Is BIM the Future of Engineering

Подписаться 55 тыс.

Просмотров 18 тыс.

50% 1

Is BIM the future of Engineering, as integrating BIM into your engineering workflow you are able to save time, reduce copy and paste errors and assess the impact of changes quickly? BIM explained in simple terms by answering questions like
What is BIM(Building Information Modelling)?
What is IFC(information Foundation Classes)?
and how to integrate BIM into your engineering workflows.
BIM explained in simple terms
BIM or Building Information Modelling is not a specific program but more a methodology on how to but your engineering models together, with Information being front and centre; And everything we do as engineers has some form of information manipulation in the heart of it, so as engineering we are able to leverage the information in the models to integrate with our designs
Queen’s Wharf Brisbane architectural flythrough • Queen’s Wharf Brisbane...
courtesy of Dept of State Development, Tourism and Innovation
What to watch next
Structural Engineering of moon bases • The Structural Enginee...
day in the life of a structural engineer • A day in the life of a...
The engineering behind 53 West 53 • Engineering 53 West 53...
Shaping Building to Reduce wind Loads • Shaping buildings to r...
Structural Engineer reacts to Grand Designs • Structural Engineer re...
The Citicorp Center a near-miss • How The Citicorp Cente...
other references • Why BIM Level 2 isn't ...
💡💡💡
My name is Brendan and I am a structural engineer with over 15 years of experience based in Australia. I have a wide variety of projects from very small to some of the biggest in the southern hemisphere. I have a passion for good structural design and teaching/mentoring.
This channel is to share my passion for engineering and provide entertaining short clips on:
- tips for young engineers on progressing their careers
- anyone needing a refresher on any design element
- design approaches
- Review past engineering failures to improve structural knowledge
💡💡💡
📧LinkedIn Profile: / brendan-hasty-48a40a3b
👍Support the channel on Patreon: / brendanhasty
🔴🔴🔴
Disclaimer: Some of the below links are affiliate links as an Amazon Associate and other affiliate programs I'll earn a small commission from qualifying purchases at no additional cost to you.
🔴🔴🔴
📚Recommended Books for engineering Communication
Try Audible Premium Plus for free amzn.to/36B4pm0 up to 2 free books
kit.co/Brendan_hasty/recommen...
Concrete Structures Warner geni.us/ConStruct
Steel Designers' Handbook geni.us/SteelHand
Soft is the new Hard geni.us/SoftHard Also on Audible
How to Win Friends & Influence People geni.us/WinFriend Also on Audible
Never Split the Difference: geni.us/SplitDiff Also on Audible
The Subtle Art of Not Giving a geni.us/SubtleArtNF Also on Audible
Books on Structures For anyone who wonder about the engineering behind building design
bringing back the fun to engineering.
Why Buildings Fall Down: How Structures Fail geni.us/WBFD
Structures: Or Why Things Don't Fall Down geni.us/WBDFD
🎥home office
kit.co/Brendan_hasty/engineer...
MX Master 3 geni.us/MXmo
Logitech K580 White geni.us/LogiK580
Samsung 32 Curved geni.us/rAIO
Philips 32 4k geni.us/32Phillips
Zbook Dock geni.us/ZDock
Zbook geni.us/Zbook
🎥Gear and Video Editing
kit.co/Brendan_hasty/youtube-...
Rode VideoMic Pro+ Microphone geni.us/RVMP
Neewer 660 LED Video Light geni.us/N660
Neewer 480 RGB Led Light geni.us/N480
Sony A7 SIII geni.us/2X1kwK
camera Samsung S20 geni.us/SS20
🎥Video Editing
AMD Ryzen 9 3900X geni.us/HVrKeZz
MSI Meg X570 geni.us/kwY70ua
RTX 2080 Super Gaming windforce geni.us/O1AC
Samsung 970 PRO 1TB geni.us/SPR70
Samsung 970 EVO Plus 1TB geni.us/S970Ev
Fractal Design Define 7 geni.us/FD7B
🎥SEO tool
Tubebuddy www.tubebuddy.com/BHEngineering

Опубликовано:

30 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@TheunsGideonJudeel 3 года назад

BIM is the future. It's a bit of an investment up front, in terms of the software, skill development and time, but it pays for itself over and over. A properly set up structural model saves so much time in the long run, and it's way more fun than just "drawing" a structure. You end up with a higher quality product with so much information at your fingertips. Thanks for a very informative video, looking forward to see more on this topic as it's a fast-moving technology and we need to adopt and adapt it efficiently as Structural Engineers.

@BrendanHasty 3 года назад

Hi Theuns, agree the initial setting up the model can be costly, but after you have put the effort into setting up the model you can quickly update and assess change to the design.

@AussieBIMGuru 3 года назад

Just found your channel - this is sweet! I get questions all the time asking who I can suggest for structural engineering and BIM, you just shot right up the top of my list. Keep up the great work mate. This video was also a great summary of BIM and engineering, I'm also including it in my 'further learning' for my University class I run on BIM. My background is architectural, so this video is super valuable to fill some of the gaps I'll no doubt leave for them.

