Jon Boat Electrical Wiring for Beginners and DIY'ers

Подписаться 44 тыс.

Просмотров 397 тыс.

50% 1

Jon Boat Electrical Wiring for Beginners and DIY'ers
Project Bottomland Bateau: Episode 17
Want to master the electrical wiring system in your duck hunting, catfishing, bow fishing, or bass boat build? This is what you need right here. We cover everything about what wire to use, wire sizes, amp ratings, connectors, solder joints, running wire, fuse panel set up, batteries, and much more. And as always don't forget to stick around to the end of the video for the bloopers and the hater's corner!
EVA Foam Turf Decking used in this boat build:
www.hydrodeck....
Buy Send It Jon Boats Shirts, Hoodies, Hats, Decals here:
thejonyacht.co...
Check out great deals and discounts from our channel sponsors:
5% off promo code for Tiny Boat Nation Outdoors, for all your boat building materials and accessories.
Visit www.tbnation.net
Use promo code: FULLSENDUNICORN
10% off promo code for Freedom Lube, The most American oil you can buy!
Visit www.freddomlineproducts.com
Use promo code: ATF10
Link to One Hit Wonder Paint:
www.ohwpaint.c...
Get 5$ off your OHW order use code: ATFHYDRO
Tin Can Crew RU-vid Channel:
/ @tbnationoutdoors
Camera gear we use:
Camera Lenses: amzn.to/36rcdE4
Camera Mount: amzn.to/2GqMroQ
Flex Mount: amzn.to/2tIDLHY
Flex Tripod: amzn.to/2ux7CTB
Tall Tripod: amzn.to/36xUgUF
Lav Mic: amzn.to/2t27awm
Products used in the boat repair video series:
Kreg Rip-Cut saw attachment: amzn.to/35PHhxq
Jigsaw blades: amzn.to/2DCjLb4
Straight cut router bit: amzn.to/2ODUMut
Wood glue: amzn.to/2R7DxTN
Wood clamps: amzn.to/2Y6aW2C
Fiberglass resin: amzn.to/2qbD5Jl
Chip brush: amzn.to/380rbTN
10X20 Canopy Cover: amzn.to/2Gzyqsq
Standard Rivet Gun: amzn.to/32afGFW
Large Rivet Gun: amzn.to/33rFeyj
¼ Inch Sealed Rivets: amzn.to/2MBQTEb
3m 5200 Sealant: amzn.to/2McyOgP
JB Marine Weld: amzn.to/2B91iC0
Brazing rods: amzn.to/2nGoa8A
Brazing Flux: amzn.to/2OGsgZz
3/16 Inch Sealed Rivets: amzn.to/2zEFoJE
Rivets: amzn.to/2PJwccl
Welder: amzn.to/2C7OLiv
Welding helmet: amzn.to/2WLNY0k
Welding gloves: amzn.to/2PIMRgo
Angle Grinder: amzn.to/2qglTC0
Flap Disc: amzn.to/2qmaMY4
Float Pods: www.explorebea...
22 Inch Light Bar: amzn.to/37zNboI
11 Inch Light Bar: amzn.to/2N2wiJS
LED Navigation Lights: amzn.to/30HJv2J
3/16 Inch Sealed Rivets: amzn.to/2zEFoJE
Grab Bar: www.beaverdamm...
Marine Grade Duplex Wire: tbnation.net/c...
Trolling Motor Circuit Breaker: tbnation.net/c...
Heat Shrink Ring Terminals: tbnation.net/c...
Fuse Panel: tbnation.net/c...
Battery Disconnect: tbnation.net/p...
Switch Panel: amzn.to/3IaMqUn
Watch the entire Project Bottomland Bateau Series:
• Project Bottomland Bateau

Опубликовано:

21 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 814

@Hydrokracker1 9 месяцев назад

"I'm not making this boat look fancy like all these bass boats you see on RU-vid." -Makes the Jon boat fancier than all the fancy bass boats on RU-vid. Seriously, your boat looks great.

@joshuaskirvin Год назад

Industrial Electrician and Maintenance Tech here. I've been in this field my entire adult life. Residential, commercial, industrial and line work. Don't listen to the inexperienced keyboard warriors. You might not be perfect or doing it their way, but it looks good to me. I thought about a way you could've done the control board a little different, but that was just a personal preference of mine. You did a good job. It was a good video.

