Junkyard One Ton Swap TRUE Cost? - Big Flex and Big Shocks

Подписаться 17 тыс.

Просмотров 9 тыс.

50% 1

This video will show you the TRUE DIY cost of one ton axles part by part in 2022-2023 with inflation. Watch this video to understand the cheapest way to swap quality axles and brakes into your Jeep…and did I mention 14 inches of travel?
Please SUBSCRIBE to show your support! It's FREE and allows ne to continue building things to provide you guys with good content and work toward the vehicle giveaways!
Check out my website to see the brands I choose to support!
WarPaintoffroa...
***Total Costs are broken down in video. I was going to list them here…but wound up putting it in the video.***
***Disclaimer*** This video is just meant to show how I do it. Injury may occur by trying to replicate what is in this video. Attempt at your own risk, with proper equipment and training.

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@dans5371 9 месяцев назад

Leaf Spring JKU is the greatest thing I have ever seen! I have an 07 JKU that was 2wd and converted it to 4wd.

@WarPaintOffroad 9 месяцев назад

Fantastic!

@Channel_1728 7 месяцев назад

Wow great I needed this for my direction on a LS swap on a Jeep j-10 Now I know how to get pumpkins to line-up with Vortech 6.0 and 80l and how to do suspension in a path to successes .

@WarPaintOffroad 7 месяцев назад

Honestly, it might be best to just retube the diffs. It’s not all that easy…but it allows you to put them where you want. And if it’s fairly close to the factory position, there are axle shafts out there that allow you to cut the splines to the length you need. Otherwise you’ll need custom shafts. And all of that gets costly.

@TomSmith-nx3hx Год назад

Well done. I love seeing your technical content. That is a cool Jeep.

@WarPaintOffroad Год назад

Thanks brother. Planning the next build right now…

@charlesboetel1324 Год назад

Ultimate d60s come with brakes, crunch the#s on an ultimate front 60, good short arm with db3" brackets etc bought used/ deals/amazon returns. Then 14 bolt leaf sprung rear. Having built long travel leaf spring setups on rigs in the past, the main issue is front axle control under hard braking on the street.

@WarPaintOffroad Год назад

Ultimate Dana 60’s do come with brakes. But that doesn’t allow the jeep to push enough fluid to make them work. That’s what I was referring to. It’s not a cost benefit over building it this way. And controlling it isn’t bad. Depends how it’s set up. I’m sure you know, you can’t have everything. The more you build it for offroad the less well it drives on road and vice versa. It’s why drag cars don’t make good autocross cars, etc. its just part of the deal.

@charlesboetel1324 Год назад

You can get close , after a lot of sprung over yj, cj, toyotas on jeep springs, even a willys wagon on a wagoneer frame with nearly identical springs wheelbase and weight to maple leaf, I am just saying that this was the hiccup and we often added links to control it. Love the build and the idea, REAL JEEPS HAVE LEAF SPRINGS!....... GET OFF MY LAWN YOU YUPPIE? HIPPIE? COMMIE? WHATEVER?

@full_metal2452 Год назад

Keep up the great work👍👍

@MrGunPilot 9 месяцев назад

Good rundown.

@WarPaintOffroad 9 месяцев назад

Thanks for the support!

@SuperDad1776 Год назад

Damn it turned out so good!!! Great job!

@WarPaintOffroad Год назад

Thanks man! Turned out really good. Really happy with it. Lots more to film about this Jeep. And time to put it on some big rocks!

@mikes4x4garage Год назад

Great job, cool to see something different!

@WarPaintOffroad Год назад

Thanks! Planning the next build right now!

@StormbornJKU Год назад

The biggest caveat to the leaf spring build cost, is that you need the knowledge and the tools and ability to actually do all that stuff yourself. If you had charged him labor for all of that and added those costs for the hours and hours you put in then that cost would increase a good amount.

@WarPaintOffroad Год назад

Absolutely! But that is exactly why I made the build series. To show everyone who is interested how to do it step by step. It’s not hard when you have someone to show you. Regearing…etc…and even the spring set up. I made videos about all of it and I’m always available for questions. But even with that said, buying a set of store bought axles, tires, wheels, driveshafts, brakes, etc would have been way more. And if you couldn’t build it all…you definitely aren’t able to install it all. So there would STILL be labor involved in top of more money up front.

@TomSmith-nx3hx Год назад

I think the point of his videos and this series IS to do it yourself. It ain't rocket surgery.

@TyceFerwerda Год назад

@@WarPaintOffroad Excellent. As you know, Ive been waiting. Another caveat is doing a coil build is more difficult than leaf either way...DIY or paying someone...

@n3tfury Год назад

@@TomSmith-nx3hx This. Alex not thinking with his cranial turret.

@maplehoodunicron1 Год назад

$500 for the front, or did I miss something??? I have been looking and finding front 60 and rear 14 for about $600 for both.