@BrendanHasty 3 года назад

Hi Aussie BIM Guru, Thanks for watching, enjoying and your support. your channel looks great too. If there are any topics that you think would be beneficial for me to cover let me know? I am always looking to add value to the community. What is the University course that your run? that sounds amazing. Also, thanks for adding it to your recommended 'further learning'.

@AussieBIMGuru 3 года назад

@@BrendanHasty i currently run a capatone unit in BIM at USyd. Its a 5 day intensive divided across the semester, mixture of lab and lecture content. Whilst most of the students are architects I've added a lecture on engineering and analysis software (found some great examples in your video on structural top 5 software). I try to not make it too revit centric (even though we do use it here and there in lab sessions), and try to expose them to workflows and processes (iso standards, openBIM, CAFM etc). Quite bit to jam pick in! I still need to work my way through all your content, but I quite a lot of people asking about computation in structural engineering (analytical as well as automation based, e.g. karamba/dynamo) and also a lot of people are curious about modelling of reinforcement and analysis of slab deflection/loads. Might be some ideas in that mix of topics maybe? It's great how you tie back all your software examples to real practice, so tieing some of the 'why' to the 'how/what' with softwarr workflowd is super valuable for viewers also.

@berke2499 3 года назад

Another great video Brendan! Loving the quality of these videos :)

@BrendanHasty 3 года назад

Hi Berka 24, thanks for your support, hope to keep impressing.

@Cesar-ek6yw 3 года назад

Hey great content , thank you for your effort , regards from colombia

@BrendanHasty 3 года назад

Hi Cesar, thanks for watching and your support.

@mohsennejati1519 3 года назад

Brendan, thank you for sharing. Your videos are very informative and helpful. So please keep doing the great work that you are doing. Personally I am more interested in integration, optimization and and design efficiency while still designing an elegant structure. Any information on new trends in modeling and new technologies would be highly appreciated.

@BrendanHasty 3 года назад

Hi Mohsen, I will hopefully cover new analysis trends in future videos Also thanks for watching and your suggestions for topics you would enjoy.

@sajohbah6824 2 года назад

You have some amazing contents sir. Please don’t stop creating them, please let me know what other ways to support you. Other than just viewing this amazing videos.

@BrendanHasty 2 года назад

Hi Sajoh, thank you for your support via watching liking, comment and sharing my content is always great. If you watch to more directly support my content this can be done via Patreon www.patreon.com/BrendanHasty or Donate Directly via Paypal paypal.me/BHEngineering. Don't have any digital asserts or mech yet but I am working on them. Any support greatly appreciated

@robertbowden909 Год назад

Not a Structural Engr so happy to learn the key elements of another discipline.

@fakhrysami 2 года назад

Thanks a lot Brendan for this clarification 👍

@BrendanHasty 2 года назад

Hi Sami, thanks for the support. Glad that I could help.

@rogerfuentes5979 3 года назад

Great info bro thanks a lot! (from Bolivia)

@BrendanHasty 3 года назад

Hi Roger, glad that it was useful. hope to impress with future videos.

@takundatapfuma773 3 года назад

Very informative, thanks Brendan.

@BrendanHasty 3 года назад

Hi Takunda, thanks for your support.

@finiasifilipe7317 2 года назад

Love your videos. Learnt so much

@BrendanHasty 2 года назад

Hi finiasi thanks for the support.

@SustainableDreams 2 года назад

thank you. as an architect doing a masters in structural engineering, this is very interesting to me. could you talk more about rhino and grasshopper and how that is relevant to BIM?

@BrendanHasty 2 года назад

Hi Forly, thanksyou for your support. I will start planning a video on this, with rhino inside integrating with revit, it is soo powerful now for parametric design. Thanks for the suggestion.

@atabademide1020 2 года назад

Awesome content..

@BrendanHasty 2 года назад

Hi Ataba, thanks for your comment it help support the channel so much.

@ramneekdhiman6739 2 года назад

Great work 👍👍👍👍

@BrendanHasty 2 года назад

Thanks for watching Ramneek

@Vikas_Popat 2 года назад

Can you make a detailed video on QUEEN’S WHARF ?? Love from Brisbane ❤️

@BrendanHasty 2 года назад

Hi Vikas thanks for the support. I have done some breif details about QW, in my journey. But it is an exciting project.

@desireatieku9042 2 года назад

Ing. Brendan, Good job with the video. I recently subscribed to your channel and i like your videos. Pertaining to BIM, which program will you recommend i start with for the BIM process. I am a young engineer under training with interest in structures.

