Instrument cluster removal Volvo S70, V70, XC70 - VOTD 

You're welcome!

Interesting.

Interesting.

Glad to help

You are welcome. Thanks for watching.

Glad you liked it!

+Alex P It should be easy.

Robert DIY It was! I ended up putting some LEDs as backlights in the cluster. They look really nice!

You are welcome.

thanks for watching.

thanks

Glad you enjoyed it

Glad you enjoyed it

Thanks for watching

I'm sure they do.

Probably a bad ignition switch. Jiggle the key to see if things come back on.

Not really, most single and double dim units fit in that hole. The wood trim is glued to the dash in a permanent way. I have seen people cover it with carbon fiber trim tape and stuff like that but it really is fixed. If you need a larger hole you will have to McGiver it.

to fit a double din unit just take a hack saw blade and cut the supports on the inside and the double unit will just silde right in..my alpine 404 slide right in but you'll never mount a factory radio again.. you can buy factory console parts on ebay or from Robert the consoles are all pieces so anything you break or damage you can replace with a few bolts/screws...

I recently learned that the wood grain on the x70 cars can be removed with a few screws on the back side of the dash. Have fun finding and removing those screws but it is possible.

Huh?

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-x3MP9KaPMqA.html

With a Volvo level OBD2 tool.

Brad Boardwine The bulbs are very common and you should be able to get them at most auto parts stores. If not, let me know. Most Volvo parts suppliers sell them as well.

yes, very easy.

What year is the 850? I believe that only works for the '96 and newer 850's. Also, was the trip computer in the S70 activated? If so, you should have swapped in the switch and small harness for that.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6PtTUX2vA_I.html

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gt9w-ZSxs9I.html

Cluster probably going bad.

Thank you Robert.

www.ipdusa.com/products/5712/Dash-Illumination-Kit-for-Volvo-Flosser-3E870-110295

I don't even know what kind of car you have.

Robert DIY it’s a 2000 v70xc, the cluster I wanted to use is from a 99’ R

¿Ha escaneado el sistema OBD2 en busca de códigos? Es probable que algo vaya mal con la transmisión o el interruptor PNP y el vehículo haya cambiado al "modo de emergencia" para proteger la transmisión. Si borra el código con un escáner, es posible que funcione normalmente hasta que vuelva a ocurrir la falla.

I have no idea. Bring it by and I'll check for you.

Pretty sure you do, since there are screws you need to remove there, but you probably don't *need* to disconnect the battery or your non-existent airbag

lol, Did you see the tool list at the beginning of the video?

Ouch!

Thanks ✌️

Probably not.

Robert DIY damnit... thanks for reply 👍🏻😁

Bone tool or flat tip screw driver.

@@RobertDIY Hi, thanks for the reply. Just pry around the vent or are there some spots ?

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_3Q4s-lYHwY.html

Mileage is in the cluster.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6PtTUX2vA_I.html

Thank you! I’ve watched almost all your videos on the P80 cars your videos are always super helpful, I have two 2000 v70xc’s and I love them (one is a parts car)

+Steven Z you can fix the problem...

yeah buy buying a new abs unit or getting it rebuilt and wouldn't have it back in time for inspection due on the 1st

+Steven Z takes 3 days to get a module and 30 minutes to swap it out.

+Steven Z ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0zV8nGeGukQ.html

yeah for $800 which i do not have. Just going remove the light bulb. Or wire it to the low coolant light.

Sure, but it won't work

@@RobertDIY thanks, I figured

+Rodrigo Espinosa is the battery dead? What car do you have?

Robert DIY its a 1998 v70 t5 i took the battery to autozone and they said it was dead they are charging it now i don't know how it would of went dead but i hope that is it, thanks for the awesome video i needed the blue bulb sockets a few were missing in mine i went to the junk yard and got them out in under 15 minutes lol

+Rodrigo Espinosa good deal.

AwakeDude911 I have seen a couple of different options here, mostly people go red.

Robert DIY I've installed my LED's today and it's looking very nice, the colour goes from green more to a lights green/blue, but still works nicely! If you would like the more green display, you will have to put in a warmer shade of white, this way the instrument panel will colour green again (the filter in the panel creates the green like colour you see in your car. As the yellow light from the normal bulb hits the blue filter in the panel, the colour equals green. but if you put a colder white coloured LED in the panel, the light tents to pick up more of the blue colour from the filter. Red sounds kind of strange as the filter in the panel is blue, but maybe that is different in America. Also on a side note I would like to mention that the dimmer does work PERFECTLY! Just as it would on the standard bulbs. All in all this is definitely worth swapping the bulbs with LED's!

Russell Devane Yep, about 15 minutes.

yeah try this on a 85 mustang GT..this would be cake !!!

Thanks.

yep

Nie mogę jednak korzystać ze strony tłumacza Google.