JAAAAAAAAAAG

Подписаться 567 тыс.

Просмотров 38 тыс.

50% 1

The JAAAAAG Project takes a turn for...??
*********************************
Vote for us here: www.onxmaps.co...
Like this video? Check out these:
onX JAG Build Part 1 - Offroad Meets Luxury: • Our Next Build is Offr...
*onX JAG Build Part 2 - JAAAAAG: • JAAAAAAAAAAG
onX JAG Build Part 3 - Calling Out My HATERS: • Calling Out All 1st Ge...
onX JAG Build Part 4 - Cutting up the Truck: • There's No Turning Bac...
onX JAG Build Part 5 - Dodge Dominates Rock Crawling: • Old School Power: STOC...
onX JAG Build Part 6 - 1st Gen Dodge No More: • 1st Gen Dodge No More...
onX JAG Build Part 7 - I Cut Into the Gas Tank: • Things get SPICY with ...
onX JAG Build Part 8 - What Will $6500 Buy Ya: • What Will $6,500 Buy Ya?
onX JAG Build Part 9 - Ian Visits the BleepinJeep HQ for OnX: • @bleepinjeep's Wild Ja...
onX JAG Build Part 10 - Jag on Dodge: • Building Our Jaguar Mo...
onX JAG Build Part 11 - How To Set Up Leaf Springs: • Why Leaf Springs Suck ...
onX JAG Build Part 12 - Make Your Own Engine and Transmission Mounts: • Make Your Own Engine a...
*********************************
Get 20% OFF ONX GPS Maps: Enter code “bleepinjeep20” at checkout
Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout
Get 10% OFF PowerTank: Enter Code "Bleepin PT" at checkout
Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout
Get 10% OFF Iron Rock Off Road: Enter Code "bleepinjeep" at checkout
Get 10% OFF Bullet Point Mounting Solutions: Enter Code "bleepinjeep" at checkout
Get 10% OFF EZ Flate: Enter Code "BLEEPINJEEP" at checkout
Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout
See all BleepinJeep Discount Codes at: bleepinjeep.co...
*********************************
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on RU-vid: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep...
• Or Just leaving a kind comment on FB here: / bleepinjeep
*********************************
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 247

@ThePioneerSpirit 5 месяцев назад

The best part about all this: it's still "an XJ with a straight 6."

@bleepinjeep 5 месяцев назад

That's what we were going for! 😂

@RedRabbit4230 5 месяцев назад

Now THAT'S WHAT YA CALL KEEPING THE JEEP SPIRIT!!!!

@MattsOffRoadRecovery 5 месяцев назад

That’s the exact truck the axles in the Morrvair came from.

@bleepinjeep 5 месяцев назад

OMG, according to the commenters here we should both be banished for "destroying" a 1st gen 😂

@grisby6484 4 месяца назад

You both should receive medals for making silk purses out of a sowes ears @@bleepinjeep

@billjcanada 5 месяцев назад

I love the old Dodge trucks. They were were bullet proof. Brings a tear to my eye that you are taking it apart

@bullittdog4352 5 месяцев назад

He using everything but the cab..basically the same truck with an ugly euro crap car body.

@Desertquartz79 5 месяцев назад

You should have bought all Ole dodge trucks in the world and restored them to factory condition. Then bought 100,000 sq. Foot climate controlled warehouse to store them. 👍

@coltonupchurch4368 5 месяцев назад

Me buddy

@TheOnlyBlackInMeWasWillieBrown 4 месяца назад

😂😂😂 no, they weren't kidso. You clearly know nothing about dodge fan boy.

@TheOnlyBlackInMeWasWillieBrown 4 месяца назад

@@bullittdog4352its an improv6ove the ahit box dodge cab

@jackc6299 5 месяцев назад

My personal preference: it would be more interesting to see you slap some axles under the Jag. Plus, I doubt very much that the Cummins will fit under the hood, body swap or not. I understand it will be much easier to do the body swap, and this year looks to be a competition of body swaps. Welcome to OnX Body Swap Competition!