@BrendanHasty 2 года назад

Hi Desire, thanks for your support. It depends on which side you want to start to tackle BIM from design or documentation. Also, best to start with programs at your company. For design look into way to manipulate data so with excel with VBA or python script, for documents Revit with dynamo

@desireatieku9042 2 года назад

@@BrendanHasty Thanks for the reply. really appreciate it. Got the bell icon on for you. Keep up the good work

@AshwanikumarSainiARTER 3 года назад

Thanks for explaining the workflow Brendan! You do not mention 3DS MAX. Does it not help in designing?

@BrendanHasty 3 года назад

Hi Ashwanikumar, 3ds max is a graphical rendering tool? This is good for showing clients renders however isn't something we use for building modelling when designing structures. How do you use it?

@AshwanikumarSainiARTER 3 года назад

@@BrendanHasty I used it for creating architectural structures for events. But since 2020 the governments have stopped or postponed all kinds of events and gatherings except elections.

@SuperEdsonricardo 2 года назад

Hello, that video was very nice. I'd like to ask you Brendan if there is some kind of bim handbook in your country, and who is the main sponsor for methodology, public sector or private sector? Best regards

@BrendanHasty 2 года назад

Hi Thanks for watching. There is loose standards and follow the international guides. There are organisations that cover this in Australia. But I am not to familiar with them other then engineers Australia.

@SuperEdsonricardo 2 года назад

@@BrendanHasty Thank you !

@jasonz1301 3 года назад

Really agree with you Brendan, BIM will definitely be the future of engineering. do you know any BIM software in cold form steel industry?

@BrendanHasty 3 года назад

Hi Jason, depend on how detailed you need to go. If only standard detail revit with purpose build components would work well,big needing more shop drawing level documentation Tekla works better.

@beniaminbalint3711 2 года назад

@@BrendanHasty IFC export to- Tekla Structural Designer-export to Tekla Structures. Vs Revit bidirectional synchronisation with Advance Steel+Robot Structural Analysis(or Advance Design)? What are your thoughts Brendan?

@MegaMuhammad2000 2 года назад

Autodesk is the dominant power they control adding features to bim software like rivet But it is clear that they will not let autocad_ the flagship software_with its _gigantic market share_ down That is why for structural engineers not to fully convert to rivet

@tudothanh0402 3 года назад

I'm a structural student in Vietnam. Thank for your introduction. Can you please make more detail contents about how BIM can be applied into structural engineer like your example project sir.

@BrendanHasty 3 года назад

Hi TuDo, thanks for watching. I am planning on doing a serries of integrating design an BIM using python.

@tudothanh0402 3 года назад

@@BrendanHasty Thank you sir can't wait to see that!

@Cesar-ek6yw 3 года назад

Hey I would like to know more deeply, about programing ( machine learning, parametric or visual programing etc...) in structural engineering , for example Dynamo and Revit or even python with Revit, the use of grasshopper ( the visual programing tool ) with rhinozeros to create complex geometry to use in ETABS or SAP 2000 , machine learning in structural engineering , you know the kind of stuff that will rule the future in our field ( the latest developments ) thanks

@BrendanHasty 3 года назад

Hi Cesar, thanks for the suggestions. I will be creating a future serries that will likely cover many of these topics also any other suggestions welcome

@takundatapfuma773 3 года назад

Nearly forgot, I have never understood how programming could ne of use in Structural Engineering save for Revit. Could you in future shed some more light on that?

@BrendanHasty 3 года назад

This is something I will put into a future video, but if interested start researching Rhino with grasshopper and rhino-inside

@takundatapfuma773 3 года назад

@@BrendanHasty Will do. Thanks Brendan.

@aswin964 3 года назад

Hey Brendan, is it worth doing a masters programme in BIM?

@BrendanHasty 3 года назад

Hi Aswin, BIM is the future however not sure how useful a masters will be. provided you know how to use Revit, real work experience is also worth a lot. It may be worth working in the industry and take the masters later.

@joshuaimiavan5439 2 года назад

Thanks bro. Am Joshua from Nigeria 🇳🇬. Am structural engineer and data scientist student. Just getting to know about BIM. What’s the step by step in this Journey. Thanks 🙏

@BrendanHasty 2 года назад

Hi Joshua, thanks for watching. BIM is just the extention of engineering documentation. I will start off by getting good at structural drawings. good luck on your journey

@joshuaimiavan5439 2 года назад

@@BrendanHasty thanks for your guidance.

@yawamankwah9495 3 года назад

How can I learn these design softwares

@BrendanHasty 3 года назад

Hi Yaw, There are many RU-vid video on other channels that can get you going with the basics. But i have always found it is best to try them out.

@fajarali6481 2 года назад

revit is bim?

@BrendanHasty 2 года назад

BIM is a modelling concept, doesnt mean any software. you can produce BIM models in revit.

@ZubairAhmed-gw2sp Год назад

There is No Future of BIM..... More than 95% Companies are still using Autocad. And BIM is so Poor in 2D as well as 3D drawings and very Boring. Check the market percentage of Designing , CAD and BIM softwares.