172k miles.

@themechanic6117 3 года назад

Chains develop slack over time. Changing just the tensioner does not fix the issue

@johnr154 5 лет назад

Dope video man!!!!

@themechanic6117 5 лет назад

Thanks 💪

@rogerlam1385 10 месяцев назад

Is this the same engine in the 08 crv? Or similar

@michaelb7862 4 года назад

I'm looking at buying a car with the Honda K (K24Z3 LEV) 4 Cylinder, 2.4 L engine. Are there any issues that need to be considered? Honda Accord Euro (8th Gen 2008-2015) [known as the Acura TSX in the USA] using the Honda K (K24Z3 LEV) 4 Cylinder, 2.4 L engine. Automatic Transmission

@callmeoriginal7074 10 месяцев назад

after i did this my check engine light came on? does that mean it wasn't timed correctly ?

@themechanic6117 10 месяцев назад

Well what's the code for the check engine light?

@greghandzel4811 4 года назад

Nice video bro thanks

@themechanic6117 4 года назад

Thanks for watching

@mcdus78 3 года назад

This is so satisfying.😄

@themechanic6117 3 года назад

Thanks for watching

@xpacmaner23 5 лет назад

wow. This video helpful so much!

@themechanic6117 5 лет назад

Thanks for watching 👍

@lifeschoice6235 3 года назад

Loving the cat noises lol

@1989purry 4 года назад

Man i just bought a new set but my new chain do not have the mark link so ther eis no problem with that ?

@themechanic6117 4 года назад

As long as the timing marks are lining up and you have the cams locked it should be ok

@jorgearellano9346 3 года назад

Phenomenal video!!!

@themechanic6117 3 года назад

Thank you

@ballesteros11 4 года назад

What tool is used to remove/install left chain guide? I noticed it wasn't a 10mm socket.

@themechanic6117 4 года назад

I think its a torx bit. Not sure what size.it shouldn't be difficult to remove

@johnr154 4 года назад

How bad would it be not to replace the timing guides? My rsx s is almost about 200k. I was just thinking about replacing the chain n tensioner n I also purchased drag cartel lower guides. Think I could get away from that?

@themechanic6117 4 года назад

At 200k id replace all guides. Its not only abiut how worn out they are but the plastic guides become brittle n break into pieces... That causes major problems. If you're changing the chain, do the job right.👍

@iceman681000 4 года назад

Awesome video I like your meow torquewrench . Sorry you were not the dad 🤣🤣🤣🤣🤣

@themechanic6117 4 года назад

Lol thank you and thanks for watching👍

@k24you 3 года назад

Great video.

@themechanic6117 3 года назад

Thank you

@marcustavolacci537 Год назад

Does the engine have to come to to adjust the timing?

@themechanic6117 Год назад

It's going in my crx, it's tight in there. I do believe the engine has to come out to do timing work....

@erickcodbo3369 4 месяца назад

Thanks u , u help me when my boss didn’t.

@themechanic6117 4 месяца назад

You're welcome 👍

@xXSWAGKILLZXx 3 года назад

New sub bro.. My VTC is showing signs of going bad.. Dont want to risk messing one of my valves.. QUESTION.. I want to run a 40 gear also.. Does doing this require a tune? also what are the main benefits of doing this?

@themechanic6117 3 года назад

Im not sure but i dont think it requires a tune. The benefit of this is when you're using and aggressive cam shaft there no way for the vtec to turn on past 40° so theres no piston to valve contact . if youre using stock cam shafts you dont want to pin the vtc to 40

@HORSEDICKoMPEG 4 года назад

great vid!

@themechanic6117 4 года назад

Thank you

@Ruben901 2 года назад

So everything is good until I line up my crank mark to my mark on the chain....the top two are aligned, my crank is TDC, but the gold mark on the chain does not line up with the dot on the crank brocket....any ideas?

@Ruben901 2 года назад

So I just also want to add that I installed the chain with the tensioner, everything at TDC, top two marks aligned and top two chain marks over the dots, Crank pulley at TDC but chain mark not on the dot (maybe 2 tooths off) I placed the tensioner and circled the crank 1 time and both lines align with each and the crank is at TDC. So does this mean it didn't matter if the chain marks didn't match up? The only thing that matters is alignment of lines and crank at TDC?

@themechanic6117 2 года назад

Align all of the timing marks first and then install the tensioner . Once the cams are lined up on top turn the crank which ever way you have to to get it go line up with the timing marks.

@hectorarroyo28 5 лет назад

Part# for the long upper timing chain guide?

