iSpring RCC7 Series RO System DIY Installation | Step by Step | Latest Edition

Подписаться 13 тыс.

Просмотров 105 тыс.

50% 1

In this video, we will show the step-to-step installation guide of iSpring RCC7 Series Reverse Osmosis Under Sink Water Filter Systems. Please give this video a thumb up if you think it's helpful. If you have any questions about the product or installation, feel free to contact us at 678-261-7611 (M-F, 9-5 EST). We are always happy to help!
0:00 Intro
0:31 Before We Begin
1:19 Installation- Feed Water Adapter
2:33 Installation- Drain Saddle
3:19 Installation- Drinking Faucet
4:28 Installation- Water Storage Tank
4:58 Installation- RO Membrane
5:56 Prefilter Wash
7:41 Installation- Leak Stop Valve
8:46 System Installation
9:59 System Startup
When looking for the finest drinking water available, right in your home, look no further than the iSpring RCC7 series reverse osmosis water filtration systems. This RO filter system removes virtually all contaminants from your drinking water, leaving you with pure, clear, clean, great-tasting water and nothing else! Backed by superior iSpring quality and service, here is a system that will give you many years of trouble-free, low-maintenance peace of mind.
RCC7 series RO systems include the following models: RCC7, RCC7D, RCC7U, RCC7AK, and RCC7AK-UV
Get replacement filters: www.123filter.com/ac/replacem...
Get your iSpring RO system: www.123filter.com/ac/reverse-...
----------------------------------------------------------------
How to find us:
• Facebook - / ispringwater
• Instagram - / ispringfilter
• Website - www.123filter.com
• Amazon Store - www.amazon.com/ispring
• Phone - 678-261-7611 (M-F, 8:30 - 5:30 EST)
• Email - support@123filter.com
--------------------------------------------------------------------
#ReverseOsmosisSystem #ReverseOsmosisWaterFilter #ROInstallation #reverseosmosiswater #reverseosmosiswaterfiltersystem #reverseosmosisdrinkingwater #reverseosmosis #rosystem #waterfilter #rofilter #undersinkwaterfilter #waterpurification #ispringwaterfilter #howtoinstallreverseosmosis #ispringreverseosmosis #howtoinstall #homeimprovement #rowater filtrationsystem #waterfilterforsink #reverseosmosissystem #ispringRCC #ispringrcc7ak #ReverseOsmosisWaterFiltrationSystems #reverseosmosiswatersystem #undersinkwaterfilter #waterfiltersystemforhome #waterfilterinstallation #waterfiltrationsystemforhome #waterfiltrationsystemundersink

Хобби

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 132

@mtcondie 2 года назад

Great directions! Thank you! Just installed an RCC7AK system. The installation was pretty easy. I look forward to using the system.

@udemysuccess2160 4 месяца назад

this thing changed my life in so much better thank you ispring

@iSpringWaterSystems 4 месяца назад

Hi dear customer! Thanks for your comment! For any concerns or questions, do not hesitate to contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST, or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!

@freeman316 2 года назад

I bought the AK version that include the remineralization stage. I wonder this alkaline stage is adding iron to the water since I tested with iron test strip and it came positive (a little bit brown color towards the maximum)? Do you have video to skip the 6th stage?

@iSpringWaterSystems 2 года назад

Hi Ben. Here's the video on how to remove the akline filter from your RO system: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pWfc7HMnGVU.html.

@darenleiter9490 6 месяцев назад

Just installed the RCC7AK (Jan. 2024). The QC coupler leaked after running the water for 5-10 min. Fortunately, I hadn't installed the (one-time leak stop valve) yet. There was no information about where to install it in the installation manual. Glad I watched this video and found out where and how to install the leak-stop protection valve. There are many complaints about leaks on the Amazon website, but good customer service (replacing defective parts quickly).

@iSpringWaterSystems 6 месяцев назад

Hi there! Thanks for your comment! If you have any questions or concerns, please, kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!

@JimmyRussle 2 месяца назад

leaks are almost always due to poor installation.

@paisley436 2 года назад

The instruction manual discusses the option of mounting this on the wall and that there should be supports underneath the filters. But I see no recommendations or guidance about how high off the floor this should be mounted in order to allow filter replacement. Any guidance?

@OpusBuddly 2 года назад

Two inches should provide plenty of clearance. The threads are about one inch then the filters are accessible.