@SendItJonBoats Год назад

thanks, glad you enjoyed it. Appreciate you watching even though you do electrical for a living. LOL

@CatfishWeekly 2 года назад

After being in the automotive industry my entire life, working on ever thing from ambulances to handicap vans, this is one of the better wiring video's I have seen for people starting out

@SendItJonBoats 2 года назад

Thanks bud! Glad you enjoyed the video, appreciate you watching.

@Catfishbill66 11 месяцев назад

I agree Lyle I just bought my project boat and watching his videos this guy is awesome

@catcher197 2 месяца назад

Gosh this seemd so simple when I first bought the boat. After a few more weeks and a few dead ends, finally getting to doing this wiring seems a bit more daunting to be honest. I am not an electrican by any means and props to you for getting this done so smoothly

@SendItJonBoats Месяц назад

Its like anal, the first time is always the worst, then it gets easier. Wiring ain't hard once you understand the concepts.

@andrewlewis3267 9 дней назад

Awesome video! Just finished wiring my first jon boat it this video saved me!

@John-of5sh 2 года назад

This video was EXACTLY what I was looking for! Never thought about a cut-off switch to shut everything down. It's on my shopping list! You are so right about skimping elsewhere, NOT on marine grade wire! I have one suggestion and you can take it or tell me to shove it. Next time a troll starts giving you shit about what they thought was wrong, etc. simply say "Thank you for sharing that with me." They never know if you are serious or screwing with them. If our paths ever cross remind me I owe you a rack of beer for taking time to share your expertise and time with us so we can get it right the first time. Thank You Sir!

@SendItJonBoats Год назад

I am going to use that line... I would love to see the confused look on Scooters face LOL. THanks for watching, glad you enjoyed the video.

@thedangler1371 2 года назад

I’m an electrician for homes and you did a fine job! Boat and automotive wiring is foreign to me. Great work man

@SendItJonBoats Год назад

Thank you sir! Appreciate you watching and glad you enjoyed it.

@NICHOLASBYRNE3931 Год назад

Does the Copper tinned cable allow increased current carrying capacity?

@anthony445 9 месяцев назад

⁠@@NICHOLASBYRNE3931no, if anything it adds slight resistance but nothing that would change the amp rating of the wire. Tinned is just good to protect from corrosion.

@Oper8or 2 года назад

I stumbled on your channel yesterday. My wife and I watched a few of em. Wasn't looking for boat stuff at all. Spent a few years of my life building boats and jet ski's for a couple of companies though, so I can relate a bit. My wife flat out said "Is he your long lost brother or something because you two act exactly the same". I'm not aware of any long lost brothers but she made a damn good point. I cannot wait to get in here and hurt the scooters feelings. Time to start browsing comments.

@SendItJonBoats 2 года назад

LOL, we could be long lost brothers! Hurt them scooters feelings all you want.... they need a hug LMAO. Thanks for watching.

@jonmcguinn603 Год назад

This is hands down the best video out there for anyone looking to tackle their own electrical overhaul

@SendItJonBoats Год назад

Thanks bud, glad you enjoyed it.

@sethbrown8912 3 месяца назад

As my friend would say, "You are an idiot!" That is his highest compliment in evaluating humor. You are funny and also know what you were doing. Great stuff.

@SendItJonBoats Месяц назад

Man I love being an idiot! LOL I'm very familiar with that term in humor. Thanks for watching.

@freas8520 2 года назад

Well done! Finally someone who parallel connects two 12 volt batteries correctly.

@SendItJonBoats 2 года назад

Thanks Patrik

@davidgodfrey7560 Год назад

Hey, mind telling me what gauge wire you’d recommend using for paralleling the two batteries? Thanks

@freas8520 Год назад

@@davidgodfrey7560 I would just take the same gauge that comes to/from the batteries.

@malibujoe01 2 года назад

One of the best informative boat wiring videos I've ever seen! THANKS for explaining everything you did instead of glossing over stuff! NOT EVERYONE is a professional electrician!