@themechanic6117 5 лет назад

14540RAAA02

@hectorarroyo28 5 лет назад

Thanks

@themechanic6117 5 лет назад

No problem

@jonathanlanuza7258 4 года назад

Does this apply to K20 also

@themechanic6117 4 года назад

Yes

@Reds45blues29 5 лет назад

I love your sense of humor 😂😂

@themechanic6117 5 лет назад

Thanks, just trying to have some fun while making videos lol👍😂

@bazisharoto8897 Год назад

Baazi. Hsroto

@bazisharoto8897 Год назад

Baazi. Hsroto

@bazisharoto8897 Год назад

@@themechanic6117 baazi. Hsroto

@stocklifekustomz7189 2 года назад

What chain do I use for a k20 k24 set up

@themechanic6117 2 года назад

A k24 chain I believe

@stocklifekustomz7189 2 года назад

@@themechanic6117 thanks so much I also use a key 24 timing chain cover for the same set up to right

@themechanic6117 2 года назад

Yes you'll need a k24 timing cover

@DirtyGarageTx Год назад

I’m having issues doin mines hen j set timing for the lower crank I can’t get it to line up soon as I put tension with the tensioner the crank roll over a hair so the bottom isn’t 100% lines up an can’t figure it out .any idea?

@themechanic6117 Год назад

Does your chain have colored links for lining up the timing marks?

@DirtyGarageTx Год назад

@@themechanic6117 nah I wanna say who ever had this motor prio to me had it changed at some point. ,no gold or black links an no markings

@themechanic6117 Год назад

Is it possible to buy a chain that has the colored links? If not you'll just have to count the links. It's normal for everything to move a little once you install the tensioner. As long as the chain stays on the correct teeth it'll be fine.

@DirtyGarageTx Год назад

@@themechanic6117 anything is possible with the Klarna app lol but yea I am using the chain that was in there im looking at oem currently the reason I ask was because I’m been told NOOOOO it needs to be 100% lines up then I’m hearings it’ll be fine long as it’s not jumping teeth as you stated as well an yes everything stays on tooth no jumpin firm tension as well

@themechanic6117 Год назад

If it doesn't jump teeth then it's 100% fine. On any timing job I do it's normal for everything to move a little once I engage the tensioner. As long as it doesn't jump teeth anywhere then it's fine.

@felixvalentin1618 2 года назад

is it easier to do this with engine in the vehicle or out ?

@themechanic6117 2 года назад

You can do it with the engine in (in most cases) . The engine being out is always the easiest

@DiamondScuff 2 года назад

Every part of this job becomes more frustrating with the engine in lol. Do able but not as easy.

@markferraro5250 Год назад

Thanks for video very good meeeooowLol

@themechanic6117 Год назад

Thanks for watching

@luis241661 3 года назад

bruh the cat noise scared me at first idk y 😂

@themechanic6117 3 года назад

🤣🤣👍

@blakewatts4067 Год назад

I have a crazy question about my 12 civic si. On my k24z7 I replaced the camshafts with skunk 2 drop ins and after installation now my car will crank all day but will not start. I’ve replaced sensors and even ecu but still nothing? Could the cars timing need to be set differently or something? I know if anybody knew it would be you. Thank you

@themechanic6117 Год назад

If the car ran fine before the cam install why would you go changing all those parts? Put the original parts back on to start with.

@themechanic6117 Год назад

Sounds like you messed up the timing of the engine or you forgot to plug some things back in.

@blakewatts4067 Год назад

Or what kind of things might not be plugged back in? Also on my autel scanner when checking IM everything came back in red except misfire and ccm wish I could send you the pic of it to explain better but I’m lost with this car and it’s been almost a year in the works lol

@blakewatts4067 Год назад

@@themechanic6117 I can’t because the original cams were bent when got the car

@themechanic6117 Год назад

Bent cam?? How is that possible?

@jamesgallant5670 4 года назад

Hey dude , what size drill bit are those???

@themechanic6117 4 года назад

I can't remember off the top of my head but i think i mentioned it in the video...

@lancelotkillz 3 года назад

Yea he mentioned it

@bryanrodriguez8730 4 года назад

Are you sure the drill bit was a 3/16 and not a 5/16? The bits you’re using look bigger then 3/16

@themechanic6117 4 года назад

Im pretty sure its a 3/16

@turbokefhatch9144 3 года назад

U didn’t degree that motor ? Dc 3.2 I have that same set up but I hear u have to degree motor after install

@themechanic6117 3 года назад

Nothing is adjustable...whats it matter if degree it? I have a DC pinned exhaust gear that won't allow it past 40°

@turbokefhatch9144 3 года назад

The mech a nic same here I have the sk2 exhaust cams adjustable but I thought u have to degree that motor after install those cams

@90slegends49 3 года назад

Can we use k20 top chain guide?