@danielpoitras7494 Год назад

the drain line should be installed before the trap and not after the trap , septic fumes could leak out. just stating some common sense. make better videos

@optics4062 9 месяцев назад

Drilling into a drain pipe and installing a saddle drain is wrong too. Saddle connections should never be used and no air gap? Terrible video.

@petermichaelw 5 месяцев назад

You are an alarmist and talking out of your hat. There is a one way valve in the unit, preventing any flow in the wrong direction. You are much more likely to have an air leakage from the p-trap joints than this 1/4" hole with a properly clamped saddle.

@diehardcat 2 года назад

On the side of the water tank near the bottom, there's something that looks like a valve and is covered by a blue cap. Do I need to do anything with it or just leave it as is? Thx!

@iSpringWaterSystems 2 года назад

Hi there. That is the air valve of the RO tank for you to measure and/or add the tank pressure. For detailed instructions, please refer to this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-a6Nc9wrnqAM.html. If you have more questions, please give us a call at 678-261-7611 (M-F, 8:30 - 5:30 EST). We are happy to help!

@garrysabino5139 3 года назад

I bought RCC7AK and installed it today. The filter casings and tubing produces moisture due to cold water from the well and this causes the water leak valve to closed. I have removed the water leak valve for now. Any suggestions?

@iSpringWaterSystems 3 года назад

Hi Garry. Please give us a call at 678-261-7611 (M-F, 8:30 - 5:30 EST). We'd love to help you after knowing more details.

@synthc1 3 года назад

I don't have enough space for the vertical filters under my sink. Can they be installed horizontally (laying flat)?

@iSpringWaterSystems 3 года назад

Hi there. Please give us a call at 678-261-7611 (M-F, 8:30 - 5:30 EST) to discuss this matter in detail. Thank you!

@treyadams6031 2 года назад

Do I still need pipe fitting tape while installing? If not, would it help anyways as an extra measure to prevent leaks?

@bgy1591 2 года назад

If something has a o-ring you don’t need tape. I believe everything on these kits have o-rings

@iSpringWaterSystems 2 года назад

Hi Trey. You don't need tapes for quick-connect fittings. If you need extra guidance for installation, please give us a call at 678-261-7611 (M-F, 8:30 - 5:30 EST). We are happy to help!

@sahl212 Год назад

I am on a city water 💧 and when I turn on the ultra violet the water goes funky teast. I called the company and they Saud because the city might use ozone to clean the water abd ozone react with ultra violet. Is this accurate?

@cplg2111usmc Год назад

Glad they got back to you... please let me know if you ever found out any answers to your question

@phillipg2418 2 года назад

Just installed the AK version. My water pressure to my sink faucet plummeted. Why would it effect my hot water? I am not sure of my kitchen water pressure but the outdoor hoses are 50-60psi.

@iSpringWaterSystems 2 года назад

Hi Phillip. This might be caused by airlock. You can find more information from the video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-msQ8vVo83rc.html

@vinny2555332 Год назад

So you install the drain before the trap ?

@lyusyaselman8845 2 года назад

After the filter installation, I drain x2 tank and occasionally hear water sound in the sink drain. Also, water in glass looks cloudy for a couple minutes and getting clear after. Is it permanent or temporary issue?

@iSpringWaterSystems 2 года назад

Hi Lyusya. Both issues should be temporary. If you have more questions, please feel free to contact us at 678-261-7611 (M-F, 8:30 - 5:30 EST). We are happy to help!

@Joneski4Jesus 2 года назад

I just replaced my filters and for some reason now there is a leak from my wastewater port, is this a common issue? Assuming just to replace it? Any other suggestions or insights?

@iSpringWaterSystems 2 года назад

Hi RJ. If it's the problem of constant drain, sometimes the tank needs to be re-pressurized after changing filters if the valve on tank was not closed. If the flow restrictor sprung a leak then you can remove it and soak it in some white vinegar for a while then blow it out. We can also replace it as a courtesy. Please give us a call at 678-261-7611 (M-F, 8:30 - 5:30 EST). We are always happy to help!