@SendItJonBoats Год назад

Thank you, glad you enjoyed it and learned something. I try to make it easy for people to understand.

@mathewweeks9069 2 месяца назад

Your awesome dude and awesome video be safe out there

@SendItJonBoats Месяц назад

Thanks! You too!

@mathewweeks9069 Месяц назад

@@SendItJonBoats your welcome have awesome day be safe out there

@mikebrannen3567 2 года назад

This was a Great video. I like that you are quick and to the point. No messing around. You keep it simple. Thanks!

@SendItJonBoats 2 года назад

I appreciate that! Glad the video was helpful.

@strinity511 3 месяца назад

This is such a helpful video, thank you brotha.

@scottcarlson2788 5 месяцев назад

Fantastic job explaining the electrical elements of a little build. The mansplainer rant was a bonus. I am rebuilding my 12 ft v-hull once again. This time, to get it lighter and easier to load/unload, I am trying to make everything in the boat removable. I have more time than I have back strength and my favorite boat launch does not allow trailers.

@JoelHanson-xy2ng Месяц назад

Probably the best wiring video on the internet. …rocket surgery, simplified.

@SendItJonBoats Месяц назад

Now your a certified jon boat rocket surgeon.

@Chipndales 7 месяцев назад

I triple shield any wiring I have to run outdoors. So for anyone wondering what that looks like, you have your base insulation + your own added heat shrink/tape + proper looming sheaths. Never had a comeback for wiring or electrical. Never had to rip out or replace a harness in the past 10 years, actually pretty funny my harness was holding a golf cart together after it crashed. Kept the battery from coming out.

@xShark Год назад

Thanks to your video…I completely rewired my entire boat for a 24 volt trolling motor, front and back lights hooked up to the circuit breaker and toggle switch panel. Thanks for the vid!!

@robertjason5215 2 месяца назад

Starting my rebuild on my 15’6 Lowe your videos are extremely helpful

@SendItJonBoats Месяц назад

Glad I could help, appreciate you watching the videos.

@nonyabiz2777 Год назад

Why do folks need to criticize?? I just click off the video if I don’t like it. I watch all your content from start to end. Nice work sir.

@warrenbridges4095 Год назад

I was just browsing through RU-vid looking at different boat wiring videos then I saw the "Reserved for LSU" sign on your wall... Instant Subscription. Very informative video also...

@nsmerilli1 2 года назад

This is the best video I’ve seen to explain wiring a jon boat.

@SendItJonBoats 2 года назад

Thank you, glad you enjoyed it.

@jeffsmathers3007 2 месяца назад

Keep doing what you are doing. I am looking to start a boat project later this year and I found everything very informative.

@SendItJonBoats Месяц назад

Glad I could help. Appreciate you watching the videos.

@Electronzap 19 дней назад

Nice demonstrations.

@JAdame24 Год назад

Man I was going to start wiring my boat today and after watching your video I’m completely rethinking my wiring plans haha.

@SendItJonBoats Год назад

You can do it! It is much easier than it looks.

@TS-eg8dm Год назад

Great video by the way

@SendItJonBoats Год назад

Thanks so much, glad you enjoyed it.

@shanemiller6947 2 года назад

My kid of guys here about time someone smart got on RU-vid telling folks who's boss thanks bud keep up the hard work I love it

@SendItJonBoats 2 года назад

LOL thanks Shane. Glad you like the videos

@lenbrewer9351 2 года назад

Most comprehensive Video I have seen, very neat and very professional work. Thank You

@SendItJonBoats 2 года назад

Thank you Len, glad you enjoyed the video.

@stevea6722 Год назад

Fine job on the wiring. Agree with the statement about NOT grounding the electrical thru the hull but it has nothing to do with electrolysis, if any of your hot wires rub thru the insulation then you have a direct short with a potential for a fire if no circuit protection. Seen it happen.

@SendItJonBoats Год назад

Thats a great point too. Thanks for watching.

@brandondonahue3787 2 года назад

Best boat wiring vid on RU-vid. Thanks so much!

@SendItJonBoats 2 года назад

Glad it was helpful!

@TNelsn-h2y Год назад

Awesome video! I have never messed with this kind of project before. Im not bitching! You taught me something and my kid thinks Im a genius. Thank You

@SendItJonBoats Год назад

Always nice to have your kids believe that you are a genius!

