Jeep JK O2 Sensor Replacement, Bank 1 Sensor 2

Подписаться 25 тыс.

Просмотров 23 тыс.

50% 1

In this video, I replace the O2 Sensor in my 2014 Jeep Wrangler Sahara, with the 3.6 Pentastart Engine. This is the Bank 1 Sensor 2, located on the passenger side, downstream.
Its not too difficult, if you remove the inner fender, but be aware you will need the following parts/tools to complete the job:
Jeep Fender Clips
amzn.to/3Q9OAZN
Jeep O2 Sensor Socket
amzn.to/3ScrgwZ

Хобби

Опубликовано:

23 окт 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@wadecarrington2995 Месяц назад

Glad I watched this... Just figured I'd never get my breaker bar in there, but gave it a try after yours fit. I had lubed old sensor overnight & it popped right out. No codes ~ reader says ready for inspection :)

@CliffsHowTo Месяц назад

Awesome!

@MarvinWafflehouse91 4 месяца назад

Thanks for the video and link to the socket …just ordered the socket and replacing mine this weekend 👍🏼

@nategamage9310 7 месяцев назад

Good video I liked it. I would suggest getting a flex head ratchet. Probably one of the best purchases I’ve made.

@CliffsHowTo 7 месяцев назад

What I did worked also, but yes, that may not be a bad idea!

@T-R3kz 6 месяцев назад

I too, had issues removing oxygen sensors from bank 2 using a breaker bar. I went ahead and purchased a flex head ratchet at harbor freight freight. I have to say, it made my job easier. Great video my friend.

@needer123 8 месяцев назад

I have a 2016 Jeep Wrangler Sahara with the code P0157 which probably means Bank 2 Sensor 2 needs to be replaced. I'm assuming it's done the same way in this video but just on the driver's side. Thanks for posting this video as it helps me see what I'd have to do to replace my sensor.

@jayvee962 4 месяца назад

I have the same issue. Do you remember what part # you ordered. Does it have to be OEM?

@needer123 4 месяца назад

@@jayvee962 I got an Oxygen Sensor from AutoZone. It was an NTK brand. I forget the part number. I think it's the same brand the factory uses. You can tell which one it is by opening the hood and seeing which colored connector goes to the rear sensor. I think it was a black connector.

@needer123 4 месяца назад

@@jayvee962 I think it was part number 23161. The one with the longer cable and black connector. I bought both sensors and returned the one I didn't use. I replaced it in January and the code went away. No problems since.