@kovalenkoihor4325 Год назад

Hi. What is the height and width of the white round pressure water tank? Can't google any information about it. Can't understand if I can squeeze it or not

@iSpringWaterSystems 11 месяцев назад

Hi there. The dimensions are LxWxH 11"x11"x14" For any questions or concerns, do not hesitate to contact us at support@123filter.com or at (678) 801-9308 M-F 8:30-5:30 EST// (678) 261-7611 M-F 8:30-5:30 EST

@tom-cz2jx 6 месяцев назад

Am i correct that the water that comes through the tap is filtered only through the first few stages below, whereas the drinking faucet goes through an extra couple of stages? What extra stages does the drinking faucet go through and what does it do?

@iSpringWaterSystems 6 месяцев назад

Hi there. The water that comes from the inlet water supply passes through all the different stages that the systems have before going to the faucet. Please, check this video to know how the systems work: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3VZRmOYJ8zw.html If you have any concerns or questions, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!

@peggywalshcraig659 5 месяцев назад

how much space overall is needed under the sink to install the system? Also, We have a chance to add an access door in the back of the sink base cabinet. Would that make filter maintenance quite a bit easier? Our sink is in an island counter. Thanks!

@iSpringWaterSystems 5 месяцев назад

Hi there. These are the dimensions of the RCC7 System: L15.5"x W5.125"x H17.5" Tank L11"x W11"x H14" The more space, the easier. If you have any concerns or questions, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!

@GerardoPedraza 2 года назад

9:09 the red hose is shown being connected to the membrane and also connected to the CTO filter. I think it should be connected to the sediment filter. And also not to the membrane. Can you confirm this?

@iSpringWaterSystems 2 года назад

Hi Gerry, prefilter water inlet and outlet are both red tubings. Prefilter outlet red tubing connects to the automatic shut-off valve (high-pressure side) and connects to the RO membrane water inlet. tubing color may vary on different systems. If you still have questions, please email us at support@123filter.com or call us at 678-261-7611 (M-F, 8:30 - 5:30 EST). We are happy to help!

@DjDyno401 2 года назад

At 5:11min RO MEMBRANE INSTALLATION . It is safe to install the RO with the label glue to the membrane?

@iSpringWaterSystems 2 года назад

Hi dyno. It's not an issue cause filtered water will go through the end opening of the membrane without touching the label. If you have other questions, please call us at 678-261-7611 (M-F, 8:30 - 5:30 EST). We are happy to help!

@haticeam9029 2 месяца назад

I installed RCC7AK. I didn't know about this new video so I did not instal leak dedection unit. Is it a must to have it. Can the system work without it. Also I did not flush the stage 1,2 and 3 filters as it was not in the old installation video but I believe they will be flushed once the storage tank is flushed. Lastly my main issue that I have, it has been 5 hours since the installation completion but there is continuous water coming out of black drain feed. How do I fix it? Thanks in advance.

@iSpringWaterSystems 2 месяца назад

Hi dear customer! Yes, the system can work without the leak detector alarm, however the leak detector is designed to detect and set alarm for possible leak and shut off water supply automatically to prevent flooding. Please, check the Leak Detector Alarm System with Automatic Shut-off Valve here: LS43: www.123filter.com/ac/index.php...mp;product_id=10031&acid=2 Check how to install it here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iJyZ144Hm5Q.html Regarding the pre-filters flush, we recommend performing the pre-filters wash every time you replace the filters to prevent carbon particles (if any) from passing to the membrane. For the continuous drain issue, please check the air tank pressure first. The air tank pressure should be 7-10 psi. Please, check this video to know how to pressurize your tank: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-a6Nc9wrnqAM.html If after pressurizing your tank the issue is not solved, please check the following video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-t4rPacnCKVo.html or kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST to properly guide you. We are happy to help!

@DOUBLE0SEVUN Год назад

I drained the prefilters with the RO membrane connected. Am I in trouble? Did I ruin my RO membrane?

@iSpringWaterSystems Год назад

Hi there. It should be ok if the RO membrane is new but we don't recommend making it a regular practice. The pre-filters have a lifespan of about 6-12 months, while the RO membrane can last 2-3 years. Flushing the pre-filters while the RO membrane is connected may cause any loose carbon particles from the pre-filters to get caught in the RO membrane, potentially reducing its lifespan.

@DKits73 Год назад

is after the P Trap the right spot to tap the drain tube in or should we put it before the P Trap to prevent sewer gasses entering into the tube.i would like to put mine after because of basement install just not sure if your Video is correct

@iSpringWaterSystems Год назад

Thank you for reaching out to us. For the drain tube of the RCC7, it is generally recommended to place it before the P trap to prevent sewer gases from entering into the tube. This is to ensure that the system works efficiently and to avoid any unpleasant odors. However, if placing the tube before the P trap is not feasible for your installation, placing it after the P trap should still work, but you may need to take extra precautions to prevent any odors from entering your home. If you have any further questions or concerns, please don't hesitate to reach out to us.

