Is this cheap top end kit as good as a Wiseco??? Project Ranger 500 Part 3 

The cheap cast piston could be bore matched to the cheap cylinder. Shiny isn’t always better lol.

Dude, I could literally see where the crosshatch stopped lower into the cylinder where the piston rings don't run down that far when you tilted the cylinder at 3:39

Nice job once again! Love to see a video of you ripping it around.

"Pistons always look cool, man" Could not agree more! Amen!

I’ve used cheap pistons on all my quads! The 2006 Blaster I paid 70$ for piston and jug, and that was 5 years ago. My son rides it pretty hard too

I got a cheap kit lol. Ran just fine, had tons more power, and had really good compression. Rode it for about three days then sat for about two days. Went to start it up and it was smokin harder than a freight train! Piston skirts wore down and chipped off and shaved the cylinder

Great video! Looks like you have been hard at work brother 🤙👊 glad to see her running well so far. The outro man that was killer too.

That random “say no to drugs” sign 😂 Great video!🤙

Unless you are going to run 150hp shot of nos you don't need a forged piston Also forged pistons wear out the cylinder walls quicker especially the nikasil coated ones Thicker pistons side walls means that it will expand more due to more material so you will have to run looser tolerances.

of course we want to see you ripping it up just make sure it has fuel 😂😂 great job keep them coming 👍👍👍👍

Hey! I'm not the only one who knows the trick on making the cylinder head flat again with sandpaper. I have done that many many times. I've had people tell my I'm stupid for that and so on. I Would get rid of those Wire Nuts and Solder then Heat shrink the wire back together.

Have you had a good or bad experience with aftermarket top end kits? Let us know about your experience in the comments below! Thank you for watching my video, you guys ROCK! 👊👊👊

Hello there! Great work on this video and repair! Is it possible for you to share a link for that top end kit you bought? I've been looking and so far I can't find one with that elbow on the cylinder housing. I would appreciate the help, thank you!

Wow I love how you actually used a torque wrench on everything

I would never put any cheap Chinese made junk inside my big dollar engine... Good way to cost yourself several thousand dollars because you want to cheap out on a major engine component to save a couple bucks..

@13:11 I think you should get a digital scale as you seem to be a bit confused on how to read an analog gauge.

Only thing better than Wiseco is OEM

Love theses kind of vids on utility atvs and sxs racing atvs have never been my thing just figured I'd let you know I'm all for this content!

Dont take it out for more then a test ride. Not an all day deal... You need to sell not fix it again. AWESOME job. I could have got a 2009 nice condition KFX450r for 600 bucks.. I passed because the case was taken out from a chain. Bike ran great however the JB weld he did was leaking pretty bad. New engine cases are expensive and who knows what ill find in a 10 year old race quad. I didnt make sense to me to buy it and have to completely rebuild the whole engine even if it was 600 bucks.

Also the cheap piston is poured aluminum and the Wiseco piston is pressed aluminum so it's much denser aluminum all around

Do you have an update on the cylinder? I’m thinking about buying this kit and I am lil nervous about it. I will be using the piston that comes with it. Just gonna be a cruiser so not gonna be dogging it and making a mud machine out of if. Think it will be ok?

The oil rings groove oil holes look nicely spaces and such too, also this knockoff looked heavier built (thicker) than the old knockoff..

Cant wait for the next video. I really enjoy them

I enjoyed watching this video!… It was pretty good ..and I have a parallel twin ..and I’ve done this stuff before but it’s still nice to watch someone else do it LOL

Pay the extra little money for the better internals now so later you don't have to spend a lot of money on a new engine after the cheap parts explode on your 3rd lap around your house.

Never use a 3m rolock disc to clean gasket surfaces they will cause high and low spots on surfaces from removing metal . seen heads and blocks have to be milled because of it.

If your working on vintage Japanese bikes look for the ebay seller cruzinimage. Pistons are well priced, very close to matched on multi-cylinder sets, and very good tolerances.

take the stator cover off the other side to turn and time

Nice job. I’m building a banshee I will send you pictures on Instagram when it’s finished

You almost need to run two toys side by side. One with cheap parts and one with known quality parts and just see what happens. I personally have only put quality parts on my toys. Can't afford the oops if it comes apart right away.

It's the internet there's always going to be haters

I bought a cheap top end kit for my blaster just to see what would happen because people gave it a good review. I tried it and the first start up would of course not stay started but it would never stay started. I took it apart and the piston rings were seized to the piston and the piston clips were melted to the piston. Dont buy cheap stuff

To get a flat surface to lap to try using a piece of glass to put the sandpaper on. Most glass is relatively flat.

