Is the Elegoo Neptune 4 Plus 3D Printer Worth it for Beginners?

Подписаться 5 тыс.

Просмотров 7 тыс.

50% 1

The Elegoo Neptune 4 family of printers are very popular due to their affordability and notoriety. But are they recommended as someone's first 3D printer? This is my experience with the Elegoo Neptune 4 Plus.
Neptune 4 Plus Amazon: amzn.to/4aqZkvG
Elegoo Matte Black PLA on Amazon: amzn.to/3xmqfKk
***************************************************************************************************
Models Shown in This Video
Phone Stand: www.printables.com/model/7701...
Big Bricks Darth Vader: makerworld.com/en/models/3740...
Spider-Man 2099 Helmet: www.printables.com/model/6844...
Flashpoint Batman Helmet: www.printables.com/model/1961...
Helldivers Peacemaker Prop: makerworld.com/en/models/2231...
****************************************************************************************************
Chapters
0:00 Specs, Price and Uses
1:14 Beginner Friendly?
2:04 Assembly Process
4:37 Leveling Process
6:56 Z-Offset Problems
9:45 Updating the Firmware
11:55 Things I Like
14:55 Print Samples
21:39 Conclusion
******************************************************************************
Coupons and Deals:
JLCPCB 3D Printing Starts at $0.30 & $54 Coupons for New Users Here: 3d.jlcpcb.com/?from=FigureFee...
Card Mafia: Use the Promo Code "FigureFeedback5Off" for 5% Off Your Card Mafia Purchase! : www.cardmafia.com?sca_ref=2492569.wSUwkQ9aSr
******************************************************************************************************
Socials:
Check out my other channel: / @jeremyhill
For business inquiries, email me at jeremy@figurefeedback.com
Follow on Threads: www.threads.net/@jeremythill
Follow on Instagram: / figurefeedback
******************************************************************************
My 3D Printing Equipment (Affiliate Links)
Anycubic Photon Mono 4K: amzn.to/3odVEKT
Anycubic Wash and Cure 2.0: amzn.to/3pH41ii
Anycubic 3D Printing Grey Resin: amzn.to/3Wdv8xK
OnePeng Grey Model Resin: amzn.to/453cIDF
Anycubic Eco UV Grey Resin: amzn.to/45cB4ei
Siraya Tech Easy Grey Resin: amzn.to/3MyZCam
Mealos Silicon Mat: amzn.to/3pRJoAg
Gorilla Super Glue Gel: amzn.to/42c4TcA
Vallejo Model Air Set: amzn.to/3oTfGdP
Timbertech Airbrush Kit: amzn.to/3CbuuI0
Creality Ender 3 Pro: amzn.to/45dvGIe
Creality Rainbow PLA Filament: amzn.to/3WfYLP9
Inland Silver PLA Plus Filament: amzn.to/3BxpHQO
Inland Grey PLA Plus Filament 2-Pack: amzn.to/432tmSg

Развлечения

Опубликовано:

6 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@Funktional3DPrints 2 месяца назад

Loving your videos thank you

@prodby430 2 месяца назад

The Z offset issue was fixed in the firmware and the heatbed issue can be fixed if you preheat the bed for 30 minutes and start the auto calibration after.... (Neptune 4 Max)

@TheOscylO Месяц назад

10-15min for Plus

@Krendro 2 месяца назад

I was so close to buying this printer a few weeks ago due to needing a larger build volume than 220x220 for quite a few projects. I ended up getting a Qidi X-Plus 3 as the build volume is good for my current needs and I wanted to see what the core XY side of 3d printing was like. Hopefully the next iteration of the Neptune series will take a step forward in the dated aspects that you mentioned in this video. All in all, this was a great video all the way around and I look forward to seeing some more of your content in the future as I just hit subscribe.

@genises200 2 месяца назад

Im a newbie here. I personally loved the 4plus and its AMAZING. I wish i jad a Bambu labs as my friend has one but its pricey. I did research and followed the foundations of what to do and man im having a great time. I am opening my shop after having good sales from local craft shop. Maybe im in the minority but could be a major part of i domw kmow the bads from being experinced and because of that "old world tech" seems like its the norm and part of the process

@kakarrot62 2 месяца назад

New to 3d printing and i just ordered this printer. looking forward to getting it and learning. I'm a handyman type of guy so i am not put off by having to tune it. i work in IT and am used to having to tune stuff to get it working. Thanks for the great video.

@user-yx2wn7ew9b 2 месяца назад

How did that turn out for you? I was of the identical mindset and now like a month later I still can't get it to work and am on the verge of throwing it out of the window just to see it shatter into tiny pieces - that would be the biggest satisfaction it gave me so far.