@DKits73 Год назад

@@iSpringWaterSystems Thanks for the reply I see now that this system has a auto flush flow valve with restrictor built in I believe so their should be no way for gasses to go back towards the membrane as the valve will be closed when water is not running also the drain tie in for saddle is higher than the drain point @ the membrane so water left in tube should act as a Ptrap

@willrobinson9575 Год назад

@@DKits73 Tomorrow im going to install my waste water drain after the P trap like you because i too am putting my system in the basement. I dont see any problem with sewer gas for the same reasons you mentioned. You are right, this video shows installing it after the P trap. Their earlier version of this video shows them putting it before the trap. In that installation they had a double bowl sink with 2 horizontal pipes. This video is a single so in order to install in a horizontal , they had to install it after the trap

@ryanspoopstang 2 года назад

how do i stop the "water hammer" everytime i use my sink, dishwasher, or shower? i get water hammer on the red tubing coming from the cold water supply line..

@iSpringWaterSystems 2 года назад

The incoming water pressure is probably too high. Please check the water pressure with a gauge from a hardware store and if it exceeds 70 psi then iSpring APR70 regulator (www.123filter.com/ac/index.php?rt=product/product&product_id=386) should be installed on the red waterline. If there are any other questions, please call us at 678-261-7611 (M-F, 8:30 - 5:30 EST). We are happy to help!

@ryanspoopstang 2 года назад

@@iSpringWaterSystems i measured the pressure before i even attempted install. It sits right around 65 psi.

@iSpringWaterSystems 2 года назад

@@ryanspoopstang If that's the case, please call us at 678-261-7611 (M-F, 8:30 - 5:30 EST). We will help you to solve the issue.

@ecovoycanada 4 месяца назад

Question: Under normal operating conditions, how much water is actually sent to the drain in this system? Let's say you plug the system in, open the inlet valve, let the system fill and don't use any water (like in a "away from home" scenario), how much water will actually be sent to the drain ? Water is not free in my area, I am trying to understand if this system drains a lot of water or if the drain hookup is just used to backwash the system every now and then. Thanks

@UserUser14880 4 месяца назад

I have everything installed except the black drain line. I ran that up into the sink to see how much water it puts out. And is about 1 gallon a minute. Something isnt right here. Why is so much water being wasted. I will comment back when i figure it out.

@iSpringWaterSystems 4 месяца назад

Dear customer, The RCC7 pure to waste water ratio is 1:3. Under normal operating conditions, 3 gallons should go to drain. Water should go to drain while the system is being used. Once the tank is full, water should not go to drain. If you have any questions, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) to properly help you. We are happy to help!

@matthewford7321 2 года назад

How do you disconnect the quick connect coupling from the faucet stem? We are moving and it’s a bear to get that off so we can take this wonderful filter with us. You guys should do an uninstall video

@iSpringWaterSystems 2 года назад

Hi Matthew. Please refer to this video for the quick connect removal. If you have any other questions, please give us a call at 678-261-7611 (M-F, 8:30 - 5:30 EST). We are happy to help!

@sk.1111 2 года назад

Hi, where can we get p-pulp? It wasn't included with the filters.

@iSpringWaterSystems 2 года назад

Hi there. They are available on our website: www.123filter.com/ac/index.php?rt=product/product&product_id=762. You can also contact our support team at 678-261-7611 (M-F, 8:30 - 5:30 EST) or email support@123filter.com for courtesy replacement.

@sk.1111 2 года назад

@@iSpringWaterSystems thank you

@ThatOneAltimaGuy 6 месяцев назад

The drain pipe under my kitchen sink is metal, it's not plastic like in the video, so how can I drill it? Is it safe to drill?

@iSpringWaterSystems 6 месяцев назад

Hi there. Please, kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) to properly guide you. We are happy to help!

@clanmacleod59 Год назад

Just installed my system, faucet leaks from the on/off valve, anyone had this issue?

@iSpringWaterSystems Год назад

Hi Ian. I'm very sorry that the faucet leaked. Please call us at (678) 261-7611 or (678) 261-7611 M-F 9-5 EST. We will make it right for you.