@Questionable_creations 5 месяцев назад

Maybe he's not putting a hood on it

@bleepinjeep 5 месяцев назад

Pretty sure we already blew the Jag motor just in the first competition... they werent known for reliability!

@tacticalhandyman710 5 месяцев назад

Josh is gonna get rid of his Ford now that he has experienced the awesomeness of the cummins.

@doughaven-rf8id 4 месяца назад

That's going to be one Jagged Ram !

@vinceimp9581 5 месяцев назад

16:32 should have had a flash back to the glove box full of u joints 😂

@bleepinjeep 5 месяцев назад

so many U-joints!

@grisby6484 4 месяца назад

Just dump a couple leafs from those springs, it will soften the ride and give you more flex. Just add a top link to help with preventing axle wrap.🤔

@Psyco913 4 месяца назад

Dodge + Jag = Dag. Reminds me of Brad Pitt's character in Snatch. D'ya like dags?

@George71964 5 месяцев назад

There were some really nice drone shots in this video. Thanks for sharing.

@jameslund221 5 месяцев назад

I noticed that too 👍🏻

@hesserdude07 5 месяцев назад

I love the dig... 😂

@jonmcfarmer6954 5 месяцев назад

It is not a "Jagguwire"! It is a "Jag-you-are. 👍

@aedanhudson1825 5 месяцев назад

Yea the lift for those trucks are supposed to have shims to angle the front drive shaft up.

@jgdcontent 4 месяца назад

Haters gonna hate. Make em cry and put that cab on a powerstroke boom content for daysss

@jonas852 3 месяца назад

love the jaguar xj. Think they are one of the best looking cars. they just got evryting right.

@jasonkelly9373 5 месяцев назад

Now that's a real Dodge truck

@wadethomas6952 5 месяцев назад

trucks I would put some metal spacers on the frame to lift the body in or you can match the height of the bed after you cut off the trunk

@zacmurch7675 5 месяцев назад

I am voting for you everyday. love this idea you have. you got to put it up against the Morrvair for a test run.

@bleepinjeep 5 месяцев назад

Challenge accepted @mattsoffroadrecovery

@brianward3944 5 месяцев назад

Jag+ram= Jaam, Jag+Dodge= judge, Here cumins da judge, Dodge Jam.

@intentsmodz 5 месяцев назад

I can't imagine someone taking a British car and putting it on an American truck chassis. LMAO

@rickalex3490 5 месяцев назад

Just purchased a shirt. Thanks for recognizing us with a lot of xx in our shirt size.

@bleepinjeep 5 месяцев назад

lol, we have up to 5X in most sizes

@galeng73 5 месяцев назад

Long time subscriber, seldom commenter. It won't make sense to most people, but it makes sense to smash the shit out of this thing to see what breaks and needs to be improved before you compete in anything. Also, this thing in 2WD is pretty damned capabable.

@bleepinjeep 5 месяцев назад

I was surprised what it could do offroad although the suspension comfort could be turned up a notch!

@jamesbigham9036 5 месяцев назад

I am definitely looking forward to seeing this unique build it will definitely be one of a kind for sure

@db11BOA 5 месяцев назад

I am not gonna lie I am looking forward to seeing what the Jag/Dodge is going to look like. I have seem some pretty crazy builds when I was in the Army, the craziest was an El Camino on a 7" long arm lift while stationed in Fort Benning, Ga. I believe he rolled around on 40's.

@bleepinjeep 5 месяцев назад

An El camino would be sweet too

@normanpatane2417 5 месяцев назад

You have my vote this time. Everyone involved seems to be working on everything Except there build for ONX. I voted for you guys last year because Colt did such a great job documenting the build. I love your builds. I guess fame takes a toll dragging you all over the place. I can't wait to see what you guys do. You and Josh make a great team and I enjoy seeing what you guys do.