@billroberts8253 Год назад

I enjoyed this I’m 82 years old and I still don’t understand it but I learned a lot thank you for your time in trouble they’ll

@adamj7067 7 месяцев назад

The explanation of the switch panel was just what I needed. Great job!

@toxicpaintball03 6 месяцев назад

Imo this is the perfect layout for a Jon boat on RU-vid I’ve seen

@brucepiggott1493 Год назад

I’m 53 years old. For years I’ve used a lighter on shrink tubing with mixed results. Since my viewing of this video I’m now a owner of a new heat gun! My pragmatic side once to say thanks. My ego once to tell you something else! You’ve taught an old dog……..thanks

@SendItJonBoats Год назад

I love my heat gun, so much better than burning my thumb on a lighter like I did for years.

@lynnharper6291 2 года назад

Hey man, I am almost finished with my 1972 Monarch 14 footer. I watched your videos cuz you do a great job explaining how it. I just have to hook up battery switch and switch panel. I would send a couple of pictures if I can figure it out, thanks for all your videos they gave me the convenience I needed. By the way I hooked my navigation lights up right the first time. LOL.

@SendItJonBoats 2 года назад

Glad I could help

@meangunmorris7677 Год назад

RU-vid certified technician, I knew I was in the right place 👌

@SendItJonBoats Год назад

Master certified... get it right. LOL

@Reeser00 2 года назад

Excellent video! I’ve watched about 5 already and this makes the most sense for my boat! Thank you

@SendItJonBoats 2 года назад

Awesome, glad you enjoyed the video.

@danholloway3840 2 года назад

I just bought my first boat ever (16ft v bottom Jon boat) just something to take the kids out fishing on and I’d have to say out of these boat wiring videos this is one of the best ones!! Keep up the great content!! **Subscribed**

@SendItJonBoats Год назад

Thank you Dan, glad you enjoyed it and I appreciate you watching.

@mte874 2 года назад

This guy rocks and is hilarious 😂😂 fantastic video, thank you! 🤜🤛

@SendItJonBoats 2 года назад

Thank you, appreciate you watching the video.

@BillBirdsall-e6m 6 месяцев назад

Great starter video. Thank you. Just re wiring my aluminium boat with same switch panel. Keep up the good work - from Australia !!

@flippa1976 Год назад

I just came across this vid and found it to be easier to understand than pretty much all the other vids out there and your Scooter comments at the end are are great touch, very entertaining 🍻👍

@SendItJonBoats Год назад

Thank you, glad you enjoyed it.

@bobbydavis9618 7 месяцев назад

Best video I’ve found on boat wiring!! Thank you!!

@KenLoveday70 Год назад

I understood this wiring video better than any of the other videos I’ve watched Thank you for the video scooter can take a hike

@SendItJonBoats Год назад

Glad I could help. Thanks for watching.

@bradritter529 2 года назад

Absolutely the best help video I've seen. Wasn't sure what I would find when I searched. Spot on and easy to follow. Thanks for the laugh as well. Got to love them Scooter's.

@SendItJonBoats Год назад

Thanks for watching, glad you enjoyed it.

@SkunkMonkey991 2 года назад

Great job and thanks for the tutorial. Love the bite back at the keyboard genius haters! Haterade.....classic!

@SendItJonBoats 2 года назад

Got to give the haters some love... they need all they can get.

@SOFAKINGDEAD13 2 месяца назад

😂 “plop your happy lil chocolate starfish down” 😂

@SendItJonBoats Месяц назад

Apparently I'm the only person that calls it a chocolate wrinkled starfish.

@DavidSanchez-cd7fz 2 года назад

Great video. I’m doing boat wiring and just bought marine wire because of your your advise. Thanks man

@SendItJonBoats 2 года назад

Glad I could help, you will be happy with marine wire, I am glad I spent the extra money on it. Peace of mind

@kencrump9661 Год назад

I came here to double check my work, but just needed to say your intro is great, had me not skip to the wiring part... that says a lot.