@leiflora8122 3 месяца назад

do I need to turn off water inlet to drain the tank？thanks

@iSpringWaterSystems 3 месяца назад

Hi dear customer! Yes, you need to turn it off to drain the tank. Please, turn off the feed water adapter, turn on the tank valve and turn on the RO faucet to drain the tank.

@charles1523 4 месяца назад

Does not need teflon tape for all threaded connections?

@iSpringWaterSystems 4 месяца назад

Hi dear customer! You only need to apply teflon tape on the threaded connections since the other connections are quick fittings. If you have any questions, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST, or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!

@user-iu3zz2xw2l 9 месяцев назад

I installed the system 7 months ago. I'm getting very slim water flow. Why?

@iSpringWaterSystems 9 месяцев назад

Hi there. Can you please tell me when was the last time that you replaced the filters? It might also be that the tank has lost pressure and it needs to be pressurized. The air tank pressure should be 7-10 psi. Please refer to this link to know how to pressurize your tank: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-a6Nc9wrnqAM.html For further concerns or questions, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST. We are happy to help!

@Carlos_Cerda_Moya 6 месяцев назад

I noticed that the leak stop valve does not have locking clips. Is not necessary? Thanks

@iSpringWaterSystems 6 месяцев назад

Hi there. Yes, they are needed to secure the tubings. You can find the locking clips in the spare bag that comes with the system. If you do not have them or if you have any questions or concerns, please, kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!

@Carlos_Cerda_Moya 6 месяцев назад

Ok, then it should be included in the video and the locking clips should be the same color as the valve like the others. Thankfully when I installed mine almost a year ago I came to that conclusion and I did that but yesterday when I istalled another one for my mom I didnt, I'll have to go back today to install those locking clips. Another fault is that there are no adapters for the European water inlet thread despite buying it on Amazon Spain. I have had to spend €17 to buy a replacement for the part... twice. Everything else is fine, that's why I recommended my mother install a system for herself. Thanks@@iSpringWaterSystems

@wc4572 Месяц назад

My house is very old and I have those metal drain pipes can I still install this?

@iSpringWaterSystems Месяц назад

Hi dear customer! Yes! There shouldn't be any problem. If you have any questions or concerns, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST to properly help you.

@markbethea9119 Год назад

Once I purchase this system,how much would it normally cost,on average, to have a professional to install this?? Better safe than sorry on my end.

@iSpringWaterSystems Год назад

Hi. Please call us at 678.824.8480 for more details. Usually it costs between $200 and $500.

@paulorosa2397 Год назад

Mine won't stop water coming out of the drain, does anyone know why?

@iSpringWaterSystems Год назад

Hi there! It might be that the tank is not full. Please, kindly check that the tank is full. It takes about 1-2 hours for the tank to fill. Another reason might be that your incoming water pressure is below 40 psi, so the tank cannot be fully filled to shut off the system. Please, kindly check that the incoming water pressure is at least 40 psi. If it is not, a pump should be added to increase the pressure through the system. If your incoming water pressure is 40 psi, it will be necessary to check the Automatic Shut off valve (AAS2) or Check valve. For further concerns or questions, do not hesitate to contact us at support@123filter.com and at (678) 801-9308 M-F 8:30-5:30 EST or (678) 261-7611 M-F 8:30-5:30 EST

@toyoduh20 Год назад

It would be nice if you disabled ads on your how to videos. If you have them somewhere else without ads please let us know.

@iSpringWaterSystems Год назад

Hi there. I apologize for this inconvenience but the ads cannot be disabled since it is a RU-vid feature.

@sjs12216 3 года назад

What can happen if water inlet pressure is below 45psi?

@iSpringWaterSystems 3 года назад

Hi Sean. If water pressure is below 45 psi the system is not as efficient. More water will go to drain. The RO membrane is very tight and higher pressure is required. RO system with pump is recommended.

@sjs12216 3 года назад

@@iSpringWaterSystems I have the RCC7AK-UV installed for almost 2 years. My well fluctuates between 30-50psi. I haven’t noticed an issue but do you recommend a certain pump to install on it?

@iSpringWaterSystems 3 года назад

@@sjs12216 If you like, we can upgrade the head unit for you for $100 which includes shipping. Please contact us directly by emailing support@123filter.com or calling our office at 678-261-7611 (M-F, 8:30 - 5:30 EST).

