Jeep Parts Out… Toyota Parts In

Подписаться 1,7 млн

Просмотров 1 млн

50% 1

So I got a project to rebuild the banana. Today we're pulling the engine and looking at a future project.
Matt’s Off Road Recovery Tumbler Cup
mattsoffroadrecovery.com/coll...
Subscribe / @mattsoffroadrecovery
Off Road Recovery Videos
You Took Your Tacoma Where?! (Sale Flats Rescue)
• Oh No! You Drove A Tac...
Chevy HD Super Stuck, Can The Morrvair Do It Alone?
• Chevy HD Super Stuck, ...
Ripping Apart The Banana, It Will Never Look The Same!
• Ripping Apart The Bana...
We Build & Test The New Suspension For The Banana
• We Build & Test The Ne...
$100,000 Jeep Breaks On The Trail
• $100,000 Jeep Breaks O...
Big Bus Buried To The Frame - Morrvair & Winch Truck
• Big Bus Buried To The ...
Matt's Off Road shirts, hats, hoodies, keychains and stickers!
www.mattsoffroadrecovery.com
Matt’s rope of choice 30
Matt's Recovery Rope by Yankum Ropes
www.mattsrecoveryrope.com/
Jeep Cherokee XJ bags, we use ours for first aid.
www.amazon.com/gp/product/B07...
Shop tools!
Milwaukee 2767-22 Fuel High Torque 1/2" Impact Wrench w/ Friction Ring Kit
amzn.to/2qAiRbY
Tires on yellow banana!
Milestar Patagonia M/T Mud-Terrain Radial Tire - 35X12.50R15 113Q
amzn.to/2O8Yafx
Follow us on Facebook!
/ winder-towing-inc-1029...
Follow us on Instagram!
tinyurl.com/y6pkp3mg
Jeep walk around video
• Walk around my XJ
Please like, subscribe, and share!
Thanks for watching, from all of us at Matt's off-road recovery!

Авто/Мото

Опубликовано:

17 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,9 тыс.

@danhambrick6331 3 года назад

I didn't find the video of the Dyno run on Golen's channel....

@michaelvangundy226 3 года назад

So it has way less power than an old stock Chevy v8. Longer, and weighs just as much. Should have just grabbed a 10 year old chevy truck. Get a good tranny and transfer case with it.

@klarakennedy4324 3 года назад

@@michaelvangundy226 you’d be surprised how down on power a clapped out engine makes. Easy to say when you’re doing exactly 0% of the work

@Benson_aka_devils_advocate_88 3 года назад

@@michaelvangundy226 Or he can build a recovery vehicle that works for what he does.

@nosebergs-are-at-it-again 3 года назад

@@michaelvangundy226 a stroked 4.0 is direct fit, headache free. no gremlins or bugs to figure out, no conversion bullshit to deal with, no fabrication, no need for aftermarket engine control or having a wiring rats nest under the hood, etc.

@patrickweaver1105 3 года назад

@@michaelvangundy226 Jeep 4.0 engines are legendary for endurance and the low rpm performance necessary for rock crawling. Stroking the engine moved the torque curve further down where you need it while increasing fuel efficiency and horsepower at highway speeds. A V-8 is shorter but it's also wider and makes for a cramped engine bay. It's all about which trade offs you want to make.

@jkherberger 3 года назад

Matt, when you talked about using the wrecker to pull the engine out, you should have had Ed say "we'll get it out".

@bruceleealmighty 3 года назад

Stock footage edit ha ha

@thatsgottahurt 3 года назад

LMAO, that would have been gold, I laughed so hard at this.

@0714will 3 года назад

😆

@chuckstith838 3 года назад

With a weather report and stating it's over dirt

@turboponies 3 года назад

@@chuckstith838 Slight precipitation and seepage in the past, extra muddy on the road now.

@lonniedickerson1447 3 года назад

Matt don't sell yourself short you're not cheap and lazy. You're frugal and you like to work smarter not harder 😉 . All you and your teams Fabrication work that I've seen looks and functions perfectly for everything you guys have built. I'm a little bit of a fabricater myself and I'd love to have half your talent! Keep up the good work I learn something new every time I watch 1 of your videos and it's very much appreciated 👍 stay safe

@61rampy65 3 года назад

I'm so glad everyone in the comment section knows so much more about what Matt wants/needs than Matt does. And so many comments from people who didn't even watch the video before commenting, or haven't watched previous vids. You would think Matt is on his first day doing off-road recoveries. Just do what you have been doing, Matt!