@bleepinjeep 5 месяцев назад

I'm sure everyone will get to it when they can

@jeepsandjalopies 5 месяцев назад

Power Jag’n

@susansmith-franks684 5 месяцев назад

Entertainment value cranked up to 11! 🤣❤️

@SudoSamurai 5 месяцев назад

Jag-wire trips me up every time 😅

@bleepinjeep 5 месяцев назад

should I go full British Accent everytime I say Jag-u-ARE

@SudoSamurai 4 месяца назад

@@bleepinjeep yes, yes you should 😎

@coachgeo 5 месяцев назад

soooo its going to be a Daguar .... . sounds fun

@TOPMNM 5 месяцев назад

Keep it on small tiers. Small and nimble 👍. The black horse of the competition

@taurota1554 4 месяца назад

Outstanding content as always

@ShootingNStuffFamilyFun 5 месяцев назад

“You like daggs?” Brad Pitt. Lock, Stock, and Two Smoking Barrels! That's a Dagg!!!

@Sakratic 5 месяцев назад

I understand and appreciate the logic you had for going with this particular build! Definitely looking forward to seeing the "finished" product - asterisk is only there because with the build technically being compromised from the very beginning, with all the budget restrictions LOL and when is a build actually ever finished AND so will be hoping that after the contest, regardless of where you finished, that you guys decide to really finish the build, free of any limitations so that all of us get to see its ultimate final form! For me, right now, you're definitely tied with two other teams when it comes to the team I'm most excited in seeing how well your envisioned concept, translates to tackling the actual competition, which does take place in the real world!! BTW your "RAMpinJAG" build already seems like it will be supremely epic, memorable one (for some reason I'm super confident in that 😁👍) - I'd actually be shocked if that wasn't the case!

@bleepinjeep 5 месяцев назад

I dont know when one of our builds has NOT been EPIC!

@ronizard1674 5 месяцев назад

The Ram Jag.

@samwalker1304 5 месяцев назад

Ifin it’s ruff now just think about when you lighten it up!!! May just need a main leaf and the bottom leaf only😂

@SevenToes 5 месяцев назад

They mentioned incorporating the flat bed so it won't be super light, especially if the challenge like last year on a week long treck with many supplies

@Derf1313 4 месяца назад

Not sure, but those Selectro look just like my Husky on my 73 K30... They're made by Mile Marker, & parts might still be available. They certainly have been put thru the hard life with me, 9300# & 375+ hp 355 (350-.30 over with 11-1 comp!). But I'm not rock crawling here in Michigan, but they have lasted 3+ decades...

@BoydLakeMaine 5 месяцев назад

Every time he says "Jaguire" I wince. Must be a southern thing?

@jamesmcgilvray7031 5 месяцев назад

Yalll should name it the JAGgernaut

@Skiridr22 5 месяцев назад

Use your original Cherokee Matt, the black one 😊

@robertbecco469 5 месяцев назад

Make sure to fill that getrag all the way to the topwith transmission fluid threw the shifter hole! It will add longevity to the trans, ask me how i know lol

@cameronhoover7561 5 месяцев назад

This is going to be fun when I see the post with the 1st gen on fb I already figured this is what you were going to do 👌👌

@jarroddraper5140 5 месяцев назад

A idea you could try the coyote iner tube beed lock system m8ght be cheeper then the rims

@mudlovr 5 месяцев назад

The factory cv has stoppers can gain a bit of down travel on dri e shaft by grinding out the stoppers

@DieselArcher 5 месяцев назад

It’s a 89 or 90, 91 had the larger more rounded grille. Fun fact, Mr ford (Jack Roush) installed the first Cummins in a dodge for the Chrysler engineers.

@bleepinjeep 5 месяцев назад

interesting fact!

@pattkinder612 5 месяцев назад

This is going to be a beast!

@allanstipe2829 5 месяцев назад

When I was a kid growing up in a small farming town these dodge trucks were everywhere. I never imagined they would end up being the desirable rigs they have become.