Mike Sabo did the gasket kit hold up

use china block yes but check it bore n throw piston n pin in garbage waffel mark forged othere one is cast be fine in a old 350 chevy stocker or a stationary engine but high flow japan atv or even polarasis never use china piston pins or bearings,,i got silicon gasket maker in a cheap gasket kit it was crap more clay in it than blinder brittle lol funny stuff

Great video i love to see the stuff ive never done before you can learn a lot 💯🔥🔥🔥

Great video. Darn near spit my coffee out at the Zebra head. Lol

I honestly enjoy watching your videos

take the timing flywhel cover off, lots easier than than belt cover

Hey anyone ever heard of namura piston kits? Think they good for a banshee?

Wiseco piston is wayyyy stronger.

You're the man bro! Happy to see another video. Take care

Awesome video 💪💪💪

i bought a brand new cylinder from Yamaha for my 04 yz250.. glad i cleaned it... pretty sure they mention that in the manual tho.

Wiseco hands down! No other pistons out there comes close to there product.

When you buy new for the most part you get what you pay for quality

HF oil filter is a good quality filter.

Only difference between the gaskets your using is the price Polaris gasket are made in Japan so that's the only difference .

Wiseco now has a sticker on the boxes and if the seal is cut it's been tampered with and may have a different part.

That'd be lighter reciprocating, not rotating mass lol. Honest mistake. Thanks for the video, i love these comparisons.

i like how you weighed the pistons... thumbsup!

U can check scales using a nickel they way 5 grams

Great video

You don't have a $25 digital scale....?!?! At some point in the past weisco was a new company producing low quality parts BUT they learned how to create better quality parts and developed a brand. So did the Japanese..and so will the Chinese.. If I knew that I created low quality parts and at some point in the future I would improve, I wouldn't put my name anywhere on the box.

Do you have a link for these kits

nice video keep up the good work mike 10/10 content. i had a question about Chinese parts for stuff y can you find a ton of china top ends for blasters 400ex's banshees yz's ect but for some odd reason nun at all for lt250r's i have 2 that im building right now one a trick quad and one a ''beater'' but their are no parts from china at all you can not find a cheep top end kit cylinder pistons head the hole 9 like you can for a ton of other stuff i was just wondering y that is my first guess was age but that's not the case at all lt's are old just as blasters shees ect then i was thinking it was a brand thing that yamaha and honda were the only brands that you can find cheep china top ends for but no you can find the same cheep rebuilds for rm's ltz's and ltr's but y not the lt250r. if you mike or anyone can give me a answer on y this is or a place that sells legacy year lt parts (1985 and 1986) i would love the imput anyway keep up the good work love all the vids and i cant wait to see what 2 smoke 250 you pick next to do a build on trx250r or lt250r (ps the correct answer is lt250r duuuu ) ( and yes i know you have had one and know a lot about em and for you it might be a bit ''stale'' but for the people at home watching you might connect / interest more seeing as thier are way way more people that own lts and not trx's due to rarity and cost to up keep just some food for thought i my self would be happy with any one of the 2 ) have a good day -king0fversaibackinaction ;]

U should resit the valves for better seal meant

Optimus quality, say no to drugs...

Looks like a standard sportsman air filter 7082101 instead of 7081308

Love your videos bro!!

It would be cool

keep up the good work bro!

Great content, man!

I jumped when you popped up with the mask

I just like the forged Wiseco pistons so much more. I'm staying away from cast pistons.

The only quad i likes was the Zilla.

Have any TV networks hit you up on starting a show? Seriously Mike keep up the good work brother!

Is there no honing needed to be done on the cylinder wall?

Nice!! Definitely gotta rip it

Mike where do you get your services manuals from?

I’ve raced dirt bikes my whole life, I found out if you going to replace something. Go ahead and spend the extra money.

Definitely take it out for a rip!

did this ranger have alot of hours on it?

Jcc is a Taiwanese casting company. Appears to be a legit company.

Where did you locate the service manual?

So is the cheap one ok

continuously variable transmission (CVT)

How many hours were on it before you rebuilt it?

Need a new video on the dirt bike please

I also use mobile 1 European car formula

Take it out 4 a ride

Lose the wire nuts and do it right.

You should take it for a ride

wiseco is forged, other is cast

Take it for a ride

Sold I'm buying me some cheap Chinese pistons

You should definitely get rid of the house wiring b*******... soon as I saw that I was very disappointed. Up until that point it was good video. House wiring and Automotive wiring never work together ever.

you know hes a metalhead when you said mega grey

Hey can i get another MS sticker from you again please? Have a different quad now..02 Honda Trx 400 ...ill post some pics to Instagram soon

Rip it mike

You should keep it

Weisco isnt the best either buy pro x, vertex or oem which is practically what pro x is

Taiwan machining is superior to Chinese.

You should take it out for a rip before you get sell it

Rip it then sell it

Muppet

😂😂😂😂😂😂😂😂