Тёмный

Is the PlanetFlame Heat Press with Slide Out Worth the Money? 

Transfer Superstars Direct to Film DTF Printers
Подписаться 28 тыс.
Просмотров 1,7 тыс.
50% 1

Welcome to Transfer Superstars! Join us as we take an in-depth look at the PlanetFlame 15x15 BUDGET Slide Heatpress. Unfortunately, this review reveals critical shortcomings that impacted its performance.
Timestamps:
00:00 - Introduction of specifications of the Planet Flame Heatpress
02:31 - Unboxing
02:53 - Instructions
03:56 - Turning on and setting up the heatpress
04:40 - Adjusting the pressure (Failed Dollar Bill Test)
05:47 - Heat Distribution Test (Failed)
08:12 - 14 Inches Slide Out Feature (Potential Cause of Pressure Issue)
10:27 - Heat Pressing the shirt
14:30 - Checking the Print
15:40 - Wash Test Result (Failed - Print Wrinkled)
16:55 - Recap
20:45 - Cons
Content:
In this comprehensive review, we delve into the PlanetFlame 15x15 BUDGET Slide Heatpress, uncovering significant flaws that affected its overall performance.
Upon initial assessment, the heat press failed to meet the required pressure in the top part, as evidenced by its inability to pass the dollar bill test. This lack of pressure directly impacted the final print quality of the shirt, resulting in inconsistencies and imperfections.
Furthermore, our heat distribution test revealed a concerning issue. While the lower temperature on the bottom part of the press did not directly affect the print quality, it highlighted an inconsistency in temperature throughout the machine. This inconsistency could potentially lead to varied results in different printing scenarios.
During the wash test, the heat press failed once again. The print on the shirt, particularly on the top part, exhibited significant wrinkling due to the lack of pressure. This flaw further emphasizes the critical importance of adequate pressure for achieving durable and high-quality prints.
Upon closer inspection, we discovered that the pullout feature might be contributing to the pressure issue. The slight sagging observed when the pullout feature is extended could be impacting the overall pressure distribution, exacerbating the problem.
Despite its innovative features, the PlanetFlame 15x15 BUDGET Slide Heatpress falls short of delivering consistent and reliable performance. Join us as we analyze these shortcomings and provide an honest assessment of its capabilities.
Don't forget to like, share, and subscribe for more insightful reviews and analysis from Transfer Superstars!
💻⚡️Order Custom DTF Heat Transfers transfersuperstars.com/order
💻⚡️Order a FREE Tester Pack transfersuperstars.com/tester
► LINKS MENTIONED
-Planetflame 15x15 amzn.to/491KKcy
-Bella Canvas 3001 amzn.to/3T6Uso0
-Prisma 16x20 www.transfersuperstars.com/pr...
⬇️ More stuff you should check out
Premium Heat Press Pillows amzn.to/3WqmawM OR amzn.to/3gioPbb
Tape Dispenser amzn.to/3vKOVZj
Heat Tape amzn.to/3Ss7QC3
Infrared Temperature Gun amzn.to/3hJ94uG
Most Affordable 15" x 15" Heat Press on Amazon for $190 amzn.to/3h2trTa
[COMPLETE LIST] DTF Heat Transfer Pressing Supplies on Amazon amzn.to/3TUrZQT
Heat Press Recommendations (BUDGET)
PowerPress 15x15 on Amazon amzn.to/3SPWFWj
Geo Knight Digital Knight 16" x 20" Clam Auto-Open Heat Press shrsl.com/49tsz
Hatpress By Stahls' Hotronix 360 IQ Hat Press
shrsl.com/49tt3
► SOCIAL MEDIA
Instagram: / transfersuperstars
TikTok: / transfersuperstars
RU-vid: / transfersuperstars
Facebook: / transfersuperstars
Linktree: linktr.ee/transfersuperstars
Programs:
Sign up for CANVA PRO (FREE AS TRANSFER)
partner.canva.com/1rQ616
► DTFPRO DTF Printer Supplies
Film dtgpro.com/cicproduct/dtf-pro...
Inks dtgpro.com/cicproduct/dtf-pro...
Adhesive Powder dtgpro.com/cicproduct/dtg-pro...
Printhead Cleaning Solution dtgpro.com/cicproduct/dtg-cle...
Printhead Cleaning Solution (Strong) dtgpro.com/cicproduct/dtg-xtr...
Foam Swabs dtgpro.com/cicproduct/dtgpro-...
Syringes dtgpro.com/cicproduct/dtg-ink...
► CUSTOMER REVIEWS
Google g.page/r/CTcIkuv_pMlKEAI/review
Yelp www.yelp.com/biz/transfer-sup...
Disclaimer: By making a purchase through any of our affiliate links, we receive a very small commission at no extra cost to you. This helps us on our mission to provide quality education to you.
#dtfprinting #dtfprinter #directtofilm #dtftransfers #dtflosangeles #dtfprint #dtf #dtffilmprinter #dtftshirtprinting #dtfmachine #dtfprinters #dtftransferprinting #dtftransfer #dtfprintertshirt #dtfmachineprinter #PlanetFlame #Heatpress #Review #FailedReview #TransferSuperstars #HeatpressReview #HeatpressTesting #Printing #TshirtPrinting #ReviewAnalysis #DIYPrinting