@davedavies6518 Год назад

Great work, all looks very professional and very clearly explained. I would have put each sump pump on it's own fuse not wired together. This way if one sump blows a fuse you will still have the other. This may not be necessary but, gives an extra layer of safety. Thanks for posting such a pro video.

@amberlloch1 5 месяцев назад

Thanks for putting me on the solder wire connector game!! These things are awesome!!

@jasons4586 Год назад

as a beginner, learned a lot. thank you.

@SendItJonBoats Год назад

Awesome, glad I could help. Appreciate you watching the video.

@codyplaisance3505 8 месяцев назад

Love your content bro keep it going

@that1had2hurtvr81 Год назад

I don’t really sub to people on RU-vid, but you earned one today. This video is a huge help to wire up my future ex Jon boat. Not only was it informative I am SO glad I stayed for haters corner. I laughed harder at the see cashier comment than I rightfully should have. The moose comment was one hell of an escalation lol Great video!

@SendItJonBoats Год назад

LMAO, thanks for watching. GLad to have you as a sub. More videos coming soon.

@timestes7090 3 месяца назад

Love the kiss methods, Love Haters Corner. Keep up the good work.

@SendItJonBoats Месяц назад

Keeping it stupid since 1987!!!! We love it. Thanks for watching

@OuzoLouGarage 2 года назад

Thanks for explaining about car wire and the difference of boat wire.

@SendItJonBoats 2 года назад

Glad I could help

@tomjoad1060 2 года назад

thank you for the video! nice sense of humor...))

@SendItJonBoats 2 года назад

Glad you enjoyed it!

@jamesrigg3247 2 года назад

Perfect timing Im currently doing my wiring very helpful thank you!

@SendItJonBoats 2 года назад

Glad I could help, thanks for watching

@jesseauer7649 2 года назад

Yeah, I’ve got some wiring projects in my future too. Thank you Send it!

@StefanWoldekidanKunskapsskolan 2 года назад

Hahaha! Haterade(sorry for the spelling)! Brilliant and way to tackle haters. Rest of the vid is super, I learned a lot.

@SendItJonBoats 2 года назад

LOL thanks for watching, glad you enjoyed it

@haroldbolton3383 2 года назад

Very much enjoyed the scooter section, thanks for the wiring info as well.

@SendItJonBoats 2 года назад

Glad you enjoyed it, thanks for watching.

@graintrader8000 7 месяцев назад

Great play by play explanation! I'm building a boat and your example will help me out a lot.

@fourstarrjim 2 года назад

Great info. Thanks fir explaining the difference between marine wire and automotive wire. All this time I thought I was just being ripped off. I really like the battery disconnect switch: I need it install one on my duck boat.

@SendItJonBoats 2 года назад

I thought the same thing for years until I actually researched it, and then experienced some wire issues myself from using automotive wire. The battery disconnect is awesome, and not expensive either.

@calebgoins1 2 года назад

@@SendItJonBoats yea man thanks fir this video I enjoyed the information. Not to be a scooter but thanks fir everything you’ve taught me here. Fir the first time I actually understand how to wire up everything fir my boat. Fir the record I think ur boat is awesome it’s a perfect boat fir gettin out on the water and fir havin a good time. I think I speak fir everyone when I say this keep up the good content.

@codybreeding7718 8 дней назад

As a professional technician I use a lighter on heat shrink all the time lol I have a heat gun too but a lot of time I can’t fit it in places without overheating something else customers don’t like melted trim or plastics so I got it quick with a lighter but hold it close in the blue part of the flame and keep a good motion it didn’t leave any soot at all on mine I use those solder heat shrinks a lot and even works with them again without soot or overheating the heat shrink just need to know what your doing and a lighter work fine lol love you video tho I am wanting and wishing to get my first boat I want a job boat and build it into a mini bass style boat I just live in an apartment so I can’t get a boat but I love your information on wiring thank you

@delricoeppes 2 года назад

good job and super funny

@SendItJonBoats 2 года назад

Thank you!

@arcturusbbqsausagemaking2435 2 года назад

Great video... Scooter Corner lol ! Dude if I win the lottery I'm buying you a new boat+ Cash

@SendItJonBoats 2 года назад

Deal! Thanks for watching!