@kakarrot62 Месяц назад

@@user-yx2wn7ew9b i got it working fine. just watch alot of videos on youtub. here it is in a nutshell: heat the bed to 60 deg C. put a piece of paper in the middle and press the level button. in the z offset in the middle of the screen move the head up and down until you can pull the paper out but not push it in. then press the auxilliary button. do the same for all of the positions in there and adjust up and down using the wheels under the bed. when all done click save. for the print head settings i use 205 deg C for the head and 65 deg C for the bed for PLA. after that i got good prints. there is other calibration that can be done to get better results. i use Orca Slicer and it has calibration tool that work great. Give it a try. let me know how you make out. i do this bed leveling calibration every so often ( abt 2 wks) because use moves the wheels underneath throwing off the levelling.

@Bodyman4life 2 месяца назад

I agree.. the pro was my first printer and first prints was great then started to get not so great and updated and fix some issues. But this printer forces you to learn and dont regret it because learned a lot. With all my tuning have great and consistent prints now. My next printer it going to be bambu labs A1 when it available. The mini just to small for me. Great video 👍🏼

@JackKennedy1963 7 дней назад

Hey, thanks for the video. You mentioned that there are better printers out there for beginners. What printers would you recommend?

@aloneinfiction4101 2 месяца назад

Can you recommend a beginner 3d machine in that same size of specs?

@hiimsanvo 2 месяца назад

Thanks for sharing about the setup and teaching me about hueforge.

@FigureFeedback 2 месяца назад

You're welcome!

@garomcfbgdd3211 2 месяца назад

I'm going to start using the term "Helmet Class" to describe that size of printer 🤣

@JameTek 2 месяца назад

Very good and fair review. I've got the Neptune 4 Max, more or less the same beast. I found updating the latest (.65) firmware fixed my z-offset issues. The machine definitely had a rocky launch, but the latest firmware work quite well. The print quality is very good. You are spot on, it's a good deal in terms of price, but I wouldn't call it newbie friendly -- especially now we're seeing printers with auto z-offset becoming a standard feature at lower price points. It's a good machine, if you can put up with some fiddling.

@mid4013 4 дня назад

What retraction settings are you running ?

@ronfrancis5476 2 месяца назад

An incredibly honest review! I have this printer,and I agree with every point made. It has paper-under-the-nozzle bed leveling ... but I think this is a great addition to auto-bed-leveling. Not for the beginner, but still a good entry-level printer for a technical person on a budget.

@pacificcoastminiatures 2 месяца назад

I had considered getting this printer but ended up with the Adventurer 5M. Some of the things you mentioned plus not wanting a bed slinger. So far very happy with the 5M.

@TheRoninTezz Месяц назад

Can you print full size helmets with the 5M? I want to do helmets like Magneto, Samus, Master Chief, Nova, etc. That and cosplay armor pieces are what I’m really going for. Ik I’ll have to slice armor but could I do adult size helmets in one piece?

@LarryBerg 2 месяца назад

I have the side of gantry/base I’m fastening slightly hanging over the table so I can fasten the screws easily. The bulk of the printer is still supported by the table.

@DrewLSsix 2 месяца назад

I never got this complaint about this style printer, many non technically minded consumers manage to install the feet/base on their new monitors/televisions every day. The difference is, anyone working with a 3d printer will absolutely need to acquire some basic skills in working with these machines, assembling 2 major components is the least demanding thing you'll ever do once mods service or repairs inevitably become a thing.

@joshehutch Месяц назад

When you put the printer together you can just put the base on a table, hanging off the edge of the table 5-6 inches, and then screw the gantry onto the overhanging base. No tilting required.

@supergitarzan 16 дней назад

I’m not VERY experienced 3D printer user but I just bought this Elegoo unit and found it RIDICULOUSLY easy to setup, calibrate and get printing. I found the CURA program clumsy and cumbersome off the bat but was able to figure that out fairly quickly as well. IMO, this is a FANTASTIC printer for a beginner who is at least computer/software savvy.

@viccingold 13 дней назад

I used Orca slicer mainly because I use Ubuntu, but it is great. You should give it a try,

@bob557 2 месяца назад

Wow I got this printer, and the neptune 3 pro. Both are amazing and setup in 15-20 minutes with near perfect prints. User interface is so simple and the way you would think it should be. And give me zero issues compared to all my other printers. Even the Bamboo printers have had their share of issues. If you are thinking this hobby is like using a microwave it is not! It will require some input from you. It is a hobby.

@danielkorrmann5467 2 месяца назад

If you want printing as a hobby, thats fine. But other might want a tool.

@BrainActivity1 2 месяца назад

Did you print anything big covering the whole or most of the build plate?

@bob557 2 месяца назад

@danielkorrmann5467 well your in the wrong market. You will pay thousands for a commercial machine. And it will still need calibration and tuning from time to time. All the printers being talked about are hobby grade. But so far my neptune printers are giving me more bang for the buck than anything else . What really gets me is the near perfect layer lines and print tolerance using stock elegoo profiles.