@WarPaintOffroad Год назад

Then scarf them up! You can’t find them anywhere near that in most places. Even junk yards sell the Superduty Dana 60 for about $650

@jrodp3992 Год назад

How did you set your caster and pinion angles. Thanks for the video

@WarPaintOffroad Год назад

So I just bolted the leaf springs to the axle but didn’t weld the perches in initially. I left the u bolts loose enough so I could put a jack on the pinion and move it. I then put it on wheels and tires and set the rear so it was pointing directly at the back of the transfer case and the lowered it 2°. I set the front according to caster. I did it a similar way and shot for 5°. The axle likes to have more..but drag link clearance with the leaf made me put it at 5°. Once it was set I tack welded the perches…took it back apart, and finish welded. Hope that helps! Thanks for the support!

@TwoFeatherChannel Год назад

know of anyone who did the 1 ton swap on the JL Rubicon without any computer issues? Wayalife did it on his first JL and had issues with the computer/FAD, that the Tazer program couldn't fix

@WarPaintOffroad Год назад

I know a number of people do them…but I’m not sure exactly how to fix certain issues with those. But it’s definitely doable. People swap them all the time.

@bobs3407 Год назад

Show the on-road body roll of long leaf springs, no sway bar. Did you try to compare junkyard axles to Dynatracs? Different customer. Turn key vs. hours

@WarPaintOffroad Год назад

The on road body roll isn’t bad at all. I mean no one is taking a jeep like this around highway exit ramps like a race car. But it’s less than my jku with 3 link long arms and sway bars. Of course it’s a different customer. But that is my point…it’s not as “turn key” as people think. LOTS still need to be done. And when the hours are your own spent in your garage as a fun hobby…that is a “cost” people are more than willing to spend. Plus, the extreme rock crawler side of this sport is just as much a mechanic sport as a driver sport..sure there’s people that just spend the cash.. but most don’t and build their own stuff. So yes, different customer. This whole channel is about the guy that builds…not the guy that turns catalog pages and dials a phone number.

@TyceFerwerda Год назад

I posted this in my DIY 4x4 group and somebody said "not a fan"... Because of no bump stops. I'm guessing no stops...since you're still in kind of test mode?

@WarPaintOffroad Год назад

That day was to measure for bump stops. I think I mentioned that early in in the video. The jeep has bump stops now in the rear. Ram put of time to set them up in the front before this next trip. But they will be installed in the front too. This was literally just a test day to flex it out and see where to set bumps…among other things.

@johngeorge5836 Год назад

14” travel Bilsteins? Can you provide part numbers?

@WarPaintOffroad Год назад

Hey! So it’s Bilstein 33-185576 Just keep in mind they don’t install like the factory shocks did. You’ll need different brackets on the frame side.

@7_slot_fawkes698 Год назад

So you did a grizzly rear locker with tone rings and sensors in the rear?? How’s the computer liking that? Because with 12+ Jks I’ve always read you can’t run a auto locker like a grizzly because the computer will freak out. So how did you get around that?

@WarPaintOffroad 2 месяца назад

@@7_slot_fawkes698 so super late reply..for some reason I didn’t see this until now., but the computer was fine with it because it was an 07 Jku.

@ElevatedVehicles Год назад

How wide are your buddies axles that's on leaf springs WMS

@WarPaintOffroad 2 месяца назад

@@ElevatedVehicles same as a standard Superduty Dana 60. 72 inches.

@ElevatedVehicles 2 месяца назад

@@WarPaintOffroad very cool

@justinrobinson4394 Год назад

What rear track bar did you go with? My stock track bar is a few inches to short. Im running the 14 bolt in the rear.

@WarPaintOffroad Год назад

On the leaf spring rig it didn’t need a track bar. On my rig I used a core 4x4 track bar that I had on my Dana 44’s. I will say that the rom steering track bars work really well. I’ll be swapping to their soon enough.

@justinrobinson4394 Год назад

@@WarPaintOffroad Awesome thank you!

@johncasale466 Год назад

What bolt in roll bar do you have in Warpaint??

@WarPaintOffroad Год назад

I did a RU-vid video about it. Believe it or not, it’s made by smittybilt. I like it better than the other bolt in options and it’s cheaper too.

@johncasale466 Год назад

@@WarPaintOffroad Nice! Thank you so much I’ll go look for the video and watch it.

@matty86suk Год назад

That drag link looks sketchy as heck with the bolt that long.

@WarPaintOffroad Год назад

It’s actually very strong. The bolt is HUGE diameter wise and has almost no pressure on it because of the hydro assist. The only other way to do it would be to get a high steer knuckle that has a too plate and send it over the leaf spring that way. But tbh, it works perfect. I toyed with the idea of making it double sheer and adding more steel…and still might eventually. But like I said, it has almost no pressure on it and the bolt has a 30,000 pound sheer strength. If it didn’t have hydro steering it would be different.

@merritts3515 Год назад

I wanna see more, going fast, more crawling, ride comparison,

@WarPaintOffroad Год назад

Oh yea! All that is coming for sure! We are heading to Utah this week. When we get back we will be doing comparison’s to my jku with the same axles and 3 link long arms with this Jeep. It’s coming for sure.