@coldblue9mm 3 года назад

61 Rampy And if the truth was to be known, most of these arm chair experts spewing advice don't know jack squat about what any of this stuff.

@Bonnie_Blue389 2 года назад

Most of theses phone holder do is change a tire, if they even know what a tire is. Much less then a lug nut.. 🤣

@williammoore6858 2 года назад

That is everyone at every job...including him

@williammoore6858 2 года назад

It's called learning

@tacosam6291 2 года назад

I think this channel is an insperation.

@boxerfortyfour1153 3 года назад

The old engine needs to be put in a place of honor for all the rescues it's performed. When I was a kid we didn't have an engine hoist either. We just used a block and tackle from the branch of an old oak tree.

@Grandamse1 3 года назад

Exactly what I'm doing with my ZR2 blazer.

@simplyamazing880 2 года назад

This is really a testimony to the quality of these 4.0 engines. That engine has been revved till it floats over and over as a matter of the normal work environment yet it takes it and comes back for more. They are a real work horse.

@oldmanjohnson69 2 года назад

We used a pecan tree to hold our chain hoist. It worked for a 350

@ChasOnErie 2 года назад

YUP YUP YUP .. 1 inch Manila rope !!!

@Pat.Mustard 2 года назад

We used to strip the engine in the car. Then you could just lift the bare block out.

@austinforst3055 3 года назад

You always say, "Thanks for watching", well.. thank you for posting. I watch all of them, that's going to be my line now. "Thanks for posting" count on that

@CTXSLPR 3 года назад

Not only are y’all gettting more comfortable on camera and you’re editing getting vastly better; you’re getting so much better at engagement with the audience. Like how you’re “stringing us along” with the journey with what we have to look forward to.

@marnaehrech1223 3 года назад

Agreed! Matt's opening up a little. What I love most about the channel, besides the ingenuity of their mechanical exploits, is the relationships and camaraderie between all the folks. Just lovely to behold!

@guachingman 2 года назад

Matt the natural lol

@donbearden1953 3 года назад

I love the engine hoist especially because it doubles as a wrecker/tow truck!

@ericp.9497 3 года назад

“I don’t have an engine hoist.” No, you don’t. You have the mother of all engine hoists.

@greasycreekoutfitters5163 3 года назад

Eric P., thank you...LOL I came to make sure someone pointed that out! Wish I had an engine hoist like that!

@kevinbennett2565 2 года назад

It definitely probably wont tip too

@bedlamite42 2 года назад

self propelled diesel engine hoist

@rickybailey7123 2 года назад

DAM the adjustment bar that hooks in the middle of the engine!! He has a hydro cable for front and another for rear best 1 ever the hell with a engine lift !!

@Dixler683 2 года назад

No engine hoist, only a fork truck.

@EvilTribble1 3 года назад

If you cake on enough dust any 4.0 will not drip :)

@JeepTrailsandBarbells 3 года назад

Thats how i keep mine from dripping, i call it my "stop leak" 🤣🤣

@bruceleealmighty 3 года назад

That was my thought process, but wasn't sure it was common.

@lordTowle 3 года назад

The only place my 4.0 "leaked" was from the oil filter adapter. Then I replaced the seals on the adapter, it was fine.

@ericnewberry 3 года назад

@@lordTowle mine was the rear of the valve cover gasket. Then the next week the oil filter adapter housing lol. Now it just burns it not leaking it 😂😂😂

@lordTowle 3 года назад

@@ericnewberry BTW - That was with 250k miles on it. Those motors last.

@HickSquatch 3 года назад

Seriously, the BEST engine hoist I’ve seen!!! Fully adjustable, way heavy duty, won’t tip over and doesn’t get hung up on pebbles and cracks in the concrete! Great hoist!!! Looking forward to watching the stroker at work!!! Golen is supposed to be THE best!