@themechanic6117 3 года назад

Yes

@90slegends49 3 года назад

@@themechanic6117 to remove the vtc, is it must to rmove the cam?, or can we remove vtc without removing the cam?

@themechanic6117 3 года назад

Im pretty sure you can remove the cam sprocket without removing the cam shaft

@lethalmach1 5 лет назад

Bro your funny as shit 😂

@themechanic6117 5 лет назад

Just trying to entertain lol. Thanks for watching 👍😁

@karlosmccluster7654 4 года назад

The sound effects😂😂😂😂😂😂😂😂

@themechanic6117 4 года назад

😂👍

@lancelotkillz 3 года назад

Bro I'm straight cracking up w the cat noises 😼😼 hahaha

@themechanic6117 3 года назад

Glad you enjoyed the video 👍thanks for watching

@seansk8310 4 года назад

Is the k24a type s has a balance crank?

@themechanic6117 4 года назад

Im not sure what you mean..

@seansk8310 4 года назад

Ok I wanted to know if the k24 type s motor crankshaft is balance I was told that the rsx type s has a balance crank and what do u think about the k24 type s jdm engine? Ur opinion?

@themechanic6117 4 года назад

@@seansk8310 every crank is balanced to a certain degree . if it were not balanced the engine would destroy itself.i dont know anything about jdm engines give my opinion on them.

@lancelotkillz 3 года назад

I think he means balancing shaft

@TheMaxi748 Год назад

Did you have the plugs in?

@themechanic6117 Год назад

@TheMaxi748 Год назад

@@themechanic6117 I’m doing this job but when I put the drill bits in the back , the cam lines still don’t line up. Its off by a tooth so when I try to put the two golden links on the chain at the 12oclock position on the cams, the chain doesn’t reach. I’ve tried moving the intake sprocket counter clockwise like you did in the video and it lines up for the chain but as soon as I let go of the ratchet the sprocket springs back out of time. Do you think removing the plugs will help have more liberty when moving the sprockets around? Pleaseee help man I’ve been stuck for days thanks for the video

@themechanic6117 Год назад

I always pull out plugs when I doing a timing job . It makes adjustments much easier. Try it without the plugs and see if things line up . The cam gear are usually going to want to spring out of alignment, that's normal for it to be out by a tooth. Rotate it till the marks line up and install the chain. The chain with keep everything in place

@TheMaxi748 Год назад

@@themechanic6117 thanks for the response I will try this tomorrow man

@jasonmariani1258 Год назад

The cat? Comon

@Kidd-Alex Год назад

👍👍🏻👍🏼👍🏽👍🏾👍🏿

@branbailey3239 3 года назад

1:05 I literally cried as I realized i had to take the cams/rockers out to add that honda bond lol.

@themechanic6117 3 года назад

Yes i had to take it all apart again because i initially forgot that also...

@branbailey3239 3 года назад

@@themechanic6117 i gotta tell you man your videos have pretty much made my swap possible. Thanks allot!

@Zaberdutton Год назад

@The mech a nic is it absolutely necessary for Hondabond to be placed there when putting the engine back together? My engine was bored to 86.5mm and both block and head surfaces were machined and it's a complete K20A2 not a K20/K24 is the Hondabond absolutely necessary in this case?

@adolfogarcia9296 2 года назад

great mechanic saddly he is not the father, nothing is perfect in life!

@pacific7775 5 лет назад

And it turns out that...you are ...not the father

@themechanic6117 5 лет назад

😂😂👍

@jeremyjohnthompson5187 2 года назад

why are yah saying 40 degrees vtec? its VTC, not VTEC. vtec is the duration system, that thing is the VTC actuator.

@themechanic6117 2 года назад

Did I say vtec?? I can't remember. Just a mistake on my part. It is vtc

@heribertogomez5191 5 лет назад

weird cat noise

@mrsamsung8184 Год назад

I don't know dude ...I don't see any resemblance ....I think she may be cheating on you... As a matter of fact my friend lives in her neighborhood and he sees this one guy leaving her house in a black BMW an awful lot at weird hours..😺😺😺

@logankd4640 11 месяцев назад

Dude good video but remove the dumb cat noises! Distracts from the good information you give.

@themechanic6117 11 месяцев назад

Sorry. Some people enjoy the comedy some people don't. It's a very minor part of the video. Not a big deal.

@ckelly9747 Год назад

Man is this contraption a clock or a motor. 8 rinki-dink marks required to time this wind-up ⏰️ clock. I got money, not time. I'll use repair shop to get mine done. All that time and 💰 money for 250-300 hp...gtfoh...

@themechanic6117 Год назад

300whp in a crx that weighs 1,960 lbs... that car will be like a bat out of hell lol .