@fadedculture7507 6 месяцев назад

Gotta be a Marine. From the crayon references to the range reference in “send it”. Love it! Keep pushin bro. Comments can pound sand

@drap2010 2 года назад

I don't even have a boat...I just enjoy your videos 🤣🤣🤣🤣🤣

@12Deathcon Год назад

You did a great job and the advice given is A grade, as someone who does a bit of automotive / marine wiring / instrument wiring. The only thing I generally do differently and its just a me thing.. I'll use glue lined heat shrink, liquid electrical tape (LET) and dielectric grease. If i cant use a glue lined piece of heat shrink ill paint the cable with the LET and slide the shrink over when it goes tacky. If its a solder joint with no glue lined ill put dielectric grease over the joint, then LET and then the non glue lined shrink. Ill also grease all terminals I am connecting (even auto plugs) to reduce the corrosion chance between the metals... Nothing worse than going to remove a panel or fix a term and everything has corroded together. on a side note and amazingly enough...When you were talking about the grounding to hull. I wired my mates Stacer Seamaster 519 last year and was horrified to find that they do a negative hull set up with a stud welded next to the battery and under the console. I questioned Stacer and got told because the engine (Yamaha F115) has a sacrificial anode in the engine and a second one on the trim plate the hull wont become an anode. We only run in brackish and salt water... the hull is showing signs of minor anode corrosion where the coating has been worn away with the beach landings we have done... Go figure Keep it up, love the channel

@patsmith1783 2 года назад

Love the Haters portion ha!ha!....... Come to Alaska during the winter !!! I've seen light bars on everything , Hard Hats , bicycles , Mini Van's, and a few Subaru's with them mounted right in the middle of the hood lol ......... Oh but you know you also can never have to many either , you evidently need them for fog lights , at least one the bumper , some in the grill , a great big 60" on the top of the cab and don't forget about back up lights!!!! lol ........ all for a daily commute on a populated 2 lane highway!!! Oh by the way don't forget to upgrade those boring factory head lights to HID's !!!! By the way, that boat turned out really nice !!!!

@SendItJonBoats 2 года назад

Heck no Alaska is waaaay too cold for me. Even in the summer. I need those 110 degree days in georgia.

@Threee_Eyez 4 месяца назад

Thank you very much sir, exactly what I was looking for. Very well made instructions and thoughtful for newbies.

@johnnyspropshop 2 года назад

Great video, made it to Haters corner - Subscribed. Thanks to all the Scooters.

@SendItJonBoats Год назад

Welcome aboard! Glad you enjoyed it, appreciate you watching.

@the900bot Год назад

This video is the one that does it best, even tb nation and Anthony’s videos all bring a confusion aspect to it all This is through and through understandable and great work

@SendItJonBoats Год назад

Thank you so much, I am glad you liked the video. I try to keep things simple and easy for people.

@thegrumpybusinessman3400 2 года назад

Big love from the UK. Great helpful video. The haters section was amazing. I’m crying lol 😂

@SendItJonBoats 2 года назад

well hello from across the pond! Thanks for checking out the video!

@apope2311 2 года назад

Hilarious dude, so much respect. Just inherited a boat dad had taken apart to re-wire, rn I’m working on my license.

@SendItJonBoats 2 года назад

Nice, good luck with the wiring, I hope the video helped some.

@tkevin849 2 года назад

Even we are manufacture of bilge pumps, learned more from this great video

@SendItJonBoats 2 года назад

Awesome thanks for watching.

@davidcobb4527 Год назад

Lmfao!! Thanks brother, loved your video. Especially “haters corner”! There ain’t no pleasing everyone. And if they’ve got better ideas, then tell to step up and make their own vid!! Awesome content, love it!!

@SendItJonBoats Год назад

Thanks David, appreciate you watching. Glad you got a laugh out of the haters lol.

@macmc6590 2 года назад

Very good detail! While also being very entertaining! Perfect!

@SendItJonBoats 2 года назад

Thanks for watching! Glad you enjoyed the video.

@hondo8245 Год назад

I had 14/3 left over so I just used my romex, I just pulled the black and white wires and used liquid electrical tape to seal it from the elements, has worked so far for me, great video

@aaronsouthern3300 Месяц назад

Shit man, now I’m certified! Great video

@SendItJonBoats Месяц назад

Next time you go to homedepot, show them your RU-vid certified master boat builder card! You get free coffee lol.