@hgj2019 3 года назад

AND, his hoist doubles as a wrecker! 😎

@guardrailbiter 3 года назад

But it lacks the adrenaline rush of wondering if that cheap hoist from Harbor Freight will collapse at the worst moment. :-(

@hgj2019 3 года назад

@@guardrailbiter right!😆

@jordan0338 3 года назад

Is lizzy your gf?

@nativeloup 3 года назад

No! Lizzy’s dad and Matt are lifelong friends. Matt is married!

@samarah63 Год назад

That new radiator makes the jeep look more Jeepy. Awesomeness 🤗

@jeremyspecce 3 года назад

For a short time I worked at my friend’s shop where he built custom cars. I did not appreciate the style of the cars, in general, but I loved working there. While I hated the idea of a Mitsubishi Montero that would lay its rocker panels on the ground, I LOVED fabricating the air suspension mountsand figure out the shock mounts and cutting and reinforcing the frame. It’s a real exercise in troubleshooting and creativity and seat of the pant engineering. I feel like I’m reliving it watching these build videos. ❤️

@joevk6274 3 года назад

"It never drips" Well yeah, all that dirt and sand on the engine acts like oil dry and absorbs the oil before it can hit the ground.

@blacksheep25251 3 года назад

I call BS on that.. I'm a Jeep addict (owned over 14 various Jeeps from 1950 to 2018) and my Cherokees ALWAYS had the factory oil leak... That 4.0 is a Golden Child...

@kazansky22 3 года назад

@@blacksheep25251 well it does leak, it just doesn't drip... :)

@milotorres6894 3 года назад

Seepage can't be denied ,just don't mark it's spot on floor.,🤣👍✌️💪🤙🖖😎😁

@picolascage8123 3 года назад

WTF pulls a non leaking,running 4.0 out of a jeep??? Lol

@nephikemper5157 3 года назад

A lesson in every episode. This one: "Leaks" become "seeps" in Jeeps when you keep them dirty enough in all the right places. "Trail broken" to be "driveway trained"? Matt, I'll buy the T-shirt when you fashion my word salad into something terse and marketable. 🤣🤷🏻‍♂️

@dscullion13 3 года назад

"I'm super lazy" continues to rebuild the entire jeep

@steveblankenship5474 3 года назад

With 42 steps in rebuilding the XJ

@0xsergy 3 года назад

i mean, you can hear it knocking a year back. better here than on the trail.

@robertwitcher5113 3 года назад

@@0xsergy All 4.0 Jeep’s knock after 150k 😂😂 they are actual ticking time bombs.

@dustinmeier9753 3 года назад

If you want to know the easiest way to do a job, watch the lazy man do it. He hates extra work.

@guachingman 2 года назад

@@dustinmeier9753 I feel vindicated, thanks

@Wannes_ 3 года назад

You'd surely give our Belgian mandatory car inspection guys a fatal fit , Matt :-D Keep at it !

@ae80typed 3 года назад

That part where Matt explained the whole process of leveling the steering box mount got my mouth agape. Perfect delivery, minimal pauses, sounded so professional. Like listening to an expert trainer/instructor. You're a natural Matt! Try pressure washering(lol) the old engine, I bet it'll be dripping then (of water lol). Like one of the commenters here mentioned, I will also say Thanks for posting! Y'all made my Sunday awesome. :D

@artblakey4159 3 года назад

This episode was all about Matt doing what he loves doing the most: hands on fabrication.

@chubbysumo2230 3 года назад

the wrecker makes a perfect engine hoist.

@741662027 3 года назад

I'm surprised how well that worked! I didn't know you had such fine control over it, with two different pulling cables.

@logicalguy488 3 года назад

Should have removed the bananas hood, would have made it easier.

@jonharris888 3 года назад

I was just gonna say that’s the coolest automatic engine hoist I’ve ever seen.

@chuckstith838 3 года назад

Now we know why you never had a hoist. You have a wrecker.

@pppaybackkk 3 года назад

Anyone who has used both a jack hoist, and a wrecker, to remove an engine knows the wrecker is better. It's just infinitely more expensive if that's all you're going to do with it. It's just most people can only afford the $500 Harbour Freight jack style since they're probably doing exactly one swap in one car for their entire lives. Mechanics that do engine swaps a lot usually have an electric winch on a gantry crane.