@Juan67_Az 3 года назад

@@iSpringWaterSystems you guys sell an upgrade I have the same set up.

@iSpringWaterSystems 3 года назад

@@Juan67_Az Hi Juan. Please contact us directly by emailing support@123filter.com or calling our office at 678-261-7611 (M-F, 8:30 - 5:30 EST) for the upgrade. Thank you!

@freddyjuarez5602 Год назад

Is this instructions also for iSpring RCC1UP-AK

@iSpringWaterSystems Год назад

Hi Freddy. For RO systems with a pump, please refer to this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pRu4wotwa2E.html

@amunkhufu 8 месяцев назад

Is this system BPA free? I'm planning to buy one.

@iSpringWaterSystems 8 месяцев назад

Hi there. Yes, the system is BPA free. Please, check the RCC7 system here: www.123filter.com/ac/index.php?rt=product/product&product_id=177&acid=2 For further concerns or questions, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!

@ynm078 2 года назад

I have a rcc7ak system been using for nearly 5 years, I recently changed all filters as filters were unavailable, ran into problem after replacing all filters I followed all step before starting it seems it's not filling tank and faucet leaking as water seems to be constantly on faucet it's leaking on the Hadlle of the faucet, I changed asov and waste flow still not working same problem

@iSpringWaterSystems 2 года назад

Hi there. Please give us a call at 678-261-7611 (M-F, 8:30 - 5:30 EST) and we will help to troubleshoot.

@abaizm 6 месяцев назад

el tubo de drenaje bota agua permanante que hago? quien me ayuda por favor?

@iSpringWaterSystems 6 месяцев назад

¡Hola! ¿Puedes verificar que el tanque esté completamente lleno? El tanque toma de 1-2 horas para llenarse completamente. ¿Sabes si la presión de tu fuente de agua es por lo menos 45 psi? Si la presión de tu fuente de agua es menos de 45 psi, necesitarías agregar una booster pump. Si ya chequeaste todo esto y el problema continúa, por favor contáctanos a support@123filter.com, a (678) 261-7611 M-F 8:30-5:30 EST o a (470) 560-0012 M-F 8:30-5:30 EST (Solo mensajes de texto) ¡Será un placer ayudarte!

@alexweber5087 5 месяцев назад

The middle gac is leaking how do I drain it??

@iSpringWaterSystems 5 месяцев назад

Hi there. Please, kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) to properly guide you as soon as possible.

@kovalenkoihor4325 Год назад

are those clips safe? It's water under pressure, you know...

@iSpringWaterSystems Год назад

Hi there. Yes, these are specifically designed to clump on the connectors strongly even under high pressures up to 70psi.

@jorgeliranzo984 Год назад

I have followed the steps to the letter a thousand times and I kept throwing water out the drain hose and it didn't stop

@iSpringWaterSystems Год назад

@lunadia2357 3 года назад

What is the lifespan of this product? How many liters of water can it produce before it needs to be change? Source of water is tap water.

@iSpringWaterSystems 3 года назад

Hi there! If the system is maintained, filters replaced and kept clean it can last up to 10 years. In hard water areas systems may require more maintenance. All parts are available on our website and inexpensive. The filters usually need to be replaced every 6-12 months. If you have more questions, please feel free to contact us at 678-261-7611 (M-F, 8:30 - 5:30 EST) or email us at support@123filter.com. We are happy to help.

@lunadia2357 3 года назад

@@iSpringWaterSystems how long before the filters have to be changed?

@iSpringWaterSystems 3 года назад

@@lunadia2357 Depending on your water quality and water usage, the RO membrane usually lasts 2-3 years. Other filters need to be replaced every 6-12 months.

@nintendad2099 3 года назад

You guys have the RO Membrane time wrong. It should be 4:58 😉

@iSpringWaterSystems 3 года назад

Corrected it. Thank you!

@dalewalker6397 10 месяцев назад

Why the drain pipe keep running

@iSpringWaterSystems 10 месяцев назад

Hi there. It might be that the tank is not full. Please, kindly check that the tank is full. It takes about 1-2 hours for the tank to fill. Another reason might be that your incoming water pressure is below 40 psi, so the tank cannot be fully filled to shut off the system. Please, kindly check that the incoming water pressure is at least 40 psi. If it is not, a pump should be added to increase the pressure through the system. If your incoming water pressure is 40 psi, it will be necessary to check the Automatic Shut off valve (AAS2) or Check valve. For further concerns or questions, do not hesitate to contact us at support@123filter.com or at (678) 801-9308 M-F 8:30-5:30 EST//(678) 261-7611 M-F 8:30-5:30 EST We are happy to help!