@bleepinjeep 5 месяцев назад

heck just 7 years ago they were still worthless

@allanstipe2829 5 месяцев назад

@@bleepinjeep dirt every day did an episode 3 or 4 years ago where they drove one into a pond.

@bleepinjeep 5 месяцев назад

@@allanstipe2829 I remember that, speaking of driving into ponds, about 10 years ago I did one that said "Your Jeep is NOT a submarine!" apparently they didnt listen

@aaronscott2278 5 месяцев назад

Wow killer video guys much love and respect 🙏

@PONO-go3ee 5 месяцев назад

Ok a ZjaaaagRAM , LETS SEE

@RobertDean-o7e 5 месяцев назад

As soon as you said your doing that to a beautiful dodge I had a chest pain

@itsm00t17 4 месяца назад

Mmmm love me some old school 12v vibes✊

@toddhoffmaster6057 5 месяцев назад

The Dodguar is going to need a lot of finessing to work.

@Boardr721 5 месяцев назад

Hey, make sure you address the steering box and bracket. I had a 1993 and the bracket tore off the frame. I wasn’t even doing anything, just backing out of the driveway when it happened, so it must have been fatiguing for a long time. It had more than 250k miles on it. This will be a fun build. Good luck!

@GrumpysGarageDave 3 месяца назад

The british union jack + a power wagon = the Jack Wagon

@bleepinjeep 3 месяца назад

Lol, I like it!

@GrumpysGarageDave 3 месяца назад

@@bleepinjeep me too .. if it were mine that would be it's name fer sure 😁

@joshuacook1977 5 месяцев назад

All it the JAM! JAG/RAM

@holycarmods66 5 месяцев назад

I hope you guys put stacks on the jaguar. It would look pretty cool

@bleepinjeep 5 месяцев назад

ohh for sure, what Dodge Jag would be complete without stacks?

@ghadyzaidan8119 5 месяцев назад

This should be called 10:26 JODGE

@notinside1 5 месяцев назад

I had a 90 dodge 150. I had to change the rear u joint about every 6 months

@holderoftheshares1257 5 месяцев назад

Good morning, Matt an family.

@delinquentdesign 5 месяцев назад

So its a jag and a ram? 🤔 Its a JAM!!!!!

@delinquentdesign 5 месяцев назад

And yes it Jams!

@Yamahadipper8 5 месяцев назад

You can buy caster shims and use them to move the pinion angle up. Not gonna be as nice to drive on the highway with less caster tho

@bleepinjeep 5 месяцев назад

could always cut the C's off and reweld them

@Yamahadipper8 5 месяцев назад

@@bleepinjeep don't know why I didn't think of that. Great idea!

@ccovemaker 5 месяцев назад

The RU-vidr special: a practical base vehicle with an absurd body swap for clicks.

@rippleeffect3910 5 месяцев назад

Awesome plan Matt! This is my favorite build of the competition so far. But please, never say 12v Dodge Cummins. It's a Cummins that is stuck in a Dodge. I love my Ram more than anything I own. But Dodge never made anything as good as a 12v. We got lucky they made such a good choice.

@bleepinjeep 5 месяцев назад

ok so, "12V Cummins stuck in a Dodge" - I'll try to remember that one!

@joshuaperry6828 5 месяцев назад

Just following the crowd.

@4wdtennessee459 5 месяцев назад

Yay something good to watch

@nathanwoten6236 5 месяцев назад

I think you need to 4 link the truck front and rear with ORIs or coil overs. (Or 3 link the front what ever works out) I don't think you will get as much flex as your going to need / want with a set of leaf springs made for a Cummins. Unless yall order a set of custom springs or make a set from something else work. But you have a lot of weight to deal with. If it is in your budget I'd say definitely link it with ORIs or coil overs. Even if you just do the front I think that would Completely change the rig for the better

@bleepinjeep 5 месяцев назад

Coil overs maybe, ORI's would break the bank REAL quick!

@chrisgray8404 5 месяцев назад

Dodge jag baby would be a real funny name for it.

@bleepinjeep 5 месяцев назад

kinda digging it!