@jamesmoody5961 2 года назад

In the south its an old oak tree and a chain hoist in the front yard. Great job improvising ya'll

@robertschoop9978 3 года назад

Thats matt-gyvering at its finest ! ! !

@CloudHindlen 3 года назад

I'm calling it months in advance. Off-road Tow Truck is the new project. Lol

@chuckstith838 3 года назад

But is it a flatbed?

@imchris5000 3 года назад

something like trail mater with 8 winches

@turboponies 3 года назад

2:22 That's why they were testing a Deuce - will it be a good platform for an off-road flatbed.

@Buck1954 3 года назад

@@imchris5000 Why stop at 8?

@sw-xy2so 3 года назад

im thinkin its for the 6x6

@jerrysmicro 3 года назад

I have a '92 Jeep Cherokee 4wd with a 5 speed manual with the 4.0, it has 408,000 miles on it runs great never been rebuilt.

@kingkiller3678 3 года назад

Me too mine is at 200.000 other then that the same

@sandralutz-rodriguez2864 3 года назад

The bananas engine has heavy miles on it from a gazillion rescues

@rediron44 3 года назад

Yea, I've gottdn well over 200k with all 3 Ive had, or still have

@sandralutz-rodriguez2864 3 года назад

@@rediron44 that's awesome! they are solid

@litz13 3 года назад

Nearing 320k on mine

@loosemoose9799 3 года назад

Matt is a world class innovator and fabricator. In the modified words of Hannibal Smith of the A Team, he just loves it when his plan comes together.

@polkukone 3 года назад

thanks for good and nice video. it's been very enjoy watching when im sitting 2 week with hospital to look those video with my father. He died yesterday. Big thanks the whole team to nice moments to watch videos. and warm hug to everyone. Keep the same nice and warm attitude. Sry my bad english Im from Finland.

@snoozeflu 3 года назад

You will have to do MORRVAIR vs. Banana Round 2 - the rematch!

@JeepTrailsandBarbells 3 года назад

Yes, i want to see that as well.

@thatsgottahurt 3 года назад

seems likely, but still everyone upvote, we need to see this when its done!

@chuckstith838 3 года назад

The banana vs the morrvair vs fj at fabrats

@macpumperkinz 3 года назад

I love the lack of brand loyalty you have, just get what works

@torinobob 3 года назад

I thought this was going to be a "toughen it up a bit" project but you're going all in. I'm excited to see the Banana back in action. And all these mods might call for another Banana v MORRvair competition.

@omnipotent3443 2 года назад

Can we take a little time to appreciate that little gem of inline six-engine that has been hummin' in cars like since the mid sixties, and been mounted in cars that todays kids never ever seen or even heard about? Emmission regulations has had engineers reworking the engine for decades while new owners and conglomerates has brought in t h e i r team to tweak the engine up to the standard of times. ...and the engine just kept getting better, cleaner and more economical for each decade. A great engine, and I an happy that MORR appreciates it too and drops a fresh one back in the bay.

@wingmangt 3 года назад

"Believe it or not I don't have an engine hoist" . 30s later comes with a crane :D

@lacucaracha111111 3 года назад

I have something BETTER , A CRANE!

@KenLyns 3 года назад

They have a forklift, too, but the wrecker gives more control with the independent winch lines.

@julioviton9824 3 года назад

I guess your big project is the old army 6x6 truck....hopefully...greetings from Julio your fan from Argentina

@michaelc.3812 2 года назад

STT, you’re bringing back high school memories. First motor I pulled was a VW bug, and I dropped it into my lap. Second was a small block Chevy using a borrowed cherry picker and an engine stand. Good times and fun experience. And I’ve never wanted to do it again since 1977!!

@lonniet.2816 3 года назад

If the engine blows in my 94 Cherokee i know where to get a stroker now. Thanks for all the tips!

@theoutdoorswithsundown4576 3 года назад

This is easily becoming the best channel on RU-vid, can’t wait to see the new project

@dubuque1 3 года назад

When I saw the axles, my mind went to HeavyDSparks channel :)

@davidmacdonald4009 3 года назад

Ever since I learned videos come out every Wednesday, Friday and Sunday I look forward to them so much. These build videos are next level. I still love the recoveries but the builds are my fav for sure. I hope they start something after the banana is done. Rudy’s jeep?