@bww2160 3 года назад

I'm gonna need everyone to repeat step 1 after me

@9001sem Год назад

what is the purpose of the storage tank?

@9001sem Год назад

can the system be used/installed without the storage tank?

@kazutosan Год назад

@@9001sem No, this system is not tankless. the purpose of the tank is to store the reverse osmosis water and provide pressure while you turn the RO faucet.

@iSpringWaterSystems 10 месяцев назад

Water is stored in a bladder, made of a material called butyl. When there is a demand for water, the water is pushed out of the tank's bladder by air pressure. As water is forced into the tank by the operation of the RO unit, pressure inside the tank increases. In other words, it will help you to store water and increase the pressure in the system. If you have any concerns or questions, please contact us at support@123filter.com or at (678) 801-9308 M-F 8:30-5:30 EST//(678) 261-7611 M-F 8:30-5:30 EST We are happy to help!

@robertchou9758 2 года назад

you drill hole in the wrong spot!!!! ,please N.A.

@GunsAndFishingU.S.A. 2 дня назад

Why is the water adapter plastic?

@iSpringWaterSystems День назад

Hi there! It is made of high-quality, BPA-free plastic. We carefully select materials that meet strict quality standards to ensure reliable and safe performance. At iSpring, we leverage the expertise of skilled engineers, production specialists, and advanced manufacturing technology to provide dependable, top-notch products. If you have any concerns or questions about our products, please contact us at support@123filter.com or at 678-261-7611 M-F 8:30-5:30 EST

@GunsAndFishingU.S.A. День назад

@@iSpringWaterSystems ok ty

@amosgjoni 8 месяцев назад

Why the western water always run how we should be

@iSpringWaterSystems 8 месяцев назад

Hi there. Can you please contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) to properly guide you? We are happy to help!

@manias658 2 года назад

Rate how much

@manias658 2 года назад

@iSpringWaterSystems 2 года назад

@@manias658 Our RCC7 series can produce up to 75 gallons of water per day. If you need a system with other rates, please check out here: www.123filter.com/ac/reverse-osmosis-water-filter-system.

@charliethomas5830 8 месяцев назад

2 min 30 sec says to cut the red tube to fit. STOP....RESEARCH GO TO 8MIN and 10 sec. install stop leak valve before cutting red tube. there is also a bracket for installing the faucet onto a wall. There is no mention of this bracket. There is no mention of how high to mount the filters. I found 2 to 3 inch gap under the filter will allow filter removal.

@iSpringWaterSystems 8 месяцев назад

Hi there. Thanks for your feedback! For any concerns or questions, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST We are happy to help!

@danquattro6662 Месяц назад

Needs to be Slower and have more real video instillation footage ..would have been nice

@iSpringWaterSystems Месяц назад

Hi dear customer! We extend our sincere apologies for any inconvenience, and we genuinely appreciate your valuable feedback as it assists us in enhancing our services. If you have any concerns or questions, please kindly contact us at support@123filter.com, at (678) 261-7611 M-F 8:30-5:30 EST or at (470) 560-0012 M-F 8:30-5:30 EST (Messaging only) We are happy to help!

@chrislim6104 3 года назад

Please correct your instructions. At ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yEvLqKiPa5k.html, you instruct to cut the red tubing, then, for the leak stop valve, at ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yEvLqKiPa5k.html, you tell us to cut the red tubing again. If the red tubing is cut too short the first time, there's not enough tubing to install the leak stop valve.

@iSpringWaterSystems 3 года назад

Hi Chris, thanks for the comment. We recommend leaving enough tubing length for future maintenance before cutting them(for under-sink setting). Therefore, you should have enough tubing length for installing the leak stop valve after filter prewash. Thanks again!

@george5120 9 месяцев назад

Get rid of the damn music. We are trying to learn how to install the water purifier, and the music is an unnecessary distraction.

@iSpringWaterSystems 9 месяцев назад

Hi there. Thanks for your feedback! For any concerns or questions, please kindly contact us at support@123filter.com or at (678) 261-7611 M-F 8:30-5:30 EST. We are happy to help!