@HardcountsAdventures 5 месяцев назад

Can’t wait to see how your going to make things work… you can call it Frankenjag? 🤣🤣😳

@RedRabbit4230 5 месяцев назад

Hey. I don't know how far behind your posting i am but, in order to have more car and less bed, cut bed in half an keep the 2 original boxes IF U NEED the other 2, weld them, face up in the bed also a spare yire holder or 2 as well....

@lifelinefabllc 5 месяцев назад

The barely steer right is because of the lift without adjustable draglink. I assume crossover steering is in its future anyways, but if you are using the factory steering box mount you will 100 percent tear it off the frame eventually. Nobody makes a reinforcement for that year so you will have to build it. It is not a fun thing to build. I had the great misfortune of maintaining two of those trucks that were used for pulling goosenecks in a very rough offroad construction job. The steering box mount was pretty much the first thing to usually go. Change the alternator setup while you are at it. The external regulator alternator setups on those were an issue. I think Hagemeister Inc in Lebanon, Oregon is building a bolt in internal regulated alternator setup for those. I am sure other companies make them also. I assume you have already figured out that you need to switch the front driveline to a 1350 cardan. Other than that the body is the biggest issue with them but you are getting rid of that issue already. It should be a fun build either way.

@bleepinjeep 5 месяцев назад

gonna be an epic build for sure, thanks!

@danieldaugherty204 5 месяцев назад

My dream truck is 1990 12 valve Dodge!

@timothymorrison2286 5 месяцев назад

You couldn’t have bought a better kidney buster

@freeidaho-videos 5 месяцев назад

We found the weak link..... yeah, the decision making process ;)

@darrinrebagliati5365 5 месяцев назад

As much as I'd like to vote: 1) I want to vote for all of you. 2) my email is already plugged from other things I needed an account to enter/vote/etc. 3) I still want don't know who to vote for and want to bote for everyone! So I will just watch and support all of you thru YT.

@normanpatane2417 5 месяцев назад

I like the name Miss Daisy

@carry45calsw 5 месяцев назад

Should call it the jagginwagin

@kstricl 5 месяцев назад

If I remember correctly from a friend that bought a 1st Gen Cummins new, the difference between the 250 and the 350 was... Springs and the door label. Pulling some leafs out of the pack should help, but then, I don't need to tell y'all that.

@RedRabbit4230 5 месяцев назад

When I was younger I had a 78 DODGE TRUCK. I ALWAYS THOUGHT. DODGE STOOD FOR D= DARNED O= OLE D= DODGE G= GOES E=EVERYWHERE AND IT DID TILL THE CHAIN AND SPROCKET TRANSFERCASE DECIDED NOT TO WORK PROPERLY. AT which point all I had left was 2 WD.

@gonzalez7805 5 месяцев назад

Not a fan of incorporating the truck bed , but its your build..

@bleepinjeep 5 месяцев назад

Vote for team BleepinJeep: www.onxmaps.com/offroad/app/build-challenge#build-vote

@jameslund221 5 месяцев назад

Like I said I did, but you’ve got a long way before catching Robbie 😢

@johngreene920 5 месяцев назад

It's NOT a Jag- Wire , c'mon get it right it's Jag-war 😂

@4wdtennessee459 5 месяцев назад

I love the 80s square body dodges. I’m sad y’all putting jag on dodge.

@DeepSouthBuilder 5 месяцев назад

I predict that everyone will dodge giving a crap about your opinion.

@BlackAndBlueGarage 5 месяцев назад

I figured this is wat you meant yesterday 😜

@DaleA-md2eo 5 месяцев назад

It's going to be junk with out lockers solid 4wheeldrive unit

@ryankobilansky2500 5 месяцев назад

Voting site isn't that mobile friendly. Tried to vote for you guys about 6 times before I realized I have to scroll back up to get to the sign in info. Whereas you're a lot closer when you click vote for the other teams. Maybe part of the reason you guys are behind! Will be a sweet build.