@ChicanoOne760 3 года назад

VGG with cold snacks

@SOLDADITO76 3 года назад

Planetary axles, sweet! Cant wait to see what your building. Using the wrecker worked out well, even looks like it worked better than an actual engine hoist.

@RedrgnX 2 года назад

To help keep your safety glasses from fogging up I suggest you turn your hat around. I am like you and can't go anywhere with out my hat! I have learned to turn my hat backwards to keep my glasses from fogging up as they brim holds the moisture in.

@slateslavens 3 года назад

"Workin' in the dirt like a common criminal" Oh. OH. I guess I know where _I_ stand. I'll have you know I not only work in the dirt, I work in the mud, snow, highway median, roadside ditch, and the common parking lot. I've been wrenching all my life and haven't had access to so much as a garage in the last 20 years. You guys are great! keep up the awesome fun and keep chuckin' the videos up on the 'Tube!

@drew4323 3 года назад

I have that Golen in mine. Noticeable power difference, but she runs even hotter than stock. Cooling upgrades definitely in order.

@gregpallett1839 3 года назад

Garden pump sprayer rigged up to spray/mist the radiator when it runs hot. Or a second windshield washer pump for a tank of water. It’ll work great in that dry air.

@woodennecktie 3 года назад

it seems to be obvious to do so , more power is more gross power and since roughly half the power goes to heat ... do the maths

@pferris3591 3 года назад

Edit: I need to finish watching the video before commenting. 😀

@kovu159 3 года назад

After years of rocky trails and slow crawls I’ve never wanted more power in my XJ. However last month I hit sand dunes for the first time out by Pismo, and with 4 people and a dog in the Jeep I was just powering out trying to get up steep hills. Looking forward to seeing how the stroker does for you, might want to upgrade myself.

@jamesloughran7278 3 года назад

Matt does that while pulling a trailer now.

@kazansky22 3 года назад

Where can you ride dunes in Pismo? I've heard you can drive out on the beach but I didn't know you could ride anywhere else.

@bwinter2625 3 года назад

@@kazansky22 Go south on the beach until you reach the newly installed Park Ranger fence. Turn left and you are on what we used to call the Sand Highway which takes you into the dunes.

@RyanRKJ 3 года назад

That's how I felt about my 3.7L 5cyl GMC Canyon. Never felt the need for more power, until I took it to the Silver Lake sand dunes. I can't imagine trying to tow a wrecked SxS up dunes with less than 250 HP.

@tomhubbard353 3 года назад

And now the envirofreaks plan to close Pismo down even after definitive evidence the vehicles are NOT the cause for dust. Enjoy it while you can.

@mackdarwinian8054 3 года назад

I want to thank you once again. Closed caption is not sucky. Thank you so very much.

@jameslinn6156 3 года назад

that jeep 4.0 is such a reliable bullet proof motor, it does not surprise me that motor block has made it into the stroker rebuild class. What a fantastic motor choice for the BANANA good job MATT

@jefftuseth2819 3 года назад

Much respect! Matt has a great ability to see the things he needs to do to make things work. Very impressive

@jilliansadventures4679 3 года назад

Lol, Rudy's face with the Patsy Cline song reference.

@bruceleealmighty 3 года назад

Yeah, that seemed so uncultured to no know such an obvious Classic Country quote.

@jilliansadventures4679 3 года назад

@Red ROCK always! 😁

@aaronmcconnell7358 3 года назад

When are we gonna see some videos of your family adventures in the expedition? Do you have a channel?

@jilliansadventures4679 3 года назад

@@aaronmcconnell7358 I do. It's small and not great but it does show our adventures. Lol. I'm getting better at making my videos but i have a long way to go. I can't find my new go pro. Ugh.

@aaronmcconnell7358 2 года назад

@@jilliansadventures4679 I will make sure to check them out as long as your getting out there with your kids having fun making memories it's all worth it.

@Arnold7221 2 года назад

Thanks for sharing all the updates, very interesting to see all the hands on modifications and commentary.

@MrNinehunid 3 года назад

I love this channel, what a great set of family and friends

@ameggs 3 года назад

You should tear down the old engine and see how it looks

@jebster8108 3 года назад

Had an 89 cherokee with the 4.0. Original engine and 5 speed were still working fine at 400,000 miles. No rebuilds.