@rockydubois2418 Год назад

Jon boats are so easy to rewire. I’m jealous as hell. I have to cut multiple access holes and buy inspection hatches just to find the wires in my old foam filled center console Henry O

@SendItJonBoats Год назад

Ughh that sucks cutting access holes. Jon boats are so easy.

@razzso1482 2 года назад

Love the Content!

@SendItJonBoats Год назад

Thank you. Appreciate you watching.

@Anonymous99997 2 года назад

“Calm down, Trainwreck. This is not your station.” Perfect.

@SendItJonBoats 2 года назад

LOL, thanks for checking out the video.

@BuCkYwUcKy123 2 года назад

Dude you are the best!! Love that you are partnered with the jon yacht too 👌

@SendItJonBoats Год назад

Yes sir, good people and they make good stuff! Thanks for watching

@johnwilliamson5684 2 года назад

Love the scooter responses best!!!! Seriously good info

@SendItJonBoats Год назад

Glad you enjoyed the video. Thanks for watching.

@ME-qq2dc 2 года назад

Nicely explained, cheers mate from Australia 👍

@SendItJonBoats Год назад

Thank you, appreciate you watching all the way from across the pond.

@terrykleier5068 Год назад

Always enjoy the scooter summary

@SendItJonBoats Год назад

Awesome, thanks for watching.

@MrKNOX2k Месяц назад

The intro was the greatest 😂😂😂😂😂

@SendItJonBoats Месяц назад

Lmao, glad you liked it. Thanks for watching.

@tonyspoon795 Год назад

I'm new to your channel I look forward to seeing more video this wiring helped a lot I just wired my pontoon and after seeing this video I don't like the way I did mine so looks like this weekend I'm redoing the wires on my new switches and put battery kill switch on it and a breaker on the trolling motor thanks for taking the time to make this video very helpful thanks and I don't understand people why they want to tell you that you did it wrong some people are just stupid and like I tell my nephew all the time you can't fix stupid thanks again my friend for the help on the wiring .Tony from Easley SC

@SendItJonBoats Год назад

Glad I could help. Appreciate you watching the video, hope you learned something helpful.

@brucenilssen1235 8 месяцев назад

Excellent video. Very well explained. Thank you.

@kurtshinn9498 Год назад

I knew most of the stuff you did but I thank you for the other stuff I didn’t know. Thanks

@stco2426 Год назад

Nice. Glad you tuned down the music when you were speaking. Appreciate that.

@SendItJonBoats Год назад

Thanks, appreciate you watching the video.

@deep6predator1 2 года назад

you rock scooter. i'm hooked. love your electrical wiring for me (beginners) loved the scooter ending

@SendItJonBoats 2 года назад

Thank you!

@chrisj2713 2 года назад

Great vid. Thanks for taking the time to break it down.

@SendItJonBoats 2 года назад

Glad it was helpful!

@paulvanderbeek3761 2 года назад

Hi just started building my own boat and with your video's give me lot of tips how to do things. Thanks and keep it up .

@SendItJonBoats Год назад

Great to hear! Appreciate you watching.

@kevintidwell7156 Год назад

Your boat is going to suck

@paulvanderbeek3761 Год назад

@@kevintidwell7156 that is very nice of you lol thanks

@haroldmitchell92 Год назад

thank you so much for this video it helped so much

@SendItJonBoats Год назад

Awesome, glad I could help.

@Top10BestCreators 8 месяцев назад

thanks so much this helps a lot!

@brunocauin Год назад

Bro, f**k the haters! Your wiring looks awesome. Great video! 👏👏👍🔥

@SendItJonBoats Год назад

Gotta give the haters some love my man.... all fun and games! Thanks for watching

@dakkedankos4116 2 года назад

Great video! I have 30-year-old marine wire on my old boat, it still works. The previous owner did all the Chartplotter wiring with normal wires, 2 years later it all failed and roasted the Chartplotter. Always use marine-grade electrical components and wiring.

@SendItJonBoats 2 года назад

Thanks for sharing, I try to tell people all the time that marine grade is worth it.