Хобби

Опубликовано:

 

15 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 19   
@JayPierstorff
@JayPierstorff Месяц назад
For uneven pressure, many of these similar design presses can be adjusted by loosening the two hex bolts that attach the lower plate on the underside. Loosen them just slightly to allow the bottom plate to tilt and match the angle of the top.
@authentichunt
@authentichunt 2 месяца назад
Look amazing let see
@Sgrg1994
@Sgrg1994 3 месяца назад
I realy lov to watch your videos and because of you now i know which one is best heat press but the problem is none of them are available in australia …. Only htv ront and vevor is available among all the heat press you have mentioned in your videos😅
@transfersuperstars
@transfersuperstars 3 месяца назад
Ohh noo, thats not a lot of options you have available there. Definitely stay away from the HTV Ront for DTF use.
@markweese2720
@markweese2720 3 месяца назад
You could shim beneath the runner/base for fine-tuning of the pressure.
@transfersuperstars
@transfersuperstars 3 месяца назад
Not sure how that works.
@steviesteve1716
@steviesteve1716 3 месяца назад
Wow this is crazy just this today
@transfersuperstars
@transfersuperstars 3 месяца назад
Thanks
@milovs7
@milovs7 2 месяца назад
What do you think of the TUSY Auto Heat Press 15x15?
@transfersuperstars
@transfersuperstars 2 месяца назад
Its a great budget press from Amazon. We've had great results.
@priyanshubhattacharya35
@priyanshubhattacharya35 3 месяца назад
I love your designs. How to design like that.
@transfersuperstars
@transfersuperstars 3 месяца назад
We have a team of graphic designers that solely make artwork for our videos
@crazyedit8920
@crazyedit8920 3 месяца назад
Why you don't use dtf powder ? Pls answer
@transfersuperstars
@transfersuperstars 3 месяца назад
We already powder and cure our transfers during production before making the video.
@crazyedit8920
@crazyedit8920 2 месяца назад
@@transfersuperstars ohh
@crazyedit8920
@crazyedit8920 2 месяца назад
@@transfersuperstars I am new in this business so I order dtf prints from a manufacturer so do I have to cure it or not?
@transfersuperstars
@transfersuperstars 2 месяца назад
@@crazyedit8920 you would not, they would arrive, ready to heat press directly onto apparel
@crazyedit8920
@crazyedit8920 Месяц назад
@@transfersuperstars ok ,thank you very much ❤️
@Nobody111
@Nobody111 3 месяца назад
Crap uneven pressure. Don't buy.
Далее
BEST Heat Press for DTF under $300!! PART 1
37:21
Просмотров 79 тыс.
Дьявол - ТРЕШ ОБЗОР на фильм
19:10
HEAT PRESS - 16x20 vs 15x15
11:30
Просмотров 22 тыс.
😳Ooops 😳 #littos
0:29
Просмотров 5 млн
Что она делает?
0:34
Просмотров 2,1 млн
ЗЛОЙ ВЫХЛОП на КИТАЙЦА #shorts
1:00