@chadhaire1711 3 года назад

Sure Goober...and you never changed the oil and it has the original tires too.....BULLSHIT

@maverick29 3 года назад

@@chadhaire1711 It is not unheard of in the Jeep community. If it has been maintained properly and hasn't had the snot ran out of it by some idiot, a 4.0 can very well hit 400k without a rebuild. They are one of those engines that were built good from the factory that last.

@jebster8108 3 года назад

No rebuilds does not equal no maintenance. You can believe me or not, don't care.

@yourlame9795 2 года назад

@@maverick29 I’ve seen 15 comments on here where people said they have 400k on their rigs lol coincidence or bullshit ? Lol

@bugworld89 2 года назад

I'm glad youtube can assist with your success, you have originality. Off-road towing is different, i appreciate your niche!!!

@forrestgraves4022 3 года назад

Trevor's song references get the strangest expressions from the crew. I think we need a compilation.

@AeroGuy07 3 года назад

The straight 6 in those Cherokee's were damn near indestructible! 260k miles, most of them off road in the worst possible conditions you can imagine. Rain, mud, snow, ice, you name it, the Banana has seen it all! I grew up in the country, a good strong tree makes a good engine hoist. Also, do you or anyone in the shop have and welding certification, or are you self smarted? (If you get the self smarted line we can be friends)

@dirkditmer453 3 года назад

Fogged or not, at least Matt wore some safety glasses, lmao! High fives guys, looking good 👍

@monkeybarmonkeyman 3 года назад

I once got metal shavings from head porting in my eyes. Trust me, you do NOT want to work without safety glasses. So happy to see these guys being consistent!

@ggazzara1115 3 года назад

Yep, exactly what I was thinking! Safety glasses are good...loosing an eye = bad.

@bruceleealmighty 3 года назад

Bushy Bushy Brown hair dew (orange or red in this case) with Neanderthal eyebrows help to seep and keep moisture in. Of course I'm guessing the AC must be pretty good to help with the condensation from a hot worker.

@lightningstrikestwice6302 3 года назад

Yep! Got to take care of those baby blues baby browns or whatever. You only get one pair! Safety glasses are great insurance. Not foolproof though!

@Precisionreelworks 3 года назад

Man when the title said "Toyota parts in" I figured the banana was getting 2JZ swapped

@94XJ 2 года назад

A 2jz in an off road recovery vehicle? Nah, he needs torque right off idle.

@winstoncryer7606 3 года назад

Thank you Matt looks totally explaining the bumpster and which arm should be level. I watch a lot of other channels maybe wasn't paying full attention but you did it slow enough and full vision explaining thank you

@hydroman99 3 года назад

Lol 10:56 Matt:"It's gotta go down, it's gotta go down..." Trevor: "To the Honky Tonk"

@everythingsucks6086 3 года назад

Catalytic converter thieves!! Haha! I'm from Washington, so that was really funny to me!

@259Den3 3 года назад

I was driving through Reno NV and saw a scrap yard with a 'We Buy Catalytic Convertors' sign. If the scrap yards would have some integrity, require ID, and make payments electronically, it would likely lessen the amount of thefts.

@claytonb7915 3 года назад

"I love it when a plan comes together!" or just wing it! - Matt's strategy for rebuilds ;)

@gordonpeden6234 3 года назад

I'm loving this latest project. Thanks for posting.

@SMKreitzer1968 3 года назад

I pictured Ed saying it's hot, around 100 degrees, but we'll get the engine out! Thanks for sharing.

@politicalfoolishness7491 3 года назад

I've been driving 4runners for 20 years. They've served me well and mechanically they seem to be well engineered.

@lordofh3 3 года назад

5th gen'er here; they may be an 'ancient' design, but they just keep on running like you're saying. heck prior to that i had a taco that kept on running even at nearly 220k miles with no issues, but i traded it because it was a very bare bones model and felt like getting some of the new bells and whistles that are available lol

@iddddaduncan 3 года назад

I've owned 5 4runners and they've all been great vehicles.