@danielkorrmann5467 2 месяца назад

@@bob557 Are all tools you use in your house commercial grade ? No. Some people buy a printer because they want to print stuff. Not because they want to tinker with the maschine. Like i own a oven to bake things and not because i like to tinker with it. These user exist and should be able to buy mashines that are made as tools. I like to make my Ender 3 a frabkenstein beast, but if people want to use a printer out of the Box thats fine.

@bob557 2 месяца назад

@BrainActivity1 yes I have and if the bed gets loose you tighten the nuts to they just snug and rerun bed calibration and it's good to go. I've printed a 12in by 12in organizing tool box I scaled up a little. I've printed a 58hr and 62hr airless basketballs out of pla flex. On neptune 4 plus. And I couldn't list all the prints I've printed on neptune 3 pro and I've only ran bed leveling on it twice. I just hit print a walk away with these machines, don't even watch first layer go down.

@yrmuq 2 месяца назад

And what the best printer for beginers and with all 2024 perks?

@FigureFeedback 2 месяца назад

For around the same price, I'd say Flashforge Adventurer 5M, Bambu Lab A1 Mini or Creality Ender 3 V3 KE.

2 месяца назад

A1Mini. It just works.

@janvde7356 Месяц назад

When did you make the video

@anthonylong5870 26 дней назад

Jeromy I think you kinda missed the mark on when you were talking about this printer at the beginning. You kept comparing it to a Core XY machine and went into detail about how a core XY is better...Well thats not really true because there is NOT a Core XY that has a big build plate and that can make big things...Like this printer can. This printers main focus is BIG PRINTS. You should have put that out there while you were talking about it not being as good as a Core XY...

@davidcooper574 Месяц назад

You don’t need the big fan. Took mine off the first week. Get’s in the way of large prints.

@dkev001 2 месяца назад

I sold mine. It was a total dumpster fire. I got a Kobra 2 plus instead. That printer has been money from the start.

@user-yx2wn7ew9b 2 месяца назад

I've been thinking about doing the same but K2 has its own massive list of problems that people report, one of which is a terrible or nonexistent customer support.

@donniem7979 Месяц назад

good lord even if you updatw and prep machine fir two days its still a waste to buy... bambu mini it is

@1pokemon2fan3kv 7 дней назад

You should use the principle : SHOW not TELL. You make a lot of arguments, very well explained ect ect. but for a review this doesn't show anything worth for examples of your arguments. All while this is a video format review.

@ClydeBarrow2067 2 месяца назад

Imo this is a false review. I am brand new to 3d printing. Only watched videos prior to buying this Elegoo 4 plus printer and it set up so easy and made my very first banshee in less than an hour. Saying that this is not for beginners is like pointing out that first timers are less than smart. A person can watch a video once on the printer and orca software and be good to go. Ive had mine for about a little over a month and ive printed quite a few things with no issues except for user error such as didn’t clean the bed and didn’t put glue on the bed. This printer also comes shipped with the latest update firmware now.

@dudhman Месяц назад

You might not represent the typical beginner.

@Exilor Месяц назад

Glad to see needing glue isnt all that odd because an article said i shouldnt because of how the bed is but my shit kept flying off so i wondered if i did something wrong.. 1 thing that i did find out though was if i press leveling and set the z offset and let it home again, the nozzle has the same number but in reality the nozzle isnt EXACTLY on the same spot 🤔

@NoMercyFtw 2 месяца назад

Nope not for beginners Elegoo and Anycubic are not for beginners there's too much deviation in their machines, IMO I think these machines are great for tinkerers, i made a post on reddit about the Kobra Neo...........................

@genises200 2 месяца назад

I disagree. This is my first one and it's been amazing! Just two 3 videos and I got the basics down. Opened up my own shop and started selling. It's amazing

@NoMercyFtw 2 месяца назад

@@genises200 if you're a tinkerer yeah they're fantastic but if you don't know that you have to tinker with these to get them to print well then no they're not for beginners and usually a beginner is not a tinkerer

@genises200 2 месяца назад

@NoMercyFtw A tinker could be a beginning. Not like I was an expert at first. Not much tinkering I see it if you just follow the basics and other more experienced people do but I see your point

@NoMercyFtw 2 месяца назад

@@genises200 of course obviously anybody could be a ******* beginner you're a beginner when you do something for the first time but the type of beginner I'm talking about is somebody who wants to turn something on and for it to work out-of-the-box and not have to do 2 to 3 weeks of setup and tweaking, either you're oblivious or you work for one of these companies either way GFY

@genises200 2 месяца назад

@NoMercyFtw I see you couldn't hold a civil conversation. I even said I understand your point on some of these issues. My next go to is the Bambu Printer because of how cool the multi color print is! We'll I appreciate your input and hope you have a good day and a even better week