@rollinrat4850 3 года назад

I got an '86 Toyota Hilux pickup. Its got about 480,000 miles on it. Most everything has been modified and strengthened for Rock crawling and over landing. The body looks like it's been through a war zone, it's just missing a gun turret in the bed! Just about the only thing left stock are the short block and the steering pump like Matt's. They're still original! This truck is like a cockroach. It simply won't die no matter how hard I beat it and overload it. It always starts right up even after it sat unused for a couple years.

@cenccenc946 3 года назад

2010 FJ cruiser, 2013 diesel hilux, and I use to have a 4 runner at one point. most of the parts are swappable between the three with no modifications.

@Theronj89 3 года назад

I’m happy to see the banana getting some love now that the moorvair is in action. Love the content all around

@rondogwil 2 года назад

The "walking after midnight" part at 15:11......hilarious! That's one for the "best of" file.

@bigjay6743 3 года назад

Wow all the videos we seen of that motor being used and abused but always sounded good those 4.0 pretty durable engines.

@40Spec 3 года назад

It makes me a little sad to watch the heart and soul of the Banana be gutted. Now it’s just a cosmetic Jeep with a foreign engine in it.

@andymartell3704 3 года назад

I was sad to see it come out, too!

@lockedin60 3 года назад

I suspect a 5 ton big military type truck will be in the future of Matt's Off-Road Recovery?

@Makitafan 3 года назад

He's gotta compete with Casey's off road recovery. You say how hard it was to pull out that camper rv.

@kensporalsky3784 3 года назад

With a full suspension rebuild

@thatsgottahurt 3 года назад

He did have that massive truck a couple months ago with the video called "did we find are next vehicle" or similar. So yeah, hope to see this. I mean what else would he put those massive axles in? A bit big for a rock bouncer, and way to big for another small truck like the jeep.

@chuckstith838 3 года назад

We did get a preview

@turboponies 3 года назад

2:22 Those are the axels for it!

@allanhover5008 3 года назад

677 thousand subscribers outstanding Matt and crew and Lizzy as well your wife and kids too and camera crew too 👍👍👍👍👍👍👍

@TinkerTweakFPV 3 года назад

looking great! Love the fearless cut and weld attitude, best way to get things done!

@snyderstrailsidedesignchad6854 3 года назад

I’m hoping those MRAP axles are for the winch truck, because your gonna make it 4 wheel drive

@johnnyrocket6588 3 года назад

Eventually, they should make a military humvee apart of the fleet.

@anaikgill2937 3 года назад

Didn't he say in that video with that 6x6 truck he was going to make a 4wd version of the wrecker?

@squatchpnw2331 3 года назад

That's gotta be it, making the winch truck 4x4

@robedmund9948 3 года назад

@@anaikgill2937 I thought I heard them say a bus..........

@jordanholmes9943 3 года назад

There was talk of widening one of those corvair pickups to turn it into a wrecker. That’s where I think those axles are going.

@TheFoMoCo1903 3 года назад

I've used my wrecker a few times for this, wreckers are really nice for pulling motors out of boats

@ToyotaandDodgeGarage 3 года назад

Who needs a hoist when a tow truck is around! That's way better than a hoist! That new 4.6 is going to be awesome! Y'alls videos are better than any TV shows.

@4sl648 3 года назад

If I had a wrecker I would not need an engine hoist. 4.0 L Jeep engine and drive line was such a success. I have had a few over the years and they were reliable well beyond the sheet metal in NE. The burble of the 6 is distinctive. Long live Banana.

@kenpressley8420 3 года назад

"Walkin' After Midnight" by Patsy Cline. Love the reference.

@torygyberg8837 3 года назад

Love these garage bits just as much as the recoveries!

@jasonmalone155 3 года назад

Love the videos where you are building and improving vehicles. Not other channels doing that, just your channel!

@haydenuk02 3 года назад

Brilliant work and thanks for sharing this with us take care

@daveg4963 3 года назад

Those Yota transmissions are awesome!

@iFNhU 3 года назад

I'm ready to see what that project is. 😘

@nicolehixson7240 3 года назад

5 ton?

@Danwheeler. 3 года назад

@@nicolehixson7240 wouldn't be surprised if it's something along those lines

@azrider2011 2 года назад

As a young teenager driving my 46 Willys with a completely worn out steering box and a half a wheel play with a challenge to keep straight driving down the road a friend recommended the Chevy box which has the bump on the side and nothing is flat and replace that got everything hooked up drove it down the driveway and realized that I had put or not put the Pitman arm so you would turn to the left and rotate to the right my brother came home and I let him drive I drove it around the block just once backwards very entertaining time in my life learning about mechanics and what works and doesn’t work I enjoy watching you deal with issues of Offroad it was very difficult and challenging on a vehicle. I learned a long time ago if you want to race car, bike off-road vehicle you got to work on them to keep them in top condition

@romanestillore8857 2 года назад

Hi Matt, Greetings from the Philippines! You’re channel is a trove of practical knowledge. You’re a nice person and a great dad. To me, you embody the great American worker -honest, driven, always the go-and-get-it-done type.

@cg5562 3 года назад

Everyone here works so hard. Unreal.

@uggy7 3 года назад

We ole farts really enjoy your videos Matt and family. To tell the truth we are jealous of your knowledge and skills because we couldn't even fix a flat tyre.

@ClimbAClassic 3 года назад

Thank you for the details - very informative and helpful to see how things are fabricated

@denniscasey986 3 года назад

Superb tutorial. Thank you.

@RogueOverlanders 3 года назад

i built the stroker in my jeep, cant wait to see this in action!!!

@richardthomas1743 3 года назад

Good morning and thumbs UP !

@dangilbertson9040 3 года назад

Thanks Matt, I am remember my first engine swap, I pulled the engine and transaxel out of my 61 Corvair and put it into a 64 I found in a field in S MN. Did it in a farmers yard using a bucket loader. Great fun for a 16 year old Kid.

@derikdrinkle2084 3 года назад

Another great build. Looking forward to seeing the outcome ☺️

@98FleXJ 3 года назад

Plate the outside of the driver "frame rail" and mount the steering box on studs. Easy on and off, and no through bolt to line up.

@logankolby13 3 года назад

That's the first time I think I've heard bleeping out on this channel, but of course it's the kind of bleeping out that make some want to hear what's behind it

@jblob5764 Год назад

"what did you do" at the sight of the MRAP axles lol

@CarswithNash 3 года назад

Nice progress. Glad to hear there will be more projects like this on the channel.

@CaseyLaDelle 3 года назад

Hopefully it's an off road rollback! That is high on my list of things to build!

@walttrotter535 3 года назад

We don' need no stinkin' hoist!

@jmdoutdoors5729 3 года назад

Great choice on the Toyota parts. Great job guys. Thank you very much from California.

@keithtaylor6069 2 года назад

Answered my question, thanks. Love that inline 6

@mb14u2c2 3 года назад

I love the “caution children at play” sign on the garage 😂😂😂

@LS1MIATA1775 3 года назад

Mrap axles??? Man now im really curious about that other build!!

@lesr5737 3 года назад

Hey there Lizzie, I do believe that that is the best weather report you've ever given it added to the storyline of you pressure washing, we would not have realized the conditions of your job that you were doing without it

@ntrpryz1 2 года назад

I’m really glad you didn’t get rid of the Jeep. I’ve owned Jeep’s my whole life and I’m 60 I also worked for Jeep dealerships for 20 years.

@arp4744 3 года назад

“A WINCH!” I thought you didn’t like winch’s and now the banana will get one.

@corbanlee8157 3 года назад

Think he doesn't like installing winches seen Matt use them alot on his videos 😂

@mykelbaurle5758 3 года назад

Probably Rudy’s idea.

@SegoMan 3 года назад

To own a 4x without one is insanity..

@IronmanV5 3 года назад

Saw the title and thought you might be putting a 2JZ in the Banana😲 Heads would explode over that!😂

@manuelfredpangco5744 3 года назад

You know what would be a better engine swap 4.2L straight 6 diesel from the 80 series land cruiser

@iadr 3 года назад

@@manuelfredpangco5744 give your head a shake. IDK what mind virus gets people into diesels, but wow, dumb idea. Diesel fans seem to be into the TURBO, and unable to differentiate the two. Drive a Gasoline turbo, and it'll clear your head.

@IronmanV5 3 года назад

@@manuelfredpangco5744 Except that Matt has already said that he goes with gas engines for weight reasons. Probably be a bit harder to find parts for the 1HD-T as well.